ISTQB CTFL v4.0 Practice Test 41
Question 400
A tester and product owner review the following behavior: A subscription can move from Pending to Active after payment, yet an erroneous Cancel event is accepted directly from an undefined state. Which THREE elements together describe an appropriate response, independent verification, and demonstrable completion evidence? Select THREE answers.
- Inspect annotated source statement counts or instrumentation and confirm that the previously unexecuted line is reached by a test.
- Build a state model with allowed event-triggered transitions and include selected invalid transitions as well as the happy path.
- Inspect a transition table with initial state, input event, expected next state and observed result for valid and invalid cases.
- The system follows defined legal transitions and rejects events prohibited in the current state without silently changing state.
- Use two-value boundary sets just below and at each inclusive boundary, explicitly testing 9 and 10 at the lower edge and 50 and 51 at the upper edge.
- Assume testing one sequence through the happy path proves that invalid transitions and alternate states are handled correctly.
Explanation
Correct Answers
B:This is the appropriate testing Recommended action: Build a state model with allowed event-triggered transitions and include selected invalid transitions as well as the happy path. The case involves A subscription can move from Pending to Active after payment, yet an erroneous Cancel event is accepted directly from an undefined state.
C:This check addresses the issue: Inspect a transition table with initial state, input event, expected next state and observed result for valid and invalid cases. The test should distinguish observed facts from the assumption that assume testing one sequence through the happy path proves that invalid transitions and alternate states are handled correctly. The intended testing outcome is: The system follows defined legal transitions and rejects events prohibited in the current state without silently changing state.
D:The observable acceptance result is: The system follows defined legal transitions and rejects events prohibited in the current state without silently changing state. It follows from the testing approach: Build a state model with allowed event-triggered transitions and include selected invalid transitions as well as the happy path.
Incorrect Answers
A:This is a misconception related to a different testing issue, namely Statement coverage of a conditional branch, and is not the most direct assumption behind this case. Here, A subscription can move from Pending to Active after payment, yet an erroneous Cancel event is accepted directly from an undefined state.
E:This is a misconception related to a different testing issue, namely Two-value boundary value analysis for inclusive range, and is not the most direct assumption behind this case. Here, A subscription can move from Pending to Active after payment, yet an erroneous Cancel event is accepted directly from an undefined state.
F:This shortcut is unsafe: Assume testing one sequence through the happy path proves that invalid transitions and alternate states are handled correctly. It neglects the relevant behavior: State transition testing targets state-dependent behavior, including correct reactions to events that are invalid in the current state. In this scenario: er review the following behavior: A subscription can move from Pending to Active after payment, yet an erroneous Cancel event is accepted directly from an undefined state.
Question 401
During test preparation, a team encounters the following issue: A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. Which testing action BEST addresses the stated issue? Select ONE best answer.
- Build a state model with allowed event-triggered transitions and include selected invalid transitions as well as the happy path.
- Enumerate candidate condition combinations, identify and justify infeasible combinations, then derive executable tests from feasible rules.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
Explanation
Correct Answer
D:This is the appropriate testing action: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions. The case involves A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
Incorrect Answers
A:This is an appropriate consideration for a different situation (State transition testing allowed and invalid events), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
B:This is an appropriate consideration for a different situation (Decision table infeasible conditions and rule reduction), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
C:That option would assume reaching every state once automatically provides complete state-transition coverage for all defined events, but it addresses a different concern. It follows the principle that Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state.
Question 402
During iteration planning and quality review, this issue appears: A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. Which principle of software testing BEST explains the problem? Select ONE best answer.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Statement coverage measures the proportion of executable statements exercised and does not by itself demonstrate all decisions or outcomes.
- Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state.
- Branch coverage tracks decision outcomes; executing a line in one path does not prove the other branch was taken.
Explanation
Correct Answer
C:This is the relevant underlying rule: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. In the situation described, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
Incorrect Answers
A:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events. It neglects the relevant behavior: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state.
