cert
cert-1
cert-2

Pass Juniper JN0-664 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
JN0-664 Exam - Verified By Experts
JN0-664 Premium File

JN0-664 Premium File

$69.99
$76.99
  • Premium File 96 Questions & Answers. Last Update: Nov 19, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 20 downloads in the last 7 days
block-screenshots
Juniper JN0-664 Practice Test 50

Question 490

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. Two tenants reuse an identical MAC value in isolated EVPN instances, and the operator needs to verify route-target and EVI context rather than collapse both domains. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Create two circuits with different VC identifiers and assume LDP can automatically infer they belong to the same customer service because the physical ports are Up.
  2. Assume every pair of routers on a broadcast VLAN must display Full adjacency, and bounce the elected DR whenever another router is only Two-Way.
  3. Assume an Established IPv4-unicast-only BGP session automatically distributes BGP Layer 2 VPN NLRI and labels to every PE.
  4. Assume every MAC learned on an EVPN remote PE must be discovered exclusively by data-plane flood without any BGP MAC/IP advertisement.

Explanation

Correct Answer

D:

Apply instead: Use BGP EVPN MAC/IP reachability information to explain how remote PE devices learn and advertise Ethernet endpoints without relying only on flooding.

Incorrect Answers

A:

This alternative proposes: Create two circuits with different VC identifiers and assume LDP can automatically infer they belong to the same customer service because the physical ports are Up. It concerns a different Junos engineering issue LDP signaled Layer 2 circuit pseudowire status and VC identifiers, not the directly tested provider-network issue EVPN MAC IP route type two control plane and learning.

B:

This alternative proposes: Assume every pair of routers on a broadcast VLAN must display Full adjacency, and bounce the elected DR whenever another router is only Two-Way. It concerns a different Junos engineering issue OSPF designated router election on a multiaccess segment, not the directly tested provider-network issue EVPN MAC IP route type two control plane and learning.

C:

This alternative proposes: Assume an Established IPv4-unicast-only BGP session automatically distributes BGP Layer 2 VPN NLRI and labels to every PE. It concerns a different Junos engineering issue BGP-signaled Layer 2 VPN NLRI and route target import, not the directly tested provider-network issue EVPN MAC IP route type two control plane and learning.

Question 491

A Junos service-provider routing engineer investigates the following routing and service incident: A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Verify the recursive resolution of a BGP NEXT_HOP before changing route selection preferences or assuming a received prefix is usable.
  2. Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.
  3. Use BGP EVPN MAC/IP reachability information to explain how remote PE devices learn and advertise Ethernet endpoints without relying only on flooding.
  4. Validate BGP Layer 2 VPN service discovery through negotiated signaling families, route distinguishers/targets and customer connection mappings.

Explanation

Correct Answer

B:

The case-specific routing and services action is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links. The governing Junos routing/service principle is: EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure.

Incorrect Answers

A:

This alternative proposes: Verify the recursive resolution of a BGP NEXT_HOP before changing route selection preferences or assuming a received prefix is usable. It concerns a different Junos engineering issue BGP NEXT_HOP reachability and inet.3 recursion, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

C:

This alternative proposes: Use BGP EVPN MAC/IP reachability information to explain how remote PE devices learn and advertise Ethernet endpoints without relying only on flooding. It concerns a different Junos engineering issue EVPN MAC IP route type two control plane and learning, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: Validate BGP Layer 2 VPN service discovery through negotiated signaling families, route distinguishers/targets and customer connection mappings. It concerns a different Junos engineering issue BGP-signaled Layer 2 VPN NLRI and route target import, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 492

A provider routing design review considers this situation. A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured. A colleague proposes: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links. Which technical principle BEST supports that action? Select ONE best answer.

  1. Multipoint Ethernet services learn source MAC locations and flood unknown unicast, broadcast and multicast within permitted service boundaries; split-horizon rules limit loop-causing PW-to-PW forwarding.
  2. OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior.
  3. EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure.
  4. VPLS presents multipoint Ethernet LAN semantics across provider nodes, while LDP or BGP signaling can distribute service state and labels; mixing models requires supported interworking.

Explanation

Correct Answer

C:

The relevant Junos service-provider networking principle is: EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure. In the described provider-network case (A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured.), it supports the planned action: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

Incorrect Answers

A:

This alternative proposes: Multipoint Ethernet services learn source MAC locations and flood unknown unicast, broadcast and multicast within permitted service boundaries; split-horizon rules limit loop-causing PW-to-PW forwarding. It concerns a different Junos engineering issue VPLS MAC learning flooding and split-horizon safeguards, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

B:

This alternative proposes: OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior. It concerns a different Junos engineering issue OSPF external type E1 E2 route cost evaluation, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: VPLS presents multipoint Ethernet LAN semantics across provider nodes, while LDP or BGP signaling can distribute service state and labels; mixing models requires supported interworking. It concerns a different Junos engineering issue VPLS service control plane LDP versus BGP distribution, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 493

A Juniper service-provider engineer needs decisive verification evidence for this situation. A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Inspect MAC tables per VPLS instance, flood counters, PE attachment circuits, pseudowire membership, MAC aging and loop-protection state.
  2. Review show pim neighbors, RP mapping, IGMP membership, PIM joins, source registration and multicast forwarding entries for affected groups.
  3. Inspect BGP family negotiation, received Layer 2 VPN routes, RD/RT communities, service site identifiers, label mapping and per-instance state.
  4. Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding.

Explanation

Correct Answer

D:

The direct discriminating observation is: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding. In the stated situation (A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured.), the intended acceptance outcome is: Customer dual-homing provides the intended redundancy without duplicate broadcast delivery or loss of reachability when either PE fails.

Incorrect Answers

A:

This alternative proposes: Inspect MAC tables per VPLS instance, flood counters, PE attachment circuits, pseudowire membership, MAC aging and loop-protection state. It concerns a different Junos engineering issue VPLS MAC learning flooding and split-horizon safeguards, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

B:

This alternative proposes: Review show pim neighbors, RP mapping, IGMP membership, PIM joins, source registration and multicast forwarding entries for affected groups. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

C:

This alternative proposes: Inspect BGP family negotiation, received Layer 2 VPN routes, RD/RT communities, service site identifiers, label mapping and per-instance state. It concerns a different Junos engineering issue BGP-signaled Layer 2 VPN NLRI and route target import, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 494

A service-provider acceptance team reviews the result of a provider-service change. A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured. The intended verification is: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding. Which outcome BEST demonstrates success? Select ONE best answer.

  1. A narrowly scoped malicious traffic pattern is mitigated without dropping normal customer services or importing unauthorized traffic rules.
  2. The appropriate PEs establish only the requested customer Layer 2 connections and do not merge different customer switching domains.
  3. Customer dual-homing provides the intended redundancy without duplicate broadcast delivery or loss of reachability when either PE fails.
  4. Customer traffic follows learned remote PE paths and floods only where required without generating a provider-wide bridging loop.

Explanation

Correct Answer

C:

The verified success outcome is: Customer dual-homing provides the intended redundancy without duplicate broadcast delivery or loss of reachability when either PE fails. Confirm this by: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding.

Incorrect Answers

A:

That option concerns BGP FlowSpec validation and filtering boundaries. The related controlled intervention is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

B:

That option concerns BGP-signaled Layer 2 VPN NLRI and route target import. The related controlled intervention is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

D:

That option concerns VPLS MAC learning flooding and split-horizon safeguards. The related controlled intervention is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

Question 495

A Junos service-provider routing engineer investigates this service-provider network scenario. A customer data center is dual-homed to two provider PEs, but BUM traffic is duplicated because the multi-home DF behavior is misconfigured. Which TWO complementary steps combine a suitable technical action and its direct verification? Select TWO answers.

  1. Inspect show l2circuit connections, LDP session state, neighbor addresses, VC IDs, service-facing interfaces and transport LSP reachability.
  2. Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.
  3. Inspect broadcast-network DR and BDR election state and interface priority before attempting to control database exchange behavior on an Ethernet shared segment.
  4. Confirm appropriate PIM sparse-mode RP reachability and registration for any-source multicast groups before treating receiver membership as full service health.
  5. Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding.

Explanation

Correct Answers

B:

The case-specific routing and services action is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links. The governing Junos routing/service principle is: EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure. Verify the decision through: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding.

E:

The direct discriminating observation is: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding.

Incorrect Answers

A:

This alternative proposes: Inspect show l2circuit connections, LDP session state, neighbor addresses, VC IDs, service-facing interfaces and transport LSP reachability. It concerns a different Junos engineering issue LDP signaled Layer 2 circuit pseudowire status and VC identifiers, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

C:

This alternative proposes: Inspect broadcast-network DR and BDR election state and interface priority before attempting to control database exchange behavior on an Ethernet shared segment. It concerns a different Junos engineering issue OSPF designated router election on a multiaccess segment, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: Confirm appropriate PIM sparse-mode RP reachability and registration for any-source multicast groups before treating receiver membership as full service health. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 496

A Junos service-provider routing engineer investigates the following routing and service incident: One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Verify service MTU and any supported pseudowire encapsulation/control-word expectations when a pseudowire is signaled Up but customer frames fail.
  2. Verify the transport and service label roles in an MPLS Layer 3 VPN before attributing a forwarding failure to the customer routing protocol.
  3. Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.
  4. Validate BGP Layer 2 VPN service discovery through negotiated signaling families, route distinguishers/targets and customer connection mappings.

Explanation

Correct Answer

C:

The case-specific routing and services action is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

Incorrect Answers

A:

This alternative proposes: Verify service MTU and any supported pseudowire encapsulation/control-word expectations when a pseudowire is signaled Up but customer frames fail. It concerns a different Junos engineering issue Layer 2 pseudowire MTU and control-word interworking, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

B:

This alternative proposes: Verify the transport and service label roles in an MPLS Layer 3 VPN before attributing a forwarding failure to the customer routing protocol. It concerns a different Junos engineering issue MPLS VPN transport label stack and next hop, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: Validate BGP Layer 2 VPN service discovery through negotiated signaling families, route distinguishers/targets and customer connection mappings. It concerns a different Junos engineering issue BGP-signaled Layer 2 VPN NLRI and route target import, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 497

A provider routing design review considers this situation. One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently. A colleague proposes: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links. Which technical principle BEST supports that action? Select ONE best answer.

  1. EVPN commonly conveys MAC reachability through BGP route type 2; optional IP binding and policies support host learning and next-hop selection, while label or encapsulation rules depend on the deployment.
  2. EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure.
  3. PE/CE exchange can use a supported static, BGP, OSPF or other mechanism; the customer interface must belong to the intended VRF and outbound policy determines what enters VPN reachability.
  4. VPLS site identification and multihoming mechanisms help coordinate PE access, but customer-facing redundant paths need a supported convergence and loop-control design.

Explanation

Correct Answer

B:

The relevant Junos service-provider networking principle is: EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure. In the described provider-network case (One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently.), it supports the planned action: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

Incorrect Answers

A:

This alternative proposes: EVPN commonly conveys MAC reachability through BGP route type 2; optional IP binding and policies support host learning and next-hop selection, while label or encapsulation rules depend on the deployment. It concerns a different Junos engineering issue EVPN MAC IP route type two control plane and learning, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

C:

This alternative proposes: PE/CE exchange can use a supported static, BGP, OSPF or other mechanism; the customer interface must belong to the intended VRF and outbound policy determines what enters VPN reachability. It concerns a different Junos engineering issue PE to CE routing and customer route redistribution, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: VPLS site identification and multihoming mechanisms help coordinate PE access, but customer-facing redundant paths need a supported convergence and loop-control design. It concerns a different Junos engineering issue VPLS site identifiers multihoming and service convergence, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 498

A Juniper service-provider engineer needs decisive verification evidence for this situation. One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding.
  2. Inspect MAC tables per VPLS instance, flood counters, PE attachment circuits, pseudowire membership, MAC aging and loop-protection state.
  3. Inspect VPLS instance configuration, signaling session state, remote PE discovery, VPLS route or LDP label distribution and actual MAC reachability.
  4. Inspect BGP peer group roles, route-reflector client policy, originator ID, cluster list, accepted routes and reflectors' own next-hop reachability.

Explanation

Correct Answer

A:

The direct discriminating observation is: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding. In the stated situation (One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently.), the intended acceptance outcome is: Customer dual-homing provides the intended redundancy without duplicate broadcast delivery or loss of reachability when either PE fails.

Incorrect Answers

B:

This alternative proposes: Inspect MAC tables per VPLS instance, flood counters, PE attachment circuits, pseudowire membership, MAC aging and loop-protection state. It concerns a different Junos engineering issue VPLS MAC learning flooding and split-horizon safeguards, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

C:

This alternative proposes: Inspect VPLS instance configuration, signaling session state, remote PE discovery, VPLS route or LDP label distribution and actual MAC reachability. It concerns a different Junos engineering issue VPLS service control plane LDP versus BGP distribution, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: Inspect BGP peer group roles, route-reflector client policy, originator ID, cluster list, accepted routes and reflectors' own next-hop reachability. It concerns a different Junos engineering issue BGP route reflectors originator and cluster loop prevention, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Question 499

A service-provider acceptance team reviews the result of a provider-service change. One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently. The intended verification is: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding. Which outcome BEST demonstrates success? Select ONE best answer.

  1. Latency-sensitive traffic uses the correct supported queue while lower-priority flows experience controlled loss under congestion.
  2. The authorized CE service survives a primary PE outage with the expected alternate active and without creating duplicated Ethernet forwarding.
  3. Customer dual-homing provides the intended redundancy without duplicate broadcast delivery or loss of reachability when either PE fails.
  4. Participating customer sites exchange permitted Ethernet frames through a correctly signaled multipoint service without bridging unrelated tenants.

Explanation

Correct Answer

C:

The verified success outcome is: Customer dual-homing provides the intended redundancy without duplicate broadcast delivery or loss of reachability when either PE fails. Confirm this by: Inspect Ethernet segment configuration, ESI values, DF election or relevant designated-forwarder state, ES routes, BGP reachability and measured failover forwarding. The related controlled intervention is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

Incorrect Answers

A:

That option concerns CoS forwarding classes packet-loss priority and egress queue binding. The related controlled intervention is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

B:

This alternative proposes: The authorized CE service survives a primary PE outage with the expected alternate active and without creating duplicated Ethernet forwarding. It concerns a different Junos engineering issue VPLS site identifiers multihoming and service convergence, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

That option concerns VPLS service control plane LDP versus BGP distribution. The related controlled intervention is: Validate EVPN multihoming Ethernet segment identifiers and designated-forwarder behavior before activating redundant customer links.

Question 500

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. One EVPN PE goes offline and a standby node never takes over service because Ethernet segment membership was not advertised consistently. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Assume every MAC learned on an EVPN remote PE must be discovered exclusively by data-plane flood without any BGP MAC/IP advertisement.
  2. Give an unlimited strict-priority class most of the link and guarantee all other queues will receive their intended bandwidth during sustained overload.
  3. Configure two PEs with mismatched ESI values and assume the rest of the EVPN domain automatically infers their ports share one Ethernet segment.
  4. Disable all split-horizon checks and bridge every pseudowire to every other pseudowire as a first response to one unknown MAC address.

Explanation

Correct Answer

C:

That conflicts with the edge-to-cloud principle: EVPN all-active or single-active multihoming uses a shared ESI and appropriate DF/aliasing coordination to prevent BUM duplication and maintain reachable paths under failure.

Incorrect Answers

A:

This alternative proposes: Assume every MAC learned on an EVPN remote PE must be discovered exclusively by data-plane flood without any BGP MAC/IP advertisement. It concerns a different Junos engineering issue EVPN MAC IP route type two control plane and learning, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

B:

This alternative proposes: Give an unlimited strict-priority class most of the link and guarantee all other queues will receive their intended bandwidth during sustained overload. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

D:

This alternative proposes: Disable all split-horizon checks and bridge every pseudowire to every other pseudowire as a first response to one unknown MAC address. It concerns a different Junos engineering issue VPLS MAC learning flooding and split-horizon safeguards, not the directly tested provider-network issue EVPN Ethernet segment multihoming and designated forwarder.

Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests