PECB ISO 9001 Lead Auditor Practice Test 48
Question 470
At a beverage bottling facility, an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete. Which audit interpretation best fits the evidence currently known?
- The process is conforming because a beverage bottling facility has been audited before.
- The situation calls for testing whether documented inspection entries may not reflect actual process execution.
- A major nonconformity is automatically established by the single observation at a beverage bottling facility.
Explanation
Correct Answer
B:At a beverage bottling facility, the observation that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete raises the specific control question of whether documented inspection entries may not reflect actual process execution. Additional corroboration and valid criteria are needed before grading.
Incorrect Answers
A:Prior audits do not resolve the current evidence that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete; test the actual process against applicable requirements.
C:The signal about escape of poorly sealed products despite apparently complete records may be significant, but scope, evidence, criteria and any scheme grading method must be established rather than assumed.
Question 471
While examining a beverage bottling facility, an auditor finds that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete Which evidence collection most directly tests the relevant issue?
- Read only the generic quality-policy statement for a beverage bottling facility, without examining transaction records.
- Rely only on the process owner's assurance about a beverage bottling facility without checking source data.
- Correlate machine downtime data, cap-torque records, operator interviews, and sampled packs with relevant sampled outputs and requirements.
Explanation
Correct Answer
C:These specific sources at a beverage bottling facility enable the auditor to investigate whether documented inspection entries may not reflect actual process execution and to test facts against criteria.
Incorrect Answers
A:A policy statement cannot by itself verify the observed condition that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete.
B:An assurance is a lead, not objective corroboration of the particular issue affecting escape of poorly sealed products despite apparently complete records.
Question 472
The audit team observes the following at a beverage bottling facility: an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete What follow-up action is most defensible for the auditor?
- Compare timing of recorded checks with the stop history and available physical evidence.
- Order a beverage bottling facility to purchase a replacement system immediately, before checking any criteria.
- End this audit trail at a beverage bottling facility because someone promised the issue would be reviewed later.
Explanation
Correct Answer
A:This targeted step tests documented inspection entries may not reflect actual process execution through relevant records. It serves an audit-evidence function without substituting the auditor for the auditee's management.
Incorrect Answers
B:Specifying management's equipment solution without corroborating an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete would compromise the auditor's role and could misdirect correction.
C:A future promise does not establish current conformity, especially where the issue may affect escape of poorly sealed products despite apparently complete records.
Question 473
An auditor at a beverage bottling facility needs to record this condition in working papers: an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete Which note is the soundest starting point?
- Use only the phrase 'quality issue' for a beverage bottling facility, without records, criteria or dates.
- Record that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete; identify the actual sample, objective source and applicable requirement before classifying.
- Write that staff at a beverage bottling facility are careless and every part of the QMS is ineffective.
Explanation
Correct Answer
B:A traceable observation about a beverage bottling facility allows a later reviewer to compare verifiable evidence with requirements and evaluate the potential effect on escape of poorly sealed products despite apparently complete records.
Incorrect Answers
A:A label without the specific observed condition and evidence trail cannot support a defensible finding about escape of poorly sealed products despite apparently complete records.
C:Personal blame and system-wide claims are unsupported by the isolated evidence that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete.
Question 474
A risk-oriented auditor is deciding how to prioritize this evidence at a beverage bottling facility: an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete Which consequence is most closely related to the observed weakness?
- It automatically cancels every existing customer contract held by a beverage bottling facility.
- It means the organizational chart at a beverage bottling facility must necessarily be redrawn.
- It may affect escape of poorly sealed products despite apparently complete records.
Explanation
Correct Answer
C:The condition that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete has a direct plausible connection to escape of poorly sealed products despite apparently complete records; risk significance still requires factual confirmation.
Incorrect Answers
A:A specific concern involving escape of poorly sealed products despite apparently complete records is not evidence of universal contractual invalidity; consequences must be evaluated proportionately.
B:The observation concerns documented inspection entries may not reflect actual process execution, not inherently the reporting diagram. A chart redesign is not the documented consequence.
Question 475
For a beverage bottling facility, the following condition is reported: an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete Which sample design would provide the most useful audit trail?
- Trace a real affected output through machine downtime data, cap-torque records, operator interviews, and sampled packs, then compare the chain with applicable criteria.
- Observe only a preselected demonstration chosen by management at a beverage bottling facility, without output identifiers.
- Inspect an unrelated administrative process at a beverage bottling facility because its records are easily accessible.
Explanation
Correct Answer
A:A real trace from relevant source records to an output at a beverage bottling facility directly tests the observed condition and provides reconstructable evidence about escape of poorly sealed products despite apparently complete records.
Incorrect Answers
B:A staged demonstration alone does not adequately test the original condition that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete; selection bias weakens the inference.
C:Convenience is not sufficient when the relevant control question is whether documented inspection entries may not reflect actual process execution.
Question 476
At a beverage bottling facility, management claims the issue has already been fixed, yet provides no later operational records. The original observation was: an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete How should the auditor evaluate the claim?
- Accept the verbal claim as proof that escape of poorly sealed products despite apparently complete records can no longer be affected.
- Request subsequent evidence from machine downtime data, cap-torque records, operator interviews, and sampled packs and test whether the affected outputs now meet criteria.
- Personally redesign the controls at a beverage bottling facility and certify the auditor's own solution.
Explanation
Correct Answer
B:Post-action source evidence can show whether the earlier concern about documented inspection entries may not reflect actual process execution has been addressed in operation, rather than simply described.
Incorrect Answers
A:The statement does not establish effectiveness after the condition that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete.
C:At a beverage bottling facility, the auditor assesses the situation that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete against evidence and criteria; redesign and implementation of controls remain management responsibilities.
Question 477
An audit of a beverage bottling facility establishes an applicable requirement and corroborates the condition that an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete How should a substantiated finding be communicated?
- Assign the most serious possible grading to a beverage bottling facility regardless of the agreed classification scheme.
- Omit the condition at a beverage bottling facility to avoid a difficult closing conversation.
- Link the sampled condition to the verified criterion and supporting records, noting the possible effect on escape of poorly sealed products despite apparently complete records.
Explanation
Correct Answer
C:This preserves factual evidence, the exact requirement and a proportionate interpretation of documented inspection entries may not reflect actual process execution without claiming more than the audit established.
Incorrect Answers
A:Grading must rely on the relevant rules and strength of evidence rather than on the auditor's reaction to an operator bypasses a cap-torque check after a line stoppage while the production log records every check as complete.
B:Verified departures affecting escape of poorly sealed products despite apparently complete records must not be suppressed for convenience; any dispute can be documented and evaluated.
Question 478
At a precision bearing plant, several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory. Which audit interpretation best fits the evidence currently known?
- The situation calls for testing whether measurement traceability and suitability may be uncertain.
- A major nonconformity is automatically established by the single observation at a precision bearing plant.
- The process is conforming because a precision bearing plant has been audited before.
Explanation
Correct Answer
A:At a precision bearing plant, the observation that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory raises the specific control question of whether measurement traceability and suitability may be uncertain. Additional corroboration and valid criteria are needed before grading.
Incorrect Answers
B:The signal about incorrect acceptance of critical dimensions may be significant, but scope, evidence, criteria and any scheme grading method must be established rather than assumed.
C:Prior audits do not resolve the current evidence that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory; test the actual process against applicable requirements.
Question 479
While examining a precision bearing plant, an auditor finds that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory Which evidence collection most directly tests the relevant issue?
- Rely only on the process owner's assurance about a precision bearing plant without checking source data.
- Correlate inspection certificates, gauge identification, verification status, and material lots with relevant sampled outputs and requirements.
- Read only the generic quality-policy statement for a precision bearing plant, without examining transaction records.
Explanation
Correct Answer
B:These specific sources at a precision bearing plant enable the auditor to investigate whether measurement traceability and suitability may be uncertain and to test facts against criteria.
Incorrect Answers
A:An assurance is a lead, not objective corroboration of the particular issue affecting incorrect acceptance of critical dimensions.
C:A policy statement cannot by itself verify the observed condition that several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory.
Question 480
The audit team observes the following at a precision bearing plant: several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory What follow-up action is most defensible for the auditor?
- Order a precision bearing plant to purchase a replacement system immediately, before checking any criteria.
- End this audit trail at a precision bearing plant because someone promised the issue would be reviewed later.
- Identify the referenced gauge and trace affected acceptances to valid measurement evidence.
Explanation
Correct Answer
C:This targeted step tests measurement traceability and suitability may be uncertain through relevant records. It serves an audit-evidence function without substituting the auditor for the auditee's management.
Incorrect Answers
A:Specifying management's equipment solution without corroborating several inspection certificates cite the same micrometer even though its serial number is absent from the approved gauge inventory would compromise the auditor's role and could misdirect correction.
B:A future promise does not establish current conformity, especially where the issue may affect incorrect acceptance of critical dimensions.