Cisco 300-420 Practice Test 8
Question 70
A branch needs subsecond failover but its alternate EIGRP route does not satisfy the feasibility condition. The observed fault is: Assuming every learned alternative is feasible can overstate guaranteed convergence and cause outages. How should the issue be corrected and verified?
- The controlled recovery is to use only a Layer 2 port channel to replace a missing Layer 3 backup route.
- The controlled recovery is to treat any higher-metric neighbor advertisement as a guaranteed feasible successor.
- The controlled recovery is to improve topology or metric design and validate the actual backup route and reconvergence.
- The controlled recovery is to ignore feasibility and claim all backups switch without recalculation.
Explanation
Correct Answer
C:This corrects the described failure and provides a verifiable outcome. Relevant evidence includes eIGRP topology feasible distance, reported distance, successor and tested failover.
Incorrect Answers
A:Use only a Layer 2 port channel to replace a missing Layer 3 backup route. Assuming every learned alternative is feasible can overstate guaranteed convergence and cause outages. Use the controlled remediation: improve topology or metric design and validate the actual backup route and reconvergence.
B:Treat any higher-metric neighbor advertisement as a guaranteed feasible successor. Assuming every learned alternative is feasible can overstate guaranteed convergence and cause outages. Use the controlled remediation: improve topology or metric design and validate the actual backup route and reconvergence.
D:Ignore feasibility and claim all backups switch without recalculation. Assuming every learned alternative is feasible can overstate guaranteed convergence and cause outages. Use the controlled remediation: improve topology or metric design and validate the actual backup route and reconvergence.
Question 71
A large network has OSPF areas that do not connect logically to area 0 and routes fail between regions. Which operator action most directly resolves this condition?
- Build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries.
- Define several isolated area 0 segments and assume they form one backbone.
- Place regional areas without any ABR and rely on host routing.
- Use router-ID ordering instead of OSPF area design to connect regions.
Explanation
Correct Answer
A:OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. This is the specific corrective action for OSPF backbone and area boundary placement.
Incorrect Answers
B:Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. This change targets the wrong mechanism for OSPF backbone and area boundary placement.
C:Place regional areas without any ABR and rely on host routing. OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Instead inspect area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
D:Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use router-ID ordering instead of OSPF area design to connect regions.
Question 72
A large network has OSPF areas that do not connect logically to area 0 and routes fail between regions. Which collection of observations most directly tests the suspected cause?
- A marketing claim without measured routing, capacity or failure-domain evidence.
- Area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
- An old network diagram with no current route, policy, or redundancy state.
- A feature-license screenshot without the required design or acceptance tests.
Explanation
Correct Answer
B:OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. This evidence observes the actual OSPF backbone and area boundary placement mechanism and its result.
Incorrect Answers
A:This observation alone cannot establish OSPF backbone and area boundary placement. The decisive evidence instead includes area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
C:This observation alone cannot establish OSPF backbone and area boundary placement. OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas.
D:This observation alone cannot establish OSPF backbone and area boundary placement. A feature-license screenshot without the required design or acceptance tests.
Question 73
A large network has OSPF areas that do not connect logically to area 0 and routes fail between regions. Which system behavior underlies the appropriate response?
- A longer IP prefix is always less specific than the default route.
- OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas.
- Cloud connectivity automatically removes any requirement for routing or policy.
- Any single device automatically guarantees high availability for every site.
Explanation
Correct Answer
B:This is why the appropriate action is build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries. Confirm it with area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Incorrect Answers
A:A longer IP prefix is always less specific than the default route. This is an incorrect generalization for OSPF backbone and area boundary placement. The relevant rule is OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Verify using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
C:Cloud connectivity automatically removes any requirement for routing or policy. This is an incorrect generalization for OSPF backbone and area boundary placement. The relevant rule is OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Verify using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
D:Any single device automatically guarantees high availability for every site. This is an incorrect generalization for OSPF backbone and area boundary placement. The relevant rule is OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Verify using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Question 74
A large network has OSPF areas that do not connect logically to area 0 and routes fail between regions. Suppose the operator instead makes this incorrect change: Define several isolated area 0 segments and assume they form one backbone. Which failure or risk follows from this shortcut?
- A healthy unrelated system proves the intended failure domain is protected.
- The failure is entirely cosmetic because all control-plane changes are harmless.
- Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes.
- Collecting telemetry originally caused the missing route or service outage.
Explanation
Correct Answer
C:This explains why the proposed shortcut does not solve OSPF backbone and area boundary placement. OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas.
Incorrect Answers
A:A healthy unrelated system proves the intended failure domain is protected. The actual failure is disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Check area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
B:The failure is entirely cosmetic because all control-plane changes are harmless. The actual failure is disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Check area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
D:Collecting telemetry originally caused the missing route or service outage. The actual failure is disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Check area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Question 75
A large network has OSPF areas that do not connect logically to area 0 and routes fail between regions. The observed fault is: Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. What action most directly restores and validates the intended state?
- Place regional areas without any ABR and rely on host routing.
- Correct ABR placement and backbone connectivity and validate routes across areas.
- Use router-ID ordering instead of OSPF area design to connect regions.
- Define several isolated area 0 segments and assume they form one backbone.
Explanation
Correct Answer
B:OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. This corrects the described failure and provides a verifiable outcome.
Incorrect Answers
A:Place regional areas without any ABR and rely on host routing. Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use the controlled remediation: correct ABR placement and backbone connectivity and validate routes across areas.
C:Use router-ID ordering instead of OSPF area design to connect regions. Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use the controlled remediation: correct ABR placement and backbone connectivity and validate routes across areas.
D:Define several isolated area 0 segments and assume they form one backbone. Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use the controlled remediation: correct ABR placement and backbone connectivity and validate routes across areas.
Question 76
A campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic. Which enterprise design procedure best meets this requirement?
- For this enterprise design, the architect should place regional areas without any ABR and rely on host routing.
- For this enterprise design, the architect should build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries.
- For this enterprise design, the architect should use router-ID ordering instead of OSPF area design to connect regions.
- For this enterprise design, the architect should define several isolated area 0 segments and assume they form one backbone.
Explanation
Correct Answer
B:OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Confirm the result using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Incorrect Answers
A:Place regional areas without any ABR and rely on host routing. OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Instead inspect area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
C:Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes.
D:Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. The relevant action is build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries.
Question 77
A campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic. Which evidence best distinguishes the intended state from a superficial indicator?
- Inspect the following evidence: area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
- Inspect the following evidence: one successful ping to an unrelated test host without a path or failover test.
- Inspect the following evidence: a marketing claim without measured routing, capacity or failure-domain evidence.
- Inspect the following evidence: an old network diagram with no current route, policy, or redundancy state.
Explanation
Correct Answer
A:OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. The intended procedure is build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries.
Incorrect Answers
B:This observation alone cannot establish OSPF backbone and area boundary placement. One successful ping to an unrelated test host without a path or failover test.
C:This observation alone cannot establish OSPF backbone and area boundary placement. A marketing claim without measured routing, capacity or failure-domain evidence.
D:This observation alone cannot establish OSPF backbone and area boundary placement. In this case, a campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic.
Question 78
A campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic. Which underlying principle explains the correct decision?
- The relevant principle is that any single device automatically guarantees high availability for every site.
- The relevant principle is that a longer IP prefix is always less specific than the default route.
- The relevant principle is that OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas.
- The relevant principle is that an operational up state alone proves every security and design objective is met.
Explanation
Correct Answer
C:This is why the appropriate action is build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries. In this case, a campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic.
Incorrect Answers
A:Any single device automatically guarantees high availability for every site. This is an incorrect generalization for OSPF backbone and area boundary placement. The relevant rule is OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Verify using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
B:A longer IP prefix is always less specific than the default route. This is an incorrect generalization for OSPF backbone and area boundary placement. The relevant rule is OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Verify using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
D:An operational up state alone proves every security and design objective is met. This is an incorrect generalization for OSPF backbone and area boundary placement. The relevant rule is OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Verify using area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Question 79
A campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic. Suppose the operator instead makes this incorrect change: Define several isolated area 0 segments and assume they form one backbone. What is the most material consequence of that mistake?
- The resulting technical fault is that collecting telemetry originally caused the missing route or service outage.
- The resulting technical fault is that a correct change-control review makes all WAN carriers fail simultaneously.
- The resulting technical fault is that the failure is entirely cosmetic because all control-plane changes are harmless.
- The resulting technical fault is that disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes.
Explanation
Correct Answer
D:This explains why the proposed shortcut does not solve OSPF backbone and area boundary placement. The right response is build a connected OSPF area 0 backbone with suitable ABRs and consistent interarea boundaries.
Incorrect Answers
A:Collecting telemetry originally caused the missing route or service outage. The actual failure is disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Check area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
B:A correct change-control review makes all WAN carriers fail simultaneously. The actual failure is disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Check area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
C:The failure is entirely cosmetic because all control-plane changes are harmless. The actual failure is disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Check area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Question 80
A campus expansion creates multiple OSPF areas and the architect wants localized topology and predictable interarea traffic. The observed fault is: Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Which controlled remediation should be used?
- The controlled recovery is to use router-ID ordering instead of OSPF area design to connect regions.
- The controlled recovery is to define several isolated area 0 segments and assume they form one backbone.
- The controlled recovery is to place regional areas without any ABR and rely on host routing.
- The controlled recovery is to correct ABR placement and backbone connectivity and validate routes across areas.
Explanation
Correct Answer
D:OSPF interarea routing normally relies on a logical area 0 backbone and ABRs connecting other areas. Relevant evidence includes area and neighbor database, Type-3 summaries, backbone continuity and reachability tests.
Incorrect Answers
A:Use router-ID ordering instead of OSPF area design to connect regions. Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use the controlled remediation: correct ABR placement and backbone connectivity and validate routes across areas.
B:Define several isolated area 0 segments and assume they form one backbone. Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use the controlled remediation: correct ABR placement and backbone connectivity and validate routes across areas.
C:Place regional areas without any ABR and rely on host routing. Disconnected or misattached OSPF areas can leave healthy local neighbors but broken interarea routes. Use the controlled remediation: correct ABR placement and backbone connectivity and validate routes across areas.