Cisco 500-220 Practice Test 7
Question 60
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A contractor may deploy one warehouse switch but must not alter headquarters MX routing. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Audit network role assignments and test event viewing separately from actual change permissions.
- Inspect the configured collector, export transport, sampling context and observed flow keys for a controlled session.
- Inventory required site-to-site flows and evaluate peer topology against supported appliance scale.
- Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team.
- Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
Explanation
Correct Answers
A:The discriminating evidence is: Audit network role assignments and test event viewing separately from actual change permissions.
D:The targeted next step is: Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of NetFlow export and traffic visibility limits, not the specific Network-level privileges and separation of duties requirement. For this scenario, the proper response is: Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team. Verify it through: Audit network role assignments and test event viewing separately from actual change permissions.
C:That evidence is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific Network-level privileges and separation of duties requirement.
E:That evidence is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Network-level privileges and separation of duties requirement.
Question 61
A Cisco Meraki deployment engineer investigates this operational case: An operator selects a security-appliance-only network and cannot find wireless SSID settings for the building's MR fleet. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team.
- Read the current setting and keep a before/after audit when applying API configuration changes across many networks.
- Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
- Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
Explanation
Correct Answer
C:The targeted next step is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. The technical reason is: Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Combined networks and device role visibility requirement.
B:That action is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Combined networks and device role visibility requirement.
D:That action is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Combined networks and device role visibility requirement.
Question 62
A peer reviewer evaluates the following Meraki case. An operator selects a security-appliance-only network and cannot find wireless SSID settings for the building's MR fleet. The proposed action is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. Which technical principle BEST supports this decision? Select ONE best answer.
- VLANs separate layer-2 broadcast domains, while access between them requires a suitable routed and policy-controlled boundary.
- Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.
- Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope.
- Virtual appliance capacity and cloud-region availability are design constraints distinct from simply adding more Auto VPN spokes.
Explanation
Correct Answer
C:Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope. In this situation (An operator selects a security-appliance-only network and cannot find wireless SSID settings for the building's MR fleet.), it justifies the action: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Combined networks and device role visibility requirement.
B:That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Combined networks and device role visibility requirement. For this scenario, the proper response is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
D:That principle is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Combined networks and device role visibility requirement.
Question 63
A Meraki support engineer must distinguish facts from assumptions. An operator selects a security-appliance-only network and cannot find wireless SSID settings for the building's MR fleet. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Check organization inventory, device serial assignment and the target network's product types before moving hardware.
- Compare the network type and inventory with the configuration tabs requested by operations.
- Audit network role assignments and test event viewing separately from actual change permissions.
- Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
Explanation
Correct Answer
B:The discriminating evidence is: Compare the network type and inventory with the configuration tabs requested by operations. Expected result: The correct devices and product-specific settings are visible without moving unrelated organizational assets.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific Combined networks and device role visibility requirement. For this scenario, the proper response is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
C:That evidence is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Combined networks and device role visibility requirement.
D:That evidence is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Combined networks and device role visibility requirement.
Question 64
An implementation lead needs a measurable acceptance criterion for a Meraki change. An operator selects a security-appliance-only network and cannot find wireless SSID settings for the building's MR fleet. The proposed validation is: Compare the network type and inventory with the configuration tabs requested by operations. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Read-only responders access required diagnostics without the ability to alter production firewall or SSID policy.
- The new device appears under the intended tenant and network while unrelated customer assets stay separated.
- The correct devices and product-specific settings are visible without moving unrelated organizational assets.
- Known users or devices receive the intended network assignment while unknown devices remain isolated.
Explanation
Correct Answer
C:The acceptance criterion is: The correct devices and product-specific settings are visible without moving unrelated organizational assets. Verify it using: Compare the network type and inventory with the configuration tabs requested by operations.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Combined networks and device role visibility requirement.
B:That outcome is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific Combined networks and device role visibility requirement. For this scenario, the proper response is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
D:That outcome is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Combined networks and device role visibility requirement.
Question 65
A Meraki operations reviewer examines this case. An operator selects a security-appliance-only network and cannot find wireless SSID settings for the building's MR fleet. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Claim a customer's device into a shared unrelated organization merely to speed deployment.
- Treat a co-term organization as if every AP necessarily has its own unrelated license expiration clock.
- Conclude that missing Wireless controls prove an MX firmware defect when the network contains only a security appliance.
- Set an SSID limit to a higher figure and assume it increases the ISP's purchased service rate.
Explanation
Correct Answer
C:It conflicts with the relevant behavior: Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Organization and network hierarchy in Dashboard), but it is not the shortcut tied most directly to this incident.
B:That proposal is unsafe in its own context (the separate topic of Co-termination licensing compliance and common expiration), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Combined networks and device role visibility: Conclude that missing Wireless controls prove an MX firmware defect when the network contains only a security appliance.
D:That proposal is unsafe in its own context (the separate topic of MR SSID traffic shaping for application bandwidth), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Combined networks and device role visibility: Conclude that missing Wireless controls prove an MX firmware defect when the network contains only a security appliance.
Question 66
A Cisco Meraki deployment engineer investigates this operational case: A branch deployment uses separate switch and wireless networks and engineering wants a coordinated combined view of local assets. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
- Correlate a Meraki Dashboard alert with device event timestamps and a controlled client test before escalating a site outage.
- Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale.
- Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
Explanation
Correct Answer
D:The targeted next step is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. The technical reason is: Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope. A successful verification would use: Compare the network type and inventory with the configuration tabs requested by operations.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific Combined networks and device role visibility requirement.
B:That action is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific Combined networks and device role visibility requirement.
C:That action is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific Combined networks and device role visibility requirement.
Question 67
A peer reviewer evaluates the following Meraki case. A branch deployment uses separate switch and wireless networks and engineering wants a coordinated combined view of local assets. The proposed action is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. Which technical principle BEST supports this decision? Select ONE best answer.
- The security appliance's network-layer firewall policy does not by itself complete endpoint EAP authentication at a switch or WLAN port.
- Bulk Meraki configuration workflows can reduce request load but need individual operation outcomes and appropriate safety gates.
- Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.
- Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope.
Explanation
Correct Answer
D:Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope. In this situation (A branch deployment uses separate switch and wireless networks and engineering wants a coordinated combined view of local assets.), it justifies the action: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific Combined networks and device role visibility requirement.
B:That principle is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Combined networks and device role visibility requirement.
C:That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Combined networks and device role visibility requirement. For this scenario, the proper response is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. Verify it through: Compare the network type and inventory with the configuration tabs requested by operations.
Question 68
A Meraki support engineer must distinguish facts from assumptions. A branch deployment uses separate switch and wireless networks and engineering wants a coordinated combined view of local assets. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare the network type and inventory with the configuration tabs requested by operations.
- Verify DHCP server identity, snooping trust, STP status and a test rogue server scenario where supported.
- Compare consecutive octet/error counter values, interface speed and timestamps from a known monitoring period.
- Check organization inventory, device serial assignment and the target network's product types before moving hardware.
Explanation
Correct Answer
A:The discriminating evidence is: Compare the network type and inventory with the configuration tabs requested by operations. Expected result: The correct devices and product-specific settings are visible without moving unrelated organizational assets.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Combined networks and device role visibility requirement.
C:That evidence is relevant to the distinct Meraki subject of SNMP telemetry and counter interpretation, not the specific Combined networks and device role visibility requirement.
D:That evidence is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific Combined networks and device role visibility requirement. For this scenario, the proper response is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. Verify it through: Compare the network type and inventory with the configuration tabs requested by operations.
Question 69
An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch deployment uses separate switch and wireless networks and engineering wants a coordinated combined view of local assets. The proposed validation is: Compare the network type and inventory with the configuration tabs requested by operations. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Real rogue devices are investigated while legitimate neighboring wireless networks are not disrupted without evidence.
- The correct devices and product-specific settings are visible without moving unrelated organizational assets.
- The approved retention interval is verifiably met or a documented capacity gap triggers a redesign.
- The new device appears under the intended tenant and network while unrelated customer assets stay separated.
Explanation
Correct Answer
B:The acceptance criterion is: The correct devices and product-specific settings are visible without moving unrelated organizational assets. Verify it using: Compare the network type and inventory with the configuration tabs requested by operations. The associated corrective action is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific Combined networks and device role visibility requirement.
C:That outcome is relevant to the distinct Meraki subject of MV camera retention and storage planning, not the specific Combined networks and device role visibility requirement.
D:That outcome is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific Combined networks and device role visibility requirement. For this scenario, the proper response is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network. Verify it through: Compare the network type and inventory with the configuration tabs requested by operations.
Question 70
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch deployment uses separate switch and wireless networks and engineering wants a coordinated combined view of local assets. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
- Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
- Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.
- Compare exact model, reported firmware, release notes and supported configuration options.
- Compare the network type and inventory with the configuration tabs requested by operations.
Explanation
Correct Answers
B:The targeted next step is: Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
E:The discriminating evidence is: Compare the network type and inventory with the configuration tabs requested by operations.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Combined networks and device role visibility requirement.
C:That evidence is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific Combined networks and device role visibility requirement.
D:That evidence is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific Combined networks and device role visibility requirement.