cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 62

Question 610

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A clinic needs thirty days of usable video and considers higher bitrate recording on small-storage cameras. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
  2. Compare alert history, device online status and matching client or uplink events during the incident window.
  3. Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.
  4. Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.
  5. Write targeted network and application controls and verify the specific matched traffic using Security Center and event logs.

Explanation

Correct Answers

A:

The targeted next step is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings. The technical reason is: MV retention depends on supported device storage, recording and quality settings; long retention cannot be promised without capacity assessment. A successful verification would use: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

C:

The discriminating evidence is: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific MV camera retention and storage planning requirement.

D:

That action is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific MV camera retention and storage planning requirement.

E:

That action is relevant to the distinct Meraki subject of MX layer three and layer seven security filtering, not the specific MV camera retention and storage planning requirement.

Question 611

A Cisco Meraki deployment engineer investigates this operational case: A warehouse changes motion-based recording to continuous capture and then loses older clips faster than planned. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
  2. Verify MV camera power, network and configured alert rules before treating a missing motion notification as lost video.
  3. Set a switch access port to the required VLAN and use supported tagged trunk connections for multi-VLAN uplinks.
  4. Use a small controlled pilot with documented acceptance checks before rolling an organization-wide Meraki configuration change.

Explanation

Correct Answer

A:

The targeted next step is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MV camera retention and storage planning requirement. For this scenario, the proper response is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings. Verify it through: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

C:

That action is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific MV camera retention and storage planning requirement.

D:

That action is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific MV camera retention and storage planning requirement.

Question 612

A peer reviewer evaluates the following Meraki case. A warehouse changes motion-based recording to continuous capture and then loses older clips faster than planned. The proposed action is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Manual overrides and template changes can produce drift that must be identified against a recorded baseline.
  2. MV retention depends on supported device storage, recording and quality settings; long retention cannot be promised without capacity assessment.
  3. Camera recording and alerts are separate functions; a notification can fail despite accessible captured video or healthy camera connectivity.
  4. Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.

Explanation

Correct Answer

B:

MV retention depends on supported device storage, recording and quality settings; long retention cannot be promised without capacity assessment. In this situation (A warehouse changes motion-based recording to continuous capture and then loses older clips faster than planned.), it justifies the action: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific MV camera retention and storage planning requirement.

C:

That principle is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MV camera retention and storage planning requirement. For this scenario, the proper response is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings. Verify it through: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

D:

That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific MV camera retention and storage planning requirement.

Question 613

A Meraki support engineer must distinguish facts from assumptions. A warehouse changes motion-based recording to continuous capture and then loses older clips faster than planned. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Inspect client MAC or identifier, association times, event severity and a reproducible application failure.
  2. Review camera online status, playback retention, motion-event rule and destination notification settings.
  3. Compare old and replacement serial numbers, inventory state, Dashboard license status and authorized vendor RMA documentation.
  4. Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

Explanation

Correct Answer

D:

The discriminating evidence is: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test. Expected result: The approved retention interval is verifiably met or a documented capacity gap triggers a redesign.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Dashboard client timeline and event filtering, not the specific MV camera retention and storage planning requirement.

B:

That evidence is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MV camera retention and storage planning requirement. For this scenario, the proper response is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings. Verify it through: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

C:

That evidence is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific MV camera retention and storage planning requirement.

Question 614

An implementation lead needs a measurable acceptance criterion for a Meraki change. A warehouse changes motion-based recording to continuous capture and then loses older clips faster than planned. The proposed validation is: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The approved retention interval is verifiably met or a documented capacity gap triggers a redesign.
  2. The advertised destination appears through an unambiguous VPN route and the tested application reaches the proper site.
  3. Required video evidence remains accessible and alerts fire only for the intended conditions.
  4. Legitimate clients receive approved addresses while untrusted DHCP offers are constrained.

Explanation

Correct Answer

A:

The acceptance criterion is: The approved retention interval is verifiably met or a documented capacity gap triggers a redesign. Verify it using: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test. The associated corrective action is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of Auto VPN subnet advertisement and overlap, not the specific MV camera retention and storage planning requirement.

C:

That outcome is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific MV camera retention and storage planning requirement. For this scenario, the proper response is: Plan video retention against model capabilities, recording mode and compliance requirements before changing settings. Verify it through: Inspect video storage estimates, frame and resolution choices and the oldest available clip during a test.

D:

That outcome is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific MV camera retention and storage planning requirement.

Question 615

A Meraki operations reviewer examines this case. A warehouse changes motion-based recording to continuous capture and then loses older clips faster than planned. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Assume BGP automatically advertises all private networks from any device plugged into the VPN hub.
  2. Configure an alert threshold below normal response time and claim every resulting alarm is a production incident.
  3. Promise a full year of continuous high-resolution video on any camera without checking its storage.
  4. Assume any camera that lacks a push alert must have lost all locally recorded video.

