cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 10

Question 90

A contractor requests a full week of unfiltered packet data from a production finance VLAN to diagnose one DHCP issue. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  2. Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.
  3. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.
  4. Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

Explanation

Correct Answer

D:

Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions. A packet-capture tool may record payloads and credentials, so evidence handling is part of the network security process. The paired action is: Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics.

Incorrect Answers

A:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. These observations are applicable to FortiSwitch local packet-capture profile and filters, but would not isolate the main failure first. The decisive evidence is: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

B:

Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests. These observations are applicable to Multi-tenant change verification and rollback, but would not isolate the main failure first. The decisive evidence is: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

C:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. These observations are applicable to FortiLink control and client VLAN transport separation, but would not isolate the main failure first. The decisive evidence is: Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.

Question 91

A downstream switch advertises a superior bridge ID and tries to become campus root unexpectedly. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching.
  2. An unexpected additional device is restricted or signaled without knocking out approved business equipment.
  3. Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims.
  4. Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.
  5. Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

Explanation

Correct Answers

C:

Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Root guard and loop guard mitigate different failure cases and should not be enabled indiscriminately on every uplink. Verify the action with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log. This is the configuration or remediation half of the requested TWO-step pair.

D:

Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log. Root guard and loop guard mitigate different failure cases and should not be enabled indiscriminately on every uplink. The paired action is: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. This step concerns BPDU guard on endpoint-facing ports and is not part of the required paired solution. The correct action and evidence are: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Together with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

B:

An unexpected additional device is restricted or signaled without knocking out approved business equipment. This step concerns Port MAC learning-limit and violation controls and is not part of the required paired solution. The correct action and evidence are: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Together with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

E:

Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path. This step concerns FortiLink split-interface and standby path design and is not part of the required paired solution. The correct action and evidence are: Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. Together with: Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

Question 92

Two phones receive different QoS hints after being attached to ports using different LLDP profiles. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority.
  2. Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency.
  3. Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.
  4. Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.
  5. Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

Explanation

Correct Answers

A:

Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. Verify the action with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. This is the configuration or remediation half of the requested TWO-step pair.

E:

Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. The paired action is: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency. This step concerns Egress priority scheduling and congestion visibility and is not part of the required paired solution. The correct action and evidence are: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. Together with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

C:

Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. This step concerns QoS ingress classification and trust boundaries and is not part of the required paired solution. The correct action and evidence are: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. Together with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

D:

Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution. This step concerns Dynamic ARP inspection with DHCP snooping bindings and is not part of the required paired solution. The correct action and evidence are: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. Together with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

Question 93

A mispatched access switch creates a broadcast storm that saturates multiple closets. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.
  2. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.
  3. Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols.
  4. Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges.

Explanation

Correct Answer

C:

Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. Overaggressive storm control can break DHCP, ARP or group discovery even when physical links remain healthy. Verify the action with: Inspect frame-rate counters by class, threshold configuration, affected VLANs and protocol health under controlled load.

Incorrect Answers

A:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This action is relevant to Power over Ethernet port controls and budgets, not the controlling requirement in this case. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The targeted response is: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols.

B:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. This action is relevant to Port MAC learning-limit and violation controls, not the controlling requirement in this case. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The targeted response is: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols.

D:

Use supported dynamic ARP inspection with valid switch bindings to reject spoofed IP-MAC claims at untrusted edges. This action is relevant to Dynamic ARP inspection with DHCP snooping bindings, not the controlling requirement in this case. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices. The targeted response is: Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols.

Question 94

During large file copies, VoIP packets share a congested best-effort queue and experience jitter. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic.
  2. Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.
  3. Validate the supported PoE budget and LLDP-MED endpoint power negotiation rather than equating link up with adequate wattage.
  4. Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

Explanation

Correct Answer

A:

Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic. QoS prioritizes scarce link capacity but cannot create bandwidth beyond the physical egress rate. Verify the action with: Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency.

Incorrect Answers

B:

Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. This action is relevant to FortiLink discovery failure and physical uplink path, not the controlling requirement in this case. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. The targeted response is: Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic.

C:

Validate the supported PoE budget and LLDP-MED endpoint power negotiation rather than equating link up with adequate wattage. This action is relevant to PoE and LLDP-MED endpoint power coordination, not the controlling requirement in this case. Port count and Ethernet link state do not guarantee sufficient power for high-draw endpoints. The targeted response is: Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic.

D:

Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records. This action is relevant to LLDP neighbor discovery and location information, not the controlling requirement in this case. LLDP is an L2 discovery protocol and cannot prove the whole routed service path or phone emergency-location correctness by itself. The targeted response is: Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic.

Question 95

An operator puts a VLAN under a WAN interface instead of the FortiLink interface used by the branch switches. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  2. Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.
  3. Both ends connect at compatible rates with stable errors and required throughput.
  4. The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change.

Explanation

Correct Answer

A:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct.

Incorrect Answers

B:

Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution. This result relates to Dynamic ARP inspection with DHCP snooping bindings, not the acceptance condition under test. The relevant result is: The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.

C:

Both ends connect at compatible rates with stable errors and required throughput. This result relates to Switch port speed and duplex commissioning, not the acceptance condition under test. The relevant result is: The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.

D:

The intended VLAN survives a switch restart without unexpected controller overwrite or unauthorized local change. This result relates to VLAN configuration persistence and drift control, not the acceptance condition under test. The relevant result is: The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.

Question 96

A badge printer cannot run an EAP supplicant and is given an unrestricted staff VLAN rather than a limited MAC-auth profile. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.
  2. Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards.
  3. Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs.
  4. Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

Explanation

Correct Answer

D:

Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN. A MAC address can be cloned; MAC authentication must be combined with appropriate segmentation and monitoring. The paired action is: Use supported MAC-based access controls with narrow authorized device roles and avoid treating MAC addresses as strong identity proof.

Incorrect Answers

A:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. These observations are applicable to Port MAC learning-limit and violation controls, but would not isolate the main failure first. The decisive evidence is: Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

B:

Inspect MCLAG peer group, peer-link status, LACP members, VLAN consistency and split-brain safeguards. These observations are applicable to MCLAG multichassis access redundancy, but would not isolate the main failure first. The decisive evidence is: Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

C:

Inspect ARP inspection status, DHCP snooping binding database, source MAC/IP, trusted ports and violation logs. These observations are applicable to Dynamic ARP inspection with DHCP snooping bindings, but would not isolate the main failure first. The decisive evidence is: Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

Question 97

A switch shows repeated FortiLink disconnects after a configuration push and the team reads only client DHCP logs. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate.
  2. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.
  3. The analyzer receives the intended copies while production forwarding remains unchanged.
  4. A controlled failure test restores approved management and access connectivity through the designed redundant path.

Explanation

Correct Answer

A:

The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate. A log message without source device, time and relevant state is not adequate to prove root cause.

Incorrect Answers

B:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. This result relates to DHCP snooping trust-boundary enforcement, not the acceptance condition under test. The relevant result is: The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate.

C:

The analyzer receives the intended copies while production forwarding remains unchanged. This result relates to FortiSwitch port mirroring to network analyzer, not the acceptance condition under test. The relevant result is: The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate.

D:

A controlled failure test restores approved management and access connectivity through the designed redundant path. This result relates to FortiLink HA and MCLAG topology faults, not the acceptance condition under test. The relevant result is: The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate.

Question 98

All phones lose leases after the uplink carrying approved DHCP offers was marked untrusted. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.
  2. Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable.
  3. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.
  4. Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy.

Explanation

Correct Answer

C:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. Trusting every port defeats DHCP snooping and wrongly distrusting the server uplink may suppress all leases.

Incorrect Answers

A:

A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic. This result relates to FortiSwitch local packet-capture profile and filters, not the acceptance condition under test. The relevant result is: Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.

B:

Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable. This result relates to DHCP server allowlist and Option 82 validation, not the acceptance condition under test. The relevant result is: Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.

D:

Unauthorized source IP packets fail while an approved host continues using its assigned IP and address policy. This result relates to IPv4 source guard and binding-based packet filtering, not the acceptance condition under test. The relevant result is: Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.

Question 99

A monitoring host receives no packets because the chosen mirror direction captures only ingress while the failing frames are egress. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.
  2. Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.
  3. Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.
  4. Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.

Explanation

Correct Answer

D:

Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings. A mirrored stream is passive evidence and can be incomplete if analyzer bandwidth is lower than the observed traffic. Verify the action with: Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.

Incorrect Answers

A:

Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. This action is relevant to Capture-based DHCP and ARP path isolation, not the controlling requirement in this case. A DHCP lease failure can originate at the client, switch, relay or server; capturing at one side alone is not always conclusive. The targeted response is: Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.

B:

Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. This action is relevant to FortiLink discovery failure and physical uplink path, not the controlling requirement in this case. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. The targeted response is: Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.

C:

Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover. This action is relevant to FortiSwitch native VLAN versus allowed VLANs, not the controlling requirement in this case. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage. The targeted response is: Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.

Question 100

A provider configures S-VLAN on a tenant VDOM rather than the VDOM where its FortiLink parent exists. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.
  2. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  3. Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.
  4. Routes and interfaces are configured at the appropriate control plane and persist after synchronization or reboot.

Explanation

Correct Answer

C:

Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision. QinQ layering and VDOM assignment are separate controls; wrong outer tagging can mix customers even when inner VLAN IDs differ.

Incorrect Answers

A:

Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation. This result relates to Shared port multi-VDOM policy boundaries, not the acceptance condition under test. The relevant result is: Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.

B:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This result relates to FortiGate VDOM-based FortiSwitch tenant assignment, not the acceptance condition under test. The relevant result is: Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.

D:

Routes and interfaces are configured at the appropriate control plane and persist after synchronization or reboot. This result relates to FortiSwitch standalone versus FortiLink managed L3 ownership, not the acceptance condition under test. The relevant result is: Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests