Cisco 500-220 Practice Test 63
Question 620
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
- Review RADIUS logs, EAP rejection codes, client certificate and the assigned VLAN of a known-good peer.
- Enable VPN participation for only authorized local subnets and verify advertised remote paths.
- Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
Explanation
Correct Answers
B:The targeted next step is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. The technical reason is: Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality. A successful verification would use: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
E:The discriminating evidence is: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Meraki Insight application health and WAN visibility requirement.
C:That evidence is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Meraki Insight application health and WAN visibility requirement.
D:That action is relevant to the distinct Meraki subject of MX Auto VPN participation for selected VLANs, not the specific Meraki Insight application health and WAN visibility requirement.
Question 621
A Cisco Meraki deployment engineer investigates this operational case: A datacenter has stable VPN tunnels but one monitored SaaS application's availability drops during peak use. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Define application performance thresholds from a justified baseline and verify representative alarms.
- Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
- Assess cloud vMX instance size, supported throughput and regional redundancy before consolidating many branches onto one headend.
- Use supported action batching or templates for repetitive network changes while monitoring per-action validation results.
Explanation
Correct Answer
B:The targeted next step is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. Verify it through: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
C:That action is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Meraki Insight application health and WAN visibility requirement.
D:That action is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Meraki Insight application health and WAN visibility requirement.
Question 622
A peer reviewer evaluates the following Meraki case. A datacenter has stable VPN tunnels but one monitored SaaS application's availability drops during peak use. The proposed action is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. Which technical principle BEST supports this decision? Select ONE best answer.
- Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
- Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality.
- Traffic shaping can prioritize or constrain matching traffic; it does not increase the physical capacity of a saturated uplink.
- 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
Explanation
Correct Answer
B:Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality. In this situation (A datacenter has stable VPN tunnels but one monitored SaaS application's availability drops during peak use.), it justifies the action: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. Verify it through: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
C:That principle is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Meraki Insight application health and WAN visibility requirement.
D:That principle is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Meraki Insight application health and WAN visibility requirement.
Question 623
A Meraki support engineer must distinguish facts from assumptions. A datacenter has stable VPN tunnels but one monitored SaaS application's availability drops during peak use. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
- Compare baseline application response measurements, configured thresholds and controlled warning events.
- Review action-batch status, failed operations, resulting template bindings and a sample target configuration.
- Compare detected BSSID, wired connection context, security classification and approved response policy.
Explanation
Correct Answer
A:The discriminating evidence is: Correlate application response time, observed path latency/loss and affected clients over the same incident interval. Expected result: The investigation distinguishes WAN degradation from application-server delays with supporting measurements.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. Verify it through: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
C:That evidence is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Meraki Insight application health and WAN visibility requirement.
D:That evidence is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific Meraki Insight application health and WAN visibility requirement.
Question 624
An implementation lead needs a measurable acceptance criterion for a Meraki change. A datacenter has stable VPN tunnels but one monitored SaaS application's availability drops during peak use. The proposed validation is: Correlate application response time, observed path latency/loss and affected clients over the same incident interval. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The investigation distinguishes WAN degradation from application-server delays with supporting measurements.
- Alerts highlight meaningful degradations without flooding operations during ordinary demand changes.
- The spoke uses its documented secondary path and restores application reachability without manual VPN reconfiguration.
- Guest endpoints stay isolated while authorized staff reach only specified internal resources.
Explanation
Correct Answer
A:The acceptance criterion is: The investigation distinguishes WAN degradation from application-server delays with supporting measurements. Verify it using: Correlate application response time, observed path latency/loss and affected clients over the same incident interval. The associated corrective action is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. Verify it through: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
C:That outcome is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Meraki Insight application health and WAN visibility requirement.
D:That outcome is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Meraki Insight application health and WAN visibility requirement.
Question 625
A Meraki operations reviewer examines this case. A datacenter has stable VPN tunnels but one monitored SaaS application's availability drops during peak use. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Configure an alert threshold below normal response time and claim every resulting alarm is a production incident.
- Treat a green WAN interface indicator as proof the path meets every application's quality requirement.
- Declare an application healthy solely because its MX is marked online in the cloud dashboard.
- Force every AP onto one wide 5 GHz channel to avoid any roaming complexity.
Explanation
Correct Answer
C:It conflicts with the relevant behavior: Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Meraki Insight application threshold and alert tuning), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Meraki Insight application health and WAN visibility: Declare an application healthy solely because its MX is marked online in the cloud dashboard.
B:That proposal is unsafe in its own context (the separate topic of Brownout versus hard WAN link-down detection), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Meraki Insight application health and WAN visibility: Declare an application healthy solely because its MX is marked online in the cloud dashboard.
D:That proposal is unsafe in its own context (the separate topic of MR RF profiles and channel width optimization), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Meraki Insight application health and WAN visibility: Declare an application healthy solely because its MX is marked online in the cloud dashboard.
Question 626
A Cisco Meraki deployment engineer investigates this operational case: A support team wants to alert on unusually slow checkout transactions but has no baseline for the site's normal latency. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Correlate wireless retries, signal, channel interference and authentication stage for affected clients.
- Define application performance thresholds from a justified baseline and verify representative alarms.
- Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
- Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
Explanation
Correct Answer
B:Define application performance thresholds from a justified baseline and verify representative alarms. The technical reason is: Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts. A successful verification would use: Compare baseline application response measurements, configured thresholds and controlled warning events.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MR wireless RF interference and roaming diagnosis, not the specific Meraki Insight application threshold and alert tuning requirement.
C:That action is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Meraki Insight application threshold and alert tuning requirement.
D:That action is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Meraki Insight application threshold and alert tuning requirement.
Question 627
A peer reviewer evaluates the following Meraki case. A support team wants to alert on unusually slow checkout transactions but has no baseline for the site's normal latency. The proposed action is: Define application performance thresholds from a justified baseline and verify representative alarms. Which technical principle BEST supports this decision? Select ONE best answer.
- Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
- 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
- Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality.
- Enterprise access requires compatible security and backend identity controls; simply hiding an SSID is not authentication.
Explanation
Correct Answer
A:Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts. In this situation (A support team wants to alert on unusually slow checkout transactions but has no baseline for the site's normal latency.), it justifies the action: Define application performance thresholds from a justified baseline and verify representative alarms.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Meraki Insight application threshold and alert tuning requirement.
C:That principle is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Meraki Insight application threshold and alert tuning requirement.
D:That principle is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Meraki Insight application threshold and alert tuning requirement.
Question 628
A Meraki support engineer must distinguish facts from assumptions. A support team wants to alert on unusually slow checkout transactions but has no baseline for the site's normal latency. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare baseline application response measurements, configured thresholds and controlled warning events.
- Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
- Compare configured WAN bandwidth, usage peaks, rule matches and quality metrics during a controlled load test.
- Inspect MS port configuration, VLAN tags, native VLAN choices and the endpoint's resulting IP lease.
Explanation
Correct Answer
A:The discriminating evidence is: Compare baseline application response measurements, configured thresholds and controlled warning events. Expected result: Alerts highlight meaningful degradations without flooding operations during ordinary demand changes.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Meraki Insight application threshold and alert tuning requirement.
C:That evidence is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Meraki Insight application threshold and alert tuning requirement.
D:That evidence is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific Meraki Insight application threshold and alert tuning requirement.
Question 629
An implementation lead needs a measurable acceptance criterion for a Meraki change. A support team wants to alert on unusually slow checkout transactions but has no baseline for the site's normal latency. The proposed validation is: Compare baseline application response measurements, configured thresholds and controlled warning events. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The broader upgrade proceeds only after pilot wireless services meet agreed compatibility checks.
- The investigation distinguishes WAN degradation from application-server delays with supporting measurements.
- The remote internal subnet becomes reachable through the correct next hop without diverting unrelated traffic.
- Alerts highlight meaningful degradations without flooding operations during ordinary demand changes.
Explanation
Correct Answer
D:The acceptance criterion is: Alerts highlight meaningful degradations without flooding operations during ordinary demand changes. Verify it using: Compare baseline application response measurements, configured thresholds and controlled warning events. The associated corrective action is: Define application performance thresholds from a justified baseline and verify representative alarms.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific Meraki Insight application threshold and alert tuning requirement.
B:That outcome is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Meraki Insight application threshold and alert tuning requirement.
C:That outcome is relevant to the distinct Meraki subject of MX static routes to downstream layer three network, not the specific Meraki Insight application threshold and alert tuning requirement.
Question 630
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A support team wants to alert on unusually slow checkout transactions but has no baseline for the site's normal latency. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare firmware targets, pilot client association, retries, roaming and change-window results.
- Verify MV camera power, network and configured alert rules before treating a missing motion notification as lost video.
- Define application performance thresholds from a justified baseline and verify representative alarms.
- Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
- Compare baseline application response measurements, configured thresholds and controlled warning events.
Explanation
Correct Answers
C:The targeted next step is: Define application performance thresholds from a justified baseline and verify representative alarms. The technical reason is: Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
E:The discriminating evidence is: Compare baseline application response measurements, configured thresholds and controlled warning events.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific Meraki Insight application threshold and alert tuning requirement.
B:That action is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Meraki Insight application threshold and alert tuning requirement.
D:That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Meraki Insight application threshold and alert tuning requirement.