Explanation

Correct Answer

C:

It conflicts with the relevant behavior: MV retention depends on supported device storage, recording and quality settings; long retention cannot be promised without capacity assessment.

Incorrect Answers

A:

That proposal is unsafe in its own context (the separate topic of BGP route exchange at VPN hub and datacenter), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MV camera retention and storage planning: Promise a full year of continuous high-resolution video on any camera without checking its storage.

B:

That proposal is unsafe in its own context (the separate topic of Meraki Insight application threshold and alert tuning), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MV camera retention and storage planning: Promise a full year of continuous high-resolution video on any camera without checking its storage.

D:

That proposal is unsafe in its own context (the separate topic of MV smart camera video availability and alert settings), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MV camera retention and storage planning: Promise a full year of continuous high-resolution video on any camera without checking its storage.

Question 616

A Cisco Meraki deployment engineer investigates this operational case: A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Correlate a Meraki Dashboard alert with device event timestamps and a controlled client test before escalating a site outage.
  2. Define SD-WAN performance classes from measured application tolerance and available WAN path behavior before configuring traffic preferences.
  3. Define application performance thresholds from a justified baseline and verify representative alarms.
  4. Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.

Explanation

Correct Answer

D:

The targeted next step is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. The technical reason is: Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific Meraki Insight application health and WAN visibility requirement.

B:

That action is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Meraki Insight application health and WAN visibility requirement.

C:

That action is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.

Question 617

A peer reviewer evaluates the following Meraki case. A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence. The proposed action is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
  2. Combined networks consolidate multiple Meraki product families under one management context; single-product networks have a narrower scope.
  3. Thresholds need context from application behavior and normal variation; a too-sensitive threshold creates unhelpful alerts.
  4. Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality.

Explanation

Correct Answer

D:

Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality. In this situation (A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence.), it justifies the action: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Meraki Insight application health and WAN visibility requirement.

B:

That principle is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Meraki Insight application health and WAN visibility requirement.

C:

That principle is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.

Question 618

A Meraki support engineer must distinguish facts from assumptions. A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare Dashboard online status, management DNS reachability and a same-VLAN client test during the same interval.
  2. Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
  3. Compare baseline application response measurements, configured thresholds and controlled warning events.
  4. Review the Dashboard licensing summary, licensed counts, claimed keys and organizational expiration before committing the expansion.

Explanation

Correct Answer

B:

The discriminating evidence is: Correlate application response time, observed path latency/loss and affected clients over the same incident interval. Expected result: The investigation distinguishes WAN degradation from application-server delays with supporting measurements.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific Meraki Insight application health and WAN visibility requirement.

C:

That evidence is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.

D:

That evidence is relevant to the distinct Meraki subject of Co-termination licensing compliance and common expiration, not the specific Meraki Insight application health and WAN visibility requirement.

Question 619

An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence. The proposed validation is: Correlate application response time, observed path latency/loss and affected clients over the same incident interval. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The intended business application uses the preferred healthy VPN path and falls back only as designed.
  2. Alerts highlight meaningful degradations without flooding operations during ordinary demand changes.
  3. The investigation distinguishes WAN degradation from application-server delays with supporting measurements.
  4. The reconciled inventory covers every intended device once without truncating large networks.

Explanation

Correct Answer

C:

The acceptance criterion is: The investigation distinguishes WAN degradation from application-server delays with supporting measurements. Verify it using: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of Flow preferences and VPN path selection policy, not the specific Meraki Insight application health and WAN visibility requirement.

B:

That outcome is relevant to the distinct Meraki subject of Meraki Insight application threshold and alert tuning, not the specific Meraki Insight application health and WAN visibility requirement. For this scenario, the proper response is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.

D:

That outcome is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific Meraki Insight application health and WAN visibility requirement.

Question 620

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch's CRM loads slowly while other Internet apps run normally, and a network engineer needs response-time evidence. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
  2. Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application.
  3. Review RADIUS logs, EAP rejection codes, client certificate and the assigned VLAN of a known-good peer.
  4. Enable VPN participation for only authorized local subnets and verify advertised remote paths.
  5. Correlate application response time, observed path latency/loss and affected clients over the same incident interval.

Explanation

Correct Answers

B:

The targeted next step is: Select suitable Meraki Insight application and WAN metrics to determine whether delay occurs in the WAN or at the application. The technical reason is: Application assurance data can help compare transport performance and selected app behavior; one green appliance status does not prove good service quality. A successful verification would use: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.

E:

The discriminating evidence is: Correlate application response time, observed path latency/loss and affected clients over the same incident interval.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Meraki Insight application health and WAN visibility requirement.

C:

That evidence is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Meraki Insight application health and WAN visibility requirement.

D:

That action is relevant to the distinct Meraki subject of MX Auto VPN participation for selected VLANs, not the specific Meraki Insight application health and WAN visibility requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests