Cisco 500-220 Practice Test 38
Question 370
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A café guest sees the splash page but the DNS path is blocked before the user can accept terms. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Check organization inventory, device serial assignment and the target network's product types before moving hardware.
- Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
- Compare client event history, AP channel/utilization, RSSI trends and authentication records during the failure.
- Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
- Verify both forward and return paths between Auto VPN sites and cloud workloads rather than checking only IKE state.
Explanation
Correct Answers
B:The targeted next step is: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services. The technical reason is: Guest portal acceptance and guest VLAN isolation are separate controls; both need validation for a working secure guest network. A successful verification would use: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
D:The discriminating evidence is: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
C:That evidence is relevant to the distinct Meraki subject of MR wireless RF interference and roaming diagnosis, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
E:That action is relevant to the distinct Meraki subject of vMX traffic symmetry and cloud return routing, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
Question 371
A Cisco Meraki deployment engineer investigates this operational case: A corporate office offers guest web access yet the WLAN accidentally permits lateral access to private printers. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
- Read the current setting and keep a before/after audit when applying API configuration changes across many networks.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
- Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
Explanation
Correct Answer
A:The targeted next step is: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
C:That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Guest Wi-Fi captive portal and traffic isolation requirement. For this scenario, the proper response is: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services. Verify it through: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
D:That action is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
Question 372
A peer reviewer evaluates the following Meraki case. A corporate office offers guest web access yet the WLAN accidentally permits lateral access to private printers. The proposed action is: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services. Which technical principle BEST supports this decision? Select ONE best answer.
- Deployment success requires both the intended Dashboard configuration and observed endpoint traffic, not just a green device tile.
- Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable.
- Guest portal acceptance and guest VLAN isolation are separate controls; both need validation for a working secure guest network.
- Bulk Meraki configuration workflows can reduce request load but need individual operation outcomes and appropriate safety gates.
Explanation
Correct Answer
C:Guest portal acceptance and guest VLAN isolation are separate controls; both need validation for a working secure guest network. In this situation (A corporate office offers guest web access yet the WLAN accidentally permits lateral access to private printers.), it justifies the action: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
B:That principle is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Guest Wi-Fi captive portal and traffic isolation requirement. For this scenario, the proper response is: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services. Verify it through: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
D:That principle is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
Question 373
A Meraki support engineer must distinguish facts from assumptions. A corporate office offers guest web access yet the WLAN accidentally permits lateral access to private printers. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare assignment rules, managed app status, device OS support and a controlled installation attempt.
- Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test.
- Compare primary and secondary uplink graphs, observed ping loss and application errors across aligned timestamps.
- Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
Explanation
Correct Answer
D:The discriminating evidence is: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access. Expected result: A visitor completes authorized onboarding and browses externally while protected business networks remain unreachable.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Managed app rollout and assignment scoping, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
B:That evidence is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
C:That evidence is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
Question 374
An implementation lead needs a measurable acceptance criterion for a Meraki change. A corporate office offers guest web access yet the WLAN accidentally permits lateral access to private printers. The proposed validation is: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The automation reads its permitted network data and denied operations remain blocked to unauthorized identities.
- The client population maintains acceptable airtime and roaming behavior under a representative load.
- A visitor completes authorized onboarding and browses externally while protected business networks remain unreachable.
- Two authorized VLANs communicate through the intended L3 boundary while others stay isolated.
Explanation
Correct Answer
C:The acceptance criterion is: A visitor completes authorized onboarding and browses externally while protected business networks remain unreachable. Verify it using: Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Meraki Dashboard API authentication and scoped permissions, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
B:That outcome is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
D:That outcome is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific Guest Wi-Fi captive portal and traffic isolation requirement.
Question 375
A Meraki operations reviewer examines this case. A corporate office offers guest web access yet the WLAN accidentally permits lateral access to private printers. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Disable spanning tree everywhere because a newly connected cable caused a broadcast storm.
- Change the corporate SSID to open authentication whenever one certificate expires.
- Use a single open guest SSID bridging directly into the payroll VLAN because a portal displays a splash page.
- Force every older 2.4 GHz-only scanner to join a 6 GHz-only SSID by changing its profile name.
Explanation
Correct Answer
C:Use instead: Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Layer two loop and spanning tree diagnosis), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Guest Wi-Fi captive portal and traffic isolation: Use a single open guest SSID bridging directly into the payroll VLAN because a portal displays a splash page.
B:That proposal is unsafe in its own context (the separate topic of MR corporate SSID with WPA enterprise authentication), but it is not the shortcut tied most directly to this incident.
D:That proposal is unsafe in its own context (the separate topic of MR RF profile and band planning across device generations), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Guest Wi-Fi captive portal and traffic isolation: Use a single open guest SSID bridging directly into the payroll VLAN because a portal displays a splash page.
Question 376
A Cisco Meraki deployment engineer investigates this operational case: A distribution center has older barcode scanners and newer laptops with different band support in one physical area. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Trace the forward and reverse route for a single failing client flow before replacing an MX or MS appliance.
- Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
- Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
Explanation
Correct Answer
D:The targeted next step is: Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities. The technical reason is: Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific MR RF profile and band planning across device generations requirement.
B:That action is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MR RF profile and band planning across device generations requirement.
C:That action is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific MR RF profile and band planning across device generations requirement.
Question 377
A peer reviewer evaluates the following Meraki case. A distribution center has older barcode scanners and newer laptops with different band support in one physical area. The proposed action is: Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities. Which technical principle BEST supports this decision? Select ONE best answer.
- Managed enrollment status enables device-policy functions only where the platform and ownership mode support them.
- Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable.
- High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength.
- RF profiles define radio behavior such as band and channel strategies; oversizing channels or transmit power can worsen contention.
Explanation
Correct Answer
B:Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable. In this situation (A distribution center has older barcode scanners and newer laptops with different band support in one physical area.), it justifies the action: Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Systems Manager MDM enrollment and compliance profiles, not the specific MR RF profile and band planning across device generations requirement.
C:That principle is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MR RF profile and band planning across device generations requirement.
D:That principle is relevant to the distinct Meraki subject of MR RF profiles and channel width optimization, not the specific MR RF profile and band planning across device generations requirement.
Question 378
A Meraki support engineer must distinguish facts from assumptions. A distribution center has older barcode scanners and newer laptops with different band support in one physical area. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Test a specific client flow against MR SSID policy, VLAN assignment and the MX security rule that applies.
- Review camera online status, playback retention, motion-event rule and destination notification settings.
- Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
- Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test.
Explanation
Correct Answer
D:The discriminating evidence is: Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test. Expected result: Both older and newer clients connect through documented supported bands without unnecessary interference.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific MR RF profile and band planning across device generations requirement.
B:That evidence is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MR RF profile and band planning across device generations requirement.
C:That evidence is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific MR RF profile and band planning across device generations requirement.
Question 379
An implementation lead needs a measurable acceptance criterion for a Meraki change. A distribution center has older barcode scanners and newer laptops with different band support in one physical area. The proposed validation is: Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Both older and newer clients connect through documented supported bands without unnecessary interference.
- The client population maintains acceptable airtime and roaming behavior under a representative load.
- The reconciled inventory covers every intended device once without truncating large networks.
- Read-only responders access required diagnostics without the ability to alter production firewall or SSID policy.
Explanation
Correct Answer
A:The acceptance criterion is: Both older and newer clients connect through documented supported bands without unnecessary interference. Verify it using: Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test. The associated corrective action is: Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MR RF profile and band planning across device generations requirement.
C:That outcome is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific MR RF profile and band planning across device generations requirement.
D:That outcome is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific MR RF profile and band planning across device generations requirement.
Question 380
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A distribution center has older barcode scanners and newer laptops with different band support in one physical area. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Confirm that each site advertises the intended nonoverlapping VPN-enabled local networks before diagnosing a missing branch route.
- Choose an appropriate supported route exchange and validate OSPF neighbor topology rather than inventing static routes for every subnet.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
- Test a new guest client's portal, name resolution and forbidden internal-subnet connectivity.
- Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test.
Explanation
Correct Answers
C:The targeted next step is: Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities. The technical reason is: Bands and channel widths affect cell size, contention and device compatibility; wider channels are not universally more reliable. A successful verification would use: Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test.
E:The discriminating evidence is: Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific MR RF profile and band planning across device generations requirement.
B:That action is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific MR RF profile and band planning across device generations requirement.
D:That evidence is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific MR RF profile and band planning across device generations requirement.