cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 31

Question 300

A Meraki operations team is preparing an evidence-based incident resolution plan. A small hospital deploys two MX appliances but both share one unprotected upstream switch and one power feed. Which THREE measures together provide the required action, verifying evidence, and acceptable outcome? Select THREE answers.

  1. Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.
  2. Plan managed switch access-port protections against rogue DHCP, spoofing and accidental loops according to platform support.
  3. Compare switch port trunk configuration, permitted VLANs, DHCP requests and correct SVI reachability.
  4. Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
  5. Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior.
  6. Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence.

Explanation

Correct Answers

A:

The discriminating evidence is: Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.

E:

The targeted next step is: Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior. The technical reason is: MX high availability reduces single-appliance failure risk but depends on physical links, consistent config and correct placement. A successful verification would use: Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.

F:

The acceptance criterion is: Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence. Verify it using: Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific MX high availability warm spare and uplink failover requirement.

C:

That evidence is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific MX high availability warm spare and uplink failover requirement.

D:

That evidence is relevant to the distinct Meraki subject of Layer two loop and spanning tree diagnosis, not the specific MX high availability warm spare and uplink failover requirement.

Question 301

A Cisco Meraki deployment engineer investigates this operational case: A logistics site sees a warm spare online in Dashboard yet traffic drops when the active unit's ISP fails. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Check device uplink and cloud reachability separately from local LAN forwarding before declaring a Meraki switch offline to users.
  2. Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior.
  3. Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.
  4. Enable VPN participation for only authorized local subnets and verify advertised remote paths.

Explanation

Correct Answer

B:

The targeted next step is: Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific MX high availability warm spare and uplink failover requirement.

C:

That action is relevant to the distinct Meraki subject of End-to-end QoS trust and voice policy, not the specific MX high availability warm spare and uplink failover requirement.

D:

That action is relevant to the distinct Meraki subject of MX Auto VPN participation for selected VLANs, not the specific MX high availability warm spare and uplink failover requirement.

Question 302

A peer reviewer evaluates the following Meraki case. A logistics site sees a warm spare online in Dashboard yet traffic drops when the active unit's ISP fails. The proposed action is: Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior. Which technical principle BEST supports this decision? Select ONE best answer.

  1. MX high availability reduces single-appliance failure risk but depends on physical links, consistent config and correct placement.
  2. High-density WLAN capacity is constrained by airtime contention, co-channel interference and client capabilities, not only signal strength.
  3. Voice QoS depends on classification and congestion handling along the entire path; markings alone do not create bandwidth.
  4. Endpoint management permissions vary by platform ownership/enrollment method; enrollment must match policy and user consent.

Explanation

Correct Answer

A:

MX high availability reduces single-appliance failure risk but depends on physical links, consistent config and correct placement. In this situation (A logistics site sees a warm spare online in Dashboard yet traffic drops when the active unit's ISP fails.), it justifies the action: Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior.

Incorrect Answers

B:

That principle is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MX high availability warm spare and uplink failover requirement.

C:

That principle is relevant to the distinct Meraki subject of End-to-end QoS trust and voice policy, not the specific MX high availability warm spare and uplink failover requirement.

D:

That principle is relevant to the distinct Meraki subject of Systems Manager managed enrollment versus BYOD privacy, not the specific MX high availability warm spare and uplink failover requirement.

Question 303

A Meraki support engineer must distinguish facts from assumptions. A logistics site sees a warm spare online in Dashboard yet traffic drops when the active unit's ISP fails. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Test a new guest client's portal, name resolution and forbidden internal-subnet connectivity.
  2. Inspect the configured collector, export transport, sampling context and observed flow keys for a controlled session.
  3. Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.
  4. Test a specific client flow against MR SSID policy, VLAN assignment and the MX security rule that applies.

Explanation

Correct Answer

C:

The discriminating evidence is: Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant. Expected result: Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of MR guest SSID splash and isolation settings, not the specific MX high availability warm spare and uplink failover requirement.

B:

That evidence is relevant to the distinct Meraki subject of NetFlow export and traffic visibility limits, not the specific MX high availability warm spare and uplink failover requirement.

D:

That evidence is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific MX high availability warm spare and uplink failover requirement.

Question 304

An implementation lead needs a measurable acceptance criterion for a Meraki change. A logistics site sees a warm spare online in Dashboard yet traffic drops when the active unit's ISP fails. The proposed validation is: Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Employees join the correct protected network while unauthorized endpoints are denied or placed safely.
  2. The intended guest/application restrictions are enforced without breaking unrelated corporate services.
  3. Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence.
  4. The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly.

Explanation

Correct Answer

C:

The acceptance criterion is: Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific MX high availability warm spare and uplink failover requirement.

B:

That outcome is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific MX high availability warm spare and uplink failover requirement. For this scenario, the proper response is: Design a compatible MX warm-spare pair with proper redundant uplinks and test actual failover behavior. Verify it through: Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.

D:

That outcome is relevant to the distinct Meraki subject of Layer two loop and spanning tree diagnosis, not the specific MX high availability warm spare and uplink failover requirement.

Question 305

A Meraki operations reviewer examines this case. A logistics site sees a warm spare online in Dashboard yet traffic drops when the active unit's ISP fails. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Assume enabling guest isolation on one SSID automatically creates an MX deny rule for every wired VLAN.
  2. Place both MX units behind the same unplugged power strip and claim hardware redundancy guarantees site uptime.
  3. Switch off IDS/IPS for the entire company because one upload is flagged by a suspicious signature.
  4. Assume BGP automatically advertises all private networks from any device plugged into the VPN hub.

Explanation

Correct Answer

B:

It conflicts with the relevant behavior: MX high availability reduces single-appliance failure risk but depends on physical links, consistent config and correct placement.

Incorrect Answers

A:

That proposal is unsafe in its own context (the separate topic of Security policy design across MX firewall and MR WLAN), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX high availability warm spare and uplink failover: Place both MX units behind the same unplugged power strip and claim hardware redundancy guarantees site uptime.

C:

That proposal is unsafe in its own context (the separate topic of Security Center threat event investigation and false positive), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX high availability warm spare and uplink failover: Place both MX units behind the same unplugged power strip and claim hardware redundancy guarantees site uptime.

D:

That proposal is unsafe in its own context (the separate topic of BGP route exchange at VPN hub and datacenter), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX high availability warm spare and uplink failover: Place both MX units behind the same unplugged power strip and claim hardware redundancy guarantees site uptime.

Question 306

A Cisco Meraki deployment engineer investigates this operational case: A call center experiences choppy audio when cloud backups run, despite a voice QoS rule on only one switch. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Define the source, destination, application and placement of policy controls before mixing SSID, VLAN and MX L3/L7 rules.
  2. Use the local device status page for uplink and basic device diagnostics when the remote Dashboard is inaccessible, subject to model capabilities.
  3. Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.
  4. Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team.

Explanation

Correct Answer

C:

The targeted next step is: Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue. The technical reason is: Voice QoS depends on classification and congestion handling along the entire path; markings alone do not create bandwidth.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific End-to-end QoS trust and voice policy requirement. For this scenario, the proper response is: Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.

B:

That action is relevant to the distinct Meraki subject of Local status page versus cloud Dashboard troubleshooting, not the specific End-to-end QoS trust and voice policy requirement.

D:

That action is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific End-to-end QoS trust and voice policy requirement.

Question 307

A peer reviewer evaluates the following Meraki case. A call center experiences choppy audio when cloud backups run, despite a voice QoS rule on only one switch. The proposed action is: Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue. Which technical principle BEST supports this decision? Select ONE best answer.

  1. 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.
  2. Packet delivery depends on eligible routes and permitted return paths; a working local ping is not proof of remote reachability.
  3. Voice QoS depends on classification and congestion handling along the entire path; markings alone do not create bandwidth.
  4. A working overlay tunnel still needs compatible cloud-side routing for replies; asymmetric routing can break stateful services.

Explanation

Correct Answer

C:

Voice QoS depends on classification and congestion handling along the entire path; markings alone do not create bandwidth. In this situation (A call center experiences choppy audio when cloud backups run, despite a voice QoS rule on only one switch.), it justifies the action: Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific End-to-end QoS trust and voice policy requirement.

B:

That principle is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific End-to-end QoS trust and voice policy requirement.

D:

That principle is relevant to the distinct Meraki subject of vMX traffic symmetry and cloud return routing, not the specific End-to-end QoS trust and voice policy requirement.

Question 308

A Meraki support engineer must distinguish facts from assumptions. A call center experiences choppy audio when cloud backups run, despite a voice QoS rule on only one switch. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Review VPN status, peer paths, remote route presence and a matching inter-site traffic test.
  2. Review the Dashboard licensing summary, licensed counts, claimed keys and organizational expiration before committing the expansion.
  3. Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test.
  4. Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.

Explanation

Correct Answer

C:

The discriminating evidence is: Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test. Expected result: Real-time audio meets target quality while bulk file transfers are correctly deprioritized when links saturate.

Incorrect Answers

A:

That evidence is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific End-to-end QoS trust and voice policy requirement.

B:

That evidence is relevant to the distinct Meraki subject of Co-termination licensing compliance and common expiration, not the specific End-to-end QoS trust and voice policy requirement.

D:

That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific End-to-end QoS trust and voice policy requirement.

Question 309

An implementation lead needs a measurable acceptance criterion for a Meraki change. A call center experiences choppy audio when cloud backups run, despite a voice QoS rule on only one switch. The proposed validation is: Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. Real-time audio meets target quality while bulk file transfers are correctly deprioritized when links saturate.
  2. Legitimate clients receive approved addresses while untrusted DHCP offers are constrained.
  3. New access ports match the approved role while exceptional trunk and security settings remain correct.
  4. Mark every packet as highest priority and expect the network to eliminate congestion.

Explanation

Correct Answer

A:

The acceptance criterion is: Real-time audio meets target quality while bulk file transfers are correctly deprioritized when links saturate. Verify it using: Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific End-to-end QoS trust and voice policy requirement.

C:

That outcome is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific End-to-end QoS trust and voice policy requirement.

D:

It does not establish the needed behavior: Voice QoS depends on classification and congestion handling along the entire path; markings alone do not create bandwidth.

Question 310

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A call center experiences choppy audio when cloud backups run, despite a voice QoS rule on only one switch. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
  2. Check the organization's licensing mode and the applicable Cisco Meraki model-specific guidance before interpreting a warning.
  3. Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
  4. Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test.
  5. Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue.

Explanation

Correct Answers

D:

The discriminating evidence is: Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test.

E:

The targeted next step is: Design voice prioritization consistently on access ports, switches and WAN shaping instead of setting one isolated queue. The technical reason is: Voice QoS depends on classification and congestion handling along the entire path; markings alone do not create bandwidth. A successful verification would use: Verify device/port classification, queue utilization, DSCP treatment and call quality during a congested test.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific End-to-end QoS trust and voice policy requirement.

B:

That evidence is relevant to the distinct Meraki subject of Meraki subscription licensing versus historical per-device licensing, not the specific End-to-end QoS trust and voice policy requirement.

C:

That evidence is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific End-to-end QoS trust and voice policy requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests