Cisco 500-220 Practice Test 29
Question 280
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An MX must reach a downstream printer network behind an L3 switch but the static next hop is configured in the wrong VLAN. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.
- Choose hubs for branches that must reach shared datacenter subnets and verify every spoke has the intended hub association.
- Plan managed switch access-port protections against rogue DHCP, spoofing and accidental loops according to platform support.
- Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
- Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing.
Explanation
Correct Answers
D:The discriminating evidence is: Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
E:The targeted next step is: Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing. The technical reason is: A static route pointing to an unreachable next hop cannot repair a missing layer-2 or layer-3 path; prefix selection determines eligible matches. A successful verification would use: Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific Static route next hop and VPN route preference requirement.
B:That action is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific Static route next hop and VPN route preference requirement.
C:That action is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Static route next hop and VPN route preference requirement.
Question 281
A Cisco Meraki deployment engineer investigates this operational case: A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Plan supported MS stack firmware maintenance with awareness of control-plane and access-port disruption.
- Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.
- Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing.
- Evaluate supported BGP topology and path filters when a concentrator must exchange VPN routes with upstream routing.
Explanation
Correct Answer
C:The targeted next step is: Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific Static route next hop and VPN route preference requirement.
B:That action is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific Static route next hop and VPN route preference requirement.
D:That action is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Static route next hop and VPN route preference requirement.
Question 282
A peer reviewer evaluates the following Meraki case. A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link. The proposed action is: Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing. Which technical principle BEST supports this decision? Select ONE best answer.
- A static route pointing to an unreachable next hop cannot repair a missing layer-2 or layer-3 path; prefix selection determines eligible matches.
- Packet delivery depends on eligible routes and permitted return paths; a working local ping is not proof of remote reachability.
- Camera recording and alerts are separate functions; a notification can fail despite accessible captured video or healthy camera connectivity.
- VLANs separate layer-2 broadcast domains, while access between them requires a suitable routed and policy-controlled boundary.
Explanation
Correct Answer
A:A static route pointing to an unreachable next hop cannot repair a missing layer-2 or layer-3 path; prefix selection determines eligible matches. In this situation (A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link.), it justifies the action: Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific Static route next hop and VPN route preference requirement.
C:That principle is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Static route next hop and VPN route preference requirement.
D:That principle is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Static route next hop and VPN route preference requirement.
Question 283
A Meraki support engineer must distinguish facts from assumptions. A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
- Compare SM managed-device status, MR/MX integration, issued credentials and an actual client connection.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Compare the network type and inventory with the configuration tabs requested by operations.
Explanation
Correct Answer
A:Applied to the described situation (A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link.), it should establish: The intended private subnet is forwarded through a reachable next hop without stealing unrelated routes.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Static route next hop and VPN route preference requirement.
C:That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Static route next hop and VPN route preference requirement. For this scenario, the proper response is: Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing. Verify it through: Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
D:That evidence is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Static route next hop and VPN route preference requirement.
Question 284
An implementation lead needs a measurable acceptance criterion for a Meraki change. A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link. The proposed validation is: Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Approved clients authenticate to their policy VLAN; unknown devices follow documented restriction or fallback.
- The necessary prefix is routed in both directions and a controlled application connection works.
- Guest endpoints stay isolated while authorized staff reach only specified internal resources.
- The intended private subnet is forwarded through a reachable next hop without stealing unrelated routes.
Explanation
Correct Answer
D:The acceptance criterion is: The intended private subnet is forwarded through a reachable next hop without stealing unrelated routes. Verify it using: Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP. The associated corrective action is: Verify static-route next hops and subnet specificity before selecting them as a substitute for dynamic routing.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of MS 802.1X access control and RADIUS, not the specific Static route next hop and VPN route preference requirement.
B:That outcome is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific Static route next hop and VPN route preference requirement.
C:That outcome is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Static route next hop and VPN route preference requirement.
Question 285
A Meraki operations reviewer examines this case. A team uses overlapping aggregate and specific routes and cannot explain why one /24 takes a different link. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Add a broad default route toward an inactive interface to fix one missing warehouse subnet.
- Assume the local status page grants unrestricted policy editing identical to every Dashboard control.
- Assume BGP automatically advertises all private networks from any device plugged into the VPN hub.
- Specify an MV camera as a substitute for a WAN firewall because both can be viewed in Dashboard.
Explanation
Correct Answer
A:It conflicts with the relevant behavior: A static route pointing to an unreachable next hop cannot repair a missing layer-2 or layer-3 path; prefix selection determines eligible matches.
Incorrect Answers
B:That proposal is unsafe in its own context (the separate topic of Local status page versus cloud Dashboard troubleshooting), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Static route next hop and VPN route preference: Add a broad default route toward an inactive interface to fix one missing warehouse subnet.
C:That proposal is unsafe in its own context (the separate topic of BGP route exchange at VPN hub and datacenter), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Static route next hop and VPN route preference: Add a broad default route toward an inactive interface to fix one missing warehouse subnet.
D:That proposal is unsafe in its own context (the separate topic of Product family capabilities and integrated Dashboard view), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Static route next hop and VPN route preference: Add a broad default route toward an inactive interface to fix one missing warehouse subnet.
Question 286
A Cisco Meraki deployment engineer investigates this operational case: A school needs guest Wi-Fi isolated from payroll but accessible to Internet DNS and web services. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Audit claimed hardware and license entitlement when an RMA device is swapped instead of creating a duplicate charge by assumption.
- Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules.
- Evaluate supported BGP topology and path filters when a concentrator must exchange VPN routes with upstream routing.
- Confirm whether a Dashboard network combines MX, MS and MR products before expecting all product tabs in a single network.
Explanation
Correct Answer
B:The targeted next step is: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules. The technical reason is: VLANs separate layer-2 broadcast domains, while access between them requires a suitable routed and policy-controlled boundary.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific Network segmentation with VLANs and routed boundaries requirement.
C:That action is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Network segmentation with VLANs and routed boundaries requirement.
D:That action is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Network segmentation with VLANs and routed boundaries requirement.
Question 287
A peer reviewer evaluates the following Meraki case. A school needs guest Wi-Fi isolated from payroll but accessible to Internet DNS and web services. The proposed action is: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules. Which technical principle BEST supports this decision? Select ONE best answer.
- A wireless client can associate at the radio level yet fail access because RADIUS, certificate or VLAN policy rejects it.
- Firmware changes can affect device behavior and wireless client interoperability; a staged test limits correlated outage exposure.
- VLANs separate layer-2 broadcast domains, while access between them requires a suitable routed and policy-controlled boundary.
- BGP route propagation requires a supported device and configuration and explicit policies; a working VPN tunnel alone does not prove BGP exchange.
Explanation
Correct Answer
C:VLANs separate layer-2 broadcast domains, while access between them requires a suitable routed and policy-controlled boundary. In this situation (A school needs guest Wi-Fi isolated from payroll but accessible to Internet DNS and web services.), it justifies the action: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Network segmentation with VLANs and routed boundaries requirement.
B:That principle is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific Network segmentation with VLANs and routed boundaries requirement.
D:That principle is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Network segmentation with VLANs and routed boundaries requirement. For this scenario, the proper response is: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules.
Question 288
A Meraki support engineer must distinguish facts from assumptions. A school needs guest Wi-Fi isolated from payroll but accessible to Internet DNS and web services. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
- Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Compare destination prefix, next-hop connectivity, route table and return path for a chosen test IP.
Explanation
Correct Answer
C:The discriminating evidence is: Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow. Expected result: Guest endpoints stay isolated while authorized staff reach only specified internal resources.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Layer two loop and spanning tree diagnosis, not the specific Network segmentation with VLANs and routed boundaries requirement.
B:That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Network segmentation with VLANs and routed boundaries requirement.
D:That evidence is relevant to the distinct Meraki subject of Static route next hop and VPN route preference, not the specific Network segmentation with VLANs and routed boundaries requirement.
Question 289
An implementation lead needs a measurable acceptance criterion for a Meraki change. A school needs guest Wi-Fi isolated from payroll but accessible to Internet DNS and web services. The proposed validation is: Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Branch and datacenter routers exchange only expected internal routes with controlled convergence.
- The requested changes reach exactly intended networks and can be reversed using recorded configuration.
- Critical sites recover expected WAN and VPN services within the approved maintenance plan.
- Guest endpoints stay isolated while authorized staff reach only specified internal resources.
Explanation
Correct Answer
D:The acceptance criterion is: Guest endpoints stay isolated while authorized staff reach only specified internal resources. Verify it using: Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow. The associated corrective action is: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Network segmentation with VLANs and routed boundaries requirement. For this scenario, the proper response is: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules.
B:That outcome is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Network segmentation with VLANs and routed boundaries requirement.
C:That outcome is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Network segmentation with VLANs and routed boundaries requirement.
Question 290
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A school needs guest Wi-Fi isolated from payroll but accessible to Internet DNS and web services. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules.
- Review camera online status, playback retention, motion-event rule and destination notification settings.
- Design the vMX as the intended cloud VPN concentrator and include the cloud provider's required route and security constructs.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Plan managed switch access-port protections against rogue DHCP, spoofing and accidental loops according to platform support.
Explanation
Correct Answers
A:The targeted next step is: Design separate guest, employee and IoT VLANs with deliberate inter-VLAN routing and firewall rules. The technical reason is: VLANs separate layer-2 broadcast domains, while access between them requires a suitable routed and policy-controlled boundary. A successful verification would use: Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
D:The discriminating evidence is: Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Network segmentation with VLANs and routed boundaries requirement.
C:That action is relevant to the distinct Meraki subject of vMX private cloud connectivity and deployment mode, not the specific Network segmentation with VLANs and routed boundaries requirement.
E:That action is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific Network segmentation with VLANs and routed boundaries requirement.