Juniper JN0-452 Practice Test 24
Question 230
Select TWO appropriate investigation, change, and acceptance elements for this situation. A lab enables protected management frames only as an optional feature and claims robust management protection is mandatory for all users.
- Inspect RSN PMF capability bits, client negotiated status, management captures and rejected joins.
- Reclassify the device under approved identity and role governance and test policy changes before production acceptance.
- Inspect number of BSSIDs, beacon interval, airtime overhead, client capabilities and genuine policy distinctions.
- Distinguish optional and required PMF policies and test client association against the approved WLAN security requirement.
- Call PMF optional and required equivalent because both allow the AP to transmit protected frames.
Explanation
Correct Answer
A:Optional PMF permits some clients without protected robust management frames, whereas required PMF rejects incompatible peers. Distinguish optional and required PMF policies and test client association against the approved WLAN security requirement. This observation directly isolates the suspected dependency before a risky change.
D:Optional PMF permits some clients without protected robust management frames, whereas required PMF rejects incompatible peers. Before making it, verify: Inspect RSN PMF capability bits, client negotiated status, management captures and rejected joins.
Incorrect Answers
B:Here the decisive dependency is: Optional PMF permits some clients without protected robust management frames, whereas required PMF rejects incompatible peers.
C:This check investigates a different symptom (A small office advertises eight redundant SSIDs with identical policy and clients waste airtime scanning and probing each network.). For this incident, the targeted check is: Inspect RSN PMF capability bits, client negotiated status, management captures and rejected joins.
E:Optional PMF permits some clients without protected robust management frames, whereas required PMF rejects incompatible peers. The required remediation is: Distinguish optional and required PMF policies and test client association against the approved WLAN security requirement.
Question 231
An architect must identify the primary underlying platform behavior. Which explanation is correct? A shopping center uploads an architectural drawing without a verified distance scale, causing location-trigger zones to activate several meters early. Select the ONE best answer.
- Indoor location mapping requires consistent geometric axes; a mirrored layout can systematically invert positions.
- Variable metallic obstacles can shadow low-power radio tags and alter the set of receivers that detect them.
- Location event chronology should not be rewritten when dashboard time presentation changes for users.
- Pixel positions alone do not encode real-world distance unless the underlying floorplan geometry is correctly calibrated.
Explanation
Correct Answer
D:The corresponding supported intervention is: Calibrate floorplan scale against surveyed reference distances and verify location zone boundaries using repeated walk tests.
Incorrect Answers
A:The alternative governing principle is: Indoor location mapping requires consistent geometric axes; a mirrored layout can systematically invert positions. The mechanism tested by the reported case is: Pixel positions alone do not encode real-world distance unless the underlying floorplan geometry is correctly calibrated.
B:The alternative governing principle is: Variable metallic obstacles can shadow low-power radio tags and alter the set of receivers that detect them. The mechanism tested by the reported case is: Pixel positions alone do not encode real-world distance unless the underlying floorplan geometry is correctly calibrated.
C:The alternative governing principle is: Location event chronology should not be rewritten when dashboard time presentation changes for users. The mechanism tested by the reported case is: Pixel positions alone do not encode real-world distance unless the underlying floorplan geometry is correctly calibrated.
Question 232
Which specific remediation is the best controlled next step? A rack of Mist APs comes online with DHCP addresses but their serials are not listed under the new site after shipment. Select the ONE best answer.
- Inventory tenant-specific identity integrations, certificate trust, VLAN attachment and WLAN scope before replicating the configuration.
- Verify device inventory claiming and assignment to the intended organization and site before judging WLAN configuration.
- Check the supported API endpoint, HTTP method and schema and retry only the correct authorized operation in a controlled scope.
- Verify management VLAN DHCP and DNS prerequisites and allow documented outbound cloud connectivity after physical power succeeds.
Explanation
Correct Answer
B:Network reachability does not itself establish the cloud ownership and site association required for managed service. Before making it, verify: Review purchase claim records, device serials, organization membership, site assignment and initial contact events.
Incorrect Answers
A:Inventory tenant-specific identity integrations, certificate trust, VLAN attachment and WLAN scope before replicating the configuration. Here the decisive dependency is: Network reachability does not itself establish the cloud ownership and site association required for managed service. Use the specified intervention: Verify device inventory claiming and assignment to the intended organization and site before judging WLAN configuration.
C:That option would check the supported API endpoint, HTTP method and schema and retry only the correct authorized operation in a controlled scope, but it addresses a different concern. Network reachability does not itself establish the cloud ownership and site association required for managed service.
D:That option would verify management VLAN DHCP and DNS prerequisites and allow documented outbound cloud connectivity after physical power succeeds, but it addresses a different concern. Network reachability does not itself establish the cloud ownership and site association required for managed service.
Question 233
Which evidence-gathering check most directly narrows the cause of this incident? An instructor claims that multiple PSK identities automatically create separate SSIDs for every classroom. Select the ONE best answer.
- Review PSK-to-role mapping, policy evaluation, VLAN assignments and client authorization test outcomes.
- Review RSN advertised AKMs, PMF requirements, client drivers, EAP logs and WLAN authentication failures.
- Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings.
- Inspect advertised security mode, RSN and PMF negotiation, WIDS events and controlled access attempts.
Explanation
Correct Answer
C:Multiple accepted keys can provide differentiated access within a single WLAN without requiring a unique beacon SSID per credential. Review the supported multi-PSK WLAN design and distinguish one advertised SSID from per-secret policy assignment.
Incorrect Answers
A:Multiple accepted passphrases do not enforce least privilege unless their assigned authorization policies differ as intended. The focused check for the reported condition is: Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings.
B:Inventory device security support and provide a documented segregated alternative or approved replacement without weakening the corporate WLAN. The focused check for the reported condition is: Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings.
D:RF anomaly detection does not encrypt normal client payloads or prove that all unauthorized access is prevented. The focused check for the reported condition is: Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings.
Question 234
Before changing production, which focused diagnostic is most useful for identifying the true dependency? A metal-shelved distribution center has unpredictable Wi-Fi fades even when the site map suggests unobstructed geometric coverage. Select the ONE best answer.
- Compare multipath-sensitive SNR, retry bursts, antenna placement, shelf geometry and walk-test recordings.
- Inspect 802.11v BTM request and response frames, candidate lists and client roaming behavior.
- Review channel allocations, overlap maps, airtime busy time, client throughput and density.
- Review frame duration fields, NAV updates, contention timing and successful subsequent transmissions.
Explanation
Correct Answer
A:Survey representative paths for multipath fading and reflections, then tune placement and channel plan from measured coverage.
Incorrect Answers
B:Interpret supported BSS transition management as a steering suggestion and validate client response and RF alternatives. The focused check for the reported condition is: Compare multipath-sensitive SNR, retry bursts, antenna placement, shelf geometry and walk-test recordings.
C:Wider channels increase theoretical peak rate but can reduce reuse and raise contention in dense multi-AP spaces. The focused check for the reported condition is: Compare multipath-sensitive SNR, retry bursts, antenna placement, shelf geometry and walk-test recordings.
D:The Network Allocation Vector supports virtual carrier sensing by temporarily reserving medium access for expected frames. The focused check for the reported condition is: Compare multipath-sensitive SNR, retry bursts, antenna placement, shelf geometry and walk-test recordings.
Question 235
A change engineer must select a justified corrective intervention. Which should be approved? A battery-powered IoT sensor remains awake too frequently because a WLAN uses an overly aggressive DTIM interval for its traffic pattern. Select the ONE best answer.
- Use a permitted channel plan and active or passive scanning as applicable to survey the relevant advertised channels.
- Interpret the advertised beacon interval using 802.11 time units and measure actual frame timing rather than guessing milliseconds.
- Trace beacon discovery, 802.11 authentication and association, EAP exchange and DHCP as distinct service stages.
- Review beacon and DTIM configuration against broadcast requirements and client sleep behavior before controlled adjustment.
Explanation
Correct Answer
D:DTIM schedules delivery opportunities for buffered group traffic and can influence power-saving station wake periods. Acceptance criterion: The test sensor meets battery targets while scheduled multicast and required network discovery remain reliable.
Incorrect Answers
A:That option would use a permitted channel plan and active or passive scanning as applicable to survey the relevant advertised channels, but it addresses a different concern. DTIM schedules delivery opportunities for buffered group traffic and can influence power-saving station wake periods.
B:Interpret the advertised beacon interval using 802.11 time units and measure actual frame timing rather than guessing milliseconds. Here the decisive dependency is: DTIM schedules delivery opportunities for buffered group traffic and can influence power-saving station wake periods. Use the specified intervention: Review beacon and DTIM configuration against broadcast requirements and client sleep behavior before controlled adjustment.
C:That option would trace beacon discovery, 802.11 authentication and association, EAP exchange and DHCP as distinct service stages, but it addresses a different concern. DTIM schedules delivery opportunities for buffered group traffic and can influence power-saving station wake periods.
Question 236
Select TWO appropriate investigation, change, and acceptance elements for this situation. A stadium RF engineer mistakes a low RSSI reading for low noise and chooses a power increase without checking SNR.
- Record RSSI, noise floor, SNR, retry count, MCS changes and surrounding AP transmit powers.
- Validate client 6 GHz and security capability, then supply an approved compatible access method without downgrading 6 GHz security.
- Examine MIMO capability elements, spatial stream negotiation, AP hardware support and measured concurrent throughput.
- Compare signal strength against measured noise floor and interference before changing power or AP placement.
- Increase all transmit powers until the RSSI appears green regardless of noise and channel contention.
Explanation
Correct Answer
A:Record RSSI, noise floor, SNR, retry count, MCS changes and surrounding AP transmit powers. This check separates the suspected dependency before a risky change. Signal-to-noise ratio determines usable modulation reliability more directly than absolute RSSI without context. The appropriate intervention is: Compare signal strength against measured noise floor and interference before changing power or AP placement.
D:Before making it, verify: Record RSSI, noise floor, SNR, retry count, MCS changes and surrounding AP transmit powers. Acceptance criterion: The adjusted cell achieves a stable higher SNR and fewer frame retries without harmful neighboring-cell overlap.
Incorrect Answers
B:That option would validate client 6 GHz and security capability, then supply an approved compatible access method without downgrading 6 GHz security, but it addresses a different concern. Signal-to-noise ratio determines usable modulation reliability more directly than absolute RSSI without context.
C:This examines a different symptom (An administrator labels every 802.11ac client MU-MIMO-capable without checking spatial stream and receiver requirements.).
E:Increase all transmit powers until the RSSI appears green regardless of noise and channel contention. This shortcut skips or undermines the needed control. Signal-to-noise ratio determines usable modulation reliability more directly than absolute RSSI without context. The required remediation is: Compare signal strength against measured noise floor and interference before changing power or AP placement.
Question 237
Which observed outcome provides the strongest verification for this requirement? An organization intends to assign unique dynamic VLANs through wireless roles but wired AP trunk ports carry only the native VLAN. Select the ONE best answer.
- A controlled test identifies abusive frame bursts and supported protected clients remain associated under policy.
- An authenticated guest receives the authorized role and is not incorrectly redirected, while unauthenticated devices remain restricted.
- The neighbor AP is not blocked incorrectly and the true unauthorized wired-connected test AP is identified.
- Test clients receive their assigned addressing and permitted connectivity on each authorized VLAN without leakage.
Explanation
Correct Answer
D:A correctly assigned wireless VLAN will fail end-to-end service if the wired uplink does not carry that segment. It validates the controlled change: Coordinate supported wireless authorization with switch trunk VLAN availability and verify each role's data-plane path.
Incorrect Answers
A:Disruptive management-frame activity can degrade service without causing an AP hardware or network link failure. This is a different acceptance outcome; the required result here is: Test clients receive their assigned addressing and permitted connectivity on each authorized VLAN without leakage.
B:A portal can successfully identify a user yet fail to transition the actual station's access-policy state. This is a different acceptance outcome; the required result here is: Test clients receive their assigned addressing and permitted connectivity on each authorized VLAN without leakage.
C:SSID similarity and radio proximity alone cannot establish that an AP is connected illicitly to the protected wired network. This is a different acceptance outcome; the required result here is: Test clients receive their assigned addressing and permitted connectivity on each authorized VLAN without leakage.
Question 238
A change engineer must select a justified corrective intervention. Which should be approved? An AP has high available radio capacity but client traffic remains slow because the switch uplink is repeatedly renegotiating. Select the ONE best answer.
- Select the correct organization and site and use unique client and BSSID identities to inspect accurate client experience events.
- Compare spectrum interference timeline and RRM decisions to identify whether channel movement was a response or the root cause.
- Rebind alert policy to the correct current organization and site objects and validate the selected monitoring population.
- Correlate wired uplink errors and link speed with Wireless Assurance throughput instead of treating radio-only metrics as sufficient.
Explanation
Correct Answer
D:A WLAN user service path can be constrained by a faulty wired dependency even with healthy RF capacity. Acceptance criterion: The physical link stabilizes and wireless clients achieve expected goodput without changes to SSID security.
Incorrect Answers
A:That option would select the correct organization and site and use unique client and BSSID identities to inspect accurate client experience events, but it addresses a different concern. A WLAN user service path can be constrained by a faulty wired dependency even with healthy RF capacity.
B:That option would compare spectrum interference timeline and RRM decisions to identify whether channel movement was a response or the root cause, but it addresses a different concern. A WLAN user service path can be constrained by a faulty wired dependency even with healthy RF capacity.
C:Rebind alert policy to the correct current organization and site objects and validate the selected monitoring population. Here the decisive dependency is: A WLAN user service path can be constrained by a faulty wired dependency even with healthy RF capacity. Use the specified intervention: Correlate wired uplink errors and link speed with Wireless Assurance throughput instead of treating radio-only metrics as sufficient.
Question 239
Which acceptance evidence would show that the original fault or risk was actually remediated? A mixed campus requires one SSID for contractor devices but each partner must be isolated with its own cloud-managed passphrase. Select the ONE best answer.
- Clients discover the approved protected guest service and no unauthorized legacy open BSSID remains in scope.
- Test clients receive their assigned addressing and permitted connectivity on each authorized VLAN without leakage.
- Partners authenticate to one intended SSID but traffic between separate partner groups is denied.
- Beacon airtime decreases and all necessary user groups continue authenticating to their approved services.
Explanation
Correct Answer
C:Per-key identity differentiation can support group isolation without multiplying SSIDs for each partner when configured correctly. It validates the controlled change: Design supported multiple-PSK groups and per-group policy mapping with explicit limits on lateral connectivity.
Incorrect Answers
A:Duplicate branded SSIDs with different protection can confuse client selection and increase downgrade or impersonation risk. This is a different acceptance outcome; the required result here is: Partners authenticate to one intended SSID but traffic between separate partner groups is denied.
B:A correctly assigned wireless VLAN will fail end-to-end service if the wired uplink does not carry that segment. This is a different acceptance outcome; the required result here is: Partners authenticate to one intended SSID but traffic between separate partner groups is denied.
D:Beacon and probe overhead grows with advertised WLAN count and can consume meaningful airtime in dense environments. This is a different acceptance outcome; the required result here is: Partners authenticate to one intended SSID but traffic between separate partner groups is denied.
Question 240
The change record requires diagnosis, intervention, and verification. Which full plan is most defensible? An operator uses a Marvis natural-language phrase with the wrong client MAC and obtains a convincing explanation for an unrelated device. Select the ONE best answer.
- Investigate: Review source/destination BSSIDs, site AP filter, client roam timeline and Marvis observation scope. Remediate: Include both relevant source and destination radios and examine the recorded transition as a single client movement. Verify: The client roam event shows both APs with accurate timings and the correction reduces handoff interruption.
- Investigate: Review action metadata, cohort filters, signal and retry histories, site devices and current SLE. Remediate: Retrieve supporting action scope, interval, affected clients and raw RF metrics before forming a corrective change. Verify: A controlled adjustment corrects the affected cohort's measured symptoms without degrading unrelated devices.
- Investigate: Inspect action histories, query audit, detected conditions, supporting telemetry and notification timing. Remediate: Distinguish evidence-led proactive detection from reactive natural-language investigation and select the right workflow for each. Verify: A known recurring condition produces appropriate action evidence, and a targeted question returns linked session details.
- Investigate: Compare query client MAC, DHCP IP mapping, BSSID association, device inventory and ticket timestamps. Remediate: Verify identifiers and cross-check the selected client's actual incident before acting on any returned explanation. Verify: Correct identifier selection returns the relevant session and remediation addresses the verified original problem.
Explanation
Correct Answer
D:AI search results remain dependent on correct query parameters and the availability of matching telemetry. Compare query client MAC, DHCP IP mapping, BSSID association, device inventory and ticket timestamps.
Incorrect Answers
A:Review source/destination BSSIDs, site AP filter, client roam timeline and Marvis observation scope. Remediate: Include both relevant source and destination radios and examine the recorded transition as a single client movement. Verify: The client roam event shows both APs with accurate timings and the correction reduces handoff interruption. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Verify identifiers and cross-check the selected client's actual incident before acting on any returned explanation.
B:Review action metadata, cohort filters, signal and retry histories, site devices and current SLE. Remediate: Retrieve supporting action scope, interval, affected clients and raw RF metrics before forming a corrective change. Verify: A controlled adjustment corrects the affected cohort's measured symptoms without degrading unrelated devices. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Verify identifiers and cross-check the selected client's actual incident before acting on any returned explanation.
C:Inspect action histories, query audit, detected conditions, supporting telemetry and notification timing. Remediate: Distinguish evidence-led proactive detection from reactive natural-language investigation and select the right workflow for each. Verify: A known recurring condition produces appropriate action evidence, and a targeted question returns linked session details. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Verify identifiers and cross-check the selected client's actual incident before acting on any returned explanation.