Juniper JN0-664 Practice Test 5
Question 40
A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A high-priority replacement router joins a stable OSPF broadcast network but is not instantly DR, prompting a needless control-plane restart proposal. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.
- Assume every pair of routers on a broadcast VLAN must display Full adjacency, and bounce the elected DR whenever another router is only Two-Way.
- Declare that a Type 2 external metric always equals the sum of backbone hop costs and must be changed whenever an IGP link cost changes.
- Assume a core link with more bandwidth automatically has the lowest IS-IS metric when no operator metric policy has been configured.
- Disable OSPF on every provider interface merely because one neighbor is stuck in ExStart during database negotiation.
Explanation
Correct Answer
A:That conflicts with the edge-to-cloud principle: On an OSPF broadcast network a DR and BDR reduce full-adjacency fanout; elections depend on eligible interface priorities and router IDs, and are not always preemptive.
Incorrect Answers
B:This alternative proposes: Declare that a Type 2 external metric always equals the sum of backbone hop costs and must be changed whenever an IGP link cost changes. It concerns a different Junos engineering issue OSPF external type E1 E2 route cost evaluation, not the directly tested provider-network issue OSPF designated router election on a multiaccess segment.
C:This alternative proposes: Assume a core link with more bandwidth automatically has the lowest IS-IS metric when no operator metric policy has been configured. It concerns a different Junos engineering issue IS-IS wide metrics traffic engineering and cost selection, not the directly tested provider-network issue OSPF designated router election on a multiaccess segment.
D:This alternative proposes: Disable OSPF on every provider interface merely because one neighbor is stuck in ExStart during database negotiation. It concerns a different Junos engineering issue OSPF adjacency MTU and hello compatibility diagnosis, not the directly tested provider-network issue OSPF designated router election on a multiaccess segment.
Question 41
A Junos service-provider routing engineer investigates the following routing and service incident: Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.
- Choose the correct OSPF stub or NSSA area design according to the requirement for redistributed external routes and verify supported Type 7 translation.
- Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
- Confirm the eligibility requirements for BGP multipath and distinguish multiple accepted routes from actual installed forwarding next hops.
- Validate that all nonbackbone OSPF areas have a supported logical connection to area 0, and use virtual links only as a documented transitional design.
Explanation
Correct Answer
B:OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior. Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
Incorrect Answers
A:This alternative proposes: Choose the correct OSPF stub or NSSA area design according to the requirement for redistributed external routes and verify supported Type 7 translation. It concerns a different Junos engineering issue OSPF stub NSSA and external LSA handling, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: Confirm the eligibility requirements for BGP multipath and distinguish multiple accepted routes from actual installed forwarding next hops. It concerns a different Junos engineering issue BGP multipath equal cost and per-flow forwarding, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
D:This alternative proposes: Validate that all nonbackbone OSPF areas have a supported logical connection to area 0, and use virtual links only as a documented transitional design. It concerns a different Junos engineering issue OSPF multi-area backbone connectivity and virtual-link limitations, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 42
A provider routing design review considers this situation. Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances. A colleague proposes: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits. Which technical principle BEST supports that action? Select ONE best answer.
- A stub area generally suppresses external Type 5 LSAs, while an NSSA can inject external prefixes as Type 7 LSAs for translation at an ABR under configured conditions.
- Multipoint Ethernet services learn source MAC locations and flood unknown unicast, broadcast and multicast within permitted service boundaries; split-horizon rules limit loop-causing PW-to-PW forwarding.
- ABRs can advertise summary information between areas while routing policy and area ranges alter which routes are visible; overly broad aggregation can blackhole traffic if specifics lack coverage.
- OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior.
Explanation
Correct Answer
D:The relevant Junos service-provider networking principle is: OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior. In the described provider-network case (Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances.), it supports the planned action: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
Incorrect Answers
A:This alternative proposes: A stub area generally suppresses external Type 5 LSAs, while an NSSA can inject external prefixes as Type 7 LSAs for translation at an ABR under configured conditions. It concerns a different Junos engineering issue OSPF stub NSSA and external LSA handling, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
B:This alternative proposes: Multipoint Ethernet services learn source MAC locations and flood unknown unicast, broadcast and multicast within permitted service boundaries; split-horizon rules limit loop-causing PW-to-PW forwarding. It concerns a different Junos engineering issue VPLS MAC learning flooding and split-horizon safeguards, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: ABRs can advertise summary information between areas while routing policy and area ranges alter which routes are visible; overly broad aggregation can blackhole traffic if specifics lack coverage. It concerns a different Junos engineering issue OSPF interarea route summarization and route restrictions, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 43
A Juniper service-provider engineer needs decisive verification evidence for this situation. Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.
- Review show pim neighbors, RP mapping, IGMP membership, PIM joins, source registration and multicast forwarding entries for affected groups.
- Check area IDs, ABR relationships, backbone LSA visibility, virtual-link state, and show ospf neighbor and database before adjusting policies.
- Compare show ospf interface, election priorities, router IDs, two-way versus full neighbors, and current DR/BDR state after planned link transitions.
- Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
Explanation
Correct Answer
D:The direct discriminating observation is: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE. In the stated situation (Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances.), the intended acceptance outcome is: The chosen exit aligns to the operator's end-to-end cost policy, and failover to another valid ASBR meets the documented path objective.
Incorrect Answers
A:This alternative proposes: Review show pim neighbors, RP mapping, IGMP membership, PIM joins, source registration and multicast forwarding entries for affected groups. It concerns a different Junos engineering issue PIM sparse mode rendezvous point and shared tree operation, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
B:This alternative proposes: Check area IDs, ABR relationships, backbone LSA visibility, virtual-link state, and show ospf neighbor and database before adjusting policies. It concerns a different Junos engineering issue OSPF multi-area backbone connectivity and virtual-link limitations, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: Compare show ospf interface, election priorities, router IDs, two-way versus full neighbors, and current DR/BDR state after planned link transitions. It concerns a different Junos engineering issue OSPF designated router election on a multiaccess segment, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 44
A service-provider acceptance team reviews the result of a provider-service change. Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances. The intended verification is: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE. Which outcome BEST demonstrates success? Select ONE best answer.
- All site prefixes move between areas without routing loops, and the proposed backbone topology survives its agreed failure test.
- Only the subscribed sender's multicast stream reaches intended receivers without relying on an any-source rendezvous point.
- IPv6 customer and loopback prefixes are reachable along the intended paths while existing IPv4 OSPF operation is unchanged.
- The chosen exit aligns to the operator's end-to-end cost policy, and failover to another valid ASBR meets the documented path objective.
Explanation
Correct Answer
D:The verified success outcome is: The chosen exit aligns to the operator's end-to-end cost policy, and failover to another valid ASBR meets the documented path objective. Confirm this by: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
Incorrect Answers
A:That option concerns OSPF multi-area backbone connectivity and virtual-link limitations. The related controlled intervention is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
B:That option concerns Source-specific multicast and IGMPv3 source filtering. The related controlled intervention is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
C:This alternative proposes: IPv6 customer and loopback prefixes are reachable along the intended paths while existing IPv4 OSPF operation is unchanged. It concerns a different Junos engineering issue OSPFv3 IPv6 neighbor and IPv4 separation, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 45
A Junos service-provider routing engineer investigates this service-provider network scenario. Two P routers learn the same external Internet prefix from separate ASBRs and need consistent exit selection despite different core distances. Which TWO complementary steps combine a suitable technical action and its direct verification? Select TWO answers.
- Validate the PE-to-CE routing protocol and routing-instance binding before exporting customer routes into MP-BGP or changing provider-core policies.
- Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
- Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
- Compare area type on all routers, ASBR redistribution, Type 3 summaries, Type 5 or Type 7 database entries, and resulting route installation.
- Diagnose divergent IS-IS topology by tracing LSP sequences, database scope and complete sequence-number packet exchange.
Explanation
Correct Answers
B:The case-specific routing and services action is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits. The governing Junos routing/service principle is: OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior.
C:The direct discriminating observation is: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
Incorrect Answers
A:This alternative proposes: Validate the PE-to-CE routing protocol and routing-instance binding before exporting customer routes into MP-BGP or changing provider-core policies. It concerns a different Junos engineering issue PE to CE routing and customer route redistribution, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
D:This alternative proposes: Compare area type on all routers, ASBR redistribution, Type 3 summaries, Type 5 or Type 7 database entries, and resulting route installation. It concerns a different Junos engineering issue OSPF stub NSSA and external LSA handling, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
E:This alternative proposes: Diagnose divergent IS-IS topology by tracing LSP sequences, database scope and complete sequence-number packet exchange. It concerns a different Junos engineering issue IS-IS link-state packet flooding and database consistency, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 46
A Junos service-provider routing engineer investigates the following routing and service incident: After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.
- Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
- Investigate an OSPF adjacency that remains in ExStart or Exchange by comparing interface MTU and protocol parameters before resetting every neighbor.
- Verify address-family negotiation and route transport for IPv4 unicast, VPNv4, VPNv6 or EVPN separately rather than treating Established BGP TCP state as proof each family works.
- Apply summarization or import/export controls at the appropriate OSPF area boundary after proving which access prefixes should be reachable.
Explanation
Correct Answer
A:The case-specific routing and services action is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits. The governing Junos routing/service principle is: OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior. Verify the decision through: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
Incorrect Answers
B:This alternative proposes: Investigate an OSPF adjacency that remains in ExStart or Exchange by comparing interface MTU and protocol parameters before resetting every neighbor. It concerns a different Junos engineering issue OSPF adjacency MTU and hello compatibility diagnosis, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: Verify address-family negotiation and route transport for IPv4 unicast, VPNv4, VPNv6 or EVPN separately rather than treating Established BGP TCP state as proof each family works. It concerns a different Junos engineering issue Multiprotocol BGP family negotiations and VPN routes, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
D:This alternative proposes: Apply summarization or import/export controls at the appropriate OSPF area boundary after proving which access prefixes should be reachable. It concerns a different Junos engineering issue OSPF interarea route summarization and route restrictions, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 47
A provider routing design review considers this situation. After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer. A colleague proposes: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits. Which technical principle BEST supports that action? Select ONE best answer.
- MVPN carries customer multicast across provider networks using supported control-plane membership and provider transport mechanisms; unicast VRF reachability alone does not prove multicast distribution.
- OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior.
- OSPFv3 uses IPv6-related control-plane processing and link-local neighbor communication; it must be configured and verified according to the selected address family and release.
- On an OSPF broadcast network a DR and BDR reduce full-adjacency fanout; elections depend on eligible interface priorities and router IDs, and are not always preemptive.
Explanation
Correct Answer
B:The relevant Junos service-provider networking principle is: OSPF Type 1 external metrics include internal cost toward the ASBR, whereas Type 2 external metrics primarily compare the advertised external metric with internal tie behavior. In the described provider-network case (After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer.), it supports the planned action: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
Incorrect Answers
A:This alternative proposes: MVPN carries customer multicast across provider networks using supported control-plane membership and provider transport mechanisms; unicast VRF reachability alone does not prove multicast distribution. It concerns a different Junos engineering issue Multicast VPN provider and customer traffic separation, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: OSPFv3 uses IPv6-related control-plane processing and link-local neighbor communication; it must be configured and verified according to the selected address family and release. It concerns a different Junos engineering issue OSPFv3 IPv6 neighbor and IPv4 separation, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
D:This alternative proposes: On an OSPF broadcast network a DR and BDR reduce full-adjacency fanout; elections depend on eligible interface priorities and router IDs, and are not always preemptive. It concerns a different Junos engineering issue OSPF designated router election on a multiaccess segment, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 48
A Juniper service-provider engineer needs decisive verification evidence for this situation. After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.
- Check area IDs, ABR relationships, backbone LSA visibility, virtual-link state, and show ospf neighbor and database before adjusting policies.
- Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE.
- Inspect show ospf3 neighbor, show ospf3 interface, IPv6 link-local addresses, area association, LSDB and inet6 routes independently of OSPFv2.
- Inspect hub and spoke import/export communities, default-route presence, return routes, firewall/NAT policy and VPN-specific forwarding table entries.
Explanation
Correct Answer
B:The direct discriminating observation is: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE. In the stated situation (After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer.), the intended acceptance outcome is: The chosen exit aligns to the operator's end-to-end cost policy, and failover to another valid ASBR meets the documented path objective.
Incorrect Answers
A:This alternative proposes: Check area IDs, ABR relationships, backbone LSA visibility, virtual-link state, and show ospf neighbor and database before adjusting policies. It concerns a different Junos engineering issue OSPF multi-area backbone connectivity and virtual-link limitations, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: Inspect show ospf3 neighbor, show ospf3 interface, IPv6 link-local addresses, area association, LSDB and inet6 routes independently of OSPFv2. It concerns a different Junos engineering issue OSPFv3 IPv6 neighbor and IPv4 separation, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
D:This alternative proposes: Inspect hub and spoke import/export communities, default-route presence, return routes, firewall/NAT policy and VPN-specific forwarding table entries. It concerns a different Junos engineering issue Layer 3 VPN hub spoke topology and controlled Internet breakout, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
Question 49
A service-provider acceptance team reviews the result of a provider-service change. After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer. The intended verification is: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE. Which outcome BEST demonstrates success? Select ONE best answer.
- The session establishes over the intended transport and advertises only authorized routing information even across a link failure.
- IPv6 customer and loopback prefixes are reachable along the intended paths while existing IPv4 OSPF operation is unchanged.
- The appropriate designated and backup routers maintain required adjacencies and exchange reachability across the shared Ethernet without unnecessary resets.
- The chosen exit aligns to the operator's end-to-end cost policy, and failover to another valid ASBR meets the documented path objective.
Explanation
Correct Answer
D:The verified success outcome is: The chosen exit aligns to the operator's end-to-end cost policy, and failover to another valid ASBR meets the documented path objective. Confirm this by: Review ASBR origin, advertised external metric type, internal path-to-ASBR cost, routing table preferences, and selected next hops at each PE. The related controlled intervention is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
Incorrect Answers
A:That option concerns BGP external multihop and loopback peer reachability. The related controlled intervention is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
B:This alternative proposes: IPv6 customer and loopback prefixes are reachable along the intended paths while existing IPv4 OSPF operation is unchanged. It concerns a different Junos engineering issue OSPFv3 IPv6 neighbor and IPv4 separation, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:That option concerns OSPF designated router election on a multiaccess segment. The related controlled intervention is: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
Question 50
A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. After moving a transit handoff, the team expects E1 and E2 external paths to behave identically when the path to one ASBR gets longer. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.
- Install a summary for discontiguous customer access blocks and drop all component routes without verifying that the ABR actually forwards the entire aggregate.
- Declare that a Type 2 external metric always equals the sum of backbone hop costs and must be changed whenever an IGP link cost changes.
- Disable OSPF on every provider interface merely because one neighbor is stuck in ExStart during database negotiation.
- Configure an ingress policer to discard every packet above a tiny burst threshold and claim it is equivalent to lossless queuing under egress shaping.
Explanation
Correct Answer
B:Apply instead: Examine external route Type 1 versus Type 2 cost behavior and the forwarding cost toward the ASBR when determining why routers choose different exits.
Incorrect Answers
A:This alternative proposes: Install a summary for discontiguous customer access blocks and drop all component routes without verifying that the ABR actually forwards the entire aggregate. It concerns a different Junos engineering issue OSPF interarea route summarization and route restrictions, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
C:This alternative proposes: Disable OSPF on every provider interface merely because one neighbor is stuck in ExStart during database negotiation. It concerns a different Junos engineering issue OSPF adjacency MTU and hello compatibility diagnosis, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.
D:This alternative proposes: Configure an ingress policer to discard every packet above a tiny burst threshold and claim it is equivalent to lossless queuing under egress shaping. It concerns a different Junos engineering issue CoS policers traffic-shaping and committed-rate contracts, not the directly tested provider-network issue OSPF external type E1 E2 route cost evaluation.