Cisco 500-220 Practice Test 5
Question 40
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An MR powers on but cannot reach the cloud; a field worker has local access and wants to check its IP settings before cabling changes. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Review supported platform mode, routing configuration, neighbor status and learned prefixes in the designated topology.
- Connect through the approved local management path and compare local uplink tests with remote Dashboard status.
- Check vMX Dashboard enrollment, cloud deployment, routes and cloud-side permitted traffic for a branch-to-cloud flow.
- Use the local device status page for uplink and basic device diagnostics when the remote Dashboard is inaccessible, subject to model capabilities.
- Compare target network identifiers, prior setting, API method/status, change history and a sample traffic test.
Explanation
Correct Answers
B:The discriminating evidence is: Connect through the approved local management path and compare local uplink tests with remote Dashboard status.
D:The targeted next step is: Use the local device status page for uplink and basic device diagnostics when the remote Dashboard is inaccessible, subject to model capabilities.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Local status page versus cloud Dashboard troubleshooting requirement.
C:That evidence is relevant to the distinct Meraki subject of vMX private cloud connectivity and deployment mode, not the specific Local status page versus cloud Dashboard troubleshooting requirement.
E:That evidence is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Local status page versus cloud Dashboard troubleshooting requirement.
Question 41
A Cisco Meraki deployment engineer investigates this operational case: A managed service provider sees a new MR under the lab organization's inventory rather than the client's production site. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team.
- Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
- Claim a customer's device into a shared unrelated organization merely to speed deployment.
- Choose appropriate RF profiles and channel-width settings based on survey and client radio capabilities.
Explanation
Correct Answer
B:The targeted next step is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network. The technical reason is: An organization contains networks and global administration; claiming a device to the wrong organization changes its management context.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Organization and network hierarchy in Dashboard requirement.
C:This is an unsafe shortcut: Claim a customer's device into a shared unrelated organization merely to speed deployment. It does not establish the needed behavior: An organization contains networks and global administration; claiming a device to the wrong organization changes its management context. The controlled response is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
D:That action is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific Organization and network hierarchy in Dashboard requirement.
Question 42
A peer reviewer evaluates the following Meraki case. A managed service provider sees a new MR under the lab organization's inventory rather than the client's production site. The proposed action is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network. Which technical principle BEST supports this decision? Select ONE best answer.
- Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.
- Static routes require valid destinations and next hops; a firewall allow rule alone cannot repair absent routing.
- An organization contains networks and global administration; claiming a device to the wrong organization changes its management context.
- BGP route propagation requires a supported device and configuration and explicit policies; a working VPN tunnel alone does not prove BGP exchange.
Explanation
Correct Answer
C:An organization contains networks and global administration; claiming a device to the wrong organization changes its management context. In this situation (A managed service provider sees a new MR under the lab organization's inventory rather than the client's production site.), it justifies the action: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Organization and network hierarchy in Dashboard requirement.
B:That principle is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific Organization and network hierarchy in Dashboard requirement.
D:That principle is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Organization and network hierarchy in Dashboard requirement. For this scenario, the proper response is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
Question 43
A Meraki support engineer must distinguish facts from assumptions. A managed service provider sees a new MR under the lab organization's inventory rather than the client's production site. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Check organization inventory, device serial assignment and the target network's product types before moving hardware.
- Compare the network type and inventory with the configuration tabs requested by operations.
- Compare planned branch traffic aggregate, supported vMX scale, instance placement and failover path against requirements.
- Compare Dashboard online status, management DNS reachability and a same-VLAN client test during the same interval.
Explanation
Correct Answer
A:The discriminating evidence is: Check organization inventory, device serial assignment and the target network's product types before moving hardware. Expected result: The new device appears under the intended tenant and network while unrelated customer assets stay separated.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Organization and network hierarchy in Dashboard requirement.
C:That evidence is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Organization and network hierarchy in Dashboard requirement.
D:That evidence is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific Organization and network hierarchy in Dashboard requirement.
Question 44
An implementation lead needs a measurable acceptance criterion for a Meraki change. A managed service provider sees a new MR under the lab organization's inventory rather than the client's production site. The proposed validation is: Check organization inventory, device serial assignment and the target network's product types before moving hardware. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The remote collector receives the expected event with correct device and time metadata.
- Read-only responders access required diagnostics without the ability to alter production firewall or SSID policy.
- The new device appears under the intended tenant and network while unrelated customer assets stay separated.
- Wireless capacity improves without disconnecting supported older clients or causing additional co-channel contention.
Explanation
Correct Answer
C:The acceptance criterion is: The new device appears under the intended tenant and network while unrelated customer assets stay separated. Verify it using: Check organization inventory, device serial assignment and the target network's product types before moving hardware.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific Organization and network hierarchy in Dashboard requirement.
B:That outcome is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Organization and network hierarchy in Dashboard requirement. For this scenario, the proper response is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
D:That outcome is relevant to the distinct Meraki subject of MR RF profiles and channel width optimization, not the specific Organization and network hierarchy in Dashboard requirement.
Question 45
A Meraki operations reviewer examines this case. A managed service provider sees a new MR under the lab organization's inventory rather than the client's production site. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Assume any camera that lacks a push alert must have lost all locally recorded video.
- Conclude that missing Wireless controls prove an MX firmware defect when the network contains only a security appliance.
- Claim a customer's device into a shared unrelated organization merely to speed deployment.
- Reset every organization's Auto VPN tunnel whenever one local application fails.
Explanation
Correct Answer
C:It conflicts with the relevant behavior: An organization contains networks and global administration; claiming a device to the wrong organization changes its management context.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of MV smart camera video availability and alert settings), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Organization and network hierarchy in Dashboard: Claim a customer's device into a shared unrelated organization merely to speed deployment.
B:That proposal is unsafe in its own context (the separate topic of Combined networks and device role visibility), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Organization and network hierarchy in Dashboard: Claim a customer's device into a shared unrelated organization merely to speed deployment.
D:That proposal is unsafe in its own context (the separate topic of Auto VPN peer tunnel health and route advertisement), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Organization and network hierarchy in Dashboard: Claim a customer's device into a shared unrelated organization merely to speed deployment.
Question 46
A Cisco Meraki deployment engineer investigates this operational case: A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Check report scope, date range, timezone and included networks before comparing historical usage summaries.
- Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
- Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
- Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
Explanation
Correct Answer
C:The targeted next step is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network. The technical reason is: An organization contains networks and global administration; claiming a device to the wrong organization changes its management context. A successful verification would use: Check organization inventory, device serial assignment and the target network's product types before moving hardware.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific Organization and network hierarchy in Dashboard requirement.
B:That action is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Organization and network hierarchy in Dashboard requirement.
D:That action is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Organization and network hierarchy in Dashboard requirement.
Question 47
A peer reviewer evaluates the following Meraki case. A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier. The proposed action is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network. Which technical principle BEST supports this decision? Select ONE best answer.
- An organization contains networks and global administration; claiming a device to the wrong organization changes its management context.
- BGP route propagation requires a supported device and configuration and explicit policies; a working VPN tunnel alone does not prove BGP exchange.
- Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope.
- Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
Explanation
Correct Answer
A:An organization contains networks and global administration; claiming a device to the wrong organization changes its management context. In this situation (A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier.), it justifies the action: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Organization and network hierarchy in Dashboard requirement. For this scenario, the proper response is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network. Verify it through: Check organization inventory, device serial assignment and the target network's product types before moving hardware.
C:That principle is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Organization and network hierarchy in Dashboard requirement.
D:That principle is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Organization and network hierarchy in Dashboard requirement.
Question 48
A Meraki support engineer must distinguish facts from assumptions. A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration.
- Check organization inventory, device serial assignment and the target network's product types before moving hardware.
- Verify DHCP server identity, snooping trust, STP status and a test rogue server scenario where supported.
- Audit network role assignments and test event viewing separately from actual change permissions.
Explanation
Correct Answer
B:Applied to the described situation (A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier.), it should establish: The new device appears under the intended tenant and network while unrelated customer assets stay separated.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Organization and network hierarchy in Dashboard requirement.
C:That evidence is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Organization and network hierarchy in Dashboard requirement.
D:That evidence is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Organization and network hierarchy in Dashboard requirement.
Question 49
An implementation lead needs a measurable acceptance criterion for a Meraki change. A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier. The proposed validation is: Check organization inventory, device serial assignment and the target network's product types before moving hardware. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Only justified site pairs establish the needed encrypted paths while large branch fleets remain manageable.
- Voice stays intelligible while bulk traffic shares the link according to the approved policy.
- Read-only responders access required diagnostics without the ability to alter production firewall or SSID policy.
- The new device appears under the intended tenant and network while unrelated customer assets stay separated.
Explanation
Correct Answer
D:The acceptance criterion is: The new device appears under the intended tenant and network while unrelated customer assets stay separated. Verify it using: Check organization inventory, device serial assignment and the target network's product types before moving hardware. The associated corrective action is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific Organization and network hierarchy in Dashboard requirement.
B:That outcome is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific Organization and network hierarchy in Dashboard requirement.
C:That outcome is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Organization and network hierarchy in Dashboard requirement. For this scenario, the proper response is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network. Verify it through: Check organization inventory, device serial assignment and the target network's product types before moving hardware.
Question 50
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A company has multiple Dashboard networks for branches and the technician tries to assign a switch to the wrong branch identifier. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Inspect client MAC or identifier, association times, event severity and a reproducible application failure.
- Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
- Review response headers, per-organization request rate and retry behavior in a controlled test.
- Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.
- Check organization inventory, device serial assignment and the target network's product types before moving hardware.
Explanation
Correct Answers
B:The targeted next step is: Place devices in the correct organization and network, then confirm the operational team can see the relevant network.
E:The discriminating evidence is: Check organization inventory, device serial assignment and the target network's product types before moving hardware. Expected result: The new device appears under the intended tenant and network while unrelated customer assets stay separated.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Dashboard client timeline and event filtering, not the specific Organization and network hierarchy in Dashboard requirement.
C:That evidence is relevant to the distinct Meraki subject of Dashboard API organization rate limiting and retry, not the specific Organization and network hierarchy in Dashboard requirement.
D:That evidence is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Organization and network hierarchy in Dashboard requirement.