Cisco 500-220 Practice Test 16
Question 150
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
- Select supervised or device-owner enrollment only for appropriate corporate devices and define a lighter approved BYOD path.
- Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.
- Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
- Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
Explanation
Correct Answers
A:The discriminating evidence is: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
D:The targeted next step is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. The technical reason is: A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails. A successful verification would use: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Systems Manager managed enrollment versus BYOD privacy, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That action is relevant to the distinct Meraki subject of End-to-end QoS trust and voice policy, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
E:That evidence is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 151
A Cisco Meraki deployment engineer investigates this operational case: A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
- Check supported Sentry integration, managed device identity and network authentication for a controlled managed-device access policy.
- Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
- Confirm that each site advertises the intended nonoverlapping VPN-enabled local networks before diagnosing a missing branch route.
Explanation
Correct Answer
A:The targeted next step is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That action is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
D:That action is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Multi-hub Auto VPN resiliency and routing preference requirement. For this scenario, the proper response is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. Verify it through: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Question 152
A peer reviewer evaluates the following Meraki case. A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary. The proposed action is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. Which technical principle BEST supports this decision? Select ONE best answer.
- In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
- Dynamic routing relies on consistent interfaces, adjacency and advertisement policy; the presence of an MX does not imply automatic OSPF peering everywhere.
- Layer-2 controls protect local switching domains but must distinguish trusted infrastructure ports from client access edges.
- A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails.
Explanation
Correct Answer
D:A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails. In this situation (A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary.), it justifies the action: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Multi-hub Auto VPN resiliency and routing preference requirement. For this scenario, the proper response is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. Verify it through: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
B:That principle is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That principle is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 153
A Meraki support engineer must distinguish facts from assumptions. A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Review AP channel plan, utilization, retry rates and client roaming before and after a pilot change.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
- Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
Explanation
Correct Answer
B:Applied to the described situation (A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary.), it should establish: The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MR RF profiles and channel width optimization, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That evidence is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
D:That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 154
An implementation lead needs a measurable acceptance criterion for a Meraki change. A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary. The proposed validation is: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent.
- The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration.
- The rollout is promoted only after the representative pilot validates the required user paths and management state.
- Visitors obtain usable Internet access but cannot reach staff servers or other blocked networks.
Explanation
Correct Answer
B:The acceptance criterion is: The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration. Verify it using: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage. The associated corrective action is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That outcome is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
D:That outcome is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 155
A Meraki operations reviewer examines this case. A school district has a hub at headquarters and another in a DR site, but branch subnets appear behind only the primary. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Declare a port secure simply because the Meraki switch has a valid IP address for Dashboard management.
- Assume an unenrolled personal phone already has full corporate supervised-device management rights.
- Configure hundreds of low-use outlets as full mesh simply because every location has an MX.
- List a second datacenter as an unused spare device without verifying any VPN routes to it.
Explanation
Correct Answer
D:It conflicts with the relevant behavior: A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Layer two protections and unauthorized DHCP sources), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Multi-hub Auto VPN resiliency and routing preference: List a second datacenter as an unused spare device without verifying any VPN routes to it.
B:That proposal is unsafe in its own context (the separate topic of Systems Manager MDM enrollment and compliance profiles), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Multi-hub Auto VPN resiliency and routing preference: List a second datacenter as an unused spare device without verifying any VPN routes to it.
C:That proposal is unsafe in its own context (the separate topic of Mesh Auto VPN scaling and required lateral paths), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Multi-hub Auto VPN resiliency and routing preference: List a second datacenter as an unused spare device without verifying any VPN routes to it.
Question 156
A Cisco Meraki deployment engineer investigates this operational case: A research consortium requires low-latency direct VPN paths among six labs but only hub access for fifty kiosks. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Confirm that each site advertises the intended nonoverlapping VPN-enabled local networks before diagnosing a missing branch route.
- Define a guest-authorization and isolation path that supports Internet access without access to staff LAN services.
- Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale.
- Use a corporate SSID with an appropriate identity method and VLAN assignment, separate from guest access.
Explanation
Correct Answer
C:Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale. The technical reason is: Hub-to-hub participation can enable meshing while spoke designs reduce unnecessary peer relationships in large deployments. A successful verification would use: Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
B:That action is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
D:That action is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
Question 157
A peer reviewer evaluates the following Meraki case. A research consortium requires low-latency direct VPN paths among six labs but only hub access for fifty kiosks. The proposed action is: Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale. Which technical principle BEST supports this decision? Select ONE best answer.
- A managed app may require assignment, enrollment, licensing and platform support; an enrollment record does not mean every app installs.
- In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
- Hardware families and firmware trains can have different capabilities; presence of a setting in one network does not guarantee it exists elsewhere.
- Hub-to-hub participation can enable meshing while spoke designs reduce unnecessary peer relationships in large deployments.
Explanation
Correct Answer
D:Hub-to-hub participation can enable meshing while spoke designs reduce unnecessary peer relationships in large deployments. In this situation (A research consortium requires low-latency direct VPN paths among six labs but only hub access for fifty kiosks.), it justifies the action: Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Managed app rollout and assignment scoping, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
B:That principle is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
C:That principle is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
Question 158
A Meraki support engineer must distinguish facts from assumptions. A research consortium requires low-latency direct VPN paths among six labs but only hub access for fifty kiosks. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.
- Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.
- Compare alert history, device online status and matching client or uplink events during the incident window.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Explanation
Correct Answer
B:The discriminating evidence is: Inventory required site-to-site flows and evaluate peer topology against supported appliance scale. Expected result: Only justified site pairs establish the needed encrypted paths while large branch fleets remain manageable.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
C:That evidence is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
D:That evidence is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
Question 159
An implementation lead needs a measurable acceptance criterion for a Meraki change. A research consortium requires low-latency direct VPN paths among six labs but only hub access for fifty kiosks. The proposed validation is: Inventory required site-to-site flows and evaluate peer topology against supported appliance scale. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Only justified site pairs establish the needed encrypted paths while large branch fleets remain manageable.
- The field technician reports a specific management connectivity defect without unnecessarily resetting healthy equipment.
- The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration.
- Priority applications maintain their acceptable response while lower-priority traffic respects agreed limits.
Explanation
Correct Answer
A:The acceptance criterion is: Only justified site pairs establish the needed encrypted paths while large branch fleets remain manageable. Verify it using: Inventory required site-to-site flows and evaluate peer topology against supported appliance scale. The associated corrective action is: Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
C:That outcome is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
D:That outcome is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
Question 160
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A research consortium requires low-latency direct VPN paths among six labs but only hub access for fifty kiosks. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Inspect the configured collector, export transport, sampling context and observed flow keys for a controlled session.
- Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.
- Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale.
- Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
- Compare selected organization, networks, time period, report recipients and raw Dashboard activity for a known date.
Explanation
Correct Answers
B:The discriminating evidence is: Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.
C:The targeted next step is: Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale. The technical reason is: Hub-to-hub participation can enable meshing while spoke designs reduce unnecessary peer relationships in large deployments.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of NetFlow export and traffic visibility limits, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
D:That evidence is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific Mesh Auto VPN scaling and required lateral paths requirement.
E:That evidence is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific Mesh Auto VPN scaling and required lateral paths requirement.