cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 8

Question 70

One upstream switch loses power and all child switches disappear from the FortiGate management screen. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.
  2. Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.
  3. Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.
  4. Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity.

Explanation

Correct Answer

C:

Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status. A FortiGate controls each FortiSwitch through the managed Layer-2 topology, but downstream reachability depends on upstream FortiLink links. The paired action is: Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards.

Incorrect Answers

A:

Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. These observations are applicable to FortiLink discovery failure and physical uplink path, but would not isolate the main failure first. The decisive evidence is: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

B:

Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. These observations are applicable to FortiLink transport over nontrivial L2 or L3 paths, but would not isolate the main failure first. The decisive evidence is: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

D:

Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity. These observations are applicable to HA FortiGate pair managing switch topology, but would not isolate the main failure first. The decisive evidence is: Check managed tree, ISL link health, model compatibility, VLAN carriage, depth limitations and upstream aggregate status.

Question 71

A distribution uplink carries VLAN 40 locally but the peer excludes VLAN 40 from its allowed list. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated.
  2. Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path.
  3. The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.
  4. An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

Explanation

Correct Answer

D:

An access host receives the right subnet while only approved tagged VLANs traverse the uplink. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage.

Incorrect Answers

A:

The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated. This result relates to VLAN access isolation and troubleshooting of membership, not the acceptance condition under test. The relevant result is: An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

B:

Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path. This result relates to STP incident recovery with MAC flap evidence, not the acceptance condition under test. The relevant result is: An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

C:

The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart. This result relates to Managed switch configuration synchronization, not the acceptance condition under test. The relevant result is: An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

Question 72

A redundant uplink stops receiving expected BPDUs and becomes a potential loop hazard. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims.
  2. Select a consistent supported MSTP region and intentional root-bridge placement for loop-free L2 redundancy.
  3. Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.
  4. A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.
  5. Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

Explanation

Correct Answers

A:

Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Root guard and loop guard mitigate different failure cases and should not be enabled indiscriminately on every uplink. Verify the action with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log. Root guard and loop guard mitigate different failure cases and should not be enabled indiscriminately on every uplink. The paired action is: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Select a consistent supported MSTP region and intentional root-bridge placement for loop-free L2 redundancy. This step concerns MSTP region consistency and designated root and is not part of the required paired solution. The correct action and evidence are: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Together with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

C:

Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway. This step concerns FortiSwitch SVI routing and connected routes and is not part of the required paired solution. The correct action and evidence are: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Together with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

D:

A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic. This step concerns FortiSwitch local packet-capture profile and filters and is not part of the required paired solution. The correct action and evidence are: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Together with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

Question 73

A new VLAN is mapped into a different MST instance on one switch and topology behavior diverges. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs.
  2. A planned alternate link remains blocked and takes over predictably without a broadcast storm.
  3. The expected known switch becomes authorized and synchronizes without accepting an unrelated device.
  4. A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration.

Explanation

Correct Answer

B:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. Different MST configuration identifiers split regions even if switch ports are physically connected.

Incorrect Answers

A:

Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs. This result relates to BPDU guard on endpoint-facing ports, not the acceptance condition under test. The relevant result is: A planned alternate link remains blocked and takes over predictably without a broadcast storm.

C:

The expected known switch becomes authorized and synchronizes without accepting an unrelated device. This result relates to Controller authorization and pending-switch state, not the acceptance condition under test. The relevant result is: A planned alternate link remains blocked and takes over predictably without a broadcast storm.

D:

A rogue root candidate is blocked or a looped path remains safely contained without wiping all STP configuration. This result relates to Root guard and loop guard failure response, not the acceptance condition under test. The relevant result is: A planned alternate link remains blocked and takes over predictably without a broadcast storm.

Question 74

A client cannot reach DHCP and an analyst captures a trunk that does not carry that client VLAN. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The analyzer receives the intended copies while production forwarding remains unchanged.
  2. A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.
  3. A moved device is traced to its current approved port and incorrect cross-connection is identified.
  4. A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.

Explanation

Correct Answer

D:

A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port.

Incorrect Answers

A:

The analyzer receives the intended copies while production forwarding remains unchanged. This result relates to FortiSwitch port mirroring to network analyzer, not the acceptance condition under test. The relevant result is: A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.

B:

A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops. This result relates to FortiLink split-interface and standby path design, not the acceptance condition under test. The relevant result is: A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.

C:

A moved device is traced to its current approved port and incorrect cross-connection is identified. This result relates to LLDP and MAC forwarding table extraction, not the acceptance condition under test. The relevant result is: A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.

Question 75

An HA failover succeeds for firewall traffic while downstream switch management disconnects because standby wiring is incomplete. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.
  2. Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity.
  3. Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.
  4. Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility.

Explanation

Correct Answer

B:

Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity. FortiGate HA design and FortiSwitch stacking/MCLAG are separate mechanisms; their failure paths must both be evaluated. The paired action is: Plan FortiLink management under FortiGate HA with supported links, peer roles and deterministic failover tests.

Incorrect Answers

A:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. These observations are applicable to Port MAC learning-limit and violation controls, but would not isolate the main failure first. The decisive evidence is: Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity.

C:

Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing. These observations are applicable to Firmware and lifecycle preparation for FortiSwitch, but would not isolate the main failure first. The decisive evidence is: Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity.

D:

Review discovered/authorized controller inventory, switch serial, link state, approval method, reboot status and firmware compatibility. These observations are applicable to Discovered versus authorized FortiSwitch state, but would not isolate the main failure first. The decisive evidence is: Inspect primary/secondary FortiGate roles, HA health, FortiLink uplinks, downstream switch topology and session continuity.

Question 76

An unknown switch appears discovered after a contractor accidentally connected equipment to the FortiLink port. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.
  2. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  3. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.
  4. Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.

Explanation

Correct Answer

B:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. Verify the action with: Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode.

Incorrect Answers

A:

Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. This action is relevant to FortiLink control and client VLAN transport separation, not the controlling requirement in this case. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. The targeted response is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

C:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. This action is relevant to Port MAC learning-limit and violation controls, not the controlling requirement in this case. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The targeted response is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

D:

Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. This action is relevant to FortiLink discovery failure and physical uplink path, not the controlling requirement in this case. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. The targeted response is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

Question 77

A field engineer uses standalone CLI instructions on a FortiGate-managed switch and its interface settings revert. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it.
  2. Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies.
  3. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  4. Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support.
  5. Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

Explanation

Correct Answers

B:

Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. Direct edits on a managed switch can be overridden; standalone configuration must be maintained and backed up independently. Verify the action with: Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support. This is the configuration or remediation half of the requested TWO-step pair.

D:

Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support. Direct edits on a managed switch can be overridden; standalone configuration must be maintained and backed up independently. The paired action is: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Configure supported IGMP snooping and querier expectations to forward multicast only where receivers request it. This step concerns IGMP snooping and multicast receivers and is not part of the required paired solution. The correct action and evidence are: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. Together with: Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support.

C:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This step concerns FortiGate VDOM-based FortiSwitch tenant assignment and is not part of the required paired solution. The correct action and evidence are: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. Together with: Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support.

E:

Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters. This step concerns LACP negotiation on FortiSwitch FortiLink trunks and is not part of the required paired solution. The correct action and evidence are: Determine whether a switch is managed by FortiGate or standalone before setting interfaces, routes or admin policies. Together with: Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support.

Question 78

A firewall analyst captures only the routed interface while the failure occurs between two hosts in one switch VLAN. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The analyzer receives the intended copies while production forwarding remains unchanged.
  2. Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications.
  3. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.
  4. Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers.

Explanation

Correct Answer

C:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere.

Incorrect Answers

A:

The analyzer receives the intended copies while production forwarding remains unchanged. This result relates to FortiSwitch port mirroring to network analyzer, not the acceptance condition under test. The relevant result is: FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.

B:

Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications. This result relates to Capture and confidentiality limits in incident response, not the acceptance condition under test. The relevant result is: FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.

D:

Runaway flooding is contained without blocking legitimate broadcast-based onboarding or multicast subscribers. This result relates to Storm-control thresholds and broadcast containment, not the acceptance condition under test. The relevant result is: FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.

Question 79

A standby FortiLink port never takes over because its intended peer and discovery state were not prepared. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test.
  2. Check managed topology view, controller switch state, ISL port counters, peer LLDP and suspected link events.
  3. Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.
  4. Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

Explanation

Correct Answer

C:

Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation. The paired action is: Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior.

Incorrect Answers

A:

Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test. These observations are applicable to RADIUS change of authorization and applied session policy, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

B:

Check managed topology view, controller switch state, ISL port counters, peer LLDP and suspected link events. These observations are applicable to Stack failure isolation and switch-to-switch port roles, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

D:

Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes. These observations are applicable to Voice and data VLAN separation on shared access ports, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

Question 80

After an unmanaged bridge is added, the same endpoint MAC repeatedly moves between ports and the team checks only DHCP leases. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.
  2. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.
  3. Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.
  4. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Explanation

Correct Answer

C:

Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map. LLDP provides adjacent-device identity, while MAC learning maps forwarding; neither is a full routed trace by itself. The paired action is: Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths.

Incorrect Answers

A:

Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes. These observations are applicable to Voice and data VLAN separation on shared access ports, but would not isolate the main failure first. The decisive evidence is: Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.

B:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.

D:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. These observations are applicable to FortiLink control and client VLAN transport separation, but would not isolate the main failure first. The decisive evidence is: Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests