ISTQB CTFL v4.0 Practice Test 11
Question 100
During test preparation, a team encounters the following issue: A finance test environment shares production-like customer data whose setup steps were never versioned or documented. Which THREE elements together describe an appropriate response, independent verification, and demonstrable completion evidence? Select THREE answers.
- Version and identify test cases, data, harnesses, expected results and environment baselines as controlled testware.
- Assume a test script alone is all the testware required and that uncontrolled edits cannot change testing conclusions.
- Compare repository revisions, test data provenance, environment build identifiers and the artifacts linked to each run.
- A failing or passing test can be reproduced against a known version of its testware and environment configuration.
- Analyze the test basis to identify testable conditions, then design coverage items and concrete cases from those conditions before execution.
- Preserve the failed input and actual output, the developer diagnosis, patch reference and rerun of the exact original failure scenario.
Explanation
Correct Answers
A:This is the appropriate testing Recommended action: Version and identify test cases, data, harnesses, expected results and environment baselines as controlled testware. The case involves A finance test environment shares production-like customer data whose setup steps were never versioned or documented.
C:This check addresses the issue: Compare repository revisions, test data provenance, environment build identifiers and the artifacts linked to each run. The test should distinguish observed facts from the assumption that assume a test script alone is all the testware required and that uncontrolled edits cannot change testing conclusions. The intended testing outcome is: A failing or passing test can be reproduced against a known version of its testware and environment configuration.
D:The observable acceptance result is: A failing or passing test can be reproduced against a known version of its testware and environment configuration. It follows from the testing approach: Version and identify test cases, data, harnesses, expected results and environment baselines as controlled testware.
Incorrect Answers
B:This shortcut is unsafe: Assume a test script alone is all the testware required and that uncontrolled edits cannot change testing conclusions. It neglects the relevant behavior: Testware consists of artifacts produced by testing and needs consistent ownership and configuration to support repeatable execution. In this scenario: t preparation, a team encounters the following issue: A finance test environment shares production-like customer data whose setup steps were never versioned or documented.
E:This is a misconception related to a different testing issue, namely Distinguishing test analysis and test design, and is not the most direct assumption behind this case. Here, A finance test environment shares production-like customer data whose setup steps were never versioned or documented.
F:This is a misconception related to a different testing issue, namely Testing and debugging as distinct activities, and is not the most direct assumption behind this case. Here, A finance test environment shares production-like customer data whose setup steps were never versioned or documented.
Question 101
During iteration planning and quality review, this issue appears: The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. Which testing action BEST addresses the stated issue? Select ONE best answer.
- Separate the human error, resulting work-product defect, observed execution failure and underlying cause before prioritizing preventive changes.
- Record reproducible failure evidence in testing, then let debugging locate and correct the cause, followed by confirmation testing of the fix.
- Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Explanation
Correct Answer
C:This is the appropriate testing action: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact. The case involves The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
Incorrect Answers
A:This is an appropriate consideration for a different situation (Error defect failure and root cause chain), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
B:This is an appropriate consideration for a different situation (Testing and debugging as distinct activities), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
D:That option would assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis, but it addresses a different concern. It follows the principle that Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements.
Question 102
A project team is deciding how to test this condition: The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. Which principle of software testing BEST explains the problem? Select ONE best answer.
- An error is a human action, a defect is a flaw in a work product, and a failure is externally observable deviation caused when a defect is exercised.
- Testing is performed through roles and tasks; clear responsibility and communication prevent ambiguity about evidence, approval and correction.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
- Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements.
Explanation
Correct Answer
D:This is the relevant underlying rule: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements. In the situation described, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
Incorrect Answers
A:This is an appropriate consideration for a different situation (Error defect failure and root cause chain), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
B:This is an appropriate consideration for a different situation (Test roles and collaborative ownership), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
C:That option would assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis, but it addresses a different concern. The practical response is to maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
Question 103
A foundation-level tester investigates: The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. Which specific test or review evidence MOST directly establishes what happened? Select ONE best answer.
- Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
- Compare the stated test objectives with acceptance criteria, risk exposures, open findings and evidence from completed test activities.
- Compare repository revisions, test data provenance, environment build identifiers and the artifacts linked to each run.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Explanation
Correct Answer
A:This directly verifies the issue: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect. The test should distinguish observed facts from the assumption that assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Incorrect Answers
B:This is an appropriate consideration for a different situation (Testing objectives tied to decision-making), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
C:This is an appropriate consideration for a different situation (Testware inventory and configuration), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
D:This shortcut is unsafe: Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis. It neglects the relevant behavior: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements.
Question 104
A test analyst considers this real project scenario: The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. Which observed result BEST demonstrates that the testing activity met its stated objective? Select ONE best answer.
- Decision makers receive an evidence-based account of what was tested, what remains uncertain and which release risks are accepted.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
- Coverage gaps and affected regression tests are identified reliably when a requirement or work product changes.
- The chosen set targets important behavior and residual untested risks are visible to decision makers within the allocated time.
Explanation
Correct Answer
C:This is the observable acceptance result: Coverage gaps and affected regression tests are identified reliably when a requirement or work product changes. It follows from the testing approach: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
Incorrect Answers
A:This is an appropriate consideration for a different situation (Testing objectives tied to decision-making), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
B:This shortcut is unsafe: Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis. It neglects the relevant behavior: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements. For the scenario (The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.), the required evidence is: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
D:This is an appropriate consideration for a different situation (Exhaustive testing impossibility and selection), but it does not directly resolve the one given here. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
Question 105
In a software test-design exercise, the following case arises: The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen. Which misleading assumption about bidirectional traceability of tests and requirements MOST directly contributes to this problem and should be rejected? Select ONE best answer.
- Assume designed cases can be executed reliably with no setup, result recording or completion activities.
- Assume a sufficiently determined tester can always enumerate every possible combination in realistic software, so prioritization is unnecessary.
- Assume running the same passing tests forever guarantees sustained fault detection and that zero defects means a useful product.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Explanation
Correct Answer
D:The correct principle is: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements.
Incorrect Answers
A:This is a misconception related to a different testing issue, namely Test implementation execution and completion, and is not the most direct assumption behind this case. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
B:This is a misconception related to a different testing issue, namely Exhaustive testing impossibility and selection, and is not the most direct assumption behind this case. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
C:This is a misconception related to a different testing issue, namely Pesticide paradox and absence of errors fallacy, and is not the most direct assumption behind this case. Here, The release report claims a safety requirement is covered, but its listed test identifier refers to an unrelated screen.
Question 106
A release manager requests independent testing evidence: After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. Which testing action BEST addresses the stated issue? Select ONE best answer.
- Separate the human error, resulting work-product defect, observed execution failure and underlying cause before prioritizing preventive changes.
- Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
- Analyze the test basis to identify testable conditions, then design coverage items and concrete cases from those conditions before execution.
Explanation
Correct Answer
B:This is the appropriate testing action: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact. The case involves After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
Incorrect Answers
A:This is an appropriate consideration for a different situation (Error defect failure and root cause chain), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
C:This shortcut is unsafe: Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis. It neglects the relevant behavior: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements. For the scenario (After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.), the required evidence is: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
D:This is an appropriate consideration for a different situation (Distinguishing test analysis and test design), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
Question 107
A software quality workshop reviews this situation: After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. Which principle of software testing BEST explains the problem? Select ONE best answer.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
- Except for trivial cases, exhaustive testing is infeasible; systematic selection and risk-based prioritization are needed under finite resources.
- Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements.
- Testing is performed through roles and tasks; clear responsibility and communication prevent ambiguity about evidence, approval and correction.
Explanation
Correct Answer
C:This is the relevant underlying rule: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements. In the situation described, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
Incorrect Answers
A:This shortcut is unsafe: Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
B:This is an appropriate consideration for a different situation (Exhaustive testing impossibility and selection), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
D:This is an appropriate consideration for a different situation (Test roles and collaborative ownership), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
Question 108
A defect investigation documents this situation: After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. Which specific test or review evidence MOST directly establishes what happened? Select ONE best answer.
- Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
- Inspect responsibility assignments, decisions about acceptance, defect ownership and records showing who verified each outcome.
- Inspect the input-space estimate, selected partitions, affected risks, boundary coverage and the rationalized untested combinations.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Explanation
Correct Answer
A:This check addresses the issue: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect. The test should distinguish observed facts from the assumption that assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Incorrect Answers
B:This is an appropriate consideration for a different situation (Test roles and collaborative ownership), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
C:This is an appropriate consideration for a different situation (Exhaustive testing impossibility and selection), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
D:This shortcut is unsafe: Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis. For the scenario (After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.), the required evidence is: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
Question 109
A tester and product owner review the following behavior: After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. Which observed result BEST demonstrates that the testing activity met its stated objective? Select ONE best answer.
- Coverage gaps and affected regression tests are identified reliably when a requirement or work product changes.
- The cases address every prioritized condition and the team can explain why each expected result demonstrates the rule.
- The same observable behavior and expected result are understood across roles and blockers are resolved through evidence.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
Explanation
Correct Answer
A:This is the observable acceptance result: Coverage gaps and affected regression tests are identified reliably when a requirement or work product changes. It follows from the testing approach: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact. The case is: After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
Incorrect Answers
B:This is an appropriate consideration for a different situation (Distinguishing test analysis and test design), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
C:This is an appropriate consideration for a different situation (Whole-team quality approach and effective communication), but it does not directly resolve the one given here. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. The necessary control or test is: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
D:It neglects the relevant behavior: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements. For the scenario (After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.), the required evidence is: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
Question 110
During test preparation, a team encounters the following issue: After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered. Which TWO complementary steps together provide the most appropriate response and a direct test of its effectiveness? Select TWO answers.
- Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect.
- Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis.
- Record reproducible failure evidence in testing, then let debugging locate and correct the cause, followed by confirmation testing of the fix.
- Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact.
- Inspect responsibility assignments, decisions about acceptance, defect ownership and records showing who verified each outcome.
Explanation
Correct Answers
A:This check addresses the issue: Follow one requirement into selected tests and results, then follow a failing test back to its requirement and linked defect. The test should distinguish observed facts from the assumption that assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis. The intended testing outcome is: Coverage gaps and affected regression tests are identified reliably when a requirement or work product changes.
D:This is the appropriate testing Recommended action: Maintain bidirectional links among requirements, risk conditions, test cases, execution outcomes and defects, using them for change impact. The case involves After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
Incorrect Answers
B:This shortcut is unsafe: Assume a count of test cases proves requirement coverage even when no trace exists between the cases and the test basis. It neglects the relevant behavior: Traceability enables coverage evaluation, change impact analysis and explanation of why particular testing evidence supports requirements. In this scenario: During test preparation, a team encounters the following issue: After a pricing rule changes, the tester cannot tell.
C:This is a misconception related to a different testing issue, namely Testing and debugging as distinct activities, and is not the most direct assumption behind this case. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.
E:This is a misconception related to a different testing issue, namely Test roles and collaborative ownership, and is not the most direct assumption behind this case. Here, After a pricing rule changes, the tester cannot tell which tests or previous defects must be reconsidered.