Pure Storage FlashArray Implementation Specialist Practice Test 33
Question 320
An enterprise change review is deciding whether its response to ethernet optics matching has been justified. The fictional case facts are: A factory's target Ethernet link flaps because its patch type does not match the approved port optics. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Correct the as-built labels before accepting the implementation.
- Required module blanks and cabinet airflow controls are functional parts of a supported chassis installation.
- Replace unsupported optics with approved compatible components before enabling target traffic.
- The link negotiates the intended mode and remains error-free during a controlled load test.
- Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric.
- The shelf is recognized with healthy, redundant paths under the applicable supported configuration.
Explanation
Correct Answer
C:A factory's target Ethernet link flaps because its patch type does not match the approved port optics. Replace unsupported optics with approved compatible components before enabling target traffic. Verify the change by checking: The link negotiates the intended mode and remains error-free during a controlled load test. The action implements this principle: Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric.
D:The link negotiates the intended mode and remains error-free during a controlled load test. This shows whether the scoped response worked: Replace unsupported optics with approved compatible components before enabling target traffic. A factory's target Ethernet link flaps because its patch type does not match the approved port optics. The result should be supported by this evidence: Compare optical module specifications, connector type, speed settings and live link diagnostics.
E:Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric. A factory's target Ethernet link flaps because its patch type does not match the approved port optics. The comparison to make is: Compare optical module specifications, connector type, speed settings and live link diagnostics. That principle leads to a bounded response: Replace unsupported optics with approved compatible components before enabling target traffic.
Incorrect Answers
A:Correct the as-built labels before accepting the implementation. That change targets a separate rack labels and asset identification concern; the unresolved issue is: A factory's target Ethernet link flaps because its patch type does not match the approved port optics. The scoped response is: Replace unsupported optics with approved compatible components before enabling target traffic. The action should implement: Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric.
B:Required module blanks and cabinet airflow controls are functional parts of a supported chassis installation. That is a separate blanking and airflow integrity concern; it does not explain the case: A factory's target Ethernet link flaps because its patch type does not match the approved port optics. The governing distinction here is: Physical Ethernet links require transceivers and cabling supported by both selected ports and the switch fabric. The governing rule must instead lead to: Replace unsupported optics with approved compatible components before enabling target traffic.
F:The shelf is recognized with healthy, redundant paths under the applicable supported configuration. That outcome tests a separate directflash shelf supported topology concern, not whether the reported problem is fixed: A factory's target Ethernet link flaps because its patch type does not match the approved port optics. A directly relevant result would be: The link negotiates the intended mode and remains error-free during a controlled load test. The acceptance test needs evidence from: Compare optical module specifications, connector type, speed settings and live link diagnostics.
Question 321
A hypothetical FlashArray operations change concerns fibre channel target-port cabling in the Installation area. The change or incident record reports: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain.
- SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
- A physical link should be verified for supported speed, optics and error health after cabling.
- Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody.
Explanation
Correct Answer
B:SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The comparison to make is: Trace target port WWPNs through physical switch ports and current fabric maps.
Incorrect Answers
A:External shelf connections must follow the model-specific supported topology and cable placement rather than a convenient daisy chain. That is a separate directflash shelf supported topology concern; it does not explain the case: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
C:A physical link should be verified for supported speed, optics and error health after cabling. That is a separate switch port speed and error validation concern; it does not explain the case: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
D:Commissioning must restrict privileged accounts to authorized implementation staff and establish customer-owned custody. That is a separate privileged local account handoff concern; it does not explain the case: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
Question 322
During FlashArray administration concerning fibre channel target-port cabling, an operator reviews this fictional service issue: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals.
- Inspect current model port map, configured service role and actual switch connections.
- Trace target port WWPNs through physical switch ports and current fabric maps.
- Inspect NTP synchronization state, resolver list and service reachability after initial boot.
Explanation
Correct Answer
C:An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Trace target port WWPNs through physical switch ports and current fabric maps. These observations test the rule: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
Incorrect Answers
A:Compare host IQNs or WWPNs, access groups, intended volume mapping and application-owner approvals. Those checks address a separate host and host-group mapping safety concern, not the specific finding: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps.
B:Inspect current model port map, configured service role and actual switch connections. Those checks address a separate storage ethernet target-port role mapping concern, not the specific finding: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps.
D:Inspect NTP synchronization state, resolver list and service reachability after initial boot. Those checks address a separate time configuration at first startup concern, not the specific finding: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps.
Question 323
A change manager requests a safe and limited FlashArray response to a Installation problem involving fibre channel target-port cabling. The reported situation is: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Complete the approved registration workflow or document the supported restricted-site exception.
- Correct FC patching and zoning dependencies without changing unrelated production initiators.
- Resolve zoning, cabling or OS multipath gaps before approving application cutover.
- Replace unsupported optics with approved compatible components before enabling target traffic.
Explanation
Correct Answer
B:An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Correct FC patching and zoning dependencies without changing unrelated production initiators. Verify the change by checking: Hosts see expected target identities through each designated FC fabric.
Incorrect Answers
A:Complete the approved registration workflow or document the supported restricted-site exception. That change targets a separate pure1 registration and telemetry authorization concern; the unresolved issue is: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators.
C:Resolve zoning, cabling or OS multipath gaps before approving application cutover. That change targets a separate multipath configuration after presentation concern; the unresolved issue is: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators.
D:Replace unsupported optics with approved compatible components before enabling target traffic. That change targets a separate ethernet optics matching concern; the unresolved issue is: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators.
Question 324
Two independent FlashArray administrator reviewers discuss fibre channel target-port cabling. Their case record says: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Compare array serial label, cabinet position and port markers with the handoff inventory.
- Trace target port WWPNs through physical switch ports and current fabric maps.
- Inspect populated slots, blanking plates and model-specific thermal guidance.
- Establish a secured console session using the correct guide and keep initial credentials under controlled custody.
- Correct FC patching and zoning dependencies without changing unrelated production initiators.
Explanation
Correct Answer
B:An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Trace target port WWPNs through physical switch ports and current fabric maps. These observations test the rule: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. The evidence supports this limited action: Correct FC patching and zoning dependencies without changing unrelated production initiators.
E:An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Correct FC patching and zoning dependencies without changing unrelated production initiators. Verify the change by checking: Hosts see expected target identities through each designated FC fabric. The change should follow this observation: Trace target port WWPNs through physical switch ports and current fabric maps.
Incorrect Answers
A:Compare array serial label, cabinet position and port markers with the handoff inventory. Those checks address a separate rack labels and asset identification concern, not the specific finding: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps. The relevant observation must instead support: Correct FC patching and zoning dependencies without changing unrelated production initiators.
C:Inspect populated slots, blanking plates and model-specific thermal guidance. Those checks address a separate blanking and airflow integrity concern, not the specific finding: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps. The relevant observation must instead support: Correct FC patching and zoning dependencies without changing unrelated production initiators.
D:Establish a secured console session using the correct guide and keep initial credentials under controlled custody. That change targets a separate controller initialization through approved console concern; the unresolved issue is: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators. The authorized change must instead follow: Trace target port WWPNs through physical switch ports and current fabric maps.
Question 325
An enterprise change review is deciding whether its response to fibre channel target-port cabling has been justified. The fictional case facts are: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Hosts see expected target identities through each designated FC fabric.
- Initial local console access must use the vendor-approved method and protect privileged setup credentials.
- Reroute and secure cabling with supported lengths and defined service clearance.
- Correct FC patching and zoning dependencies without changing unrelated production initiators.
- The array boots into a supported specified release and health checks show no new faults.
- SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
Explanation
Correct Answer
A:Hosts see expected target identities through each designated FC fabric. This shows whether the scoped response worked: Correct FC patching and zoning dependencies without changing unrelated production initiators. An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The result should be supported by this evidence: Trace target port WWPNs through physical switch ports and current fabric maps.
D:An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. Correct FC patching and zoning dependencies without changing unrelated production initiators. Verify the change by checking: Hosts see expected target identities through each designated FC fabric. The action implements this principle: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
F:SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The comparison to make is: Trace target port WWPNs through physical switch ports and current fabric maps. That principle leads to a bounded response: Correct FC patching and zoning dependencies without changing unrelated production initiators.
Incorrect Answers
B:Initial local console access must use the vendor-approved method and protect privileged setup credentials. That is a separate controller initialization through approved console concern; it does not explain the case: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. The governing rule must instead lead to: Correct FC patching and zoning dependencies without changing unrelated production initiators.
C:Reroute and secure cabling with supported lengths and defined service clearance. That change targets a separate cable strain relief and service loops concern; the unresolved issue is: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators. The action should implement: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
E:The array boots into a supported specified release and health checks show no new faults. That outcome tests a separate purity software staging on newly installed hardware concern, not whether the reported problem is fixed: An online retailer's two FC storage cables both reach switches in one fabric even though the workbook specifies redundancy. A directly relevant result would be: Hosts see expected target identities through each designated FC fabric. The acceptance test needs evidence from: Trace target port WWPNs through physical switch ports and current fabric maps.
Question 326
A hypothetical FlashArray operations change concerns fibre channel target-port cabling in the Installation area. The change or incident record reports: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
- A physical link should be verified for supported speed, optics and error health after cabling.
- A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity.
- Initial local console access must use the vendor-approved method and protect privileged setup credentials.
Explanation
Correct Answer
A:SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The comparison to make is: Trace target port WWPNs through physical switch ports and current fabric maps.
Incorrect Answers
B:A physical link should be verified for supported speed, optics and error health after cabling. That is a separate switch port speed and error validation concern; it does not explain the case: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
C:A shelf added at installation must be discovered and admitted using the supported hardware procedure and inventory identity. That is a separate directflash shelf admission and identity concern; it does not explain the case: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
D:Initial local console access must use the vendor-approved method and protect privileged setup credentials. That is a separate controller initialization through approved console concern; it does not explain the case: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
Question 327
During FlashArray administration concerning fibre channel target-port cabling, an operator reviews this fictional service issue: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Trace target port WWPNs through physical switch ports and current fabric maps.
- Compare live port-link state, controller connectivity and shelf paths with the approved as-built drawing.
- Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability.
- Check shelf serial, discovered enclosure state and supported module inventory against the current installation guide.
Explanation
Correct Answer
A:A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Trace target port WWPNs through physical switch ports and current fabric maps. These observations test the rule: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
Incorrect Answers
B:Compare live port-link state, controller connectivity and shelf paths with the approved as-built drawing. Those checks address a separate post-cabling controller and shelf link verification concern, not the specific finding: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps.
C:Inspect target Purity versions, coordinator eligibility, security domains and fleet network reachability. Those checks address a separate pure fusion fleet prerequisites concern, not the specific finding: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps.
D:Check shelf serial, discovered enclosure state and supported module inventory against the current installation guide. Those checks address a separate directflash shelf admission and identity concern, not the specific finding: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps.
Question 328
A change manager requests a safe and limited FlashArray response to a Installation problem involving fibre channel target-port cabling. The reported situation is: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Correct FC patching and zoning dependencies without changing unrelated production initiators.
- Rebuild the shelf connection map using the supported sequence after a documented outage review.
- Correct any specific physical mismatch and rerun the vendor-aligned connection verification.
- Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup.
Explanation
Correct Answer
A:A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Correct FC patching and zoning dependencies without changing unrelated production initiators. Verify the change by checking: Hosts see expected target identities through each designated FC fabric.
Incorrect Answers
B:Rebuild the shelf connection map using the supported sequence after a documented outage review. That change targets a separate directflash shelf supported topology concern; the unresolved issue is: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators.
C:Correct any specific physical mismatch and rerun the vendor-aligned connection verification. That change targets a separate post-cabling controller and shelf link verification concern; the unresolved issue is: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators.
D:Rotate or disable temporary credentials and establish least-privilege named ownership after initial setup. That change targets a separate privileged local account handoff concern; the unresolved issue is: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators.
Question 329
Two independent FlashArray administrator reviewers discuss fibre channel target-port cabling. Their case record says: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Trace target port WWPNs through physical switch ports and current fabric maps.
- Check safe-lift plan, component weights, rack mounting instructions and the available lifting device.
- Compare optical module specifications, connector type, speed settings and live link diagnostics.
- Correct FC patching and zoning dependencies without changing unrelated production initiators.
- Create or correct authorized host objects and mapping after identity verification.
Explanation
Correct Answer
A:A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Trace target port WWPNs through physical switch ports and current fabric maps. These observations test the rule: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. The evidence supports this limited action: Correct FC patching and zoning dependencies without changing unrelated production initiators.
D:A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Correct FC patching and zoning dependencies without changing unrelated production initiators. Verify the change by checking: Hosts see expected target identities through each designated FC fabric. The change should follow this observation: Trace target port WWPNs through physical switch ports and current fabric maps.
Incorrect Answers
B:Check safe-lift plan, component weights, rack mounting instructions and the available lifting device. Those checks address a separate load-assisted chassis mounting concern, not the specific finding: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps. The relevant observation must instead support: Correct FC patching and zoning dependencies without changing unrelated production initiators.
C:Compare optical module specifications, connector type, speed settings and live link diagnostics. Those checks address a separate ethernet optics matching concern, not the specific finding: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The useful observations are: Trace target port WWPNs through physical switch ports and current fabric maps. The relevant observation must instead support: Correct FC patching and zoning dependencies without changing unrelated production initiators.
E:Create or correct authorized host objects and mapping after identity verification. That change targets a separate host and host-group mapping safety concern; the unresolved issue is: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators. The authorized change must instead follow: Trace target port WWPNs through physical switch ports and current fabric maps.
Question 330
An enterprise change review is deciding whether its response to fibre channel target-port cabling has been justified. The fictional case facts are: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Rack installation should use the rail set and orientation approved for the shipped chassis.
- Resolve documented prerequisite mismatches before assigning array fleet roles.
- Hosts see expected target identities through each designated FC fabric.
- The customer can authenticate with intended roles, while temporary installer credentials are no longer active.
- SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
- Correct FC patching and zoning dependencies without changing unrelated production initiators.
Explanation
Correct Answer
C:Hosts see expected target identities through each designated FC fabric. This shows whether the scoped response worked: Correct FC patching and zoning dependencies without changing unrelated production initiators. A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The result should be supported by this evidence: Trace target port WWPNs through physical switch ports and current fabric maps.
E:SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The comparison to make is: Trace target port WWPNs through physical switch ports and current fabric maps. That principle leads to a bounded response: Correct FC patching and zoning dependencies without changing unrelated production initiators.
F:A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. Correct FC patching and zoning dependencies without changing unrelated production initiators. Verify the change by checking: Hosts see expected target identities through each designated FC fabric. The action implements this principle: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
Incorrect Answers
A:Rack installation should use the rail set and orientation approved for the shipped chassis. That is a separate rail kit selection and orientation concern; it does not explain the case: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The governing distinction here is: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology. The governing rule must instead lead to: Correct FC patching and zoning dependencies without changing unrelated production initiators.
B:Resolve documented prerequisite mismatches before assigning array fleet roles. That change targets a separate pure fusion fleet prerequisites concern; the unresolved issue is: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. The scoped response is: Correct FC patching and zoning dependencies without changing unrelated production initiators. The action should implement: SAN host paths must be cabled to intended FC ports and distinct fabrics according to the approved topology.
D:The customer can authenticate with intended roles, while temporary installer credentials are no longer active. That outcome tests a separate privileged local account handoff concern, not whether the reported problem is fixed: A hospital SAN reports a target WWPN on the opposite fabric from the approved port map. A directly relevant result would be: Hosts see expected target identities through each designated FC fabric. The acceptance test needs evidence from: Trace target port WWPNs through physical switch ports and current fabric maps.