Cisco 500-220 Practice Test 25
Question 240
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A leased-line path drops one in ten packets while the MX Ethernet interface stays up and voice suffers. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
- Review event action, source/destination, signature or category and corroborating endpoint logs.
- Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier.
- Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.
- Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
Explanation
Correct Answers
C:The targeted next step is: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier. The technical reason is: An uplink may remain physically up while excessive loss or latency makes it unsuitable for a critical flow. A successful verification would use: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
E:The discriminating evidence is: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment. Expected result: The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Brownout versus hard WAN link-down detection requirement.
B:That evidence is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Brownout versus hard WAN link-down detection requirement.
D:That evidence is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific Brownout versus hard WAN link-down detection requirement.
Question 241
A Cisco Meraki deployment engineer investigates this operational case: A branch tests physical unplug failover successfully but ignores severe jitter during peak ISP congestion. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier.
- Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
- Plan managed switch access-port protections against rogue DHCP, spoofing and accidental loops according to platform support.
- Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
Explanation
Correct Answer
A:The targeted next step is: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific Brownout versus hard WAN link-down detection requirement.
C:That action is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Brownout versus hard WAN link-down detection requirement.
D:That action is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Brownout versus hard WAN link-down detection requirement.
Question 242
A peer reviewer evaluates the following Meraki case. A branch tests physical unplug failover successfully but ignores severe jitter during peak ISP congestion. The proposed action is: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier. Which technical principle BEST supports this decision? Select ONE best answer.
- An uplink may remain physically up while excessive loss or latency makes it unsuitable for a critical flow.
- 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
- Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink.
- Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
Explanation
Correct Answer
A:An uplink may remain physically up while excessive loss or latency makes it unsuitable for a critical flow. In this situation (A branch tests physical unplug failover successfully but ignores severe jitter during peak ISP congestion.), it justifies the action: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Brownout versus hard WAN link-down detection requirement.
C:That principle is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Brownout versus hard WAN link-down detection requirement. For this scenario, the proper response is: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier. Verify it through: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
D:That principle is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Brownout versus hard WAN link-down detection requirement.
Question 243
A Meraki support engineer must distinguish facts from assumptions. A branch tests physical unplug failover successfully but ignores severe jitter during peak ISP congestion. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Review supported platform mode, routing configuration, neighbor status and learned prefixes in the designated topology.
- Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
- Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.
- Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
Explanation
Correct Answer
B:The discriminating evidence is: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment. Expected result: The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Brownout versus hard WAN link-down detection requirement.
C:That evidence is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Brownout versus hard WAN link-down detection requirement.
D:That evidence is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Brownout versus hard WAN link-down detection requirement.
Question 244
An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch tests physical unplug failover successfully but ignores severe jitter during peak ISP congestion. The proposed validation is: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage.
- Critical sites recover expected WAN and VPN services within the approved maintenance plan.
- Voice chooses a path that meets conversational quality while bulk synchronization can follow an appropriate alternate.
- The affected client VLAN is carried end-to-end and receives the intended address and network access.
Explanation
Correct Answer
A:The acceptance criterion is: The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage. Verify it using: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment. The associated corrective action is: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Brownout versus hard WAN link-down detection requirement.
C:That outcome is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Brownout versus hard WAN link-down detection requirement. For this scenario, the proper response is: Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier. Verify it through: Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
D:That outcome is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific Brownout versus hard WAN link-down detection requirement.
Question 245
A Meraki operations reviewer examines this case. A branch tests physical unplug failover successfully but ignores severe jitter during peak ISP congestion. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Reuse identical 192.168.1.0/24 LAN prefixes at two branches and assume peer reachability will sort itself out.
- Treat a green WAN interface indicator as proof the path meets every application's quality requirement.
- Assume a global WAN preference overrides all individual application flow policies under every condition.
- Assume enabling guest isolation on one SSID automatically creates an MX deny rule for every wired VLAN.
Explanation
Correct Answer
B:It conflicts with the relevant behavior: An uplink may remain physically up while excessive loss or latency makes it unsuitable for a critical flow.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Auto VPN subnet advertisement and overlap), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Brownout versus hard WAN link-down detection: Treat a green WAN interface indicator as proof the path meets every application's quality requirement.
C:That proposal is unsafe in its own context (the separate topic of Flow preferences and VPN path selection policy), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Brownout versus hard WAN link-down detection: Treat a green WAN interface indicator as proof the path meets every application's quality requirement.
D:That proposal is unsafe in its own context (the separate topic of Security policy design across MX firewall and MR WLAN), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Brownout versus hard WAN link-down detection: Treat a green WAN interface indicator as proof the path meets every application's quality requirement.
Question 246
A Cisco Meraki deployment engineer investigates this operational case: A branch wants voice calls to remain usable when nightly backups fill the primary ISP uplink. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
- Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
- Configure appropriate MS port QoS trust and handling for known voice endpoints while measuring contention.
- Validate the device's management network DNS, gateway and permitted outbound cloud connectivity before changing user firewall rules.
Explanation
Correct Answer
B:The targeted next step is: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion. The technical reason is: Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific Dual uplink bandwidth and application shaping design requirement. For this scenario, the proper response is: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
C:That action is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific Dual uplink bandwidth and application shaping design requirement.
D:That action is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Dual uplink bandwidth and application shaping design requirement.
Question 247
A peer reviewer evaluates the following Meraki case. A branch wants voice calls to remain usable when nightly backups fill the primary ISP uplink. The proposed action is: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion. Which technical principle BEST supports this decision? Select ONE best answer.
- The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port.
- Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink.
- Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.
- Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
Explanation
Correct Answer
B:Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink. In this situation (A branch wants voice calls to remain usable when nightly backups fill the primary ISP uplink.), it justifies the action: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific Dual uplink bandwidth and application shaping design requirement.
C:That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Dual uplink bandwidth and application shaping design requirement.
D:That principle is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Dual uplink bandwidth and application shaping design requirement.
Question 248
A Meraki support engineer must distinguish facts from assumptions. A branch wants voice calls to remain usable when nightly backups fill the primary ISP uplink. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect HTTP response code, API organization scope and a minimal authorized read operation without exposing credentials.
- Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
- Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
- Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
Explanation
Correct Answer
D:The discriminating evidence is: Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test. Expected result: Priority applications maintain their acceptable response while lower-priority traffic respects agreed limits.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Meraki Dashboard API authentication and scoped permissions, not the specific Dual uplink bandwidth and application shaping design requirement.
B:That evidence is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific Dual uplink bandwidth and application shaping design requirement.
C:That evidence is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific Dual uplink bandwidth and application shaping design requirement.
Question 249
An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch wants voice calls to remain usable when nightly backups fill the primary ISP uplink. The proposed validation is: Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Legitimate clients receive approved addresses while untrusted DHCP offers are constrained.
- Both older and newer clients connect through documented supported bands without unnecessary interference.
- Priority applications maintain their acceptable response while lower-priority traffic respects agreed limits.
- The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage.
Explanation
Correct Answer
C:The acceptance criterion is: Priority applications maintain their acceptable response while lower-priority traffic respects agreed limits. Verify it using: Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test. The associated corrective action is: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Dual uplink bandwidth and application shaping design requirement.
B:That outcome is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Dual uplink bandwidth and application shaping design requirement.
D:That outcome is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific Dual uplink bandwidth and application shaping design requirement. For this scenario, the proper response is: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
Question 250
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch wants voice calls to remain usable when nightly backups fill the primary ISP uplink. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare edge access policy, RADIUS response, assigned VLAN and MX permitted subnet flow.
- Check SVI addressing, routing state, next hops and representative inter-VLAN traffic.
- Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.
- Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
- Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
Explanation
Correct Answers
D:The targeted next step is: Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion. The technical reason is: Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink. A successful verification would use: Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
E:The discriminating evidence is: Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific Dual uplink bandwidth and application shaping design requirement.
B:That evidence is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific Dual uplink bandwidth and application shaping design requirement.
C:That evidence is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific Dual uplink bandwidth and application shaping design requirement.