cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 41

Question 400

Two distribution switches report an unexpected LLDP neighbor after a contractor reroutes patch cables. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The current neighboring device and optional endpoint location are visible and match approved cabling documentation.
  2. Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget.
  3. Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.
  4. Latency-sensitive flows improve under representative load while other business services remain functional.

Explanation

Correct Answer

A:

The current neighboring device and optional endpoint location are visible and match approved cabling documentation. LLDP is an L2 discovery protocol and cannot prove the whole routed service path or phone emergency-location correctness by itself.

Incorrect Answers

B:

Phones and access points receive stable allocated power while redundant PSU and priority policies remain within budget. This result relates to PoE and LLDP-MED endpoint power coordination, not the acceptance condition under test. The relevant result is: The current neighboring device and optional endpoint location are visible and match approved cabling documentation.

C:

Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access. This result relates to NAC dynamic port policy device classification, not the acceptance condition under test. The relevant result is: The current neighboring device and optional endpoint location are visible and match approved cabling documentation.

D:

Latency-sensitive flows improve under representative load while other business services remain functional. This result relates to Egress priority scheduling and congestion visibility, not the acceptance condition under test. The relevant result is: The current neighboring device and optional endpoint location are visible and match approved cabling documentation.

Question 401

A core upgrade reelects root for one VLAN but not others, disrupting a downstream aggregation path. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A planned alternate link remains blocked and takes over predictably without a broadcast storm.
  2. Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path.
  3. Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision.
  4. Every relevant VLAN converges without loops and redundant paths unblock only when needed.

Explanation

Correct Answer

D:

Every relevant VLAN converges without loops and redundant paths unblock only when needed. An STP mode change can change per-VLAN convergence behavior even if existing links remain physically up.

Incorrect Answers

A:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: Every relevant VLAN converges without loops and redundant paths unblock only when needed.

B:

Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path. This result relates to STP incident recovery with MAC flap evidence, not the acceptance condition under test. The relevant result is: Every relevant VLAN converges without loops and redundant paths unblock only when needed.

C:

Each customer's tagged traffic reaches only its assigned service context without S-VLAN collision. This result relates to QinQ outer and inner VLAN tenant mapping, not the acceptance condition under test. The relevant result is: Every relevant VLAN converges without loops and redundant paths unblock only when needed.

Question 402

An office switch is online in FortiGate but every new employee receives the wrong VLAN. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.
  2. Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.
  3. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  4. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Explanation

Correct Answer

D:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. The paired action is: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.

Incorrect Answers

A:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. These observations are applicable to FortiSwitch port mirroring to network analyzer, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

B:

Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters. These observations are applicable to LACP negotiation on FortiSwitch FortiLink trunks, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

C:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. These observations are applicable to FortiSwitch local packet-capture profile and filters, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Question 403

An engineer creates a strict policy but never assigns it to the access port hosting sensitive terminals. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization.
  2. The authenticated client receives the intended per-user or per-port restrictions and unauthenticated hosts do not inherit them.
  3. The suspect device is restricted without interrupting unrelated tenants and can be restored after review.
  4. The intended tenant configuration changes while other tenants retain their segmentation and service.

Explanation

Correct Answer

A:

Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port.

Incorrect Answers

B:

The authenticated client receives the intended per-user or per-port restrictions and unauthenticated hosts do not inherit them. This result relates to DACL RADIUS attribute and per-session enforcement, not the acceptance condition under test. The relevant result is: Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization.

C:

The suspect device is restricted without interrupting unrelated tenants and can be restored after review. This result relates to VLAN security policy and quarantine actions, not the acceptance condition under test. The relevant result is: Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization.

D:

The intended tenant configuration changes while other tenants retain their segmentation and service. This result relates to Multi-tenant change verification and rollback, not the acceptance condition under test. The relevant result is: Port traffic follows the assigned access security requirement without arbitrary drift after controller synchronization.

Question 404

One access port has increasing CRC errors while its neighbor carries clean traffic under similar load. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Authorized monitoring receives timely, interpretable switch evidence without exposing community strings or overwhelming CPU.
  2. The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions.
  3. The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface.
  4. The analyzer receives the intended copies while production forwarding remains unchanged.

Explanation

Correct Answer

B:

The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy.

Incorrect Answers

A:

Authorized monitoring receives timely, interpretable switch evidence without exposing community strings or overwhelming CPU. This result relates to SNMP and sFlow monitoring configuration, not the acceptance condition under test. The relevant result is: The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions.

C:

The user VLAN reaches the authorized gateway without being placed on an unrelated physical FortiGate interface. This result relates to FortiGate managed FortiSwitch VLAN interface placement, not the acceptance condition under test. The relevant result is: The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions.

D:

The analyzer receives the intended copies while production forwarding remains unchanged. This result relates to FortiSwitch port mirroring to network analyzer, not the acceptance condition under test. The relevant result is: The failing physical or logical port is identified through reproducible counters rather than visual LED assumptions.

Question 405

A replacement switch reboots with old port settings because the controller still associates the serial with a previous group. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting.
  2. Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path.
  3. Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.
  4. Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.
  5. Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure.

Explanation

Correct Answers

A:

Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting. Local changes on a FortiLink-managed switch can be discarded when the FortiGate controller reapplies its known configuration. Verify the action with: Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration. This is the configuration or remediation half of the requested TWO-step pair.

D:

Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration. Local changes on a FortiLink-managed switch can be discarded when the FortiGate controller reapplies its known configuration. The paired action is: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path. This step concerns STP incident recovery with MAC flap evidence and is not part of the required paired solution. The correct action and evidence are: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting. Together with: Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.

C:

Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. This step concerns FortiLink transport over nontrivial L2 or L3 paths and is not part of the required paired solution. The correct action and evidence are: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting. Together with: Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.

E:

Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure. This step concerns Zero-touch provisioning and controller dependency checks and is not part of the required paired solution. The correct action and evidence are: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting. Together with: Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.

Question 406

A network map says a printer connects to switch A but its MAC is learned on switch C's access port. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.
  2. Expected members join the trunk and survive a member disconnect without loops or silent black holes.
  3. A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.
  4. A moved device is traced to its current approved port and incorrect cross-connection is identified.

Explanation

Correct Answer

D:

A moved device is traced to its current approved port and incorrect cross-connection is identified. LLDP provides adjacent-device identity, while MAC learning maps forwarding; neither is a full routed trace by itself.

Incorrect Answers

A:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. This result relates to FortiGate one-arm sniffer across managed switching, not the acceptance condition under test. The relevant result is: A moved device is traced to its current approved port and incorrect cross-connection is identified.

B:

Expected members join the trunk and survive a member disconnect without loops or silent black holes. This result relates to Link aggregation and port error recovery, not the acceptance condition under test. The relevant result is: A moved device is traced to its current approved port and incorrect cross-connection is identified.

C:

A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic. This result relates to FortiSwitch local packet-capture profile and filters, not the acceptance condition under test. The relevant result is: A moved device is traced to its current approved port and incorrect cross-connection is identified.

Question 407

An unmanaged peer uses a static bundle while FortiSwitch expects active LACP negotiation. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.
  2. Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.
  3. Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.
  4. Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency.

Explanation

Correct Answer

A:

Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters. Passive LACP on both ends may not negotiate an active bundle, and individual green links do not prove aggregation. The paired action is: Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation.

Incorrect Answers

B:

Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions. These observations are applicable to Capture and confidentiality limits in incident response, but would not isolate the main failure first. The decisive evidence is: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

C:

Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type. These observations are applicable to Optic compatibility and laser diagnostic evidence, but would not isolate the main failure first. The decisive evidence is: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

D:

Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency. These observations are applicable to Egress priority scheduling and congestion visibility, but would not isolate the main failure first. The decisive evidence is: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

Question 408

An administrator leaves FortiLink split-interface enabled while connecting an aggregate to one managed switch. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.
  2. Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile.
  3. Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.
  4. Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

Explanation

Correct Answer

D:

Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation. The paired action is: Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior.

Incorrect Answers

A:

Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy. These observations are applicable to BPDU guard on endpoint-facing ports, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

B:

Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile. These observations are applicable to FortiSwitch 802.1X port-based authentication, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

C:

Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect. These observations are applicable to FortiSwitch split port breakout mode, but would not isolate the main failure first. The decisive evidence is: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

Question 409

An engineer moves a port into a different security group without verifying the FortiGate controller template. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.
  2. The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate.
  3. The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.
  4. A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.

Explanation

Correct Answer

C:

The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart. Local changes on a FortiLink-managed switch can be discarded when the FortiGate controller reapplies its known configuration.

Incorrect Answers

A:

A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning. This result relates to HA FortiGate pair managing switch topology, not the acceptance condition under test. The relevant result is: The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.

B:

The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate. This result relates to FortiSwitch diagnostic commands and logs, not the acceptance condition under test. The relevant result is: The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.

D:

A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop. This result relates to MCLAG multichassis access redundancy, not the acceptance condition under test. The relevant result is: The managed switch retains the intended controller-pushed policy after a controlled synchronization and restart.

Question 410

A network map says a printer connects to switch A but its MAC is learned on switch C's access port. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  2. Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.
  3. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  4. Inspect monitoring credentials, SNMP version, sFlow export destination, sample rate, counter freshness and access policy.

Explanation

Correct Answer

B:

Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map. LLDP provides adjacent-device identity, while MAC learning maps forwarding; neither is a full routed trace by itself. The paired action is: Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths.

Incorrect Answers

A:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. These observations are applicable to Switch port speed and duplex commissioning, but would not isolate the main failure first. The decisive evidence is: Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.

C:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. These observations are applicable to FortiSwitch local packet-capture profile and filters, but would not isolate the main failure first. The decisive evidence is: Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.

D:

Inspect monitoring credentials, SNMP version, sFlow export destination, sample rate, counter freshness and access policy. These observations are applicable to SNMP and sFlow monitoring configuration, but would not isolate the main failure first. The decisive evidence is: Inspect local and neighbor port IDs, timestamp, learned MAC per VLAN, trunk member and expected cabling map.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests