Cisco 500-220 Practice Test 14
Question 130
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A managed service provider adds a switch profile to many sites without testing printer VLAN reachability at a reference site. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
- Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.
- Test captive portal redirection, permitted DNS/DHCP, Internet egress and denied internal subnet access.
- Treat an online green Dashboard icon as proof every ACL, DHCP scope and application path works end to end.
- Use a small controlled pilot with documented acceptance checks before rolling an organization-wide Meraki configuration change.
Explanation
Correct Answers
A:The discriminating evidence is: Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
E:The targeted next step is: Use a small controlled pilot with documented acceptance checks before rolling an organization-wide Meraki configuration change.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific Deployment validation and change evidence requirement.
C:That evidence is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific Deployment validation and change evidence requirement.
D:The controlled response is: Use a small controlled pilot with documented acceptance checks before rolling an organization-wide Meraki configuration change.
Question 131
A Cisco Meraki deployment engineer investigates this operational case: A chain operator finds one branch's DNS settings changed after local maintenance and needs to attribute the change to an account. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
- Review the change history and intended template state when a branch differs from its standard design.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
- Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
Explanation
Correct Answer
B:Manual overrides and template changes can produce drift that must be identified against a recorded baseline.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Bulk device claim and zero-touch staging, not the specific Template drift and configuration audit requirement.
C:That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Template drift and configuration audit requirement.
D:That action is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Template drift and configuration audit requirement.
Question 132
A peer reviewer evaluates the following Meraki case. A chain operator finds one branch's DNS settings changed after local maintenance and needs to attribute the change to an account. The proposed action is: Review the change history and intended template state when a branch differs from its standard design. Which technical principle BEST supports this decision? Select ONE best answer.
- Manual overrides and template changes can produce drift that must be identified against a recorded baseline.
- Uplink traffic volume and path-quality indicators are different metrics; high utilization alone does not prove packet loss.
- Templates help standardize supported common settings across networks, while site address plans and exceptions still need correct per-site values.
- Sentry-assisted connectivity uses managed device and network context; merely tagging a phone does not automatically prove successful WLAN onboarding.
Explanation
Correct Answer
A:Manual overrides and template changes can produce drift that must be identified against a recorded baseline. In this situation (A chain operator finds one branch's DNS settings changed after local maintenance and needs to attribute the change to an account.), it justifies the action: Review the change history and intended template state when a branch differs from its standard design.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Template drift and configuration audit requirement.
C:That principle is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific Template drift and configuration audit requirement.
D:That principle is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Template drift and configuration audit requirement.
Question 133
A Meraki support engineer must distinguish facts from assumptions. A chain operator finds one branch's DNS settings changed after local maintenance and needs to attribute the change to an account. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration.
- Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
- Review app assignment, affected device tags, installation report and a reference endpoint test.
- Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
Explanation
Correct Answer
A:The discriminating evidence is: Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration. Expected result: The branch is restored to the documented standard while an authorized exception remains recorded.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Template drift and configuration audit requirement.
C:That evidence is relevant to the distinct Meraki subject of Systems Manager application deployment and tag scope, not the specific Template drift and configuration audit requirement.
D:That evidence is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific Template drift and configuration audit requirement.
Question 134
An implementation lead needs a measurable acceptance criterion for a Meraki change. A chain operator finds one branch's DNS settings changed after local maintenance and needs to attribute the change to an account. The proposed validation is: Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The branch is restored to the documented standard while an authorized exception remains recorded.
- The staged units appear in the intended network and receive only the approved local configuration after check-in.
- The on-premises branch reaches the approved private cloud service through a valid end-to-end route.
- The requested changes reach exactly intended networks and can be reversed using recorded configuration.
Explanation
Correct Answer
A:The associated corrective action is: Review the change history and intended template state when a branch differs from its standard design.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Bulk device claim and zero-touch staging, not the specific Template drift and configuration audit requirement.
C:That outcome is relevant to the distinct Meraki subject of vMX private cloud connectivity and deployment mode, not the specific Template drift and configuration audit requirement.
D:That outcome is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Template drift and configuration audit requirement.
Question 135
A Meraki operations reviewer examines this case. A chain operator finds one branch's DNS settings changed after local maintenance and needs to attribute the change to an account. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Erase a branch's known-good VLAN mapping merely because its configuration differs from a template screenshot.
- Place both MX units behind the same unplugged power strip and claim hardware redundancy guarantees site uptime.
- Mark all traffic as highest priority to eliminate congestion without any class separation.
- Claim a large unverified serial list into the production organization without matching the purchase order.
Explanation
Correct Answer
A:It conflicts with the relevant behavior: Manual overrides and template changes can produce drift that must be identified against a recorded baseline.
Incorrect Answers
B:That proposal is unsafe in its own context (the separate topic of MX high availability warm spare and uplink failover), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Template drift and configuration audit: Erase a branch's known-good VLAN mapping merely because its configuration differs from a template screenshot.
C:That proposal is unsafe in its own context (the separate topic of MS QoS trust and voice traffic classification), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Template drift and configuration audit: Erase a branch's known-good VLAN mapping merely because its configuration differs from a template screenshot.
D:That proposal is unsafe in its own context (the separate topic of Bulk device claim and zero-touch staging), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Template drift and configuration audit: Erase a branch's known-good VLAN mapping merely because its configuration differs from a template screenshot.
Question 136
A Cisco Meraki deployment engineer investigates this operational case: A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Correlate Meraki Security Center threat detections to a matching source device and policy decision before containment.
- Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
- Distinguish a delayed upgrade from a failed upgrade and follow supported recovery and escalation steps rather than manual image tampering.
- Confirm that each site advertises the intended nonoverlapping VPN-enabled local networks before diagnosing a missing branch route.
Explanation
Correct Answer
B:The targeted next step is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. The technical reason is: In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That action is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific Auto VPN hub-and-spoke site reachability requirement.
D:That action is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Question 137
A peer reviewer evaluates the following Meraki case. A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores. The proposed action is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. Which technical principle BEST supports this decision? Select ONE best answer.
- Hardware families and firmware trains can have different capabilities; presence of a setting in one network does not guarantee it exists elsewhere.
- An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication.
- Hub-to-hub participation can enable meshing while spoke designs reduce unnecessary peer relationships in large deployments.
- In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke.
Explanation
Correct Answer
D:In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke. In this situation (A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores.), it justifies the action: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific Auto VPN hub-and-spoke site reachability requirement.
B:That principle is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That principle is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific Auto VPN hub-and-spoke site reachability requirement.
Question 138
A Meraki support engineer must distinguish facts from assumptions. A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare remote VPN route tables, local VLAN VPN participation and site address inventory.
- Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
- Inspect device enrollment, installed configuration profiles, OS support and compliance or security status.
- Compare SM managed-device status, MR/MX integration, issued credentials and an actual client connection.
Explanation
Correct Answer
B:The discriminating evidence is: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch. Expected result: The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That evidence is relevant to the distinct Meraki subject of Systems Manager MDM enrollment and compliance profiles, not the specific Auto VPN hub-and-spoke site reachability requirement.
D:That evidence is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Question 139
An implementation lead needs a measurable acceptance criterion for a Meraki change. A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores. The proposed validation is: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The support team isolates local connectivity failure from remote management loss without inventing unsupported local configuration access.
- Approved application traffic succeeds while prohibited categories and services remain blocked and auditable.
- The outside partner's protected subnet is reachable through an explicitly configured compatible tunnel.
- The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent.
Explanation
Correct Answer
D:The acceptance criterion is: The branch reaches approved hub-hosted applications while unnecessary inter-spoke tunnels are absent. Verify it using: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Local status page versus cloud Dashboard troubleshooting, not the specific Auto VPN hub-and-spoke site reachability requirement.
B:That outcome is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific Auto VPN hub-and-spoke site reachability requirement.
C:That outcome is relevant to the distinct Meraki subject of Non-Meraki peer versus native Auto VPN compatibility, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Question 140
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A retailer has eighty branches that need warehouse services in two datacenters but not lateral access between stores. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
- Compare SM managed-device status, MR/MX integration, issued credentials and an actual client connection.
- Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
- Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
- Compare baseline application response measurements, configured thresholds and controlled warning events.
Explanation
Correct Answers
C:The discriminating evidence is: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
D:The targeted next step is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. The technical reason is: In an Auto VPN hub-and-spoke topology, spokes build their VPN relationships to configured hubs, not automatically to every other spoke. A successful verification would use: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Auto VPN hub-and-spoke site reachability requirement.
B:That evidence is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Auto VPN hub-and-spoke site reachability requirement. For this scenario, the proper response is: Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association. Verify it through: Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
E:That evidence is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Auto VPN hub-and-spoke site reachability requirement.