B:This is an appropriate consideration for a different situation (Statement coverage of a conditional branch), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
D:This is an appropriate consideration for a different situation (Branch coverage of both conditional outcomes), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
Question 403
A project team is deciding how to test this condition: A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. Which specific test or review evidence MOST directly establishes what happened? Select ONE best answer.
- Inspect business constraints, each condition combination and the documented basis for omitting infeasible rules from executable coverage.
- Inspect comparison operators, permitted precision and test cases immediately below, at and above the effective threshold.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
Explanation
Correct Answer
D:This directly verifies the issue: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges. The test should distinguish observed facts from the assumption that assume reaching every state once automatically provides complete state-transition coverage for all defined events.
Incorrect Answers
A:This is an appropriate consideration for a different situation (Decision table infeasible conditions and rule reduction), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
B:This is an appropriate consideration for a different situation (Boundary analysis with decimal precision and open limits), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
C:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events. It neglects the relevant behavior: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. For the scenario (A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.), the required evidence is: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
Question 404
A foundation-level tester investigates: A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. Which observed result BEST demonstrates that the testing activity met its stated objective? Select ONE best answer.
- The selected tests provide both code-path evidence and explicit expected outcomes tied to the external test basis.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Every important independent class and necessary interaction appears in at least one interpretable test case.
- Each targeted valid edge is exercised and any stated transition coverage claim is supported by corresponding event evidence.
Explanation
Correct Answer
D:This is the observable acceptance result: Each targeted valid edge is exercised and any stated transition coverage claim is supported by corresponding event evidence. It follows from the testing approach: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
Incorrect Answers
A:This is an appropriate consideration for a different situation (White-box coverage limits and black-box complement), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
B:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
C:This is an appropriate consideration for a different situation (Multiple-input equivalence classes without exhaustive product), but it does not directly resolve the one given here. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
Question 405
A test analyst considers this real project scenario: A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions. Which misleading assumption about transition coverage versus state coverage MOST directly contributes to this problem and should be rejected? Select ONE best answer.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Assume testing one sequence through the happy path proves that invalid transitions and alternate states are handled correctly.
- Assume testing only both-true and both-false combinations fully covers the behavior of two independent Boolean conditions.
- Assume several examples from the valid age range provide coverage of both invalid equivalence partitions.
Explanation
Correct Answer
A:The correct principle is: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state.
Incorrect Answers
B:This is a misconception related to a different testing issue, namely State transition testing allowed and invalid events, and is not the most direct assumption behind this case. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
C:This is a misconception related to a different testing issue, namely Decision table complete rule combination coverage, and is not the most direct assumption behind this case. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
D:This is a misconception related to a different testing issue, namely Equivalence partitioning valid and invalid classes, and is not the most direct assumption behind this case. Here, A four-state order workflow visits each status during one normal sequence but does not exercise its cancel and retry transitions.
Question 406
In a software test-design exercise, the following case arises: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. Which testing action BEST addresses the stated issue? Select ONE best answer.
- Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
- Construct a two-condition decision table covering all four possible true and false combinations and the expected action for each rule.
- Select tests that force both true and false outcomes for relevant decisions and measure each executable branch outcome.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
Explanation
Correct Answer
A:This is the appropriate testing action: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions. The case involves A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
Incorrect Answers
B:This is an appropriate consideration for a different situation (Decision table complete rule combination coverage), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
C:This is an appropriate consideration for a different situation (Branch coverage of both conditional outcomes), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
D:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events. It neglects the relevant behavior: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. For the scenario (A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.), the required evidence is: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
Question 407
A release manager requests independent testing evidence: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. Which principle of software testing BEST explains the problem? Select ONE best answer.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Three-value BVA covers the boundary and its immediately adjacent values on both sides, including valid and invalid values.
- Two-value boundary analysis targets adjacent values across each relevant transition where behavior is most likely to differ.
- Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state.
Explanation
Correct Answer
D:This is the relevant underlying rule: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. In the situation described, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
Incorrect Answers
A:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events. For the scenario (A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.), the required evidence is: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
B:This is an appropriate consideration for a different situation (Three-value boundary value analysis around each edge), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
C:This is an appropriate consideration for a different situation (Two-value boundary value analysis for inclusive range), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
Question 408
A software quality workshop reviews this situation: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. Which specific test or review evidence MOST directly establishes what happened? Select ONE best answer.
- Inspect annotated source statement counts or instrumentation and confirm that the previously unexecuted line is reached by a test.
- Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- Inspect a transition table with initial state, input event, expected next state and observed result for valid and invalid cases.
Explanation
Correct Answer
B:This check addresses the issue: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges. The test should distinguish observed facts from the assumption that assume reaching every state once automatically provides complete state-transition coverage for all defined events.
Incorrect Answers
A:This is an appropriate consideration for a different situation (Statement coverage of a conditional branch), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
C:It neglects the relevant behavior: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. For the scenario (A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.), the required evidence is: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
D:This is an appropriate consideration for a different situation (State transition testing allowed and invalid events), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
Question 409
A defect investigation documents this situation: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. Which observed result BEST demonstrates that the testing activity met its stated objective? Select ONE best answer.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
- The selected tests provide both code-path evidence and explicit expected outcomes tied to the external test basis.
- Each targeted valid edge is exercised and any stated transition coverage claim is supported by corresponding event evidence.
- Boundary cases distinguish the first accepted representable value from the excluded endpoint for the actual numeric domain.
Explanation
Correct Answer
C:This is the observable acceptance result: Each targeted valid edge is exercised and any stated transition coverage claim is supported by corresponding event evidence. It follows from the testing approach: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions. The case is: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
Incorrect Answers
A:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events. It neglects the relevant behavior: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. In this scenario: gation documents this situation: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
B:This is an appropriate consideration for a different situation (White-box coverage limits and black-box complement), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
D:This is an appropriate consideration for a different situation (Boundary analysis with decimal precision and open limits), but it does not directly resolve the one given here. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. The necessary control or test is: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
Question 410
A tester and product owner review the following behavior: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception. Which TWO complementary steps together provide the most appropriate response and a direct test of its effectiveness? Select TWO answers.
- Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions.
- Partition the input into age below 18, age 18 through 65, and age above 65, then choose representative tests from each class.
- Inspect structural coverage alongside traceability to documented outputs, edge conditions and quality constraints not encoded in control flow.
- Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges.
- Assume reaching every state once automatically provides complete state-transition coverage for all defined events.
Explanation
Correct Answers
A:This is the appropriate testing Recommended action: Track state coverage and transition coverage separately, selecting additional event sequences to exercise missing valid transitions. The case involves A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
D:This check addresses the issue: Compare the transition graph and visited state list with executed ordered state-event pairs and identify uncovered edges. The test should distinguish observed facts from the assumption that assume reaching every state once automatically provides complete state-transition coverage for all defined events. The intended testing outcome is: Each targeted valid edge is exercised and any stated transition coverage claim is supported by corresponding event evidence.
Incorrect Answers
B:This is a misconception related to a different testing issue, namely Equivalence partitioning valid and invalid classes, and is not the most direct assumption behind this case. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
C:This is a misconception related to a different testing issue, namely White-box coverage limits and black-box complement, and is not the most direct assumption behind this case. Here, A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.
E:This shortcut is unsafe: Assume reaching every state once automatically provides complete state-transition coverage for all defined events. It neglects the relevant behavior: Visiting every state does not imply exercising every transition, because multiple events and edges can lead into or out of the same state. In this scenario: r review the following behavior: A notification engine reports 100 percent state coverage while a rarely used transition from Failed to Retrying still throws an exception.