Cisco 500-220 Practice Test 35
Question 340
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A college wants corporate laptops authenticated by certificate while guests use a separate network. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare old and replacement serial numbers, inventory state, Dashboard license status and authorized vendor RMA documentation.
- Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
- Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
- Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
- Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy.
Explanation
Correct Answers
D:The discriminating evidence is: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
E:The targeted next step is: Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy. The technical reason is: 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization. A successful verification would use: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific RADIUS and 802.1X network access design requirement.
B:That evidence is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific RADIUS and 802.1X network access design requirement.
C:That action is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific RADIUS and 802.1X network access design requirement.
Question 341
A Cisco Meraki deployment engineer investigates this operational case: A warehouse switch enforces 802.1X, but all phones fail access after an unreachable RADIUS endpoint was configured. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
- Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy.
- Configure supported MS port access policies with a reachable RADIUS service and documented noncompliant-device handling.
Explanation
Correct Answer
C:The targeted next step is: Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of End-to-end QoS trust and voice policy, not the specific RADIUS and 802.1X network access design requirement. For this scenario, the proper response is: Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy. Verify it through: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
B:That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific RADIUS and 802.1X network access design requirement.
D:Verify it through: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
Question 342
A peer reviewer evaluates the following Meraki case. A warehouse switch enforces 802.1X, but all phones fail access after an unreachable RADIUS endpoint was configured. The proposed action is: Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy. Which technical principle BEST supports this decision? Select ONE best answer.
- Layer-2 controls protect local switching domains but must distinguish trusted infrastructure ports from client access edges.
- 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
- BGP route propagation requires a supported device and configuration and explicit policies; a working VPN tunnel alone does not prove BGP exchange.
- Wi-Fi quality depends on RF and client roaming conditions; successful SSID discovery does not establish usable application traffic.
Explanation
Correct Answer
B:802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization. In this situation (A warehouse switch enforces 802.1X, but all phones fail access after an unreachable RADIUS endpoint was configured.), it justifies the action: Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific RADIUS and 802.1X network access design requirement.
C:That principle is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific RADIUS and 802.1X network access design requirement.
D:That principle is relevant to the distinct Meraki subject of MR wireless RF interference and roaming diagnosis, not the specific RADIUS and 802.1X network access design requirement.
Question 343
A Meraki support engineer must distinguish facts from assumptions. A warehouse switch enforces 802.1X, but all phones fail access after an unreachable RADIUS endpoint was configured. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
- Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
- Test a specific client flow against MR SSID policy, VLAN assignment and the MX security rule that applies.
- Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.
Explanation
Correct Answer
B:The discriminating evidence is: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result. Expected result: Known users or devices receive the intended network assignment while unknown devices remain isolated.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific RADIUS and 802.1X network access design requirement.
C:That evidence is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific RADIUS and 802.1X network access design requirement.
D:That evidence is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific RADIUS and 802.1X network access design requirement.
Question 344
An implementation lead needs a measurable acceptance criterion for a Meraki change. A warehouse switch enforces 802.1X, but all phones fail access after an unreachable RADIUS endpoint was configured. The proposed validation is: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The correct devices and product-specific settings are visible without moving unrelated organizational assets.
- Known users or devices receive the intended network assignment while unknown devices remain isolated.
- Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence.
- The engineer can perform the approved network change without obtaining unnecessary organization-wide rights.
Explanation
Correct Answer
B:The acceptance criterion is: Known users or devices receive the intended network assignment while unknown devices remain isolated. Verify it using: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific RADIUS and 802.1X network access design requirement.
C:That outcome is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific RADIUS and 802.1X network access design requirement. For this scenario, the proper response is: Design identity-based port or Wi-Fi access with reachable RADIUS servers, certificate handling and a fallback policy. Verify it through: Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
D:That outcome is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific RADIUS and 802.1X network access design requirement.
Question 345
A Meraki operations reviewer examines this case. A warehouse switch enforces 802.1X, but all phones fail access after an unreachable RADIUS endpoint was configured. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Declare a port secure simply because the Meraki switch has a valid IP address for Dashboard management.
- Allow every device into the privileged VLAN whenever one RADIUS server has an outage.
- Force every older 2.4 GHz-only scanner to join a 6 GHz-only SSID by changing its profile name.
- Claim NetFlow provides the complete encrypted content of every HTTPS transaction.
Explanation
Correct Answer
B:It conflicts with the relevant behavior: 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Layer two protections and unauthorized DHCP sources), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns RADIUS and 802.1X network access design: Allow every device into the privileged VLAN whenever one RADIUS server has an outage.
C:That proposal is unsafe in its own context (the separate topic of MR RF profile and band planning across device generations), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns RADIUS and 802.1X network access design: Allow every device into the privileged VLAN whenever one RADIUS server has an outage.
D:That proposal is unsafe in its own context (the separate topic of NetFlow export and traffic visibility limits), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns RADIUS and 802.1X network access design: Allow every device into the privileged VLAN whenever one RADIUS server has an outage.
Question 346
A Cisco Meraki deployment engineer investigates this operational case: An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
- Add a specific supported static route through a reachable LAN-side router after verifying the downstream subnet.
- Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
- Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
Explanation
Correct Answer
C:The targeted next step is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points. The technical reason is: High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific High-density RF channel and AP count planning requirement. For this scenario, the proper response is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
B:That action is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific High-density RF channel and AP count planning requirement.
D:That action is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific High-density RF channel and AP count planning requirement.
Question 347
A peer reviewer evaluates the following Meraki case. An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room. The proposed action is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points. Which technical principle BEST supports this decision? Select ONE best answer.
- Firmware changes can affect device behavior and wireless client interoperability; a staged test limits correlated outage exposure.
- High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength.
- Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.
- Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable.
Explanation
Correct Answer
B:High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength. In this situation (An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room.), it justifies the action: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific High-density RF channel and AP count planning requirement.
C:That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific High-density RF channel and AP count planning requirement.
D:That principle is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific High-density RF channel and AP count planning requirement.
Question 348
A Meraki support engineer must distinguish facts from assumptions. An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Check peer state, accepted and advertised prefixes and next-hop reachability at the intended datacenter edge.
- Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
- Audit network role assignments and test event viewing separately from actual change permissions.
- Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.
Explanation
Correct Answer
B:The discriminating evidence is: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy. Applied to the described situation (An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room.), it should establish: The client population maintains acceptable airtime and roaming behavior under a representative load.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific High-density RF channel and AP count planning requirement.
C:That evidence is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific High-density RF channel and AP count planning requirement.
D:That evidence is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific High-density RF channel and AP count planning requirement.
Question 349
An implementation lead needs a measurable acceptance criterion for a Meraki change. An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room. The proposed validation is: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Guest endpoints stay isolated while authorized staff reach only specified internal resources.
- The analyst can state which client stage failed and when, with documented supporting observations.
- Both older and newer clients connect through documented supported bands without unnecessary interference.
- The client population maintains acceptable airtime and roaming behavior under a representative load.
Explanation
Correct Answer
D:The acceptance criterion is: The client population maintains acceptable airtime and roaming behavior under a representative load. Verify it using: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific High-density RF channel and AP count planning requirement.
B:That outcome is relevant to the distinct Meraki subject of Dashboard client timeline and event filtering, not the specific High-density RF channel and AP count planning requirement.
C:That outcome is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific High-density RF channel and AP count planning requirement.
Question 350
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An auditorium seats 700 students who all stream at once and a designer wants one AP because its signal covers the room. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
- Compare primary and secondary uplink graphs, observed ping loss and application errors across aligned timestamps.
- Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior.
- Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
- Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
Explanation
Correct Answers
D:The targeted next step is: Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points. The technical reason is: High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength. A successful verification would use: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
E:The discriminating evidence is: Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific High-density RF channel and AP count planning requirement.
B:That evidence is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific High-density RF channel and AP count planning requirement.
C:That action is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific High-density RF channel and AP count planning requirement.