Microsoft SC-200 Practice Test 33
Question 320
A detection engineer must verify consistent timestamps and schema after Logs Ingestion API onboarding. After the initial control is implemented, the partner begins sending timestamps in another time zone. What is the best follow-up action?
- Validate custom table DCR transformations, required fields, and ingestion timestamps
- A message trace and remediation action show affected mailboxes were addressed
- Treat mismatched timestamp strings as reliable datetimes without checking mapping
- Normalize offsets in the transform before revalidating the detection query
Explanation
Correct Answer
D:Correct follow-up. The requirement changed to: The partner begins sending timestamps in another time zone. Therefore Normalize offsets in the transform before revalidating the detection query is appropriate for A detection engineer must verify consistent timestamps and schema after Logs Ingestion API onboarding, in addition to the previous measure.
Incorrect Answers
A:This was the original control already implemented: Validate custom table DCR transformations, required fields, and ingestion timestamps. Its original rationale was: Custom log usability depends on data types, transformations, and authorized ingestion configuration. For the initial setting (A detection engineer must verify consistent timestamps and schema after Logs Ingestion API onboarding), that does not itself meet the new condition: The partner begins sending timestamps in another time zone.
B:An observation is not the additional configuration or response action requested. The change is The partner begins sending timestamps in another time zone, so the proper follow-up must address it rather than merely note A message trace and remediation action show affected mailboxes were addressed.
C:This was already unsuitable under the original condition because incorrect types can undermine time filters and analytics rules. It also fails after the change affecting A detection engineer must verify consistent timestamps and schema after Logs Ingestion API onboarding.
Question 321
A SOC has already written an advanced hunting query for a new malware pattern. Which action BEST addresses this Microsoft security operations requirement?
- Investigate Defender for Cloud Apps activity and apply supported app or session controls
- Create a Defender XDR custom detection rule from a valid advanced hunting query
- Refine query conditions and test again before resuming enforcement
- Save the query in a personal notebook and assume it alerts without a detection rule
Explanation
Correct Answer
B:A custom detection converts supported hunting results into governed alert or response logic. The selected action is: Create a Defender XDR custom detection rule from a valid advanced hunting query.
Incorrect Answers
A:That action serves a separate case (A SaaS security policy flags mass downloads from an unusual user session) in the Respond to security incidents domain. It does not specifically address the initial case.
C:This action would become suitable if a later condition arose: The detection creates false positives from approved maintenance tools. It is not the immediate answer to A SOC has already written an advanced hunting query for a new malware pattern.
D:A manually saved hunting query does not automatically run as a detection. The shortcut Save the query in a personal notebook and assume it alerts without a detection rule does not resolve the case involving A SOC has already written an advanced hunting query for a new malware pattern.
Question 322
A SOC has already written an advanced hunting query for a new malware pattern. A colleague suggests: Save the query in a personal notebook and assume it alerts without a detection rule. What is the MOST important technical defect in this suggestion?
- MFA does not rule out session hijacking or misuse of authorized access
- A manually saved hunting query does not automatically run as a detection
- A custom detection converts supported hunting results into governed alert or response logic
- A familiar product name alone establishes that the proposal is safe.
Explanation
Correct Answer
B:A manually saved hunting query does not automatically run as a detection. This directly explains the defect in Save the query in a personal notebook and assume it alerts without a detection rule for A SOC has already written an advanced hunting query for a new malware pattern.
Incorrect Answers
A:That concern applies to another security scenario (A SaaS security policy flags mass downloads from an unusual user session). Here, A SOC has already written an advanced hunting query for a new malware pattern, the specified proposal fails because a manually saved hunting query does not automatically run as a detection.
C:This describes the reason for the preferred control, Create a Defender XDR custom detection rule from a valid advanced hunting query: A custom detection converts supported hunting results into governed alert or response logic. It is not the direct defect in the proposed shortcut for A SOC has already written an advanced hunting query for a new malware pattern.
D:Product-name familiarity cannot validate a proposed security action. For A SOC has already written an advanced hunting query for a new malware pattern, the actual issue is that a manually saved hunting query does not automatically run as a detection.
Question 323
A SOC has already written an advanced hunting query for a new malware pattern. After implementing Create a Defender XDR custom detection rule from a valid advanced hunting query, what result would BEST establish that it worked?
- The team schedules a future check of whether controlled matching telemetry produces the intended custom detection alert, without recording any observed result.
- The suspicious activity is correlated with user and application session details
- Controlled matching telemetry produces the intended custom detection alert
- The SOC approves Create a Defender XDR custom detection rule from a valid advanced hunting query on paper but has not tested its operation.
Explanation
Correct Answer
C:Correct observed evidence. Controlled matching telemetry produces the intended custom detection alert. Given the original requirement, that result would substantiate the selected action, Create a Defender XDR custom detection rule from a valid advanced hunting query.
Incorrect Answers
A:A future validation plan is not an observed result. The actual verification should establish that controlled matching telemetry produces the intended custom detection alert, in the scenario involving A SOC has already written an advanced hunting query for a new malware pattern.
B:This observation fits another setting (A SaaS security policy flags mass downloads from an unusual user session). It does not verify Create a Defender XDR custom detection rule from a valid advanced hunting query against the original need.
D:Approval records intent but not actual protection or investigation. For A SOC has already written an advanced hunting query for a new malware pattern, an operational outcome must demonstrate that controlled matching telemetry produces the intended custom detection alert.
Question 324
A SOC has already written an advanced hunting query for a new malware pattern. The original measure is in place. A new requirement arises: The detection creates false positives from approved maintenance tools. Which ADDITIONAL action BEST fits?
- Create a Defender XDR custom detection rule from a valid advanced hunting query
- Save the query in a personal notebook and assume it alerts without a detection rule
- Refine query conditions and test again before resuming enforcement
- Controlled matching telemetry produces the intended custom detection alert
Explanation
Correct Answer
C:Correct follow-up. The requirement changed to: The detection creates false positives from approved maintenance tools. Therefore Refine query conditions and test again before resuming enforcement is appropriate for A SOC has already written an advanced hunting query for a new malware pattern, in addition to the previous measure.
Incorrect Answers
A:This was the original control already implemented: Create a Defender XDR custom detection rule from a valid advanced hunting query. Its original rationale was: A custom detection converts supported hunting results into governed alert or response logic. For the initial setting (A SOC has already written an advanced hunting query for a new malware pattern), that does not itself meet the new condition: The detection creates false positives from approved maintenance tools.
B:This was already unsuitable under the original condition because a manually saved hunting query does not automatically run as a detection. It also fails after the change affecting A SOC has already written an advanced hunting query for a new malware pattern.
D:An observation is not the additional configuration or response action requested. The change is The detection creates false positives from approved maintenance tools, so the proper follow-up must address it rather than merely note Controlled matching telemetry produces the intended custom detection alert.
Question 325
A security operations analyst must handle this situation: A Defender engineer needs that query to alert automatically on matching endpoint events. What is the BEST initial response?
- Refine query conditions and test again before resuming enforcement
- Create a Defender XDR custom detection rule from a valid advanced hunting query
- Save the query in a personal notebook and assume it alerts without a detection rule
- Correlate evidence using entities, indicators and event times with appropriate tolerance
Explanation
Correct Answer
B:A custom detection converts supported hunting results into governed alert or response logic. The selected action is: Create a Defender XDR custom detection rule from a valid advanced hunting query.
Incorrect Answers
A:This action would become suitable if a later condition arose: The detection creates false positives from approved maintenance tools. It is not the immediate answer to A Defender engineer needs that query to alert automatically on matching endpoint events.
C:A manually saved hunting query does not automatically run as a detection. The shortcut Save the query in a personal notebook and assume it alerts without a detection rule does not resolve the case involving A Defender engineer needs that query to alert automatically on matching endpoint events.
D:That action serves a separate case (A phishing alert and Endpoint malware alert share an indicator but not a timestamp) in the Respond to security incidents domain. It does not specifically address the initial case.
Question 326
A Defender engineer needs that query to alert automatically on matching endpoint events. Why should the SOC reject the proposed shortcut: Save the query in a personal notebook and assume it alerts without a detection rule?
- A manually saved hunting query does not automatically run as a detection
- A custom detection converts supported hunting results into governed alert or response logic
- Shared cloud or NAT addresses can yield unrelated activity
- A familiar product name alone establishes that the proposal is safe.
Explanation
Correct Answer
A:A manually saved hunting query does not automatically run as a detection. This directly explains the defect in Save the query in a personal notebook and assume it alerts without a detection rule for A Defender engineer needs that query to alert automatically on matching endpoint events.
Incorrect Answers
B:This describes the reason for the preferred control, Create a Defender XDR custom detection rule from a valid advanced hunting query: A custom detection converts supported hunting results into governed alert or response logic. It is not the direct defect in the proposed shortcut for A Defender engineer needs that query to alert automatically on matching endpoint events.
C:That concern applies to another security scenario (A phishing alert and Endpoint malware alert share an indicator but not a timestamp). Here, A Defender engineer needs that query to alert automatically on matching endpoint events, the specified proposal fails because a manually saved hunting query does not automatically run as a detection.
D:Product-name familiarity cannot validate a proposed security action. For A Defender engineer needs that query to alert automatically on matching endpoint events, the actual issue is that a manually saved hunting query does not automatically run as a detection.
Question 327
A Defender engineer needs that query to alert automatically on matching endpoint events. The SOC implements Create a Defender XDR custom detection rule from a valid advanced hunting query. Which observed result provides credible confirmation?
- Controlled matching telemetry produces the intended custom detection alert
- The investigator documents corroborating account or device ties before merging
- The team schedules a future check of whether controlled matching telemetry produces the intended custom detection alert, without recording any observed result.
- The SOC approves Create a Defender XDR custom detection rule from a valid advanced hunting query on paper but has not tested its operation.
Explanation
Correct Answer
A:Correct observed evidence. Controlled matching telemetry produces the intended custom detection alert. Given the original requirement, that result would substantiate the selected action, Create a Defender XDR custom detection rule from a valid advanced hunting query.
Incorrect Answers
B:This observation fits another setting (A phishing alert and Endpoint malware alert share an indicator but not a timestamp). It does not verify Create a Defender XDR custom detection rule from a valid advanced hunting query against the original need.
C:A future validation plan is not an observed result. The actual verification should establish that controlled matching telemetry produces the intended custom detection alert, in the scenario involving A Defender engineer needs that query to alert automatically on matching endpoint events.
D:Approval records intent but not actual protection or investigation. For A Defender engineer needs that query to alert automatically on matching endpoint events, an operational outcome must demonstrate that controlled matching telemetry produces the intended custom detection alert.
Question 328
The original problem was: A Defender engineer needs that query to alert automatically on matching endpoint events. The solution is operating, but the detection creates false positives from approved maintenance tools. What should change next?
- Refine query conditions and test again before resuming enforcement
- Save the query in a personal notebook and assume it alerts without a detection rule
- The investigator documents corroborating account or device ties before merging
- Create a Defender XDR custom detection rule from a valid advanced hunting query
Explanation
Correct Answer
A:Correct follow-up. The requirement changed to: The detection creates false positives from approved maintenance tools. Therefore Refine query conditions and test again before resuming enforcement is appropriate for A Defender engineer needs that query to alert automatically on matching endpoint events, in addition to the previous measure.
Incorrect Answers
B:This was already unsuitable under the original condition because a manually saved hunting query does not automatically run as a detection. It also fails after the change affecting A Defender engineer needs that query to alert automatically on matching endpoint events.
C:An observation is not the additional configuration or response action requested. The change is The detection creates false positives from approved maintenance tools, so the proper follow-up must address it rather than merely note The investigator documents corroborating account or device ties before merging.
D:This was the original control already implemented: Create a Defender XDR custom detection rule from a valid advanced hunting query. Its original rationale was: A custom detection converts supported hunting results into governed alert or response logic. For the initial setting (A Defender engineer needs that query to alert automatically on matching endpoint events), that does not itself meet the new condition: The detection creates false positives from approved maintenance tools.
Question 329
A Defender custom detection returns no records after a schema change. Which configuration or investigation step is MOST appropriate?
- Update and test the query against current advanced hunting schema before saving the detection
- Lower the incident severity while leaving the invalid query unchanged
- Use supported Defender for Endpoint isolate device action with authorized incident approval
- Extend the rule only after validating the newly relevant table and join keys
Explanation
Correct Answer
A:Custom detection rules depend on valid tables, columns, and compatible event time filtering. The selected action is: Update and test the query against current advanced hunting schema before saving the detection.
Incorrect Answers
B:Severity changes do not correct a broken KQL schema reference. The shortcut Lower the incident severity while leaving the invalid query unchanged does not resolve the case involving A Defender custom detection returns no records after a schema change.
C:That action serves a separate case (A confirmed compromised laptop must be contained while preserving essential Defender management communication) in the Respond to security incidents domain. It does not specifically address the initial case.
D:This action would become suitable if a later condition arose: A new Defender workload starts producing related events. It is not the immediate answer to A Defender custom detection returns no records after a schema change.
Question 330
A Defender custom detection returns no records after a schema change. Which statement BEST explains why the proposed approach (Lower the incident severity while leaving the invalid query unchanged) fails?
- Disabling protection undermines monitoring and is not the supported isolation operation
- Custom detection rules depend on valid tables, columns, and compatible event time filtering
- A familiar product name alone establishes that the proposal is safe.
- Severity changes do not correct a broken KQL schema reference
Explanation
Correct Answer
D:Severity changes do not correct a broken KQL schema reference. This directly explains the defect in Lower the incident severity while leaving the invalid query unchanged for A Defender custom detection returns no records after a schema change.
Incorrect Answers
A:That concern applies to another security scenario (A confirmed compromised laptop must be contained while preserving essential Defender management communication). Here, A Defender custom detection returns no records after a schema change, the specified proposal fails because severity changes do not correct a broken KQL schema reference.
B:This describes the reason for the preferred control, Update and test the query against current advanced hunting schema before saving the detection: Custom detection rules depend on valid tables, columns, and compatible event time filtering. It is not the direct defect in the proposed shortcut for A Defender custom detection returns no records after a schema change.
C:Product-name familiarity cannot validate a proposed security action. For A Defender custom detection returns no records after a schema change, the actual issue is that severity changes do not correct a broken KQL schema reference.