cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 42

Question 410

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A factory adds VLAN 30 for scanners but copies VLAN 20's IP subnet into its MX configuration. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.
  2. Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.
  3. Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
  4. Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
  5. Compare assignment rules, managed app status, device OS support and a controlled installation attempt.

Explanation

Correct Answers

A:

The discriminating evidence is: Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.

B:

The targeted next step is: Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design. The technical reason is: An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication. A successful verification would use: Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.

Incorrect Answers

C:

That action is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific MX VLAN interfaces and DHCP configuration requirement.

D:

That evidence is relevant to the distinct Meraki subject of Static route next hop and VPN route preference, not the specific MX VLAN interfaces and DHCP configuration requirement.

E:

That evidence is relevant to the distinct Meraki subject of Managed app rollout and assignment scoping, not the specific MX VLAN interfaces and DHCP configuration requirement.

Question 411

A Cisco Meraki deployment engineer investigates this operational case: A branch client receives an address from the wrong DHCP scope after technicians connect a switch port to a new VLAN. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Define the source, destination, application and placement of policy controls before mixing SSID, VLAN and MX L3/L7 rules.
  2. Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.
  3. Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.
  4. Review the change history and intended template state when a branch differs from its standard design.

Explanation

Correct Answer

C:

The targeted next step is: Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific MX VLAN interfaces and DHCP configuration requirement.

B:

That action is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific MX VLAN interfaces and DHCP configuration requirement.

D:

That action is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific MX VLAN interfaces and DHCP configuration requirement.

Question 412

A peer reviewer evaluates the following Meraki case. A branch client receives an address from the wrong DHCP scope after technicians connect a switch port to a new VLAN. The proposed action is: Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Guest portal acceptance and guest VLAN isolation are separate controls; both need validation for a working secure guest network.
  2. An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication.
  3. BGP route propagation requires a supported device and configuration and explicit policies; a working VPN tunnel alone does not prove BGP exchange.
  4. Uplink traffic shaping and performance-based preferences can influence selected flows but require accurately matched policies.

Explanation

Correct Answer

B:

An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication. In this situation (A branch client receives an address from the wrong DHCP scope after technicians connect a switch port to a new VLAN.), it justifies the action: Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific MX VLAN interfaces and DHCP configuration requirement.

C:

That principle is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific MX VLAN interfaces and DHCP configuration requirement.

D:

That principle is relevant to the distinct Meraki subject of MX SD-WAN traffic preferences and shaping, not the specific MX VLAN interfaces and DHCP configuration requirement. For this scenario, the proper response is: Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design. Verify it through: Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.

Question 413

A Meraki support engineer must distinguish facts from assumptions. A branch client receives an address from the wrong DHCP scope after technicians connect a switch port to a new VLAN. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.
  2. Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
  3. Inspect classification, configured rules, uplink loss/latency and a sampled flow before and after a test.
  4. Compare source and destination prefixes, default routes, traceroute or path checks and policy events.

Explanation

Correct Answer

A:

The discriminating evidence is: Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability. Expected result: Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific MX VLAN interfaces and DHCP configuration requirement.

C:

That evidence is relevant to the distinct Meraki subject of MX SD-WAN traffic preferences and shaping, not the specific MX VLAN interfaces and DHCP configuration requirement.

D:

That evidence is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific MX VLAN interfaces and DHCP configuration requirement.

Question 414

An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch client receives an address from the wrong DHCP scope after technicians connect a switch port to a new VLAN. The proposed validation is: Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources.
  2. The automation reads its permitted network data and denied operations remain blocked to unauthorized identities.
  3. The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic.
  4. The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage.

Explanation

Correct Answer

A:

The acceptance criterion is: Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources. Verify it using: Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of Meraki Dashboard API authentication and scoped permissions, not the specific MX VLAN interfaces and DHCP configuration requirement.

C:

That outcome is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific MX VLAN interfaces and DHCP configuration requirement.

D:

That outcome is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific MX VLAN interfaces and DHCP configuration requirement.

Question 415

A Meraki operations reviewer examines this case. A branch client receives an address from the wrong DHCP scope after technicians connect a switch port to a new VLAN. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Make a help desk alert reviewer an organization owner solely to view a client event timeline.
  2. Place the same IPv4 gateway address on two unrelated VLAN interfaces and expect unambiguous routing.
  3. Publish an internal private app to every personal BYOD device regardless of the organization's consent policy.
  4. Disable all MX content filtering and intrusion prevention to fix one incorrectly categorized web site.

Explanation

Correct Answer

B:

It conflicts with the relevant behavior: An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication.

Incorrect Answers

A:

That proposal is unsafe in its own context (the separate topic of Network-level privileges and separation of duties), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX VLAN interfaces and DHCP configuration: Place the same IPv4 gateway address on two unrelated VLAN interfaces and expect unambiguous routing.

C:

That proposal is unsafe in its own context (the separate topic of Systems Manager application deployment and tag scope), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX VLAN interfaces and DHCP configuration: Place the same IPv4 gateway address on two unrelated VLAN interfaces and expect unambiguous routing.

D:

That proposal is unsafe in its own context (the separate topic of MX layer three and layer seven security filtering), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX VLAN interfaces and DHCP configuration: Place the same IPv4 gateway address on two unrelated VLAN interfaces and expect unambiguous routing.

Question 416

A Cisco Meraki deployment engineer investigates this operational case: A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.
  2. Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.
  3. Verify the administrator's organization role, MFA status and intended scope before granting access to a new network.
  4. Audit claimed hardware and license entitlement when an RMA device is swapped instead of creating a duplicate charge by assumption.

Explanation

Correct Answer

A:

The targeted next step is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet. The technical reason is: Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX static routes to downstream layer three network requirement.

C:

That action is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific MX static routes to downstream layer three network requirement.

D:

That action is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific MX static routes to downstream layer three network requirement.

Question 417

A peer reviewer evaluates the following Meraki case. A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable. The proposed action is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Deployment success requires both the intended Dashboard configuration and observed endpoint traffic, not just a green device tile.
  2. Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing.
  3. An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication.
  4. MR WLAN access controls and MX firewall/IPS operate at different enforcement points; a rule in one place is not automatically present in the other.

Explanation

Correct Answer

B:

Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing. In this situation (A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable.), it justifies the action: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific MX static routes to downstream layer three network requirement.

C:

That principle is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX static routes to downstream layer three network requirement.

D:

That principle is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific MX static routes to downstream layer three network requirement.

Question 418

A Meraki support engineer must distinguish facts from assumptions. A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
  2. Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
  3. Create an allow-any MX firewall rule as the only remedy for an absent static route to a warehouse VLAN.
  4. Correlate client IP, destination, service, matched MX rule and relevant threat or content event in Dashboard.

Explanation

Correct Answer

B:

The discriminating evidence is: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint. Expected result: The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific MX static routes to downstream layer three network requirement.

C:

The controlled response is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.

D:

That evidence is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific MX static routes to downstream layer three network requirement.

Question 419

An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable. The proposed validation is: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Authenticated endpoints receive the correct VLAN and only required upstream access.
  2. The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic.
  3. The correct devices and product-specific settings are visible without moving unrelated organizational assets.
  4. Authorized clients obtain nonoverlapping addresses and reach their designated gateway and permitted resources.

Explanation

Correct Answer

B:

The acceptance criterion is: The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic. Verify it using: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific MX static routes to downstream layer three network requirement.

C:

That outcome is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific MX static routes to downstream layer three network requirement.

D:

That outcome is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MX static routes to downstream layer three network requirement. For this scenario, the proper response is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.

Question 420

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch MX directly connects 10.1.0.0/24, while 10.3.0.0/24 sits behind an MS L3 switch and is unreachable. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.
  2. Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
  3. Compare old and replacement serial numbers, inventory state, Dashboard license status and authorized vendor RMA documentation.
  4. Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
  5. Compare Dashboard online status, management DNS reachability and a same-VLAN client test during the same interval.

Explanation

Correct Answers

A:

The targeted next step is: Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet. The technical reason is: Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing. A successful verification would use: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.

D:

The discriminating evidence is: Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific MX static routes to downstream layer three network requirement.

C:

That evidence is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific MX static routes to downstream layer three network requirement.

E:

That evidence is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific MX static routes to downstream layer three network requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests