Juniper JN0-452 Practice Test 22
Question 210
Which observed outcome provides the strongest verification for this requirement? A corporate help desk accepts a public QR code containing the WLAN PSK and assumes a printed QR label provides secure distribution. Select the ONE best answer.
- Revoked QR credentials no longer authenticate and approved users receive access with appropriately governed credentials.
- Eligible employees join with the intended protected mode while legacy exceptions remain restricted and audited.
- Test devices obtain the intended VLAN and cannot access network resources outside their approved policy.
- A packet inspection confirms the intended protected transport and client isolation rules without impairing onboarding.
Explanation
Correct Answer
A:Encoding a secret inside a QR code does not restrict who can decode or share that credential. It validates the controlled change: Treat published QR credential material as exposed and move to an approved onboarding and identity-specific credential approach.
Incorrect Answers
B:The alternative observation is: Eligible employees join with the intended protected mode while legacy exceptions remain restricted and audited. The acceptance test for this case is: Revoked QR credentials no longer authenticate and approved users receive access with appropriately governed credentials.
C:The alternative observation is: Test devices obtain the intended VLAN and cannot access network resources outside their approved policy. The acceptance test for this case is: Revoked QR credentials no longer authenticate and approved users receive access with appropriately governed credentials.
D:An open Wi-Fi association does not inherently provide link-layer confidentiality to traffic sent over the radio medium. This is a different acceptance outcome; the required result here is: Revoked QR credentials no longer authenticate and approved users receive access with appropriately governed credentials.
Question 211
Which observed outcome provides the strongest verification for this requirement? A company deploys a WPA2-Personal WLAN with the same password on printed visitor cards and expects strong resistance after key disclosure. Select the ONE best answer.
- Test devices obtain the intended VLAN and cannot access network resources outside their approved policy.
- Old visitor credentials fail after rotation and new guest clients connect only to the approved restricted network.
- Two unauthorized guests cannot connect to each other's services while both can access approved internet resources.
- A controlled prohibited destination test fails while approved application paths continue.
Explanation
Correct Answer
B:A broadly distributed shared PSK is difficult to revoke selectively and no longer establishes exclusive possession. It validates the controlled change: Use supported credential lifecycle controls and separate visitor access from sensitive networks, rotating exposed shared secrets.
Incorrect Answers
A:The alternative observation is: Test devices obtain the intended VLAN and cannot access network resources outside their approved policy. The acceptance test for this case is: Old visitor credentials fail after rotation and new guest clients connect only to the approved restricted network.
C:The alternative observation is: Two unauthorized guests cannot connect to each other's services while both can access approved internet resources. The acceptance test for this case is: Old visitor credentials fail after rotation and new guest clients connect only to the approved restricted network.
D:The alternative observation is: A controlled prohibited destination test fails while approved application paths continue. The acceptance test for this case is: Old visitor credentials fail after rotation and new guest clients connect only to the approved restricted network.
Question 212
Before changing production, which focused diagnostic is most useful for identifying the true dependency? A company deploys a WPA2-Personal WLAN with the same password on printed visitor cards and expects strong resistance after key disclosure. Select the ONE best answer.
- Inspect number of BSSIDs, beacon interval, airtime overhead, client capabilities and genuine policy distinctions.
- Review registered devices, key assignment, rollout group, association failures and old-key test results.
- Review PSK exposure history, WLAN security mode, authorized networks and old-credential rejection tests.
- Inspect tenant roles, wireless policy, client identifiers, VLAN or group assignment and peer-to-peer tests.
Explanation
Correct Answer
C:A broadly distributed shared PSK is difficult to revoke selectively and no longer establishes exclusive possession. Use supported credential lifecycle controls and separate visitor access from sensitive networks, rotating exposed shared secrets.
Incorrect Answers
A:Beacon and probe overhead grows with advertised WLAN count and can consume meaningful airtime in dense environments. The focused check for the reported condition is: Review PSK exposure history, WLAN security mode, authorized networks and old-credential rejection tests.
B:Shared credentials create broad rotation blast radius, while mapped multiple PSKs can support staged changes within supported limits. The focused check for the reported condition is: Review PSK exposure history, WLAN security mode, authorized networks and old-credential rejection tests.
D:A shared broadcast SSID cannot by itself serve as an isolation boundary for different organizations' internal data. The focused check for the reported condition is: Review PSK exposure history, WLAN security mode, authorized networks and old-credential rejection tests.
Question 213
Select TWO appropriate investigation, change, and acceptance elements for this situation. A museum delivers app notifications to visitors near exhibits but has not checked whether guests gave Bluetooth or location permission.
- Display observation freshness explicitly and trigger an investigation when tag transmissions or receiver observations stop.
- Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path.
- Collect and attribute visitor movement despite users explicitly denying Bluetooth access.
- Compare AP serial-to-coordinate map, moved hardware positions, reference tags, RSSI history and measured location errors.
- Inspect mobile app permissions, opt-in events, beacon observations, privacy notice and message history.
Explanation
Correct Answer
B:Acceptance criterion: Opted-in test visitors receive the intended message while those denying permission are not tracked and can browse alternatives. Location-enabled user engagement requires compatible client permissions and permitted use, not only transmitted beacons.
E:Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path. This observation directly isolates the suspected dependency before a risky change.
Incorrect Answers
A:Display observation freshness explicitly and trigger an investigation when tag transmissions or receiver observations stop. This action belongs to a different situation: A hospital uses virtual BLE signals for locating equipment, but the monitoring team confuses last-seen coordinates with confirmed current asset locations. Here the decisive dependency is: Location-enabled user engagement requires compatible client permissions and permitted use, not only transmitted beacons. Use the specified intervention: Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path.
C:Collect and attribute visitor movement despite users explicitly denying Bluetooth access. This shortcut skips or undermines the needed control. Location-enabled user engagement requires compatible client permissions and permitted use, not only transmitted beacons. The required remediation is: Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path.
D:This check investigates a different symptom (A logistics depot relocates several Mist vBLE-enabled APs but leaves the floorplan coordinates unchanged, shifting tracked asset icons to the wrong aisle.). That check tests the actual dependency without guessing at changes.
Question 214
Before changing production, which focused diagnostic is most useful for identifying the true dependency? A university enables multiple PSKs on one WLAN but all users receive identical unrestricted network permissions after authentication. Select the ONE best answer.
- Scan all BSSIDs and RSN settings, compare active WLAN objects, client associations and site template inheritance.
- Inspect guest DNS flow, resolver policy, portal FQDN resolution and pre-auth ACL events.
- Review PSK-to-role mapping, policy evaluation, VLAN assignments and client authorization test outcomes.
- Capture deauth/disassoc subtypes, source BSSIDs, PMF status, client disconnect timestamps and WIDS alerts.
Explanation
Correct Answer
C:Multiple accepted passphrases do not enforce least privilege unless their assigned authorization policies differ as intended. Bind the distinct PSK identities to appropriate supported roles or policies and verify the resulting effective network segmentation. This observation directly isolates the suspected dependency before a risky change.
Incorrect Answers
A:Duplicate branded SSIDs with different protection can confuse client selection and increase downgrade or impersonation risk. The focused check for the reported condition is: Review PSK-to-role mapping, policy evaluation, VLAN assignments and client authorization test outcomes.
B:A captive admission process can deadlock if services necessary to reach the portal are blocked until the portal succeeds. The focused check for the reported condition is: Review PSK-to-role mapping, policy evaluation, VLAN assignments and client authorization test outcomes.
D:Disruptive management-frame activity can degrade service without causing an AP hardware or network link failure. The focused check for the reported condition is: Review PSK-to-role mapping, policy evaluation, VLAN assignments and client authorization test outcomes.
Question 215
Which observed outcome provides the strongest verification for this requirement? A site attempts asset visibility for low-power medical tags but the receiver survey is performed only while all metal partition doors are open. Select the ONE best answer.
- The observed walking path and zone entry times match documented tolerances at multiple reference points.
- Tags are detected within committed limits with typical barriers closed and documented exceptions are addressed.
- A consenting test user receives the approved alert and each event is traceable through delivery logs.
- A verified tag broadcasts correctly and its fresh observations produce accurate supported site location records.
Explanation
Correct Answer
B:Indoor signal attenuation and multipath change with physical obstacles; a one-condition survey may miss operational coverage gaps. It validates the controlled change: Test representative normal operating conditions, including closed barriers and changing equipment layouts, before committing accuracy.
Incorrect Answers
A:Pixel positions alone do not encode real-world distance unless the underlying floorplan geometry is correctly calibrated. This is a different acceptance outcome; the required result here is: Tags are detected within committed limits with typical barriers closed and documented exceptions are addressed.
C:Recording a proximity event and delivering an app notification involve different stages that can fail independently. This is a different acceptance outcome; the required result here is: Tags are detected within committed limits with typical barriers closed and documented exceptions are addressed.
D:An inventory record does not provide physical presence measurements without a compatible and functioning radio signal. This is a different acceptance outcome; the required result here is: Tags are detected within committed limits with typical barriers closed and documented exceptions are addressed.
Question 216
Which evidence-gathering check most directly narrows the cause of this incident? A Marvis Action reports a DHCP client-impact pattern only at the start of each school day while the help desk views one quiet afternoon. Select the ONE best answer.
- Inspect query time range, client first-seen, association events, recorded roaming activity and site timezone.
- Inspect Mini results, RADIUS logs, proposed policy scope, approval records and before-after client joins.
- Inspect Action time range, client join bursts, DHCP utilization, relay messages and morning SLE trends.
- Inspect session counts, client attempt logs, Mini tests, device online status and observation window.
Explanation
Correct Answer
C:Time-bounded and cyclical service defects can be obscured when AI evidence is reviewed outside the relevant interval. Align the Action evidence period with the reported morning session and inspect the resulting onboarding classifier and service logs. This observation directly isolates the suspected dependency before a risky change.
Incorrect Answers
A:An empty historical query does not prove that a later client roaming incident never occurred. The focused check for the reported condition is: Inspect Action time range, client join bursts, DHCP utilization, relay messages and morning SLE trends.
B:Service-testing tools observe conditions; the ability to diagnose does not imply automatic authority to modify access policy. The focused check for the reported condition is: Inspect Action time range, client join bursts, DHCP utilization, relay messages and morning SLE trends.
D:No observed failures can reflect an empty sample rather than proof every onboarding path works. The focused check for the reported condition is: Inspect Action time range, client join bursts, DHCP utilization, relay messages and morning SLE trends.
Question 217
An architect must identify the primary underlying platform behavior. Which explanation is correct? An automation receiver creates two change records after retrying the same Mist webhook notification following an HTTP timeout. Select the ONE best answer.
- Webhook delivery retries can redeliver events; the consumer must recognize already completed work.
- Management-console time presentation does not change when a remote configuration change actually occurred.
- Cloud management tenancy and role governance set the administrative trust boundary before any REST resource creation.
- Software maintenance can interrupt radio service even when the configuration template remains valid after the update.
Explanation
Correct Answer
A:The corresponding supported intervention is: Deduplicate receiver events with stable identifiers and make authorized processing idempotent before acknowledging retries.
Incorrect Answers
B:The alternative governing principle is: Management-console time presentation does not change when a remote configuration change actually occurred. The mechanism tested by the reported case is: Webhook delivery retries can redeliver events; the consumer must recognize already completed work.
C:The alternative governing principle is: Cloud management tenancy and role governance set the administrative trust boundary before any REST resource creation. The mechanism tested by the reported case is: Webhook delivery retries can redeliver events; the consumer must recognize already completed work.
D:The alternative governing principle is: Software maintenance can interrupt radio service even when the configuration template remains valid after the update. The mechanism tested by the reported case is: Webhook delivery retries can redeliver events; the consumer must recognize already completed work.
Question 218
The operator needs proof rather than a guess. Which investigation should come first? A managed AP is moved between floors without changing its site map and administrators believe device coordinates are updated automatically. Select the ONE best answer.
- Examine WLAN forwarding intent, site gateways, required Mist Edge functionality and measured traffic path.
- Inspect AP last-seen, LAN forwarding, DNS and identity reachability, client sessions and site uplink status.
- Compare installation records, AP serial, site map coordinates, RF coverage observations and location event history.
- Inspect AP online status, SSID beacons, EAP events, DHCP outcomes, VLAN routing and test client logs.
Explanation
Correct Answer
C:Cloud inventory and floorplan coordinate data can remain stale even after a powered AP reconnects from a new location. Correct the installed AP's site placement record and validate any affected Wi-Fi or location analytics dependencies. This observation directly isolates the suspected dependency before a risky change.
Incorrect Answers
A:Mist Edge is a design option for suitable tunneled or centralized service functions rather than a universal prerequisite for local bridging. The focused check for the reported condition is: Compare installation records, AP serial, site map coordinates, RF coverage observations and location event history.
B:A managed control plane can lose communication while some configured local data-plane services continue, depending on dependencies. The focused check for the reported condition is: Compare installation records, AP serial, site map coordinates, RF coverage observations and location event history.
D:Add an end-to-end acceptance test from advertised WLAN through authentication, addressing and approved resource access. The focused check for the reported condition is: Compare installation records, AP serial, site map coordinates, RF coverage observations and location event history.
Question 219
Which investigation-and-change plan directly addresses the issue and proves the outcome? One AP generates thousands of identical transient alert notifications after an upstream PoE switch restarts and overwhelms the help desk. Select the ONE best answer.
- Investigate: Verify site selector, client MAC, BSSID, device serial, observation time and site scope. Remediate: Select the correct organization and site and use unique client and BSSID identities to inspect accurate client experience events. Verify: The correct AP and time-bounded call issue appear in the SLE timeline, supporting a targeted repair.
- Investigate: Compare width choices, neighboring-channel reuse, RRM decisions, client traffic and busy-airtime records. Remediate: Evaluate supported channel-width optimization with measured neighboring AP airtime and load instead of prioritizing peak rates. Verify: Peak-time goodput and capacity SLE improve while adjacent-cell overlap stays within measured limits.
- Investigate: Inspect resolver assignments, DNS query timings, SLE classifier, routing and DHCP option configuration. Remediate: Correlate DNS service SLE with DHCP-provided resolver addresses and test the affected DNS server and route. Verify: Clients resolve test names within target latency using the approved resolver without changing unrelated SSID security.
- Investigate: Inspect alert rules, event correlation, upstream switch timestamps, notification delivery and ticket duplication. Remediate: Correlate parent switch faults and device-event groups while keeping distinct critical site alerts and escalation paths. Verify: A controlled switch restart creates one actionable incident group and independent AP faults still notify responders.
Explanation
Correct Answer
D:Alert storms can represent one shared infrastructure failure rather than thousands of unrelated radio incidents. A controlled switch restart creates one actionable incident group and independent AP faults still notify responders.
Incorrect Answers
A:Verify site selector, client MAC, BSSID, device serial, observation time and site scope. Remediate: Select the correct organization and site and use unique client and BSSID identities to inspect accurate client experience events. Verify: The correct AP and time-bounded call issue appear in the SLE timeline, supporting a targeted repair. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Correlate parent switch faults and device-event groups while keeping distinct critical site alerts and escalation paths.
B:Compare width choices, neighboring-channel reuse, RRM decisions, client traffic and busy-airtime records. Remediate: Evaluate supported channel-width optimization with measured neighboring AP airtime and load instead of prioritizing peak rates. Verify: Peak-time goodput and capacity SLE improve while adjacent-cell overlap stays within measured limits. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Correlate parent switch faults and device-event groups while keeping distinct critical site alerts and escalation paths.
C:Inspect resolver assignments, DNS query timings, SLE classifier, routing and DHCP option configuration. Remediate: Correlate DNS service SLE with DHCP-provided resolver addresses and test the affected DNS server and route. Verify: Clients resolve test names within target latency using the approved resolver without changing unrelated SSID security. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Correlate parent switch faults and device-event groups while keeping distinct critical site alerts and escalation paths.
Question 220
Which action directly resolves the core infrastructure requirement without relying on an unrelated workaround? A hospital places two floors on one shared site map without elevation information, leading to equipment that appears to jump between levels. Select the ONE best answer.
- Correct floor assignment, receiver height data and site topology then validate vertical separation with reference assets.
- Display observation freshness explicitly and trigger an investigation when tag transmissions or receiver observations stop.
- Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path.
- Monitor receiver health and qualify affected location accuracy and observation freshness until coverage is restored.
Explanation
Correct Answer
A:Strong radio energy may be heard across floors, and accurate floor-level location requires an appropriate physical model. Acceptance criterion: Tracked equipment remains on the verified floor during repeat tests while nearby other-floor beacons transmit.
Incorrect Answers
B:Display observation freshness explicitly and trigger an investigation when tag transmissions or receiver observations stop. Here the decisive dependency is: Strong radio energy may be heard across floors, and accurate floor-level location requires an appropriate physical model. Use the specified intervention: Correct floor assignment, receiver height data and site topology then validate vertical separation with reference assets.
C:Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path. Here the decisive dependency is: Strong radio energy may be heard across floors, and accurate floor-level location requires an appropriate physical model. Use the specified intervention: Correct floor assignment, receiver height data and site topology then validate vertical separation with reference assets.
D:That option would monitor receiver health and qualify affected location accuracy and observation freshness until coverage is restored, but it addresses a different concern. Strong radio energy may be heard across floors, and accurate floor-level location requires an appropriate physical model.