Microsoft SC-300 Practice Test 25
Question 240
An application requires a certain MFA type but a basic SMS OTP was accepted. What should change?
- Use a supported user action target for Register security information.
- Replace generic Require MFA with the appropriate authentication strength.
- Set persistent browser session behavior according to policy.
- Require an approved Terms of Use as a grant control.
Explanation
Correct Answer
B:Restrictive strengths control which authentication combinations satisfy the grant. This matters here because an application requires a certain MFA type but a basic SMS OTP was accepted.
Incorrect Answers
A:Conditional Access can require controls during specified user actions, not only app access.
C:Browser session persistence can be restricted independently of MFA grants. This matters here because an application requires a certain MFA type but a basic SMS OTP was accepted.
D:Terms of Use acceptance can be enforced as part of a Conditional Access grant. This matters here because an application requires a certain MFA type but a basic SMS OTP was accepted.
Question 241
A report-only CA policy shows all grant controls satisfied but the tenant needs enforcement. What next step is appropriate?
- Use a supported user action target for Register security information.
- Use continuous access evaluation on supported Microsoft resources.
- Change the validated policy state to On after staged testing.
- Require phishing-resistant authentication strength.
Explanation
Correct Answer
C:Report-only evaluates applicability without enforcing the planned controls. This matters here because a report-only CA policy shows all grant controls satisfied but the tenant needs enforcement. What next step is….
Incorrect Answers
A:Conditional Access can require controls during specified user actions, not only app access. This matters here because a report-only CA policy shows all grant controls satisfied but the tenant needs enforcement. What next step is….
B:CAE allows participating resources to react to critical identity events before normal token expiry.
D:Authentication strengths distinguish qualifying method combinations rather than treating all MFA as equivalent. This matters here because a report-only CA policy shows all grant controls satisfied but the tenant needs enforcement. What next step is….
Question 242
A device has stale compliance data and the policy denies it despite healthy sign-in. What should be investigated?
- Require the device to be marked compliant.
- Inspect the claims challenge and matching Conditional Access policy requirements.
- Check the compliance signal and device association used by the grant.
- Require an approved Terms of Use as a grant control.
Explanation
Correct Answer
C:Policy evaluation relies on registered compliance claims rather than local assumptions.
Incorrect Answers
A:The compliant-device control evaluates device compliance state from supported management. This matters here because a device has stale compliance data and the policy denies it despite healthy sign-in.
B:Protected action enforcement depends on the challenge and configured strength.
D:Terms of Use acceptance can be enforced as part of a Conditional Access grant. Policy evaluation relies on registered compliance claims rather than local assumptions.
Question 243
A CA policy targets registration of security information rather than a cloud app resource. What selection is relevant?
- Change the validated policy state to On after staged testing.
- Use authentication context as a specialized target together with normal policy controls.
- Use a supported user action target for Register security information.
- Require an approved Terms of Use as a grant control.
Explanation
Correct Answer
C:Conditional Access can require controls during specified user actions, not only app access. This matters here because a CA policy targets registration of security information rather than a cloud app resource. What selection is relevant.
Incorrect Answers
A:Report-only evaluates applicability without enforcing the planned controls. This matters here because a CA policy targets registration of security information rather than a cloud app resource. What selection is relevant.
B:Authentication context narrows resource-specific enforcement but does not eliminate policy design.
D:Terms of Use acceptance can be enforced as part of a Conditional Access grant. Conditional Access can require controls during specified user actions, not only app access.
Question 244
A helpdesk operator wants to predict CA policy application to a specific user, app, platform and location. Which tool fits?
- Use Conditional Access What If with the correct sign-in context.
- Re-run What If with the actual target resource.
- Use application-enforced restrictions or Defender for Cloud Apps session controls.
- Analyze impact and adjust assignments before moving the policy On.
Explanation
Correct Answer
A:What If evaluates selected conditions and reports applicable and excluded policies.
Incorrect Answers
B:The target resource is a required input for realistic Conditional Access evaluation.
C:Session restrictions allow some access while limiting high-risk operations. This matters here because a helpdesk operator wants to predict CA policy application to a specific user, app, platform and location. Which….
D:Report-only provides a chance to fix adverse effects prior to enforcement.
Question 245
An organization wants to test new MFA enforcement before users experience prompts. Which policy state fits?
- Use application-enforced restrictions or Defender for Cloud Apps session controls.
- Inspect inclusion/exclusion, conditions and app targeting for that sign-in.
- Analyze impact and adjust assignments before moving the policy On.
- Set the new Conditional Access policy to Report-only.
Explanation
Correct Answer
D:Report-only records predicted application without generally enforcing grant requirements.
Incorrect Answers
A:Session restrictions allow some access while limiting high-risk operations. This matters here because an organization wants to test new MFA enforcement before users experience prompts. Which policy state fits.
B:A configured policy may not match the specific authentication context.
C:Report-only provides a chance to fix adverse effects prior to enforcement. This matters here because an organization wants to test new MFA enforcement before users experience prompts. Which policy state fits.
Question 246
A user reports blocked access, but What If suggests the policy won't apply. Which evidence takes precedence for the real event?
- Review the tool's nonapplicable policies and first failed condition.
- Use continuous access evaluation on supported Microsoft resources.
- Validate the platform detection and applicable client behavior.
- Inspect the actual sign-in logs and Conditional Access tab.
Explanation
Correct Answer
D:Actual sign-in details include the observed conditions that may differ from a simulation.
Incorrect Answers
A:What If explains why policy targeting or conditions did not match.
B:CAE allows participating resources to react to critical identity events before normal token expiry. Actual sign-in details include the observed conditions that may differ from a simulation.
C:Platform conditions depend on device signals and may not always reflect assumed local OS identity. Actual sign-in details include the observed conditions that may differ from a simulation.
Question 247
A rule is listed as not applied in What If. How can the admin find the reason?
- Review the tool's nonapplicable policies and first failed condition.
- Check authentication protocol support and actual session control enforcement.
- Use Conditional Access What If with the correct sign-in context.
- Select the correct client app and device platform inputs.
Explanation
Correct Answer
A:What If explains why policy targeting or conditions did not match. This matters here because a rule is listed as not applied in What If. How can the admin find the reason.
Incorrect Answers
B:Session policies are not universally honored by unsupported client types.
C:What If evaluates selected conditions and reports applicable and excluded policies. This matters here because a rule is listed as not applied in What If. How can the admin find the reason.
D:Client and platform context affect which Conditional Access policies apply.
Question 248
A mobile app sign-in behaves differently from a browser sign-in in simulation. What parameter must be accurate?
- Select the correct client app and device platform inputs.
- Inspect the actual sign-in logs and Conditional Access tab.
- Use Conditional Access What If with the correct sign-in context.
- Require the device to be marked compliant.
Explanation
Correct Answer
A:Client and platform context affect which Conditional Access policies apply. This matters here because a mobile app sign-in behaves differently from a browser sign-in in simulation. What parameter must be accurate.
Incorrect Answers
B:Actual sign-in details include the observed conditions that may differ from a simulation. This matters here because a mobile app sign-in behaves differently from a browser sign-in in simulation. What parameter must be accurate.
C:What If evaluates selected conditions and reports applicable and excluded policies. This matters here because a mobile app sign-in behaves differently from a browser sign-in in simulation. What parameter must be accurate.
D:The compliant-device control evaluates device compliance state from supported management. This matters here because a mobile app sign-in behaves differently from a browser sign-in in simulation. What parameter must be accurate.
Question 249
An admin tests a policy but forgets to include the resource application. Why is the simulation unreliable?
- Select Use Conditional Access App Control.
- Review the tool's nonapplicable policies and first failed condition.
- Inspect the actual sign-in logs and Conditional Access tab.
- Re-run What If with the actual target resource.
Explanation
Correct Answer
D:The target resource is a required input for realistic Conditional Access evaluation. This matters here because an admin tests a policy but forgets to include the resource application. Why is the simulation unreliable.
Incorrect Answers
A:This control integrates eligible sessions with Defender for Cloud Apps for real-time restrictions. The target resource is a required input for realistic Conditional Access evaluation.
B:What If explains why policy targeting or conditions did not match. This matters here because an admin tests a policy but forgets to include the resource application. Why is the simulation unreliable.
C:Actual sign-in details include the observed conditions that may differ from a simulation. The target resource is a required input for realistic Conditional Access evaluation.
Question 250
A broad policy produces unexpected report-only failures for a pilot. What release strategy fits?
- Re-run What If with the actual target resource.
- Configure sign-in frequency and nonpersistent browser session behavior.
- Analyze impact and adjust assignments before moving the policy On.
- Inspect the actual sign-in logs and Conditional Access tab.
Explanation
Correct Answer
C:Report-only provides a chance to fix adverse effects prior to enforcement. This matters here because a broad policy produces unexpected report-only failures for a pilot. What release strategy fits.
Incorrect Answers
A:The target resource is a required input for realistic Conditional Access evaluation. This matters here because a broad policy produces unexpected report-only failures for a pilot. What release strategy fits.
B:Short reauthentication intervals plus nonpersistent browser sessions help limit kiosk exposure. This matters here because a broad policy produces unexpected report-only failures for a pilot. What release strategy fits.
D:Actual sign-in details include the observed conditions that may differ from a simulation. This matters here because a broad policy produces unexpected report-only failures for a pilot. What release strategy fits.