cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 36

Question 350

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
  2. Compare primary and secondary uplink graphs, observed ping loss and application errors across aligned timestamps.
  3. Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior.
  4. Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
  5. Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.

Explanation

Correct Answers

D:

The targeted next step is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points. The technical reason is: High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength. A successful verification would use: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.

E:

The discriminating evidence is: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific High-density RF channel and AP count planning requirement.

B:

That evidence is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific High-density RF channel and AP count planning requirement.

C:

That action is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific High-density RF channel and AP count planning requirement.

Question 351

A Cisco Meraki deployment engineer investigates this operational case: A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.
  2. Use the local device status page for uplink and basic device diagnostics when the remote Dashboard is inaccessible, subject to model capabilities.
  3. Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
  4. Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.

Explanation

Correct Answer

C:

The targeted next step is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific High-density RF channel and AP count planning requirement.

B:

That action is relevant to the distinct Meraki subject of Local status page versus cloud Dashboard troubleshooting, not the specific High-density RF channel and AP count planning requirement.

D:

That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific High-density RF channel and AP count planning requirement. For this scenario, the proper response is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points. Verify it through: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.

Question 352

A peer reviewer evaluates the following Meraki case. A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily. The proposed action is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points. Which technical principle BEST supports this decision? Select ONE best answer.

  1. A virtual MX provides supported Meraki cloud VPN connectivity but does not replace the cloud provider's subnets, route tables and security controls.
  2. Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
  3. Guest portal acceptance and guest VLAN isolation are separate controls; both need validation for a working secure guest network.
  4. High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength.

Explanation

Correct Answer

D:

High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength. In this situation (A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily.), it justifies the action: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of vMX private cloud connectivity and deployment mode, not the specific High-density RF channel and AP count planning requirement.

B:

That principle is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific High-density RF channel and AP count planning requirement.

C:

That principle is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific High-density RF channel and AP count planning requirement.

Question 353

A Meraki support engineer must distinguish facts from assumptions. A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Inspect HTTP response code, API organization scope and a minimal authorized read operation without exposing credentials.
  2. Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
  3. Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
  4. Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.

Explanation

Correct Answer

C:

The discriminating evidence is: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy. Applied to the described situation (A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily.), it should establish: The client population maintains acceptable airtime and roaming behavior under a representative load.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Meraki Dashboard API authentication and scoped permissions, not the specific High-density RF channel and AP count planning requirement.

B:

That evidence is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific High-density RF channel and AP count planning requirement.

D:

That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific High-density RF channel and AP count planning requirement.

Question 354

An implementation lead needs a measurable acceptance criterion for a Meraki change. A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily. The proposed validation is: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Employees join the correct protected network while unauthorized endpoints are denied or placed safely.
  2. Two authorized VLANs communicate through the intended L3 boundary while others stay isolated.
  3. The critical application selects the appropriate healthy uplink without indiscriminately throttling all users.
  4. The client population maintains acceptable airtime and roaming behavior under a representative load.

Explanation

Correct Answer

D:

The acceptance criterion is: The client population maintains acceptable airtime and roaming behavior under a representative load. Verify it using: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy. The associated corrective action is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific High-density RF channel and AP count planning requirement.

B:

That outcome is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific High-density RF channel and AP count planning requirement.

C:

That outcome is relevant to the distinct Meraki subject of MX SD-WAN traffic preferences and shaping, not the specific High-density RF channel and AP count planning requirement.

Question 355

A Meraki operations reviewer examines this case. A stadium adds many nearby APs and sees lower throughput because their channels interfere heavily. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Assume BGP automatically advertises all private networks from any device plugged into the VPN hub.
  2. Place dozens of APs on a single 2.4 GHz channel to guarantee linear throughput growth.
  3. Force every older 2.4 GHz-only scanner to join a 6 GHz-only SSID by changing its profile name.
  4. Claim NetFlow provides the complete encrypted content of every HTTPS transaction.

Explanation

Correct Answer

B:

It conflicts with the relevant behavior: High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength.

Incorrect Answers

A:

That proposal is unsafe in its own context (the separate topic of BGP route exchange at VPN hub and datacenter), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns High-density RF channel and AP count planning: Place dozens of APs on a single 2.4 GHz channel to guarantee linear throughput growth.

C:

That proposal is unsafe in its own context (the separate topic of MR RF profile and band planning across device generations), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns High-density RF channel and AP count planning: Place dozens of APs on a single 2.4 GHz channel to guarantee linear throughput growth.

D:

That proposal is unsafe in its own context (the separate topic of NetFlow export and traffic visibility limits), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns High-density RF channel and AP count planning: Place dozens of APs on a single 2.4 GHz channel to guarantee linear throughput growth.

Question 356

A Cisco Meraki deployment engineer investigates this operational case: A bank wants employee Wi-Fi assigned to a controlled VLAN using enterprise RADIUS while visitors use Internet-only access. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
  2. Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
  3. Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
  4. Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.

Explanation

Correct Answer

D:

The targeted next step is: Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access. The technical reason is: Enterprise access requires compatible security and backend identity controls; simply hiding an SSID is not authentication.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific Enterprise SSID design for authentication and segmentation requirement.

B:

That action is relevant to the distinct Meraki subject of MV camera retention and storage planning, not the specific Enterprise SSID design for authentication and segmentation requirement.

C:

That action is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Enterprise SSID design for authentication and segmentation requirement.

Question 357

A peer reviewer evaluates the following Meraki case. A bank wants employee Wi-Fi assigned to a controlled VLAN using enterprise RADIUS while visitors use Internet-only access. The proposed action is: Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable.
  2. Enterprise access requires compatible security and backend identity controls; simply hiding an SSID is not authentication.
  3. Bulk Meraki configuration workflows can reduce request load but need individual operation outcomes and appropriate safety gates.
  4. A healthy tunnel alone cannot guarantee that the destination subnet is advertised or permitted by firewall policy.

Explanation

Correct Answer

B:

Enterprise access requires compatible security and backend identity controls; simply hiding an SSID is not authentication. In this situation (A bank wants employee Wi-Fi assigned to a controlled VLAN using enterprise RADIUS while visitors use Internet-only access.), it justifies the action: Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Enterprise SSID design for authentication and segmentation requirement.

C:

That principle is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Enterprise SSID design for authentication and segmentation requirement.

D:

That principle is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific Enterprise SSID design for authentication and segmentation requirement.

Question 358

A Meraki support engineer must distinguish facts from assumptions. A bank wants employee Wi-Fi assigned to a controlled VLAN using enterprise RADIUS while visitors use Internet-only access. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
  2. Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.
  3. Review supported platform mode, routing configuration, neighbor status and learned prefixes in the designated topology.
  4. Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.

Explanation

Correct Answer

B:

The discriminating evidence is: Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy. Expected result: Employees join the correct protected network while unauthorized endpoints are denied or placed safely.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific Enterprise SSID design for authentication and segmentation requirement. For this scenario, the proper response is: Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.

C:

That evidence is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Enterprise SSID design for authentication and segmentation requirement.

D:

That evidence is relevant to the distinct Meraki subject of Static route next hop and VPN route preference, not the specific Enterprise SSID design for authentication and segmentation requirement.

Question 359

An implementation lead needs a measurable acceptance criterion for a Meraki change. A bank wants employee Wi-Fi assigned to a controlled VLAN using enterprise RADIUS while visitors use Internet-only access. The proposed validation is: Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The client population maintains acceptable airtime and roaming behavior under a representative load.
  2. Employees join the correct protected network while unauthorized endpoints are denied or placed safely.
  3. Read-only responders access required diagnostics without the ability to alter production firewall or SSID policy.
  4. Critical sites recover expected WAN and VPN services within the approved maintenance plan.

Explanation

Correct Answer

B:

The acceptance criterion is: Employees join the correct protected network while unauthorized endpoints are denied or placed safely. Verify it using: Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Enterprise SSID design for authentication and segmentation requirement. For this scenario, the proper response is: Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.

C:

That outcome is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Enterprise SSID design for authentication and segmentation requirement.

D:

That outcome is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Enterprise SSID design for authentication and segmentation requirement.

Question 360

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A bank wants employee Wi-Fi assigned to a controlled VLAN using enterprise RADIUS while visitors use Internet-only access. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
  2. Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.
  3. Review RADIUS logs, EAP rejection codes, client certificate and the assigned VLAN of a known-good peer.
  4. Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.
  5. Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.

Explanation

Correct Answers

B:

The discriminating evidence is: Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.

D:

The targeted next step is: Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access. The technical reason is: Enterprise access requires compatible security and backend identity controls; simply hiding an SSID is not authentication. A successful verification would use: Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Enterprise SSID design for authentication and segmentation requirement.

C:

That evidence is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Enterprise SSID design for authentication and segmentation requirement.

E:

That action is relevant to the distinct Meraki subject of End-to-end QoS trust and voice policy, not the specific Enterprise SSID design for authentication and segmentation requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests