Cisco 300-420 Practice Test 4
Question 30
A service provider style enterprise uses one IS-IS backbone and several access areas with different scaling needs. The observed fault is: Building isolated Level-2 islands can prevent intended interarea connectivity despite healthy local adjacencies. How should the issue be corrected and verified?
- The controlled recovery is to use an Ethernet VLAN ID as the IS-IS area boundary instead of router-level design.
- The controlled recovery is to make several disconnected Level-2 backbones and assume local adjacencies connect them automatically.
- The controlled recovery is to repair the backbone or area border placement and validate interarea prefixes end to end.
- The controlled recovery is to place every access router into a single global topology without a scale assessment.
Explanation
Correct Answer
C:Relevant evidence includes level-1 and Level-2 adjacency tables, area IDs, LSP scope and interarea route reachability. This corrects the described failure and provides a verifiable outcome.
Incorrect Answers
A:Use an Ethernet VLAN ID as the IS-IS area boundary instead of router-level design. Building isolated Level-2 islands can prevent intended interarea connectivity despite healthy local adjacencies. Use the controlled remediation: repair the backbone or area border placement and validate interarea prefixes end to end.
B:Make several disconnected Level-2 backbones and assume local adjacencies connect them automatically. Building isolated Level-2 islands can prevent intended interarea connectivity despite healthy local adjacencies. Use the controlled remediation: repair the backbone or area border placement and validate interarea prefixes end to end.
D:Place every access router into a single global topology without a scale assessment. Building isolated Level-2 islands can prevent intended interarea connectivity despite healthy local adjacencies. Use the controlled remediation: repair the backbone or area border placement and validate interarea prefixes end to end.
Question 31
A regional IS-IS area must favor a high-capacity exit without leaking the full core table into access nodes. Which operator action most directly resolves this condition?
- Leak every Level-2 prefix into every Level-1 area without control.
- Assign arbitrary metrics without comparing link capacity and failure outcomes.
- Assume changing a device hostname changes IS-IS shortest paths.
- Use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy.
Explanation
Correct Answer
D:Confirm the result using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
Incorrect Answers
A:Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. The relevant action is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy.
B:Assign arbitrary metrics without comparing link capacity and failure outcomes. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Instead inspect iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
C:Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Assume changing a device hostname changes IS-IS shortest paths.
Question 32
A regional IS-IS area must favor a high-capacity exit without leaking the full core table into access nodes. Which collection of observations most directly tests the suspected cause?
- One successful ping to an unrelated test host without a path or failover test.
- IS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
- A hostname inventory without effective configuration or operational measurements.
- An old network diagram with no current route, policy, or redundancy state.
Explanation
Correct Answer
B:The intended procedure is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
Incorrect Answers
A:This observation alone cannot establish iS-IS metric and route-leak design. The decisive evidence instead includes iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
C:This observation alone cannot establish iS-IS metric and route-leak design. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
D:This observation alone cannot establish iS-IS metric and route-leak design. In this case, a regional IS-IS area must favor a high-capacity exit without leaking the full core table into access nodes.
Question 33
A regional IS-IS area must favor a high-capacity exit without leaking the full core table into access nodes. Which system behavior underlies the appropriate response?
- Encryption and segmentation are identical mechanisms and can replace each other.
- A longer IP prefix is always less specific than the default route.
- IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
- An operational up state alone proves every security and design objective is met.
Explanation
Correct Answer
C:This is why the appropriate action is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy. Confirm it with iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
Incorrect Answers
A:Encryption and segmentation are identical mechanisms and can replace each other. This is an incorrect generalization for iS-IS metric and route-leak design. The relevant rule is iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Verify using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
B:A longer IP prefix is always less specific than the default route. This is an incorrect generalization for iS-IS metric and route-leak design. The relevant rule is iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Verify using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
D:An operational up state alone proves every security and design objective is met. This is an incorrect generalization for iS-IS metric and route-leak design. The relevant rule is iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Verify using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
Question 34
A regional IS-IS area must favor a high-capacity exit without leaking the full core table into access nodes. Suppose the operator instead makes this incorrect change: Leak every Level-2 prefix into every Level-1 area without control. Which failure or risk follows from this shortcut?
- Collecting telemetry originally caused the missing route or service outage.
- A correct change-control review makes all WAN carriers fail simultaneously.
- Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes.
- The only issue is an inaccurate hostname while traffic paths are unaffected.
Explanation
Correct Answer
C:The right response is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy. This explains why the proposed shortcut does not solve iS-IS metric and route-leak design.
Incorrect Answers
A:Collecting telemetry originally caused the missing route or service outage. The actual failure is uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Check iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
B:A correct change-control review makes all WAN carriers fail simultaneously. The actual failure is uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Check iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
D:The only issue is an inaccurate hostname while traffic paths are unaffected. The actual failure is uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Check iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
Question 35
A regional IS-IS area must favor a high-capacity exit without leaking the full core table into access nodes. The observed fault is: Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. What action most directly restores and validates the intended state?
- Correct metric and leaking policies then compare selected paths and table size.
- Assign arbitrary metrics without comparing link capacity and failure outcomes.
- Assume changing a device hostname changes IS-IS shortest paths.
- Leak every Level-2 prefix into every Level-1 area without control.
Explanation
Correct Answer
A:Relevant evidence includes iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
Incorrect Answers
B:Assign arbitrary metrics without comparing link capacity and failure outcomes. Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Use the controlled remediation: correct metric and leaking policies then compare selected paths and table size.
C:Assume changing a device hostname changes IS-IS shortest paths. Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Use the controlled remediation: correct metric and leaking policies then compare selected paths and table size.
D:Leak every Level-2 prefix into every Level-1 area without control. Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Use the controlled remediation: correct metric and leaking policies then compare selected paths and table size.
Question 36
An enterprise wants selective interarea route availability while preventing unexpected transit through an access area. Which enterprise design procedure best meets this requirement?
- For this enterprise design, the architect should use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy.
- For this enterprise design, the architect should assign arbitrary metrics without comparing link capacity and failure outcomes.
- For this enterprise design, the architect should assume changing a device hostname changes IS-IS shortest paths.
- For this enterprise design, the architect should leak every Level-2 prefix into every Level-1 area without control.
Explanation
Correct Answer
A:Confirm the result using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths. This is the specific corrective action for IS-IS metric and route-leak design.
Incorrect Answers
B:Assign arbitrary metrics without comparing link capacity and failure outcomes. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Instead inspect iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
C:Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes.
D:Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. This change targets the wrong mechanism for IS-IS metric and route-leak design.
Question 37
An enterprise wants selective interarea route availability while preventing unexpected transit through an access area. Which evidence best distinguishes the intended state from a superficial indicator?
- Inspect the following evidence: a feature-license screenshot without the required design or acceptance tests.
- Inspect the following evidence: iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
- Inspect the following evidence: one successful ping to an unrelated test host without a path or failover test.
- Inspect the following evidence: a hostname inventory without effective configuration or operational measurements.
Explanation
Correct Answer
B:The intended procedure is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy. This evidence observes the actual iS-IS metric and route-leak design mechanism and its result.
Incorrect Answers
A:This observation alone cannot establish iS-IS metric and route-leak design. A feature-license screenshot without the required design or acceptance tests.
C:This observation alone cannot establish iS-IS metric and route-leak design. One successful ping to an unrelated test host without a path or failover test.
D:This observation alone cannot establish iS-IS metric and route-leak design. A hostname inventory without effective configuration or operational measurements.
Question 38
An enterprise wants selective interarea route availability while preventing unexpected transit through an access area. Which underlying principle explains the correct decision?
- The relevant principle is that an operational up state alone proves every security and design objective is met.
- The relevant principle is that encryption and segmentation are identical mechanisms and can replace each other.
- The relevant principle is that cloud connectivity automatically removes any requirement for routing or policy.
- The relevant principle is that iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
Explanation
Correct Answer
D:This is why the appropriate action is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy.
Incorrect Answers
A:An operational up state alone proves every security and design objective is met. This is an incorrect generalization for iS-IS metric and route-leak design. The relevant rule is iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Verify using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
B:Encryption and segmentation are identical mechanisms and can replace each other. This is an incorrect generalization for iS-IS metric and route-leak design. The relevant rule is iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Verify using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
C:Cloud connectivity automatically removes any requirement for routing or policy. This is an incorrect generalization for iS-IS metric and route-leak design. The relevant rule is iS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology. Verify using iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
Question 39
An enterprise wants selective interarea route availability while preventing unexpected transit through an access area. Suppose the operator instead makes this incorrect change: Leak every Level-2 prefix into every Level-1 area without control. What is the most material consequence of that mistake?
- The resulting technical fault is that the only issue is an inaccurate hostname while traffic paths are unaffected.
- The resulting technical fault is that a healthy unrelated system proves the intended failure domain is protected.
- The resulting technical fault is that a correct change-control review makes all WAN carriers fail simultaneously.
- The resulting technical fault is that uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes.
Explanation
Correct Answer
D:The right response is use a reviewed IS-IS wide-metric plan and selective route leaking only where required by reachability policy. IS-IS metric design and controlled interlevel reachability determine preferred paths without exposing unnecessary topology.
Incorrect Answers
A:The only issue is an inaccurate hostname while traffic paths are unaffected. The actual failure is uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Check iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
B:A healthy unrelated system proves the intended failure domain is protected. The actual failure is uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Check iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
C:A correct change-control review makes all WAN carriers fail simultaneously. The actual failure is uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Check iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths.
Question 40
An enterprise wants selective interarea route availability while preventing unexpected transit through an access area. The observed fault is: Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Which controlled remediation should be used?
- The controlled recovery is to assume changing a device hostname changes IS-IS shortest paths.
- The controlled recovery is to leak every Level-2 prefix into every Level-1 area without control.
- The controlled recovery is to correct metric and leaking policies then compare selected paths and table size.
- The controlled recovery is to assign arbitrary metrics without comparing link capacity and failure outcomes.
Explanation
Correct Answer
C:Relevant evidence includes iS-IS LSP metrics, area boundary routes, route-leak policy matches and active best paths. This corrects the described failure and provides a verifiable outcome.
Incorrect Answers
A:Assume changing a device hostname changes IS-IS shortest paths. Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Use the controlled remediation: correct metric and leaking policies then compare selected paths and table size.
B:Leak every Level-2 prefix into every Level-1 area without control. Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Use the controlled remediation: correct metric and leaking policies then compare selected paths and table size.
D:Assign arbitrary metrics without comparing link capacity and failure outcomes. Uncontrolled leaking or inconsistent metrics can create unexpected paths or excessive access-area routes. Use the controlled remediation: correct metric and leaking policies then compare selected paths and table size.