cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 14

Question 130

A printer is moved to a new patch panel but its MAC keeps appearing on an old trunk member. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Only intended networks are reachable through the configured route and the return path remains valid.
  2. The authenticated client receives the intended per-user or per-port restrictions and unauthenticated hosts do not inherit them.
  3. Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.
  4. A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops.

Explanation

Correct Answer

C:

Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN. An L2 switch uses MAC destination and VLAN state for forwarding; a healthy SVI is not proof a host is on the proper port.

Incorrect Answers

A:

Only intended networks are reachable through the configured route and the return path remains valid. This result relates to Static route and default gateway validation, not the acceptance condition under test. The relevant result is: Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.

B:

The authenticated client receives the intended per-user or per-port restrictions and unauthenticated hosts do not inherit them. This result relates to DACL RADIUS attribute and per-session enforcement, not the acceptance condition under test. The relevant result is: Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.

D:

A redundant topology recovers after a link failure without simultaneous independent forwarding paths causing loops. This result relates to FortiLink split-interface and standby path design, not the acceptance condition under test. The relevant result is: Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.

Question 131

A high-power access point boots but shuts down once its additional radio activates. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.
  2. Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.
  3. Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable.
  4. Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority.
  5. Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices.

Explanation

Correct Answers

B:

Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. The paired action is: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. This is the diagnostic or verification half of the requested TWO-step pair.

E:

Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Not every FortiSwitch model or port supports identical PoE allocation or every attached device's peak draw. Verify the action with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes. This step concerns Voice and data VLAN separation on shared access ports and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

C:

Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable. This step concerns DHCP server allowlist and Option 82 validation and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

D:

Configure supported LLDP-MED voice policy so a compatible handset learns its VLAN and traffic priority. This step concerns LLDP-MED voice network policy advertisements and is not part of the required paired solution. The correct action and evidence are: Verify model-specific PoE class, total switch power budget and per-port policy before enabling new powered devices. Together with: Inspect power supply reserve, current draw, negotiated PoE class, priority shedding and port events.

Question 132

A switch CLI patch fixes a VLAN temporarily but disappears after controller synchronization. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition.
  2. Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting.
  3. Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues.
  4. Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging.

Explanation

Correct Answer

B:

Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting. Local changes on a FortiLink-managed switch can be discarded when the FortiGate controller reapplies its known configuration. Verify the action with: Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.

Incorrect Answers

A:

Authorize only intended discovered FortiSwitch serial numbers and confirm management mode after the expected transition. This action is relevant to Discovered versus authorized FortiSwitch state, not the controlling requirement in this case. Switch discovery is not the same as authorization; auto-authorization has governance implications and a managed-mode transition may reboot the device. The targeted response is: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting.

C:

Define appropriate trusted ingress marking sources and classify untrusted frames before choosing egress queues. This action is relevant to QoS ingress classification and trust boundaries, not the controlling requirement in this case. A packet marking has no useful QoS effect until supported classification and scheduling map it consistently. The targeted response is: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting.

D:

Permit shared FortiSwitch hardware across VDOMs only with verified port and feature support and explicit tenant VLAN tagging. This action is relevant to Shared port multi-VDOM policy boundaries, not the controlling requirement in this case. Shared physical ports can support some per-port controls across VDOMs, but feature support and tagging must be checked for the exact release. The targeted response is: Apply changes on the FortiGate controller and verify installed FortiSwitch state and reconciliation before rebooting.

Question 133

A user changes departments and the RADIUS server issues CoA but the switch continues enforcing the old access role. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.
  2. Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.
  3. Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.
  4. Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames.

Explanation

Correct Answer

C:

Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology. RADIUS authentication success is not proof that a downloadable ACL or CoA update was enforced; some modes have documented conditions. Verify the action with: Review RADIUS Access-Accept attributes, CoA path, session identifier, switch port role, DACL installation and packet test.

Incorrect Answers

A:

Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence. This action is relevant to FortiSwitch security profile application and precedence, not the controlling requirement in this case. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port. The targeted response is: Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.

B:

Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. This action is relevant to VLAN security policy and quarantine actions, not the controlling requirement in this case. Quarantine must be enforced at the right switch and VLAN path; a security-alert label alone does not remove access. The targeted response is: Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.

