CompTIA N10-009 Practice Test 34
Question 330
Technicians frequently unplug the wrong patch cables because an equipment rack has no port maps. A colleague instead suggests: Randomize labels each maintenance window to avoid stale records. Which finding MOST specifically explains why that suggestion is unsuitable?
- Documented terminations reduce accidental disconnections and speed troubleshooting.
- Connectivity polling does not directly measure environmental conditions.
- Shared facilities may need distinct physical access zones.
- Unstable identifiers undermine traceability and change control.
Explanation
Correct Answer
D:Unstable identifiers undermine traceability and change control. This flaw directly concerns the proposed action: Randomize labels each maintenance window to avoid stale records.
Incorrect Answers
A:This explains why the recommended control works: Create clear patch-panel, port and cable labeling tied to current diagrams.
B:This flaw concerns a different case in objective 2.4: A server room has no humidity monitoring and corrosion appears on metal contact surfaces. The current rejected proposal is: Randomize labels each maintenance window to avoid stale records.
C:This rationale belongs to a later changed condition: A second company moves into the building and requires physical equipment separation.
Question 331
Technicians frequently unplug the wrong patch cables because an equipment rack has no port maps. After applying the solution 'Create clear patch-panel, port and cable labeling tied to current diagrams.', which observation MOST directly proves that the requirement was met?
- Trend logs demonstrate humidity and temperature remain within site standards.
- Physical checks reconcile sampled port labels with the cable map.
- Approval is recorded for 'Create clear patch-panel, port and cable labeling tied to current diagrams.' but no operational validation is performed.
- Door access logs and walkthroughs confirm controlled entry and locked racks.
Explanation
Correct Answer
B:Physical checks reconcile sampled port labels with the cable map. It tests the intended outcome because documented terminations reduce accidental disconnections and speed troubleshooting.
Incorrect Answers
A:This observation is for a different condition: A server room has no humidity monitoring and corrosion appears on metal contact surfaces. It does not directly test the target outcome: Technicians frequently unplug the wrong patch cables because an equipment rack has no port maps.
C:Approval alone does not demonstrate operating effectiveness. The missing direct test is: Physical checks reconcile sampled port labels with the cable map.
D:This test addresses a separate problem: A vendor proposes an open public closet for core networking gear with unrestricted access.
Question 332
The original case was: Technicians frequently unplug the wrong patch cables because an equipment rack has no port maps. The requirement then changes: A second company moves into the building and requires physical equipment separation. Which revised action BEST meets this new condition?
- Create clear patch-panel, port and cable labeling tied to current diagrams.
- Use controlled locked cabinets and appropriate access assignments.
- Randomize labels each maintenance window to avoid stale records.
- Physical checks reconcile sampled port labels with the cable map.
Explanation
Correct Answer
B:Shared facilities may need distinct physical access zones. The revised requirement is: A second company moves into the building and requires physical equipment separation. The appropriate action is: Use controlled locked cabinets and appropriate access assignments.
Incorrect Answers
A:This is the original control. Documented terminations reduce accidental disconnections and speed troubleshooting. It does not directly satisfy the revised requirement: A second company moves into the building and requires physical equipment separation.
C:Unstable identifiers undermine traceability and change control. It remains inappropriate in the revised context.
D:Physical checks reconcile sampled port labels with the cable map. The current requirement is: A second company moves into the building and requires physical equipment separation.
Question 333
A fiber distribution rack accumulates dust and unprotected fiber ends during maintenance. Which action MOST directly meets the stated networking requirement?
- Place critical infrastructure in locked controlled rooms with tracked authorized entry.
- Select organized fiber distribution with matching MPO/LC breakouts as required.
- Touch ferrules directly and leave connectors uncapped to speed reconnects.
- Use proper fiber panel management, clean protective caps and approved cleaning procedures.
Explanation
Correct Answer
D:Dust, bend stress and poor connector hygiene degrade optical performance. This specifically resolves: A fiber distribution rack accumulates dust and unprotected fiber ends during maintenance.
Incorrect Answers
A:This addresses another problem in objective 2.4: A vendor proposes an open public closet for core networking gear with unrestricted access.
B:This action responds to a later condition: The fiber routing changes to a high-density trunk design. High-density trunks need connector mapping and bend-radius management.
C:Contamination and physical handling raise insertion loss and reflection. The suggested approach is: Touch ferrules directly and leave connectors uncapped to speed reconnects.
Question 334
A fiber distribution rack accumulates dust and unprotected fiber ends during maintenance. A colleague instead suggests: Touch ferrules directly and leave connectors uncapped to speed reconnects. Which finding MOST specifically explains why that suggestion is unsuitable?
- High-density trunks need connector mapping and bend-radius management.
- Logical security does not prevent unplugging, theft or physical manipulation.
- Dust, bend stress and poor connector hygiene degrade optical performance.
- Contamination and physical handling raise insertion loss and reflection.
Explanation
Correct Answer
D:Contamination and physical handling raise insertion loss and reflection. This flaw directly concerns the proposed action: Touch ferrules directly and leave connectors uncapped to speed reconnects.
Incorrect Answers
A:This rationale belongs to a later changed condition: The fiber routing changes to a high-density trunk design.
B:This flaw concerns a different case in objective 2.4: A vendor proposes an open public closet for core networking gear with unrestricted access. The current rejected proposal is: Touch ferrules directly and leave connectors uncapped to speed reconnects.
C:This explains why the recommended control works: Use proper fiber panel management, clean protective caps and approved cleaning procedures.
Question 335
A fiber distribution rack accumulates dust and unprotected fiber ends during maintenance. After applying the solution 'Use proper fiber panel management, clean protective caps and approved cleaning procedures.', which observation MOST directly proves that the requirement was met?
- Approval is recorded for 'Use proper fiber panel management, clean protective caps and approved cleaning procedures.' but no operational validation is performed.
- Door access logs and walkthroughs confirm controlled entry and locked racks.
- Cable maps and rack diagrams match tested patch-panel runs to floor ports.
- Post-clean optical tests show acceptable loss and stable link state.
Explanation
Correct Answer
D:Post-clean optical tests show acceptable loss and stable link state. It tests the intended outcome because dust, bend stress and poor connector hygiene degrade optical performance.
Incorrect Answers
A:Approval alone does not demonstrate operating effectiveness. The missing direct test is: Post-clean optical tests show acceptable loss and stable link state.
B:This observation is for a different condition: A vendor proposes an open public closet for core networking gear with unrestricted access. It does not directly test the target outcome: A fiber distribution rack accumulates dust and unprotected fiber ends during maintenance.
C:This test addresses a separate problem: A six-floor office has one main equipment room and intermediate closets for each floor's access cabling.
Question 336
The original case was: A fiber distribution rack accumulates dust and unprotected fiber ends during maintenance. The requirement then changes: The fiber routing changes to a high-density trunk design. Which revised action BEST meets this new condition?
- Select organized fiber distribution with matching MPO/LC breakouts as required.
- Touch ferrules directly and leave connectors uncapped to speed reconnects.
- Post-clean optical tests show acceptable loss and stable link state.
- Use proper fiber panel management, clean protective caps and approved cleaning procedures.
Explanation
Correct Answer
A:High-density trunks need connector mapping and bend-radius management. The revised requirement is: The fiber routing changes to a high-density trunk design. The appropriate action is: Select organized fiber distribution with matching MPO/LC breakouts as required.
Incorrect Answers
B:Contamination and physical handling raise insertion loss and reflection. It remains inappropriate in the revised context.
C:Post-clean optical tests show acceptable loss and stable link state. The current requirement is: The fiber routing changes to a high-density trunk design.
D:This is the original control. Dust, bend stress and poor connector hygiene degrade optical performance. It does not directly satisfy the revised requirement: The fiber routing changes to a high-density trunk design.
Question 337
A server room has no humidity monitoring and corrosion appears on metal contact surfaces. Which action MOST directly meets the stated networking requirement?
- Install environmental monitoring with maintained humidity control and alerts.
- Rely on network ping tests alone to detect moisture.
- Design a suitable MDF backbone with IDF distribution and documented fiber or copper runs.
- Select code-compliant detection and appropriate clean-agent or approved suppression systems.
Explanation
Correct Answer
A:High or low humidity can damage electronics or increase electrostatic discharge risk. This specifically resolves: A server room has no humidity monitoring and corrosion appears on metal contact surfaces.
Incorrect Answers
B:Connectivity polling does not directly measure environmental conditions. The suggested approach is: Rely on network ping tests alone to detect moisture.
C:This addresses another problem in objective 2.4: A six-floor office has one main equipment room and intermediate closets for each floor's access cabling.
D:This action responds to a later condition: Fire risk requires suppression without excessive damage to active electronics. Fire-protection design must consider occupants and equipment exposure.
Question 338
A server room has no humidity monitoring and corrosion appears on metal contact surfaces. A colleague instead suggests: Rely on network ping tests alone to detect moisture. Which finding MOST specifically explains why that suggestion is unsuitable?
- High or low humidity can damage electronics or increase electrostatic discharge risk.
- Unstructured cabling complicates fault isolation and may violate length limits.
- Fire-protection design must consider occupants and equipment exposure.
- Connectivity polling does not directly measure environmental conditions.
Explanation
Correct Answer
D:Connectivity polling does not directly measure environmental conditions. This flaw directly concerns the proposed action: Rely on network ping tests alone to detect moisture.
Incorrect Answers
A:This explains why the recommended control works: Install environmental monitoring with maintained humidity control and alerts.
B:This flaw concerns a different case in objective 2.4: A six-floor office has one main equipment room and intermediate closets for each floor's access cabling. The current rejected proposal is: Rely on network ping tests alone to detect moisture.
C:This rationale belongs to a later changed condition: Fire risk requires suppression without excessive damage to active electronics.
Question 339
A server room has no humidity monitoring and corrosion appears on metal contact surfaces. After applying the solution 'Install environmental monitoring with maintained humidity control and alerts.', which observation MOST directly proves that the requirement was met?
- Cable maps and rack diagrams match tested patch-panel runs to floor ports.
- Trend logs demonstrate humidity and temperature remain within site standards.
- Intake and exhaust temperature trends stabilize within vendor limits.
- Approval is recorded for 'Install environmental monitoring with maintained humidity control and alerts.' but no operational validation is performed.
Explanation
Correct Answer
B:Trend logs demonstrate humidity and temperature remain within site standards. It tests the intended outcome because high or low humidity can damage electronics or increase electrostatic discharge risk.
Incorrect Answers
A:This observation is for a different condition: A six-floor office has one main equipment room and intermediate closets for each floor's access cabling. It does not directly test the target outcome: A server room has no humidity monitoring and corrosion appears on metal contact surfaces.
C:This test addresses a separate problem: New rack switches draw air from front to rear but are installed in a reversed hot/cold aisle pattern.
D:The missing direct test is: Trend logs demonstrate humidity and temperature remain within site standards.
Question 340
The original case was: A server room has no humidity monitoring and corrosion appears on metal contact surfaces. The requirement then changes: Fire risk requires suppression without excessive damage to active electronics. Which revised action BEST meets this new condition?
- Rely on network ping tests alone to detect moisture.
- Select code-compliant detection and appropriate clean-agent or approved suppression systems.
- Trend logs demonstrate humidity and temperature remain within site standards.
- Install environmental monitoring with maintained humidity control and alerts.
Explanation
Correct Answer
B:Fire-protection design must consider occupants and equipment exposure. The revised requirement is: Fire risk requires suppression without excessive damage to active electronics. The appropriate action is: Select code-compliant detection and appropriate clean-agent or approved suppression systems.
Incorrect Answers
A:Connectivity polling does not directly measure environmental conditions. It remains inappropriate in the revised context.
C:Trend logs demonstrate humidity and temperature remain within site standards. The current requirement is: Fire risk requires suppression without excessive damage to active electronics.
D:This is the original control. High or low humidity can damage electronics or increase electrostatic discharge risk. It does not directly satisfy the revised requirement: Fire risk requires suppression without excessive damage to active electronics.