Cisco 500-220 Practice Test 15
Question 140
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
- Compare SM managed-device status, MR/MX integration, issued credentials and an actual client connection.
- Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
- Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
- Compare baseline application response measurements, configured thresholds and controlled warning events.
Explanation
Correct Answers
C:The discriminating evidence is: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
D:The targeted next step is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. The technical reason is: In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke. A successful verification would use: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Auto VPN hub-and-spoke site reachability requirement.
B:That evidence is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. Verify it through: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
E:That evidence is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Auto VPN hub-and-spoke site reachability requirement.
Question 141
A Cisco Meraki deployment engineer investigates this operational case: A manufacturer sets all distant sites to spoke mode and then expects direct site-to-site reachability without any hub path. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Apply guest SSID access, splash and LAN-isolation settings that preserve required DHCP, DNS and permitted Internet services.
- Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
- Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
- Confirm that each site advertises the intended nonoverlapping VPN-enabled local networks before diagnosing a missing branch route.
Explanation
Correct Answer
B:The targeted next step is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That action is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Auto VPN hub-and-spoke site reachability requirement.
D:That action is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. Verify it through: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
Question 142
A peer reviewer evaluates the following Meraki case. A manufacturer sets all distant sites to spoke mode and then expects direct site-to-site reachability without any hub path. The proposed action is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. Which technical principle BEST supports this decision? Select ONE best answer.
- In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
- A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails.
- Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure.
- Auto VPN route distribution depends on included subnets and compatible addressing; overlapping prefixes can produce ambiguous destinations.
Explanation
Correct Answer
A:In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke. In this situation (A manufacturer sets all distant sites to spoke mode and then expects direct site-to-site reachability without any hub path.), it justifies the action: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That principle is relevant to the distinct Meraki subject of Dashboard API organization rate limiting and retry, not the specific Auto VPN hub-and-spoke site reachability requirement.
D:That principle is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Auto VPN hub-and-spoke site reachability requirement.
Question 143
A Meraki support engineer must distinguish facts from assumptions. A manufacturer sets all distant sites to spoke mode and then expects direct site-to-site reachability without any hub path. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Compare spectrum survey, channel overlap, expected client count, airtime use and retries at peak occupancy.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Explanation
Correct Answer
A:The discriminating evidence is: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch. Expected result: The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That evidence is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Auto VPN hub-and-spoke site reachability requirement.
D:That evidence is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Auto VPN hub-and-spoke site reachability requirement.
Question 144
An implementation lead needs a measurable acceptance criterion for a Meraki change. A manufacturer sets all distant sites to spoke mode and then expects direct site-to-site reachability without any hub path. The proposed validation is: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The investigation determines whether traffic was blocked, allowed or requires a separate host response.
- Read-only responders access required diagnostics without the ability to alter production firewall or SSID policy.
- The outside partner's protected subnet is reachable through an explicitly configured compatible tunnel.
- The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent.
Explanation
Correct Answer
D:The acceptance criterion is: The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent. Verify it using: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch. The associated corrective action is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Auto VPN hub-and-spoke site reachability requirement.
B:That outcome is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That outcome is relevant to the distinct Meraki subject of Non-Meraki peer versus native Auto VPN compatibility, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. Verify it through: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
Question 145
A Meraki operations reviewer examines this case. A manufacturer sets all distant sites to spoke mode and then expects direct site-to-site reachability without any hub path. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Promise a full year of continuous high-resolution video on any camera without checking its storage.
- Post a production API key in a public issue to prove that the network endpoint is reachable.
- Assume setting every MX as a spoke automatically creates a full spoke-to-spoke mesh.
- Configure hundreds of low-use outlets as full mesh simply because every location has an MX.
Explanation
Correct Answer
C:It conflicts with the relevant behavior: In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of MV camera retention and storage planning), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Auto VPN hub-and-spoke site reachability: Assume setting every MX as a spoke automatically creates a full spoke-to-spoke mesh.
B:That proposal is unsafe in its own context (the separate topic of Meraki Dashboard API authentication and scoped permissions), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Auto VPN hub-and-spoke site reachability: Assume setting every MX as a spoke automatically creates a full spoke-to-spoke mesh.
D:That proposal is unsafe in its own context (the separate topic of Mesh Auto VPN scaling and required lateral paths), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Auto VPN hub-and-spoke site reachability: Assume setting every MX as a spoke automatically creates a full spoke-to-spoke mesh.
Question 146
A Cisco Meraki deployment engineer investigates this operational case: A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
- Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
- Confirm that each site advertises the intended nonoverlapping VPN-enabled local networks before diagnosing a missing branch route.
- Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Explanation
Correct Answer
B:The targeted next step is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. The technical reason is: A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Layer two loop and spanning tree diagnosis, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That action is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Multi-hub Auto VPN resiliency and routing preference requirement. For this scenario, the proper response is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
D:That action is relevant to the distinct Meraki subject of Product family capabilities and integrated Dashboard view, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 147
A peer reviewer evaluates the following Meraki case. A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime. The proposed action is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. Which technical principle BEST supports this decision? Select ONE best answer.
- A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails.
- The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port.
- In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
- Sentry-assisted connectivity uses managed device and network context; merely tagging a phone does not automatically prove successful WLAN onboarding.
Explanation
Correct Answer
A:A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails. In this situation (A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime.), it justifies the action: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That principle is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Multi-hub Auto VPN resiliency and routing preference requirement. For this scenario, the proper response is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
D:That principle is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 148
A Meraki support engineer must distinguish facts from assumptions. A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect returned Link next-page information, accumulated serial IDs and a Dashboard inventory comparison.
- Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.
- Review app assignment, affected device tags, installation report and a reference endpoint test.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Explanation
Correct Answer
D:The discriminating evidence is: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage. Expected result: The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
B:That evidence is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That evidence is relevant to the distinct Meraki subject of Systems Manager application deployment and tag scope, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 149
An implementation lead needs a measurable acceptance criterion for a Meraki change. A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime. The proposed validation is: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The remote collector receives the expected event with correct device and time metadata.
- Authorized managed clients connect with correct identity and network rights; unauthorized clients do not.
- The advertised destination appears through an unambiguous VPN route and the tested application reaches the proper site.
- The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration.
Explanation
Correct Answer
D:The acceptance criterion is: The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration. Verify it using: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
B:That outcome is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That outcome is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
Question 150
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A logistics provider runs two regional hubs and needs branches to survive one hub's planned downtime. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
- Select supervised or device-owner enrollment only for appropriate corporate devices and define a lighter approved BYOD path.
- Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.
- Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
- Check the MX route list, downstream interface addressing and forward/return reachability to a test endpoint.
Explanation
Correct Answers
A:The discriminating evidence is: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
D:The targeted next step is: Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site. The technical reason is: A hub order and reachable advertised routes affect the spoke's selected path and resilience when a hub fails. A successful verification would use: Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Systems Manager managed enrollment versus BYOD privacy, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
C:That action is relevant to the distinct Meraki subject of End-to-end QoS trust and voice policy, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.
E:That evidence is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific Multi-hub Auto VPN resiliency and routing preference requirement.