D:

Create a bounded packet-capture profile on the right switch interface with a narrow filter, then start/stop and inspect frames. This action is relevant to FortiSwitch local packet-capture profile and filters, not the controlling requirement in this case. Packet captures are interface and filter scoped, and platform buffer limits differ; a capture file is not proof of all traffic on every switch port. The targeted response is: Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.

Question 134

An administrator raises MAC limits on every port instead of diagnosing one device creating random source addresses. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.
  2. Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location.
  3. Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology.
  4. Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.

Explanation

Correct Answer

D:

Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports. Dynamic MAC learning limits reduce accidental fan-out but should be tuned for legitimate multi-device access designs. Verify the action with: Inspect MAC table usage, configured learning limit, learned device count, port-security event and violation action.

Incorrect Answers

A:

Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence. This action is relevant to FortiSwitch security profile application and precedence, not the controlling requirement in this case. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port. The targeted response is: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.

B:

Use FortiGate FortiSwitch Ports statistics or supported switch commands to isolate errors, utilization and port status at the right location. This action is relevant to Managed switch port statistics and counter analysis, not the controlling requirement in this case. A port-up indicator or one successful ping is not proof that a congested or errored uplink is healthy. The targeted response is: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.

C:

Verify that supported CoA or dynamic user security profiles are enforced on authenticated sessions under the deployed topology. This action is relevant to RADIUS change of authorization and applied session policy, not the controlling requirement in this case. RADIUS authentication success is not proof that a downloadable ACL or CoA update was enforced; some modes have documented conditions. The targeted response is: Set model-supported dynamic MAC address learning limits and specific violation action on access-facing switch ports.

Question 135

A branch turns off 802.1X to fix an outage and inadvertently permits visitors onto production VLANs. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Review target VLAN, switch isolation controls, client MAC table, permitted gateway path and peer-to-peer test.
  2. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  3. Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile.
  4. Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.

Explanation

Correct Answer

C:

Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile. A physical link can be up while 802.1X blocks traffic; the switch is the authenticator, not the authentication server. The paired action is: Configure supported IEEE 802.1X port security against an approved RADIUS service with explicit guest/unauthorized behavior.

Incorrect Answers

A:

Review target VLAN, switch isolation controls, client MAC table, permitted gateway path and peer-to-peer test. These observations are applicable to Intra-VLAN blocking and isolation boundaries, but would not isolate the main failure first. The decisive evidence is: Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile.

B:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. These observations are applicable to Capture-based DHCP and ARP path isolation, but would not isolate the main failure first. The decisive evidence is: Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile.

D:

Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet. These observations are applicable to IPv4 source guard and binding-based packet filtering, but would not isolate the main failure first. The decisive evidence is: Inspect supplicant EAP exchange, RADIUS reachability, shared secret, port policy, authentication result and assigned access profile.

Question 136

A multicast paging VLAN disappears after a template update allowed only the corporate user VLAN. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. A session's effective access changes only when the authorization result is accepted and policy is installed on hardware.
  2. Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.
  3. Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.
  4. Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.
  5. Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path.

Explanation

Correct Answers

B:

Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. Link up and successful traffic in one VLAN do not prove every VLAN is correctly provisioned on the path. Verify the action with: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop. This is the configuration or remediation half of the requested TWO-step pair.

D:

Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop. Link up and successful traffic in one VLAN do not prove every VLAN is correctly provisioned on the path. The paired action is: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

A session's effective access changes only when the authorization result is accepted and policy is installed on hardware. This step concerns RADIUS change of authorization and applied session policy and is not part of the required paired solution. The correct action and evidence are: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. Together with: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

C:

Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover. This step concerns FortiSwitch native VLAN versus allowed VLANs and is not part of the required paired solution. The correct action and evidence are: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. Together with: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

E:

Check FortiLink parent, VLAN ID, VDOM membership, port assignment, subnet and firewall-policy path. This step concerns FortiGate managed FortiSwitch VLAN interface placement and is not part of the required paired solution. The correct action and evidence are: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. Together with: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

Question 137

A distribution uplink carries VLAN 40 locally but the peer excludes VLAN 40 from its allowed list. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards.
  2. Repair LACP member settings and physical port errors independently before increasing aggregate traffic.
  3. Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.
  4. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.

Explanation

Correct Answer

C:

Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage. Verify the action with: Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface.

Incorrect Answers

A:

Build a documented supported FortiSwitch daisy chain or multi-tier topology with adequate ISL uplink capacity and safeguards. This action is relevant to FortiSwitch multi-tier managed topology, not the controlling requirement in this case. A FortiGate controls each FortiSwitch through the managed Layer-2 topology, but downstream reachability depends on upstream FortiLink links. The targeted response is: Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

B:

Repair LACP member settings and physical port errors independently before increasing aggregate traffic. This action is relevant to Link aggregation and port error recovery, not the controlling requirement in this case. One healthy physical link is not proof an aggregate has balanced traffic or that the peer LACP policy matches. The targeted response is: Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

D:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. This action is relevant to RPVST and supported STP mode interoperability, not the controlling requirement in this case. An STP mode change can change per-VLAN convergence behavior even if existing links remain physically up. The targeted response is: Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.

Question 138

A technician isolates management over FortiLink but mistakenly blocks the same link's approved client VLAN traffic. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Plan FortiLink management under FortiGate HA with supported links, peer roles and deterministic failover tests.
  2. Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability.
  3. Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable.
  4. Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces.
  5. Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

Explanation

Correct Answers

D:

Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces. FortiLink carries management and data traffic; a valid management handshake does not prove every user VLAN is forwarded. Verify the action with: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path. FortiLink carries management and data traffic; a valid management handshake does not prove every user VLAN is forwarded. The paired action is: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Plan FortiLink management under FortiGate HA with supported links, peer roles and deterministic failover tests. This step concerns HA FortiGate pair managing switch topology and is not part of the required paired solution. The correct action and evidence are: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces. Together with: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

B:

Check interface type, FortiLink enablement, discovery setting, IP assignment, switch model support, and management VLAN reachability. This step concerns FortiLink management interface provisioning and is not part of the required paired solution. The correct action and evidence are: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces. Together with: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

C:

Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable. This step concerns DHCP server allowlist and Option 82 validation and is not part of the required paired solution. The correct action and evidence are: Use a supported direct FortiLink connection and confirm controller traffic and client forwarding on the intended interfaces. Together with: Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.

Question 139

Two aggregation switches have two uplinks to an access device but lack a configured FortiSwitch MCLAG pair. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function.
  2. A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies.
  3. The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate.
  4. A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.

Explanation

Correct Answer

D:

A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop. MCLAG requires peer coordination and correct downstream aggregation; it is not equivalent to connecting independent switches in parallel.

Incorrect Answers

A:

The new FortiSwitch discovers the designated controller while unrelated FortiGate interfaces retain their normal function. This result relates to FortiLink management interface provisioning, not the acceptance condition under test. The relevant result is: A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.

B:

A tenant reaches only its approved VDOM resources and does not inherit another tenant's policies. This result relates to FortiGate VDOM-based FortiSwitch tenant assignment, not the acceptance condition under test. The relevant result is: A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.

C:

The suspected failure has a traceable event sequence and a specific evidence-based remediation candidate. This result relates to FortiSwitch diagnostic commands and logs, not the acceptance condition under test. The relevant result is: A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.

Question 140

A management SVI is assigned an address in a subnet already used by a different switch interface. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests.
  2. Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.
  3. Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support.
  4. Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

Explanation

Correct Answer

B:

Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway. Layer-3 SVI configuration and actual usable forwarding are separate from having a named Layer-2 VLAN. The paired action is: Configure supported switch virtual interfaces and routed gateway addresses with correct VLAN, subnet and management context.

Incorrect Answers

A:

Inspect shared-port VLAN diff, tenant inventory, VDOM policy, change approval and representative positive/negative access tests. These observations are applicable to Multi-tenant change verification and rollback, but would not isolate the main failure first. The decisive evidence is: Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.

C:

Inspect FortiLink operational mode, controller ownership, current management address, VDOM and switch model support. These observations are applicable to FortiSwitch standalone versus FortiLink managed L3 ownership, but would not isolate the main failure first. The decisive evidence is: Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.

D:

Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. These observations are applicable to IGMP snooping and multicast receivers, but would not isolate the main failure first. The decisive evidence is: Inspect SVI admin state, VLAN membership, address and mask, connected route, ARP and intended upstream gateway.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests