CompTIA N10-009 Practice Test 21
Question 200
A router has routes for 10.20.0.0/16 and 10.20.8.0/24 and receives traffic for 10.20.8.42. Which THREE entries correctly identify the applicable control, its technical principle, and a direct validation observation? (Select THREE.)
- Route lookup selects the most specific matching prefix before comparing metrics across equal lengths.
- A route lookup or capture confirms forwarding toward the /24 next hop.
- Configure port address translation with stateful return-flow mapping.
- Compare the platform's route preference or administrative distance before protocol metric.
- Choose the longest matching prefix, the /24 route, if it is usable.
- Always pick the route with the smallest numerical metric regardless of prefix length.
Explanation
Correct Answers
A:Correct principle. Route lookup selects the most specific matching prefix before comparing metrics across equal lengths. This is the justification for the selected network control: Choose the longest matching prefix, the /24 route, if it is usable.
B:Correct validation. A route lookup or capture confirms forwarding toward the /24 next hop. This is the directly measurable result of the control.
E:Correct control. Route lookup selects the most specific matching prefix before comparing metrics across equal lengths. It is the recommended implementation for this case.
Incorrect Answers
C:This is another scenario's control in the same domain: Multiple private hosts need outbound internet access through one public IPv4 address. It is not the best action for this case.
D:This belongs to the changed condition, not the current three-part answer: Two equal-length candidate routes come from protocols with different trust preferences. Administrative distance can select among competing information sources for the same prefix.
F:This control is invalid here. Metrics do not override longest-prefix match across different prefix lengths. It does not meet the specified requirement.
Question 201
An internal router receives the same destination prefix from OSPF and a competing external static source. Which action MOST directly meets the stated networking requirement?
- Select the route solely because it lists the highest TCP source port.
- Use the route source preference or administrative distance defined by the platform.
- Configure a static NAT mapping with explicit inbound protection.
- Evaluate that protocol's metric or equal-cost multipath policy.
Explanation
Correct Answer
B:Administrative distance determines which routing-source candidate wins for the same prefix. This specifically resolves: An internal router receives the same destination prefix from OSPF and a competing external static source.
Incorrect Answers
A:Transport source ports are not normal routing-protocol preference indicators. The suggested approach is: Select the route solely because it lists the highest TCP source port.
C:This addresses another problem in objective 2.1: An on-premises application needs one-to-one translation between its private address and a dedicated public address.
D:This action responds to a later condition: Two routes with equal preference arise inside the same routing protocol. Within-protocol metric comparison is different from choosing protocol source preference.
Question 202
An internal router receives the same destination prefix from OSPF and a competing external static source. A colleague instead suggests: Select the route solely because it lists the highest TCP source port. Which finding MOST specifically explains why that suggestion is unsuitable?
- NAT is not a substitute for firewall inspection or least-privilege policy.
- Within-protocol metric comparison is different from choosing protocol source preference.
- Administrative distance determines which routing-source candidate wins for the same prefix.
- Transport source ports are not normal routing-protocol preference indicators.
Explanation
Correct Answer
D:Transport source ports are not normal routing-protocol preference indicators. This flaw directly concerns the proposed action: Select the route solely because it lists the highest TCP source port.
Incorrect Answers
A:This flaw concerns a different case in objective 2.1: An on-premises application needs one-to-one translation between its private address and a dedicated public address. The current rejected proposal is: Select the route solely because it lists the highest TCP source port.
B:This rationale belongs to a later changed condition: Two routes with equal preference arise inside the same routing protocol.
C:This explains why the recommended control works: Use the route source preference or administrative distance defined by the platform.
Question 203
An internal router receives the same destination prefix from OSPF and a competing external static source. After applying the solution 'Use the route source preference or administrative distance defined by the platform.', which observation MOST directly proves that the requirement was met?
- Approval is recorded for 'Use the route source preference or administrative distance defined by the platform.' but no operational validation is performed.
- Failover testing keeps the virtual gateway reachable through the surviving router.
- From approved sources the mapped service responds, while blocked inbound paths remain denied.
- The installed route corresponds to the expected preferred source and intended next hop.
Explanation
Correct Answer
D:The installed route corresponds to the expected preferred source and intended next hop. It tests the intended outcome because administrative distance determines which routing-source candidate wins for the same prefix.
Incorrect Answers
A:The missing direct test is: The installed route corresponds to the expected preferred source and intended next hop.
B:This test addresses a separate problem: A router pair must preserve user access when the current default-gateway device fails.
C:This observation is for a different condition: An on-premises application needs one-to-one translation between its private address and a dedicated public address. It does not directly test the target outcome: An internal router receives the same destination prefix from OSPF and a competing external static source.
Question 204
The original case was: An internal router receives the same destination prefix from OSPF and a competing external static source. The requirement then changes: Two routes with equal preference arise inside the same routing protocol. Which revised action BEST meets this new condition?
- The installed route corresponds to the expected preferred source and intended next hop.
- Evaluate that protocol's metric or equal-cost multipath policy.
- Use the route source preference or administrative distance defined by the platform.
- Select the route solely because it lists the highest TCP source port.
Explanation
Correct Answer
B:Within-protocol metric comparison is different from choosing protocol source preference. The revised requirement is: Two routes with equal preference arise inside the same routing protocol. The appropriate action is: Evaluate that protocol's metric or equal-cost multipath policy.
Incorrect Answers
A:The installed route corresponds to the expected preferred source and intended next hop. The current requirement is: Two routes with equal preference arise inside the same routing protocol.
C:This is the original control. Administrative distance determines which routing-source candidate wins for the same prefix. It does not directly satisfy the revised requirement: Two routes with equal preference arise inside the same routing protocol.
D:Transport source ports are not normal routing-protocol preference indicators. It remains inappropriate in the revised context.
Question 205
Multiple private hosts need outbound internet access through one public IPv4 address. Which action MOST directly meets the stated networking requirement?
- Configure a supported first-hop redundancy protocol using a virtual gateway address.
- Configure port address translation with stateful return-flow mapping.
- Assign the same static private-to-public one-to-one mapping to every host.
- Use an approved static NAT mapping and security rules for that service.
Explanation
Correct Answer
B:PAT maps multiple source ports to a shared public address for concurrent sessions. This specifically resolves: Multiple private hosts need outbound internet access through one public IPv4 address.
Incorrect Answers
A:This addresses another problem in objective 2.1: A router pair must preserve user access when the current default-gateway device fails.
C:Duplicate one-to-one mappings cannot uniquely identify multiple internal connections. The suggested approach is: Assign the same static private-to-public one-to-one mapping to every host.
D:This action responds to a later condition: A single internal service must be consistently reachable from one fixed public IPv4 address. Static NAT provides a stable public-to-private address relationship when required.
Question 206
Multiple private hosts need outbound internet access through one public IPv4 address. A colleague instead suggests: Assign the same static private-to-public one-to-one mapping to every host. Which finding MOST specifically explains why that suggestion is unsuitable?
- PAT maps multiple source ports to a shared public address for concurrent sessions.
- Duplicate one-to-one mappings cannot uniquely identify multiple internal connections.
- Uncoordinated host gateways do not provide reliable transparent failover.
- Static NAT provides a stable public-to-private address relationship when required.
Explanation
Correct Answer
B:Duplicate one-to-one mappings cannot uniquely identify multiple internal connections. This flaw directly concerns the proposed action: Assign the same static private-to-public one-to-one mapping to every host.
Incorrect Answers
A:This explains why the recommended control works: Configure port address translation with stateful return-flow mapping.
C:This flaw concerns a different case in objective 2.1: A router pair must preserve user access when the current default-gateway device fails. The current rejected proposal is: Assign the same static private-to-public one-to-one mapping to every host.
D:This rationale belongs to a later changed condition: A single internal service must be consistently reachable from one fixed public IPv4 address.
Question 207
Multiple private hosts need outbound internet access through one public IPv4 address. After applying the solution 'Configure port address translation with stateful return-flow mapping.', which observation MOST directly proves that the requirement was met?
- Simultaneous test sessions appear with distinct translated source ports and complete return traffic.
- Approval is recorded for 'Configure port address translation with stateful return-flow mapping.' but no operational validation is performed.
- Failover testing keeps the virtual gateway reachable through the surviving router.
- Each VLAN reaches its own subinterface gateway while inter-VLAN policy is enforced.
Explanation
Correct Answer
A:Simultaneous test sessions appear with distinct translated source ports and complete return traffic. It tests the intended outcome because pat maps multiple source ports to a shared public address for concurrent sessions.
Incorrect Answers
B:The missing direct test is: Simultaneous test sessions appear with distinct translated source ports and complete return traffic.
C:This observation is for a different condition: A router pair must preserve user access when the current default-gateway device fails. It does not directly test the target outcome: Multiple private hosts need outbound internet access through one public IPv4 address.
D:This test addresses a separate problem: One physical uplink carries traffic for three routed VLANs to a router with no separate physical ports.
Question 208
The original case was: Multiple private hosts need outbound internet access through one public IPv4 address. The requirement then changes: A single internal service must be consistently reachable from one fixed public IPv4 address. Which revised action BEST meets this new condition?
- Use an approved static NAT mapping and security rules for that service.
- Simultaneous test sessions appear with distinct translated source ports and complete return traffic.
- Configure port address translation with stateful return-flow mapping.
- Assign the same static private-to-public one-to-one mapping to every host.
Explanation
Correct Answer
A:Static NAT provides a stable public-to-private address relationship when required. The revised requirement is: A single internal service must be consistently reachable from one fixed public IPv4 address. The appropriate action is: Use an approved static NAT mapping and security rules for that service.
Incorrect Answers
B:Simultaneous test sessions appear with distinct translated source ports and complete return traffic. The current requirement is: A single internal service must be consistently reachable from one fixed public IPv4 address.
C:This is the original control. PAT maps multiple source ports to a shared public address for concurrent sessions. It does not directly satisfy the revised requirement: A single internal service must be consistently reachable from one fixed public IPv4 address.
D:Duplicate one-to-one mappings cannot uniquely identify multiple internal connections. It remains inappropriate in the revised context.
Question 209
An on-premises application needs one-to-one translation between its private address and a dedicated public address. Which action MOST directly meets the stated networking requirement?
- Configure a static NAT mapping with explicit inbound protection.
- Use 802.1Q-tagged router subinterfaces with unique IP gateways per VLAN.
- Assume address translation alone automatically blocks malicious inbound application requests.
- Use PAT for many-to-one outbound source translation.
Explanation
Correct Answer
A:Static NAT consistently maps addresses while firewall policy restricts reachability. This specifically resolves: An on-premises application needs one-to-one translation between its private address and a dedicated public address.
Incorrect Answers
B:This addresses another problem in objective 2.1: One physical uplink carries traffic for three routed VLANs to a router with no separate physical ports.
C:NAT is not a substitute for firewall inspection or least-privilege policy. The suggested approach is: Assume address translation alone automatically blocks malicious inbound application requests.
D:This action responds to a later condition: The organization wants hundreds of clients to share a single outgoing address. Port mapping supports concurrent translations for many clients.
Question 210
An on-premises application needs one-to-one translation between its private address and a dedicated public address. A colleague instead suggests: Assume address translation alone automatically blocks malicious inbound application requests. Which finding MOST specifically explains why that suggestion is unsuitable?
- Shared addressing prevents correct routing and segmentation per VLAN.
- NAT is not a substitute for firewall inspection or least-privilege policy.
- Static NAT consistently maps addresses while firewall policy restricts reachability.
- Port mapping supports concurrent translations for many clients.
Explanation
Correct Answer
B:NAT is not a substitute for firewall inspection or least-privilege policy. This flaw directly concerns the proposed action: Assume address translation alone automatically blocks malicious inbound application requests.
Incorrect Answers
A:This flaw concerns a different case in objective 2.1: One physical uplink carries traffic for three routed VLANs to a router with no separate physical ports. The current rejected proposal is: Assume address translation alone automatically blocks malicious inbound application requests.
C:This explains why the recommended control works: Configure a static NAT mapping with explicit inbound protection.
D:This rationale belongs to a later changed condition: The organization wants hundreds of clients to share a single outgoing address.