Cisco 500-220 Practice Test 23
Question 220
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch has a faster satellite link with high latency and a slower terrestrial link with stable jitter for meetings. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Design the vMX as the intended cloud VPN concentrator and include the cloud provider's required route and security constructs.
- Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
- Review event action, source/destination, signature or category and corroborating endpoint logs.
- Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
- Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
Explanation
Correct Answers
D:The targeted next step is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences. The technical reason is: Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally. A successful verification would use: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
E:The discriminating evidence is: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of vMX private cloud connectivity and deployment mode, not the specific Performance-class loss latency and jitter thresholds requirement.
B:That evidence is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Performance-class loss latency and jitter thresholds requirement.
C:That evidence is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Performance-class loss latency and jitter thresholds requirement. For this scenario, the proper response is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
Question 221
A Cisco Meraki deployment engineer investigates this operational case: A call center sees speech clipping during packet-loss spikes despite otherwise low average WAN bandwidth use. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Bind only compatible branch networks to the approved configuration template and plan site-specific overrides intentionally.
- Design failover that considers degraded uplink quality, not solely loss of an Ethernet carrier.
- Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
- Evaluate supported BGP topology and path filters when a concentrator must exchange VPN routes with upstream routing.
Explanation
Correct Answer
C:The targeted next step is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific Performance-class loss latency and jitter thresholds requirement.
B:That action is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific Performance-class loss latency and jitter thresholds requirement. For this scenario, the proper response is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences. Verify it through: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
D:That action is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Performance-class loss latency and jitter thresholds requirement.
Question 222
A peer reviewer evaluates the following Meraki case. A call center sees speech clipping during packet-loss spikes despite otherwise low average WAN bandwidth use. The proposed action is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences. Which technical principle BEST supports this decision? Select ONE best answer.
- Loss of cloud management and loss of local forwarding are different faults; local data can narrow the affected plane.
- Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
- Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink.
- RF profiles define radio behavior such as band and channel strategies; oversizing channels or transmit power can worsen contention.
Explanation
Correct Answer
B:Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally. In this situation (A call center sees speech clipping during packet-loss spikes despite otherwise low average WAN bandwidth use.), it justifies the action: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific Performance-class loss latency and jitter thresholds requirement.
C:That principle is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Performance-class loss latency and jitter thresholds requirement.
D:That principle is relevant to the distinct Meraki subject of MR RF profiles and channel width optimization, not the specific Performance-class loss latency and jitter thresholds requirement.
Question 223
A Meraki support engineer must distinguish facts from assumptions. A call center sees speech clipping during packet-loss spikes despite otherwise low average WAN bandwidth use. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Review event action, source/destination, signature or category and corroborating endpoint logs.
- Correlate interface health, performance-class violations and observed traffic transition during controlled impairment.
- Review supported platform mode, routing configuration, neighbor status and learned prefixes in the designated topology.
- Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
Explanation
Correct Answer
D:The discriminating evidence is: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA. Expected result: Voice chooses a path that meets conversational quality while bulk synchronization can follow an appropriate alternate.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Performance-class loss latency and jitter thresholds requirement. For this scenario, the proper response is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences. Verify it through: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
B:That evidence is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific Performance-class loss latency and jitter thresholds requirement.
C:That evidence is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Performance-class loss latency and jitter thresholds requirement.
Question 224
An implementation lead needs a measurable acceptance criterion for a Meraki change. A call center sees speech clipping during packet-loss spikes despite otherwise low average WAN bandwidth use. The proposed validation is: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The critical service changes to an acceptable path when its measured SLA is violated rather than waiting for full outage.
- The requested changes reach exactly intended networks and can be reversed using recorded configuration.
- Voice chooses a path that meets conversational quality while bulk synchronization can follow an appropriate alternate.
- Both directions of the authorized branch-to-cloud flow traverse the selected cloud VPN path.
Explanation
Correct Answer
C:The acceptance criterion is: Voice chooses a path that meets conversational quality while bulk synchronization can follow an appropriate alternate. Verify it using: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA. The associated corrective action is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific Performance-class loss latency and jitter thresholds requirement. For this scenario, the proper response is: Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences. Verify it through: Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
B:That outcome is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Performance-class loss latency and jitter thresholds requirement.
D:That outcome is relevant to the distinct Meraki subject of vMX traffic symmetry and cloud return routing, not the specific Performance-class loss latency and jitter thresholds requirement.
Question 225
A Meraki operations reviewer examines this case. A call center sees speech clipping during packet-loss spikes despite otherwise low average WAN bandwidth use. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Disable all access controls because one unmanaged printer lacks a compatible 802.1X supplicant.
- Treat a green WAN interface indicator as proof the path meets every application's quality requirement.
- Use only maximum download Mbps to decide whether a WAN link is suitable for delay-sensitive voice.
- Set a user-facing port to an unrestricted trunk and expect VLAN separation to become stronger automatically.
Explanation
Correct Answer
C:It conflicts with the relevant behavior: Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of MS 802.1X access control and RADIUS), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Performance-class loss latency and jitter thresholds: Use only maximum download Mbps to decide whether a WAN link is suitable for delay-sensitive voice.
B:That proposal is unsafe in its own context (the separate topic of Brownout versus hard WAN link-down detection), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Performance-class loss latency and jitter thresholds: Use only maximum download Mbps to decide whether a WAN link is suitable for delay-sensitive voice.
D:That proposal is unsafe in its own context (the separate topic of MS access and trunk port VLAN assignment), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Performance-class loss latency and jitter thresholds: Use only maximum download Mbps to decide whether a WAN link is suitable for delay-sensitive voice.
Question 226
A Cisco Meraki deployment engineer investigates this operational case: An ERP service must normally use a low-latency private circuit while guest web browsing can use broadband. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.
- Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
- Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
- Plan supported MS stack firmware maintenance with awareness of control-plane and access-port disruption.
Explanation
Correct Answer
B:The targeted next step is: Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink. The technical reason is: Meraki MX path choice can respond to flow preferences and measured link conditions, but correct match criteria and path health are essential.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Flow preferences and VPN path selection policy requirement.
C:That action is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Flow preferences and VPN path selection policy requirement.
D:That action is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific Flow preferences and VPN path selection policy requirement.
Question 227
A peer reviewer evaluates the following Meraki case. An ERP service must normally use a low-latency private circuit while guest web browsing can use broadband. The proposed action is: Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink. Which technical principle BEST supports this decision? Select ONE best answer.
- An uplink may remain physically up while excessive loss or latency makes it unsuitable for a critical flow.
- L3/L7 firewall and threat inspection may block different stages of a session; port reachability does not guarantee application permission.
- Virtual appliance capacity and cloud-region availability are design constraints distinct from simply adding more Auto VPN spokes.
- Meraki MX path choice can respond to flow preferences and measured link conditions, but correct match criteria and path health are essential.
Explanation
Correct Answer
D:Meraki MX path choice can respond to flow preferences and measured link conditions, but correct match criteria and path health are essential. In this situation (An ERP service must normally use a low-latency private circuit while guest web browsing can use broadband.), it justifies the action: Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Brownout versus hard WAN link-down detection, not the specific Flow preferences and VPN path selection policy requirement.
B:That principle is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific Flow preferences and VPN path selection policy requirement.
C:That principle is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Flow preferences and VPN path selection policy requirement.
Question 228
A Meraki support engineer must distinguish facts from assumptions. An ERP service must normally use a low-latency private circuit while guest web browsing can use broadband. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
- Audit network role assignments and test event viewing separately from actual change permissions.
- Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.
- Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
Explanation
Correct Answer
C:The discriminating evidence is: Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow. Expected result: The intended business application uses the preferred healthy VPN path and falls back only as designed.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Flow preferences and VPN path selection policy requirement.
B:That evidence is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Flow preferences and VPN path selection policy requirement.
D:That evidence is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Flow preferences and VPN path selection policy requirement. For this scenario, the proper response is: Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
Question 229
An implementation lead needs a measurable acceptance criterion for a Meraki change. An ERP service must normally use a low-latency private circuit while guest web browsing can use broadband. The proposed validation is: Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The client population maintains acceptable airtime and roaming behavior under a representative load.
- Approved application traffic succeeds while prohibited categories and services remain blocked and auditable.
- The intended business application uses the preferred healthy VPN path and falls back only as designed.
- Priority applications maintain their acceptable response while lower-priority traffic respects agreed limits.
Explanation
Correct Answer
C:The acceptance criterion is: The intended business application uses the preferred healthy VPN path and falls back only as designed. Verify it using: Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Flow preferences and VPN path selection policy requirement.
B:That outcome is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific Flow preferences and VPN path selection policy requirement.
D:That outcome is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Flow preferences and VPN path selection policy requirement.
Question 230
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An ERP service must normally use a low-latency private circuit while guest web browsing can use broadband. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.
- Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
- Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink.
- Select supervised or device-owner enrollment only for appropriate corporate devices and define a lighter approved BYOD path.
- Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
Explanation
Correct Answers
A:The discriminating evidence is: Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.
C:The targeted next step is: Use policy-based SD-WAN flow preferences tied to a known application or destination and verify the actual selected uplink. The technical reason is: Meraki MX path choice can respond to flow preferences and measured link conditions, but correct match criteria and path health are essential. A successful verification would use: Inspect traffic shaping rules, application classification, uplink performance and a sampled client flow.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific Flow preferences and VPN path selection policy requirement.
D:That action is relevant to the distinct Meraki subject of Systems Manager managed enrollment versus BYOD privacy, not the specific Flow preferences and VPN path selection policy requirement.
E:That action is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Flow preferences and VPN path selection policy requirement.