Cisco 300-420 Practice Test 20
Question 190
An enterprise needs a temporary IPv6 overlay through an existing IPv4-only WAN before native service is available. The observed fault is: Ignoring tunnel overhead or IPv4 endpoint reachability can cause PMTUD issues and unavailable IPv6 paths. How should the issue be corrected and verified?
- The controlled recovery is to ignore carrier MTU and security policies for all encapsulated traffic.
- The controlled recovery is to assume IPv6 packets cross an IPv4-only core natively without encapsulation or translation.
- The controlled recovery is to fix endpoint routing and MTU requirements then validate the overlay under representative traffic.
- The controlled recovery is to use an arbitrary DNS alias as a replacement for tunnel endpoints.
Explanation
Correct Answer
C:An IPv6 overlay encapsulates IPv6 packets across an IPv4 transport but adds header and operational complexity. This corrects the described failure and provides a verifiable outcome.
Incorrect Answers
A:Ignore carrier MTU and security policies for all encapsulated traffic. Ignoring tunnel overhead or IPv4 endpoint reachability can cause PMTUD issues and unavailable IPv6 paths. Use the controlled remediation: fix endpoint routing and MTU requirements then validate the overlay under representative traffic.
B:Assume IPv6 packets cross an IPv4-only core natively without encapsulation or translation. Ignoring tunnel overhead or IPv4 endpoint reachability can cause PMTUD issues and unavailable IPv6 paths. Use the controlled remediation: fix endpoint routing and MTU requirements then validate the overlay under representative traffic.
D:Use an arbitrary DNS alias as a replacement for tunnel endpoints. Ignoring tunnel overhead or IPv4 endpoint reachability can cause PMTUD issues and unavailable IPv6 paths. Use the controlled remediation: fix endpoint routing and MTU requirements then validate the overlay under representative traffic.
Question 191
IPv6-only clients must reach a legacy public web service that has only an IPv4 address. Which operator action most directly resolves this condition?
- Provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit.
- Assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack.
- Use only an IPv6 default route as a substitute for NAT64 service translation.
- Publish an IPv4-only A record and assume every IPv6-only application can use it without translation.
Explanation
Correct Answer
A:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. This is the specific corrective action for NAT64 DNS64 IPv6-only client to IPv4 service.
Incorrect Answers
B:Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. This change targets the wrong mechanism for NAT64 DNS64 IPv6-only client to IPv4 service.
C:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Instead inspect IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
D:Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Publish an IPv4-only A record and assume every IPv6-only application can use it without translation.
Question 192
IPv6-only clients must reach a legacy public web service that has only an IPv4 address. Which collection of observations most directly tests the suspected cause?
- A feature-license screenshot without the required design or acceptance tests.
- IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
- A marketing claim without measured routing, capacity or failure-domain evidence.
- A hostname inventory without effective configuration or operational measurements.
Explanation
Correct Answer
B:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. This evidence observes the actual nAT64 DNS64 IPv6-only client to IPv4 service mechanism and its result.
Incorrect Answers
A:A feature-license screenshot without the required design or acceptance tests. This observation alone cannot establish nAT64 DNS64 IPv6-only client to IPv4 service. The decisive evidence instead includes IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination. NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
C:A marketing claim without measured routing, capacity or failure-domain evidence. This observation alone cannot establish nAT64 DNS64 IPv6-only client to IPv4 service. The decisive evidence instead includes IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination. NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
D:A hostname inventory without effective configuration or operational measurements. This observation alone cannot establish nAT64 DNS64 IPv6-only client to IPv4 service. The decisive evidence instead includes IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination. NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
Question 193
IPv6-only clients must reach a legacy public web service that has only an IPv4 address. Which system behavior underlies the appropriate response?
- Any single device automatically guarantees high availability for every site.
- NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
- Encryption and segmentation are identical mechanisms and can replace each other.
- Cloud connectivity automatically removes any requirement for routing or policy.
Explanation
Correct Answer
B:This is why the appropriate action is provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit. Confirm it with IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Incorrect Answers
A:Any single device automatically guarantees high availability for every site. This is an incorrect generalization for nAT64 DNS64 IPv6-only client to IPv4 service. The relevant rule is nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Verify using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
C:Encryption and segmentation are identical mechanisms and can replace each other. This is an incorrect generalization for nAT64 DNS64 IPv6-only client to IPv4 service. The relevant rule is nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Verify using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
D:Cloud connectivity automatically removes any requirement for routing or policy. This is an incorrect generalization for nAT64 DNS64 IPv6-only client to IPv4 service. The relevant rule is nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Verify using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Question 194
IPv6-only clients must reach a legacy public web service that has only an IPv4 address. Suppose the operator instead makes this incorrect change: Assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack. Which failure or risk follows from this shortcut?
- The only issue is an inaccurate hostname while traffic paths are unaffected.
- A healthy unrelated system proves the intended failure domain is protected.
- Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services.
- The failure is entirely cosmetic because all control-plane changes are harmless.
Explanation
Correct Answer
C:This explains why the proposed shortcut does not solve nAT64 DNS64 IPv6-only client to IPv4 service. NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
Incorrect Answers
A:The only issue is an inaccurate hostname while traffic paths are unaffected. The actual failure is expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Check IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
B:A healthy unrelated system proves the intended failure domain is protected. The actual failure is expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Check IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
D:The failure is entirely cosmetic because all control-plane changes are harmless. The actual failure is expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Check IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Question 195
IPv6-only clients must reach a legacy public web service that has only an IPv4 address. The observed fault is: Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. What action most directly restores and validates the intended state?
- Use only an IPv6 default route as a substitute for NAT64 service translation.
- Publish an IPv4-only A record and assume every IPv6-only application can use it without translation.
- Validate synthesis and translation path with compatible applications and add alternative methods where needed.
- Assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack.
Explanation
Correct Answer
C:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. This corrects the described failure and provides a verifiable outcome.
Incorrect Answers
A:Use only an IPv6 default route as a substitute for NAT64 service translation. Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Use the controlled remediation: validate synthesis and translation path with compatible applications and add alternative methods where needed.
B:Publish an IPv4-only A record and assume every IPv6-only application can use it without translation. Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Use the controlled remediation: validate synthesis and translation path with compatible applications and add alternative methods where needed.
D:Assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack. Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Use the controlled remediation: validate synthesis and translation path with compatible applications and add alternative methods where needed.
Question 196
A greenfield IPv6-only user network must keep approved access to selected IPv4-only partner applications. Which enterprise design procedure best meets this requirement?
- For this enterprise design, the architect should provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit.
- For this enterprise design, the architect should use only an IPv6 default route as a substitute for NAT64 service translation.
- For this enterprise design, the architect should publish an IPv4-only A record and assume every IPv6-only application can use it without translation.
- For this enterprise design, the architect should assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack.
Explanation
Correct Answer
A:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Confirm the result using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Incorrect Answers
B:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Use only an IPv6 default route as a substitute for NAT64 service translation.
C:Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services.
D:Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. The relevant action is provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit.
Question 197
A greenfield IPv6-only user network must keep approved access to selected IPv4-only partner applications. Which evidence best distinguishes the intended state from a superficial indicator?
- Inspect the following evidence: an old network diagram with no current route, policy, or redundancy state.
- Inspect the following evidence: a feature-license screenshot without the required design or acceptance tests.
- Inspect the following evidence: IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
- Inspect the following evidence: a marketing claim without measured routing, capacity or failure-domain evidence.
Explanation
Correct Answer
C:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. The intended procedure is provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit.
Incorrect Answers
A:That option would inspect the following evidence: an old network diagram with no current route, policy, or redundancy state, but it addresses a different concern. This evidence observes the actual nAT64 DNS64 IPv6-only client to IPv4 service mechanism and its result.
B:A feature-license screenshot without the required design or acceptance tests. This observation alone cannot establish nAT64 DNS64 IPv6-only client to IPv4 service. The decisive evidence instead includes IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination. NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
D:A marketing claim without measured routing, capacity or failure-domain evidence. This observation alone cannot establish nAT64 DNS64 IPv6-only client to IPv4 service. The decisive evidence instead includes IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination. NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
Question 198
A greenfield IPv6-only user network must keep approved access to selected IPv4-only partner applications. Which underlying principle explains the correct decision?
- The relevant principle is that cloud connectivity automatically removes any requirement for routing or policy.
- The relevant principle is that any single device automatically guarantees high availability for every site.
- The relevant principle is that nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records.
- The relevant principle is that a longer IP prefix is always less specific than the default route.
Explanation
Correct Answer
C:This is why the appropriate action is provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit.
Incorrect Answers
A:Cloud connectivity automatically removes any requirement for routing or policy. This is an incorrect generalization for nAT64 DNS64 IPv6-only client to IPv4 service. The relevant rule is nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Verify using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
B:Any single device automatically guarantees high availability for every site. This is an incorrect generalization for nAT64 DNS64 IPv6-only client to IPv4 service. The relevant rule is nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Verify using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
D:A longer IP prefix is always less specific than the default route. This is an incorrect generalization for nAT64 DNS64 IPv6-only client to IPv4 service. The relevant rule is nAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Verify using IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Question 199
A greenfield IPv6-only user network must keep approved access to selected IPv4-only partner applications. Suppose the operator instead makes this incorrect change: Assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack. What is the most material consequence of that mistake?
- The resulting technical fault is that the failure is entirely cosmetic because all control-plane changes are harmless.
- The resulting technical fault is that collecting telemetry originally caused the missing route or service outage.
- The resulting technical fault is that expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services.
- The resulting technical fault is that a healthy unrelated system proves the intended failure domain is protected.
Explanation
Correct Answer
C:This explains why the proposed shortcut does not solve nAT64 DNS64 IPv6-only client to IPv4 service. The right response is provide supported NAT64 translation and DNS64 synthesis where application resolution requirements permit.
Incorrect Answers
A:The failure is entirely cosmetic because all control-plane changes are harmless. The actual failure is expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Check IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
B:Collecting telemetry originally caused the missing route or service outage. The actual failure is expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Check IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
D:A healthy unrelated system proves the intended failure domain is protected. The actual failure is expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Check IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Question 200
A greenfield IPv6-only user network must keep approved access to selected IPv4-only partner applications. The observed fault is: Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Which controlled remediation should be used?
- The controlled recovery is to validate synthesis and translation path with compatible applications and add alternative methods where needed.
- The controlled recovery is to publish an IPv4-only A record and assume every IPv6-only application can use it without translation.
- The controlled recovery is to assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack.
- The controlled recovery is to use only an IPv6 default route as a substitute for NAT64 service translation.
Explanation
Correct Answer
A:NAT64 can translate IPv6 client flows to IPv4 servers while DNS64 may synthesize IPv6 records from A records. Relevant evidence includes IPv6 client DNS AAAA synthesis, NAT64 mapping, translated session logs and reachable IPv4 destination.
Incorrect Answers
B:Publish an IPv4-only A record and assume every IPv6-only application can use it without translation. Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Use the controlled remediation: validate synthesis and translation path with compatible applications and add alternative methods where needed.
C:Assume an IPv6-only host inherently initiates native IPv4 sockets without an IPv4 stack. Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Use the controlled remediation: validate synthesis and translation path with compatible applications and add alternative methods where needed.
D:Use only an IPv6 default route as a substitute for NAT64 service translation. Expecting pure dual-stack without IPv4 hosts or translation can leave IPv6-only clients unable to use IPv4-only services. Use the controlled remediation: validate synthesis and translation path with compatible applications and add alternative methods where needed.