cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 25

Question 240

A high-power access point boots but shuts down once its additional radio activates. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity.
  2. Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.
  3. Hosts can reach their intended SVI and authorized routed destinations without overlapping address space.
  4. FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy.

Explanation

Correct Answer

A:

Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw.

Incorrect Answers

B:

Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN. This result relates to Layer 2 MAC-learning and forwarding decisions, not the acceptance condition under test. The relevant result is: Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity.

C:

Hosts can reach their intended SVI and authorized routed destinations without overlapping address space. This result relates to FortiSwitch SVI routing and connected routes, not the acceptance condition under test. The relevant result is: Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity.

D:

FortiGate captures the suspected frames at the chosen observation point without altering the user traffic policy. This result relates to FortiGate one-arm sniffer across managed switching, not the acceptance condition under test. The relevant result is: Critical telephony and wireless endpoints receive continuous intended power without overrunning PSU capacity.

Question 241

A new FortiSwitch is connected to a port that was not enabled as FortiLink on FortiGate. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.
  2. Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.
  3. Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.
  4. Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics.
  5. Expected members join the trunk and survive a member disconnect without loops or silent black holes.

Explanation

Correct Answers

B:

Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. Verify the action with: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. This is the configuration or remediation half of the requested TWO-step pair.

C:

Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. The paired action is: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction. This step concerns FortiGate one-arm sniffer across managed switching and is not part of the required paired solution. The correct action and evidence are: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. Together with: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

D:

Use narrow capture windows, least-privilege access and approved storage/retention when collecting packet data for diagnostics. This step concerns Capture and confidentiality limits in incident response and is not part of the required paired solution. The correct action and evidence are: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. Together with: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

E:

Expected members join the trunk and survive a member disconnect without loops or silent black holes. This step concerns Link aggregation and port error recovery and is not part of the required paired solution. The correct action and evidence are: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing. Together with: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

Question 242

A trunk member reports no traffic despite all LACP member LEDs appearing green. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  2. Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.
  3. Inspect factory-default mode, DHCP or discovery exchange, upstream native VLAN, FortiLink enablement, NTP and controller authorization.
  4. Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

Explanation

Correct Answer

D:

Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy. The paired action is: Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.

Incorrect Answers

A:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. These observations are applicable to Capture-based DHCP and ARP path isolation, but would not isolate the main failure first. The decisive evidence is: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

B:

Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction. These observations are applicable to FortiGate one-arm sniffer across managed switching, but would not isolate the main failure first. The decisive evidence is: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

C:

Inspect factory-default mode, DHCP or discovery exchange, upstream native VLAN, FortiLink enablement, NTP and controller authorization. These observations are applicable to Zero-touch provisioning and controller dependency checks, but would not isolate the main failure first. The decisive evidence is: Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.

Question 243

An engineer creates a strict policy but never assigns it to the access port hosting sensitive terminals. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.
  2. Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.
  3. Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware.
  4. Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.

Explanation

Correct Answer

B:

Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port. The paired action is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

Incorrect Answers

A:

Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria. These observations are applicable to VLAN security policy and quarantine actions, but would not isolate the main failure first. The decisive evidence is: Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

C:

Inspect supported topology, FortiLink p2p settings, TPID, transport reachability, discovery frames and switch firmware. These observations are applicable to FortiLink transport over nontrivial L2 or L3 paths, but would not isolate the main failure first. The decisive evidence is: Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

D:

Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN. These observations are applicable to MAC-based authentication and restricted legacy devices, but would not isolate the main failure first. The decisive evidence is: Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

Question 244

All phones lose leases after the uplink carrying approved DHCP offers was marked untrusted. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.
  2. Inspect monitoring credentials, SNMP version, sFlow export destination, sample rate, counter freshness and access policy.
  3. Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.
  4. Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Explanation

Correct Answer

A:

Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers. Trusting every port defeats DHCP snooping and wrongly distrusting the server uplink may suppress all leases. The paired action is: Enable supported DHCP snooping on client VLANs and trust only known DHCP-server or relay-facing links.

Incorrect Answers

B:

Inspect monitoring credentials, SNMP version, sFlow export destination, sample rate, counter freshness and access policy. These observations are applicable to SNMP and sFlow monitoring configuration, but would not isolate the main failure first. The decisive evidence is: Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.

C:

Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls. These observations are applicable to FortiSwitch security profile application and precedence, but would not isolate the main failure first. The decisive evidence is: Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.

D:

Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action. These observations are applicable to Port MAC learning-limit and violation controls, but would not isolate the main failure first. The decisive evidence is: Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.

Question 245

A third-party optic fits the switch but platform logs report it as unsupported after a firmware change. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A capable handset reports the expected voice network policy and traffic uses the correct VLAN.
  2. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.
  3. A session's effective access changes only when the authorization result is accepted and policy is installed on hardware.
  4. Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path.

Explanation

Correct Answer

B:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This is a measurable client, control-plane, or security outcome rather than a claim that configuration was entered. Matching a mechanical optic cage is insufficient to prove optical or firmware compatibility.

Incorrect Answers

A:

A capable handset reports the expected voice network policy and traffic uses the correct VLAN. This result relates to LLDP-MED voice network policy advertisements, not the acceptance condition under test. The relevant result is: The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.

C:

A session's effective access changes only when the authorization result is accepted and policy is installed on hardware. This result relates to RADIUS change of authorization and applied session policy, not the acceptance condition under test. The relevant result is: The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.

D:

Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path. This result relates to STP incident recovery with MAC flap evidence, not the acceptance condition under test. The relevant result is: The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.

Question 246

A new replacement is visible in discovery but its ports do not receive policy because it is pending authorization. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.
  2. Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications.
  3. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  4. Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade.

Explanation

Correct Answer

A:

Exactly the intended serial joins managed inventory and receives approved controller settings after authorization. Switch discovery is not the same as authorization; auto-authorization has governance implications and a managed-mode transition may reboot the device.

Incorrect Answers

B:

Troubleshooting evidence is sufficient to establish the fault without exporting unnecessary private communications. This result relates to Capture and confidentiality limits in incident response, not the acceptance condition under test. The relevant result is: Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.

C:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This result relates to FortiGate VDOM-based FortiSwitch tenant assignment, not the acceptance condition under test. The relevant result is: Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.

D:

Switches reconnect to FortiLink and preserve approved VLAN/role configuration after the planned upgrade. This result relates to Firmware and lifecycle preparation for FortiSwitch, not the acceptance condition under test. The relevant result is: Exactly the intended serial joins managed inventory and receives approved controller settings after authorization.

Question 247

A managed switch's controller connection stays up while a trunk change removes the voice VLAN. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.
  2. Change managed switch VLAN membership through the FortiGate controller and verify the installed configuration stays consistent.
  3. Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports.
  4. Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths.

Explanation

Correct Answer

A:

Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. Verify the action with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Incorrect Answers

B:

Change managed switch VLAN membership through the FortiGate controller and verify the installed configuration stays consistent. This action is relevant to VLAN configuration persistence and drift control, not the controlling requirement in this case. Directly editing a FortiLink-managed switch can cause drift because FortiGate remains the controller of record. The targeted response is: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.

C:

Identify FortiLink failures caused by split-interface, HA, MCLAG peer or ISL mismatches before changing unrelated ports. This action is relevant to FortiLink HA and MCLAG topology faults, not the controlling requirement in this case. FortiGate HA, FortiLink split-interface and FortiSwitch MCLAG have distinct failover behaviors that cannot be inferred from link LEDs alone. The targeted response is: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.

D:

Correlate LLDP neighbor inventory and VLAN-specific MAC entries to reconstruct actual endpoint and uplink paths. This action is relevant to LLDP and MAC forwarding table extraction, not the controlling requirement in this case. LLDP provides adjacent-device identity, while MAC learning maps forwarding; neither is a full routed trace by itself. The targeted response is: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.

Question 248

A phone ignores a newly created voice VLAN because the switch advertises an obsolete LLDP-MED network policy. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.
  2. Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.
  3. Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.
  4. Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.
  5. Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority.

Explanation

Correct Answers

C:

Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. The paired action is: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. LLDP-MED exchanges policy hints with compatible endpoints; it does not substitute for port membership and DHCP. Verify the action with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes. This step concerns STP incident recovery with MAC flap evidence and is not part of the required paired solution. The correct action and evidence are: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. Together with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

B:

Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional. This step concerns Static port ACL forwarding decisions and is not part of the required paired solution. The correct action and evidence are: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. Together with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

D:

Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. This step concerns FortiSwitch split port breakout mode and is not part of the required paired solution. The correct action and evidence are: Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. Together with: Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.

Question 249

An authorized replacement is still pending because the switch serial was entered incorrectly in controller inventory. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames.
  2. Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller.
  3. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.
  4. Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.

Explanation

Correct Answer

C:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. Verify the action with: Inspect switch serial, discovered state, pending approval, controller permissions, post-authorize reboot and managed mode.

Incorrect Answers

A:

Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. This action is relevant to FortiSwitch local packet-capture profile and filters, not the controlling requirement in this case. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port. The targeted response is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

B:

Build FortiSwitch VLAN interfaces in the correct FortiLink context and assign ports through the managed switch controller. This action is relevant to FortiGate managed FortiSwitch VLAN interface placement, not the controlling requirement in this case. A named VLAN in FortiOS is not proof its switch-port membership and L3 policy are correct. The targeted response is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

D:

Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location. This action is relevant to Managed switch port statistics and counter analysis, not the controlling requirement in this case. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy. The targeted response is: Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

Question 250

An IP phone connects at 100M after a port configuration was mistakenly forced to that rate. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Both ends connect at compatible rates with stable errors and required throughput.
  2. Routes and interfaces are configured at the appropriate control plane and persist after synchronization or reboot.
  3. Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation.
  4. Hosts can reach their intended SVI and authorized routed destinations without overlapping address space.

Explanation

Correct Answer

A:

Both ends connect at compatible rates with stable errors and required throughput. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid.

Incorrect Answers

B:

Routes and interfaces are configured at the appropriate control plane and persist after synchronization or reboot. This result relates to FortiSwitch standalone versus FortiLink managed L3 ownership, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

C:

Two tenants can use the supported shared port without accidental cross-tenant broadcasts or privilege escalation. This result relates to Shared port multi-VDOM policy boundaries, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

D:

Hosts can reach their intended SVI and authorized routed destinations without overlapping address space. This result relates to FortiSwitch SVI routing and connected routes, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests