PECB ISO 9001 Lead Auditor Practice Test 49
Question 480
The audit team observes the following at a precision bearing plant: several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory What follow-up action is most defensible for the auditor?
- Order a precision bearing plant to purchase a replacement system immediately, before checking any criteria.
- End this audit trail at a precision bearing plant because someone promised the issue would be reviewed later.
- Identify the referenced gauge and trace affected acceptances to valid measurement evidence.
Explanation
Correct Answer
C:This targeted step tests measurement traceability and suitability may be uncertain through relevant records. It serves an audit-evidence function without substituting the auditor for the auditee's management.
Incorrect Answers
A:Specifying management's equipment solution without corroborating several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory would compromise the auditor's role and could misdirect correction.
B:A future promise does not establish current conformity, especially where the issue may affect incorrect acceptance of critical dimensions.
Question 481
An auditor at a precision bearing plant needs to record this condition in working papers: several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory Which note is the soundest starting point?
- Record that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory; identify the actual sample, objective source and applicable requirement before classifying.
- Write that staff at a precision bearing plant are careless and every part of the QMS is ineffective.
- Use only the phrase 'quality issue' for a precision bearing plant, without records, criteria or dates.
Explanation
Correct Answer
A:A traceable observation about a precision bearing plant allows a later reviewer to compare verifiable evidence with requirements and evaluate the potential effect on incorrect acceptance of critical dimensions.
Incorrect Answers
B:Personal blame and system-wide claims are unsupported by the isolated evidence that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory.
C:A label without the specific observed condition and evidence trail cannot support a defensible finding about incorrect acceptance of critical dimensions.
Question 482
A risk-oriented auditor is deciding how to prioritize this evidence at a precision bearing plant: several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory Which consequence is most closely related to the observed weakness?
- It means the organizational chart at a precision bearing plant must necessarily be redrawn.
- It may affect incorrect acceptance of critical dimensions.
- It automatically cancels every existing customer contract held by a precision bearing plant.
Explanation
Correct Answer
B:The condition that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory has a direct plausible connection to incorrect acceptance of critical dimensions; risk significance still requires factual confirmation.
Incorrect Answers
A:The observation concerns measurement traceability and suitability may be uncertain, not inherently the reporting diagram. A chart redesign is not the documented consequence.
C:A specific concern involving incorrect acceptance of critical dimensions is not evidence of universal contractual invalidity; consequences must be evaluated proportionately.
Question 483
For a precision bearing plant, the following condition is reported: several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory Which sample design would provide the most useful audit trail?
- Inspect an unrelated administrative process at a precision bearing plant because its records are easily accessible.
- Observe only a preselected demonstration chosen by management at a precision bearing plant, without output identifiers.
- Trace a real affected output through inspection certificates, gauge identification, verification status, and material lots, then compare the chain with applicable criteria.
Explanation
Correct Answer
C:A real trace from relevant source records to an output at a precision bearing plant directly tests the observed condition and provides reconstructable evidence about incorrect acceptance of critical dimensions.
Incorrect Answers
A:Convenience is not sufficient when the relevant control question is whether measurement traceability and suitability may be uncertain.
B:A staged demonstration alone does not adequately test the original condition that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory; selection bias weakens the inference.
Question 484
At a precision bearing plant, management claims the issue has already been fixed, yet provides no later operational records. The original observation was: several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory How should the auditor evaluate the claim?
- Request subsequent evidence from inspection certificates, gauge identification, verification status, and material lots and test whether the affected outputs now meet criteria.
- Personally redesign the controls at a precision bearing plant and certify the auditor's own solution.
- Accept the verbal claim as proof that incorrect acceptance of critical dimensions can no longer be affected.
Explanation
Correct Answer
A:Post-action source evidence can show whether the earlier concern about measurement traceability and suitability may be uncertain has been addressed in operation, rather than simply described.
Incorrect Answers
B:At a precision bearing plant, the auditor assesses the situation that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory against evidence and criteria; redesign and implementation of controls remain management responsibilities.
C:The statement does not establish effectiveness after the condition that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory.
Question 485
An audit of a precision bearing plant establishes an applicable requirement and corroborates the condition that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory How should a substantiated finding be communicated?
- Assign the most serious possible grading to a precision bearing plant regardless of the agreed classification scheme.
- Link the sampled condition to the verified criterion and supporting records, noting the possible effect on incorrect acceptance of critical dimensions.
- Omit the condition at a precision bearing plant to avoid a difficult closing conversation.
Explanation
Correct Answer
B:This preserves factual evidence, the exact requirement and a proportionate interpretation of measurement traceability and suitability may be uncertain without claiming more than the audit established.
Incorrect Answers
A:Grading must rely on the relevant rules and strength of evidence rather than on the auditor's reaction to several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory.
C:Verified departures affecting incorrect acceptance of critical dimensions must not be suppressed for convenience; any dispute can be documented and evaluated.
Question 486
At a contract electronics board assembler, rework technicians solder rejected boards but no repeat functional testing appears in the traveler. Which audit interpretation best fits the evidence currently known?
- The process is conforming because a contract electronics board assembler has been audited before.
- A major nonconformity is automatically established by the single observation at a contract electronics board assembler.
- The situation calls for testing whether rework controls may not establish that the corrected output meets original acceptance criteria.
Explanation
Correct Answer
C:At a contract electronics board assembler, the observation that rework technicians solder rejected boards but no repeat functional testing appears in the traveler raises the specific control question of whether rework controls may not establish that the corrected output meets original acceptance criteria. Additional corroboration and valid criteria are needed before grading.
Incorrect Answers
A:Prior audits do not resolve the current evidence that rework technicians solder rejected boards but no repeat functional testing appears in the traveler; test the actual process against applicable requirements.
B:The signal about latent defects in products previously designated as repaired may be significant, but scope, evidence, criteria and any scheme grading method must be established rather than assumed.
Question 487
While examining a contract electronics board assembler, an auditor finds that rework technicians solder rejected boards but no repeat functional testing appears in the traveler Which evidence collection most directly tests the relevant issue?
- Correlate rework instructions, traveler history, retest logs, and final acceptance evidence with relevant sampled outputs and requirements.
- Read only the generic quality-policy statement for a contract electronics board assembler, without examining transaction records.
- Rely only on the process owner's assurance about a contract electronics board assembler without checking source data.
Explanation
Correct Answer
A:These specific sources at a contract electronics board assembler enable the auditor to investigate whether rework controls may not establish that the corrected output meets original acceptance criteria and to test facts against criteria.
Incorrect Answers
B:A policy statement cannot by itself verify the observed condition that rework technicians solder rejected boards but no repeat functional testing appears in the traveler.
C:An assurance is a lead, not objective corroboration of the particular issue affecting latent defects in products previously designated as repaired.
Question 488
The audit team observes the following at a contract electronics board assembler: rework technicians solder rejected boards but no repeat functional testing appears in the traveler What follow-up action is most defensible for the auditor?
- End this audit trail at a contract electronics board assembler because someone promised the issue would be reviewed later.
- Sample reworked boards and check the approved verification pathway before release.
- Order a contract electronics board assembler to purchase a replacement system immediately, before checking any criteria.
Explanation
Correct Answer
B:This targeted step tests rework controls may not establish that the corrected output meets original acceptance criteria through relevant records. It serves an audit-evidence function without substituting the auditor for the auditee's management.
Incorrect Answers
A:A future promise does not establish current conformity, especially where the issue may affect latent defects in products previously designated as repaired.
C:Specifying management's equipment solution without corroborating rework technicians solder rejected boards but no repeat functional testing appears in the traveler would compromise the auditor's role and could misdirect correction.
Question 489
An auditor at a contract electronics board assembler needs to record this condition in working papers: rework technicians solder rejected boards but no repeat functional testing appears in the traveler Which note is the soundest starting point?
- Use only the phrase 'quality issue' for a contract electronics board assembler, without records, criteria or dates.
- Write that staff at a contract electronics board assembler are careless and every part of the QMS is ineffective.
- Record that rework technicians solder rejected boards but no repeat functional testing appears in the traveler; identify the actual sample, objective source and applicable requirement before classifying.
Explanation
Correct Answer
C:A traceable observation about a contract electronics board assembler allows a later reviewer to compare verifiable evidence with requirements and evaluate the potential effect on latent defects in products previously designated as repaired.
Incorrect Answers
A:A label without the specific observed condition and evidence trail cannot support a defensible finding about latent defects in products previously designated as repaired.
B:Personal blame and system-wide claims are unsupported by the isolated evidence that rework technicians solder rejected boards but no repeat functional testing appears in the traveler.
Question 490
A risk-oriented auditor is deciding how to prioritize this evidence at a contract electronics board assembler: rework technicians solder rejected boards but no repeat functional testing appears in the traveler Which consequence is most closely related to the observed weakness?
- It may affect latent defects in products previously designated as repaired.
- It means the organizational chart at a contract electronics board assembler must necessarily be redrawn.
- It automatically cancels every existing customer contract held by a contract electronics board assembler.
Explanation
Correct Answer
A:The condition that rework technicians solder rejected boards but no repeat functional testing appears in the traveler has a direct plausible connection to latent defects in products previously designated as repaired; risk significance still requires factual confirmation.
Incorrect Answers
B:The observation concerns rework controls may not establish that the corrected output meets original acceptance criteria, not inherently the reporting diagram. A chart redesign is not the documented consequence.
C:A specific concern involving latent defects in products previously designated as repaired is not evidence of universal contractual invalidity; consequences must be evaluated proportionately.