cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 26

Question 250

An IP phone connects at 100M after a port configuration was mistakenly forced to that rate. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Both ends connect at compatible rates with stable errors and required throughput.
  2. Routes and interfaces are configured at the appropriate control plane and persist after synchronization or reboot.
  3. Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.
  4. Hosts can reach their intended SVI and authorized routed destinations without overlapping address space.

Explanation

Correct Answer

A:

Both ends connect at compatible rates with stable errors and required throughput. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid.

Incorrect Answers

B:

Routes and interfaces are configured at the appropriate control plane and persist after synchronization or reboot. This result relates to FortiSwitch standalone versus FortiLink managed L3 ownership, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

C:

Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation. This result relates to Shared port multi-VDOM policy boundaries, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

D:

Hosts can reach their intended SVI and authorized routed destinations without overlapping address space. This result relates to FortiSwitch SVI routing and connected routes, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

Question 251

A branch switch appears offline although its uplink remains green because FortiLink management frames are blocked. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics.
  2. Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.
  3. Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope.
  4. Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records.

Explanation

Correct Answer

B:

Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. Verify the action with: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

Incorrect Answers

A:

Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. This action is relevant to Capture and confidentiality limits in incident response, not the controlling requirement in this case. A packet-capture tool may record payloads and credentials, so evidence handling is part of the network security process. The targeted response is: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.

C:

Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope. This action is relevant to SNMP and sFlow monitoring configuration, not the controlling requirement in this case. Flow samples are estimates and counters vary by port; collecting telemetry cannot replace a controlled packet capture when headers are needed. The targeted response is: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.

D:

Validate LLDP advertisements, hold timers, peer identity and optional location data before trusting topology or emergency-service records. This action is relevant to LLDP neighbor discovery and location information, not the controlling requirement in this case. LLDP is an L2 discovery protocol and cannot prove the whole routed service path or phone emergency-location correctness by itself. The targeted response is: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.

Question 252

A technician plugs a managed FortiSwitch into an arbitrary WAN port and waits for it to register automatically. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.
  2. Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.
  3. Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.
  4. Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.

Explanation

Correct Answer

D:

Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability. A FortiGate port not configured for FortiLink cannot assume managed-switch ownership from physical connection alone. The paired action is: Create an appropriate FortiGate FortiLink physical or logical interface with supported addressing and controller capabilities before onboarding a switch.

Incorrect Answers

A:

Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path. These observations are applicable to Single FortiGate and single FortiSwitch topology, but would not isolate the main failure first. The decisive evidence is: Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.

B:

Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state. These observations are applicable to NAC dynamic port policy device classification, but would not isolate the main failure first. The decisive evidence is: Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.

C:

Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration. These observations are applicable to Managed switch configuration synchronization, but would not isolate the main failure first. The decisive evidence is: Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.

Question 253

A core upgrade reelects root for one VLAN but not others, disrupting a downstream aggregation path. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior.
  2. Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.
  3. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.
  4. Repair LACP member settings and physical port errors independently before increasing aggregate traffic.

Explanation

Correct Answer

C:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. An STP mode change can change per-VLAN convergence behavior even if existing links remain physically up. Verify the action with: Inspect local mode, per-VLAN bridge ID, peer BPDUs, port state, timers and topology-change history.

Incorrect Answers

A:

Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. This action is relevant to FortiLink split-interface and standby path design, not the controlling requirement in this case. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation. The targeted response is: Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.

B:

Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior. This action is relevant to FortiSwitch 802.1X port-based authentication, not the controlling requirement in this case. A physical link can be up while 802.1X blocks traffic; the switch is the authenticator, not the authentication server. The targeted response is: Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.

D:

Repair LACP member settings and physical port errors independently before increasing aggregate traffic. This action is relevant to Link aggregation and port error recovery, not the controlling requirement in this case. One healthy physical link is not proof an aggregate has balanced traffic or that the peer LACP policy matches. The targeted response is: Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.

Question 254

A coworker plugs an unmanaged eight-port switch into a desk port and hundreds of new MACs are learned. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.
  2. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.
  3. Inspect customer VLAN tags, service VLAN outer tag, FortiLink parent VDOM, mapping and interface capability.
  4. Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.

Explanation

Correct Answer

B:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. The paired action is: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.

Incorrect Answers

A:

Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers. These observations are applicable to DHCP snooping trust-boundary enforcement, but would not isolate the main failure first. The decisive evidence is: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

C:

Inspect customer VLAN tags, service VLAN outer tag, FortiLink parent VDOM, mapping and interface capability. These observations are applicable to QinQ outer and inner VLAN tenant mapping, but would not isolate the main failure first. The decisive evidence is: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

D:

Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria. These observations are applicable to VLAN security policy and quarantine actions, but would not isolate the main failure first. The decisive evidence is: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Question 255

A technician adds a slower interface to an existing aggregate without validating compatibility and member status. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. The expected known switch becomes authorized and synchronizes without accepting an unrelated device.
  2. Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation.
  3. Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency.
  4. Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles.
  5. Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

Explanation

Correct Answers

B:

Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation. Passive LACP on both ends may not negotiate an active bundle, and individual green links do not prove aggregation. Verify the action with: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters. Passive LACP on both ends may not negotiate an active bundle, and individual green links do not prove aggregation. The paired action is: Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

The expected known switch becomes authorized and synchronizes without accepting an unrelated device. This step concerns Controller authorization and pending-switch state and is not part of the required paired solution. The correct action and evidence are: Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation. Together with: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

C:

Review queue maps, output drops, interface rate, strict versus weighted servicing and application latency. This step concerns Egress priority scheduling and congestion visibility and is not part of the required paired solution. The correct action and evidence are: Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation. Together with: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

D:

Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles. This step concerns FortiLink ISL auto-discovery and stack cabling and is not part of the required paired solution. The correct action and evidence are: Choose static, active or passive LACP trunk behavior consistently between peers and verify member aggregation. Together with: Inspect actor partner system IDs, LACP mode, partner synchronization, port speed, VLAN membership and member counters.

Question 256

A firmware image is upgraded successfully but the switch does not reconnect to the FortiGate management controller. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications.
  2. Controller and switch return to supported synchronized software and configuration with test-client services restored.
  3. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  4. A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic.

Explanation

Correct Answer

B:

Controller and switch return to supported synchronized software and configuration with test-client services restored. Managed switches can be reachable at Layer 2 yet show stale policy after incompatible upgrade or failed controller push.

Incorrect Answers

A:

Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications. This result relates to Capture and confidentiality limits in incident response, not the acceptance condition under test. The relevant result is: Controller and switch return to supported synchronized software and configuration with test-client services restored.

C:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This result relates to FortiGate VDOM-based FortiSwitch tenant assignment, not the acceptance condition under test. The relevant result is: Controller and switch return to supported synchronized software and configuration with test-client services restored.

D:

A trace shows the expected ingress/egress control packets without collecting unrelated sensitive network traffic. This result relates to FortiSwitch local packet-capture profile and filters, not the acceptance condition under test. The relevant result is: Controller and switch return to supported synchronized software and configuration with test-client services restored.

Question 257

An unknown device bypasses the intended quarantine profile because a static port policy takes precedence unexpectedly. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.
  2. Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy.
  3. Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.
  4. The current neighboring device and optional endpoint location are visible and match approved cabling documentation.

Explanation

Correct Answer

C:

Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy.

Incorrect Answers

A:

Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution. This result relates to Dynamic ARP inspection with DHCP snooping bindings, not the acceptance condition under test. The relevant result is: Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

B:

Authorized endpoints enter only permitted VLANs while failed authentication is denied or restricted according to policy. This result relates to FortiSwitch 802.1X port-based authentication, not the acceptance condition under test. The relevant result is: Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

D:

The current neighboring device and optional endpoint location are visible and match approved cabling documentation. This result relates to LLDP neighbor discovery and location information, not the acceptance condition under test. The relevant result is: Known printers and IoT devices enter their restricted VLANs while unknown endpoints have no excessive access.

Question 258

An administrator assumes a new FortiSwitch model accepts the same firmware image as an older campus model. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology.
  2. Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.
  3. Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging.
  4. Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.
  5. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.

Explanation

Correct Answers

A:

Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology. A successful image upload does not prove switch operation or controller compatibility after reboot. Verify the action with: Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing. This is the configuration or remediation half of the requested TWO-step pair.

B:

Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing. A successful image upload does not prove switch operation or controller compatibility after reboot. The paired action is: Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

C:

Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging. This step concerns Shared port multi-VDOM policy boundaries and is not part of the required paired solution. The correct action and evidence are: Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology. Together with: Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.

D:

Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. This step concerns FortiLink transport over nontrivial L2 or L3 paths and is not part of the required paired solution. The correct action and evidence are: Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology. Together with: Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.

E:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This step concerns Optic compatibility and laser diagnostic evidence and is not part of the required paired solution. The correct action and evidence are: Choose supported FortiSwitchOS version and maintenance workflow compatible with the FortiGate version and topology. Together with: Review firmware compatibility, release notes, current image, boot fallback, managed switch inventory and upgrade sequencing.

Question 259

The receive optical power is below specification and the team keeps modifying VLANs instead of fixing fiber attenuation. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.
  2. Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.
  3. Check per-member speed, partner identity, state, optical counters, VLAN tags and aggregate distribution.
  4. Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

Explanation

Correct Answer

D:

Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type. Matching a mechanical optic cage is insufficient to prove optical or firmware compatibility. The paired action is: Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

Incorrect Answers

A:

Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway. These observations are applicable to FortiSwitch SVI routing and connected routes, but would not isolate the main failure first. The decisive evidence is: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

B:

Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria. These observations are applicable to VLAN security policy and quarantine actions, but would not isolate the main failure first. The decisive evidence is: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

C:

Check per-member speed, partner identity, state, optical counters, VLAN tags and aggregate distribution. These observations are applicable to Link aggregation and port error recovery, but would not isolate the main failure first. The decisive evidence is: Inspect transceiver SKU, supported compatibility table, Tx/Rx optical power, interface alarms and cable plant type.

Question 260

A server sends untagged frames but its switch port expects only tagged frames and never learns the MAC in the intended VLAN. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters.
  2. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.
  3. Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.
  4. Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.

Explanation

Correct Answer

A:

Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters. An L2 switch uses MAC destination and VLAN state for forwarding; a healthy SVI is not proof a host is on the proper port. The paired action is: Check MAC-learning table and flooding behavior before replacing a switch or changing its IP routing.

Incorrect Answers

B:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. These observations are applicable to FortiSwitch local packet-capture profile and filters, but would not isolate the main failure first. The decisive evidence is: Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters.

C:

Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. These observations are applicable to IGMP snooping and multicast receivers, but would not isolate the main failure first. The decisive evidence is: Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters.

D:

Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway. These observations are applicable to FortiSwitch SVI routing and connected routes, but would not isolate the main failure first. The decisive evidence is: Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests