cert
cert-1
cert-2

Pass Cisco 300-415 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
300-415 Exam - Verified By Experts
300-415 Premium Bundle
$29.98

300-415 Premium Bundle

$79.99
$109.97
  • Premium File 480 Questions & Answers. Last update: Nov 13, 2026
  • Training Course 112 Video Lectures
  • Study Guide 874 Pages
 
$109.97
$79.99
accept 28 downloads in last 7 days
block-screenshots
Purchase Cisco 300-415 Exam Training Products Individually
Cisco 300-415 Premium File
Premium File 480 Q&A
$76.99$69.99
Cisco 300-415 Video Training Course
Training Course 112 Lectures
$21.99 $19.99
Cisco 300-415 PDF Study Guide
Study Guide 874 Pages
$21.99 $19.99
Cisco 300-415 Practice Test 85

Question 840

[Controller deployment acceptance] The engineer detects the following failed approach: Installing a generic VM without the platform-specific networking or certificate plan does not create a functional fabric controller. The original need remains: A platform team is validating control component readiness during staged site onboarding. A regulated enterprise must host its SD-WAN control components on infrastructure it manages within its own data centers. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?

  1. Instead implement this other change: Plan supported Controller and Manager scaling, affinity, and capacity based on the actual software version and deployment guidance. Its usual validation would be: Review documented scale thresholds, control session load and failover performance at representative projected device counts.
  2. Instead implement this other change: Verify the organization-name identity consistently across controllers and WAN Edges together with certificates and control configuration. Its usual validation would be: Compare organization names in controller and edge configurations and confirm authenticated peering after correction.
  3. Instead implement this other change: Evaluate a supported Cisco-hosted controller deployment and its reachability, identity, region, and service prerequisites. Its usual validation would be: Verify hosted controller inventory, allowed reachability, registered devices, secure control peers, and expected management access.
  4. Correct the design by doing the following: Deploy supported on-premises controller virtual appliances with validated resources, network settings, trust, and software compatibility. Then confirm success with this specific check: Verify controller boot, network interfaces, software version alignment, certificates, and WAN Edge reachability in a staging environment.

Explanation

Correct Answer

D:

It restores the intended mechanism because Self-hosted control platforms need supported hypervisor/resources and reachable management and control networks; placement alone is not a complete deployment.

Incorrect Answers

A:

The alternative change addresses controller capacity and scale planning where the separate requirement is A multi-region enterprise doubles its WAN Edge count and new control sessions exceed the validated operational envelope. It does not directly repair the present failure (Installing a generic VM without the platform-specific networking or certificate plan does not create a functional fabric controller.); the needed correction is Deploy supported on-premises controller virtual appliances with validated resources, network settings, trust, and software compatibility.

B:

The alternative change addresses controller organization-name consistency where the separate requirement is A newly deployed controller repeatedly fails to form expected peer control connections although network transport is reachable. It does not directly repair the present failure (Installing a generic VM without the platform-specific networking or certificate plan does not create a functional fabric controller.); the needed correction is Deploy supported on-premises controller virtual appliances with validated resources, network settings, trust, and software compatibility.

C:

The alternative change addresses controller cloud-hosted deployment decision where the separate requirement is A company does not want to operate controller virtual machines but needs reachable SD-WAN control and management services across its branches. It does not directly repair the present failure (Installing a generic VM without the platform-specific networking or certificate plan does not create a functional fabric controller.); the needed correction is Deploy supported on-premises controller virtual appliances with validated resources, network settings, trust, and software compatibility.

Question 841

[Controller connectivity incident] The engineer detects the following failed approach: Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive. The original need remains: An on-call engineer must restore the exact controller or fabric identity behavior without changing unrelated service routes. A branch behind a carrier NAT reaches the internet but never discovers its fabric controllers during first activation. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?

  1. Correct the design by doing the following: Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage. Then confirm success with this specific check: Confirm DNS lookup of the configured Validator, permitted ports, and successful initial control exchange with the authorized Validator.
  2. Instead implement this other change: Design multiple appropriately placed Cisco SD-WAN Controllers with reachability, consistent policy, and tested failover. Its usual validation would be: Stop one controller in a controlled test and confirm surviving control peers and continued advertised OMP reachability.
  3. Instead implement this other change: Check device and controller certificates, trusted roots, organization matching, validity period, and authorization before retrying connections. Its usual validation would be: Inspect certificate status and controller rejection logs, correct the trust mismatch and confirm authenticated control connections.
  4. Instead implement this other change: Distribute redundant controller resources across independent failure domains and validate separate transport paths. Its usual validation would be: Shut down a simulated host or uplink and confirm a separately hosted controller retains authenticated control peers.

Explanation

Correct Answer

A:

It restores the intended mechanism because The Validator brokers discovery and helps with NAT-related control orchestration; generic internet reachability is insufficient. This directly repairs the described failure: Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive.

Incorrect Answers

B:

The alternative change addresses high availability for control components where the separate requirement is The enterprise has one SD-WAN Controller and wants service continuity through a single planned controller-host maintenance event. It does not directly repair the present failure (Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive.); the needed correction is Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage.

C:

The alternative change addresses certificate validity and chain of trust where the separate requirement is New branch routers can reach the Validator but controller authentication fails after an internal PKI rollover.

D:

The alternative change addresses disaster-recovery control-site isolation where the separate requirement is Two control VMs share the same hypervisor and uplink while the stated requirement is resilience to host and connectivity failure. It does not directly repair the present failure (Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive.); the needed correction is Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage.

Question 842

[Security and QoS acceptance test] A network-security engineering team is evaluating enforcement before changing production service flows. Interactive voice frames compete with bulk backups on a constrained WAN circuit and need controlled service under congestion. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?

  1. Treating simple IPsec transport encryption as equivalent to local intrusion prevention leaves exploit inspection absent.
  2. Marking packets without an egress queue policy may not protect the voice class when the link saturates.
  3. Assuming FEC eliminates congestion capacity limits can worsen a saturated circuit with additional parity traffic.
  4. Enabling unrestricted direct internet NAT for all traffic can bypass the mandated cloud security gateway.

Explanation

Correct Answer

B:

This mistake undermines the intended qos scheduling for real-time traffic requirement. Marking packets without an egress queue policy may not protect the voice class when the link saturates.

Incorrect Answers

A:

That failure mode is primarily about intrusion prevention inspection at branches instead of this required qos scheduling for real-time traffic treatment.

C:

That failure mode is primarily about forward error correction for lossy links instead of this required qos scheduling for real-time traffic treatment.

D:

That failure mode is primarily about secure internet gateway breakout instead of this required qos scheduling for real-time traffic treatment.

Question 843

[Policy-change production incident] The engineering recommendation is: Use supported service insertion with appropriate service advertisement, policy steering and symmetric forwarding validation. The situation is: A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. Selected finance traffic must be inspected by an approved firewall service at a regional hub before reaching its destination. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?

  1. Segmentation must remain default-deny outside approved shared services; route leaking should be constrained to required targets.
  2. Central or regional breakout requires planned forwarding and egress controls, differing from direct local DIA at every branch.
  3. Service insertion combines advertised service availability with policy-based packet handling; merely deploying a firewall VM is insufficient.
  4. DIA allows specified service traffic to egress directly to the internet while enterprise private routes retain controlled overlay reachability.

Explanation

Correct Answer

C:

The practical discriminator is the validation step: Check service routes and policy matches, then confirm both directions traverse the designated firewall without asymmetric bypass. Service insertion combines advertised service availability with policy-based packet handling; merely deploying a firewall VM is insufficient.

Incorrect Answers

A:

This is a rationale for segmentation route leaking guardrails, under the different situation Two isolated service VPNs require access to one narrowly approved shared application, not blanket reachability to each other. It does not justify the specific proposed mechanism for service insertion path selection.

B:

This is a rationale for regional internet breakout, under the different situation Branches in one jurisdiction must use an approved regional egress gateway for selected internet applications. Service insertion combines advertised service availability with policy-based packet handling; merely deploying a firewall VM is insufficient.

D:

This is a rationale for direct internet access policy and nat, under the different situation Guest browsing must exit at the branch internet circuit rather than hairpin through the corporate data center. It does not justify the specific proposed mechanism for service insertion path selection.

Question 844

[New branch commissioning] The proposed action is: Inspect OMP attributes and route selection together with each next-hop TLOC/BFD state before changing local LAN metrics. The requirement is: A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. A WAN Edge learns two overlay paths for a remote service prefix but forwards unexpectedly after a transport outage. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?

  1. Inspect BGP neighbor state and selected prefixes, OMP advertised routes and remote received routes for only intended subnets.
  2. Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
  3. Check the inter-router extension link, local TLOC details, transport IP reachability and BFD tunnels over the extended path.
  4. Compare OMP route details, accepted route preference, resolved TLOC and observed forwarding after simulated failure.

Explanation

Correct Answer

D:

OMP route attributes and TLOC availability affect usable overlay forwarding; the best path cannot be inferred from one route field alone. Compare OMP route details, accepted route preference, resolved TLOC and observed forwarding after simulated failure.

Incorrect Answers

A:

Those observations would be useful for bgp service-side routing and redistribution, where the separate issue is: A data center edge learns enterprise prefixes from a customer BGP neighbor and must publish only authorized destinations into the fabric. They do not directly establish the present omp route preference and resolution result.

B:

Those observations would be useful for transport vpn 0 default-route correctness, where the separate issue is: An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. They do not directly establish the present omp route preference and resolution result.

C:

Those observations would be useful for tloc extension across dual branch routers, where the separate issue is: One WAN Edge needs to use a transport circuit physically attached to the adjacent WAN Edge at the same branch. They do not directly establish the present omp route preference and resolution result.

Question 845

[Application degradation investigation] The engineer detects the following failed approach: Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover. The original need remains: An operations team is analyzing security or QoS outcomes using a representative impaired application flow. A dual-transport branch needs QoS treatment that accounts for separate overlay tunnels and variable available link capacity. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?

  1. Correct the design by doing the following: Evaluate supported per-tunnel or adaptive QoS configuration and confirm treatment on each eligible WAN Edge path. Then confirm success with this specific check: Inspect per-tunnel QoS statistics and performance under changed transport conditions, including path failover.
  2. Instead implement this other change: Evaluate supported packet duplication for the selected class when bandwidth cost and receiving behavior are acceptable. Its usual validation would be: Observe duplicate traffic across eligible transports and application packet delivery during selective path impairment.
  3. Instead implement this other change: Use supported traffic shaping to buffer and pace eligible excess traffic to the intended egress rate while monitoring queue delay. Its usual validation would be: Generate representative bursts and observe shaped output rate, queue depth and application latency.
  4. Instead implement this other change: Classify intended applications and apply consistent DSCP marking with matching WAN Edge egress class-map/queue treatment. Its usual validation would be: Inspect output DSCP bits, matched QoS counters and measured quality under controlled cross traffic.

Explanation

Correct Answer

A:

It restores the intended mechanism because Different tunnels may have different capacity and congestion behavior; tunnel-aware QoS must map classes and capacity according to supported capabilities.

Incorrect Answers

B:

The alternative change addresses packet duplication for high-value traffic where the separate requirement is A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. It does not directly repair the present failure (Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover.); the needed correction is Evaluate supported per-tunnel or adaptive QoS configuration and confirm treatment on each eligible WAN Edge path.

C:

The alternative change addresses traffic shaping versus policing where the separate requirement is A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. It does not directly repair the present failure (Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover.); the needed correction is Evaluate supported per-tunnel or adaptive QoS configuration and confirm treatment on each eligible WAN Edge path.

D:

The alternative change addresses dscp marking and class mapping where the separate requirement is Branch traffic leaves the LAN with inconsistent priority markings and the transport class policy cannot identify voice reliably. It does not directly repair the present failure (Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover.); the needed correction is Evaluate supported per-tunnel or adaptive QoS configuration and confirm treatment on each eligible WAN Edge path.

Question 846

[Policy-change production incident] The engineering recommendation is: Create SLA classes and application-aware routing policies using supported tunnel performance measurements and allowed fallback paths. The situation is: A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. Voice users need path selection based on measured latency, jitter and packet loss, not just the cheapest WAN color. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?

  1. Color-based path constraints translate transport intent into overlay forwarding rules when associated TLOCs are active.
  2. AAR uses data-tunnel BFD performance observations and defined SLA thresholds to steer matched applications to acceptable paths.
  3. Service VPNs isolate routing tables and overlay segmentation; shared VPN 0 transport does not imply shared application routing.
  4. Service insertion combines advertised service availability with policy-based packet handling; merely deploying a firewall VM is insufficient.

Explanation

Correct Answer

B:

The practical discriminator is the validation step: Degrade the selected link under test and correlate BFD metrics, matched application classification and chosen alternate path. That rationale matches the chosen action: Create SLA classes and application-aware routing policies using supported tunnel performance measurements and allowed fallback paths.

Incorrect Answers

A:

This is a rationale for transport color eligibility for application policies, under the different situation The design prefers private MPLS for ERP while allowing public internet only if the private tunnel becomes unusable. AAR uses data-tunnel BFD performance observations and defined SLA thresholds to steer matched applications to acceptable paths.

C:

This is a rationale for service-vpn segmentation boundaries, under the different situation Guest user traffic must never reach payment subnet routes, even though both groups share the same physical internet underlay. AAR uses data-tunnel BFD performance observations and defined SLA thresholds to steer matched applications to acceptable paths.

D:

This is a rationale for service insertion path selection, under the different situation Selected finance traffic must be inspected by an approved firewall service at a regional hub before reaching its destination. AAR uses data-tunnel BFD performance observations and defined SLA thresholds to steer matched applications to acceptable paths.

Question 847

[Branch rollout regression] The proposed action is: Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport. The requirement is: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A branch has MPLS and broadband tunnels; the MPLS physical link fails during a payment transaction. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which observation provides the most direct success evidence?

  1. Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
  2. Observe tunnel creation, BFD state and encrypted packet forwarding following a controlled eligible traffic flow.
  3. Disable the MPLS link in a test and verify BFD transition, expected alternate path selection and transaction continuity.
  4. Trigger active-edge failure and inspect VRRP master transition, LAN default-gateway continuity and restored application traffic.

Explanation

Correct Answer

C:

Data-plane resiliency depends on healthy alternate tunnels and route/policy eligibility, not only two configured interface names. This checks whether Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport. achieved the target state rather than merely confirming a related configuration exists.

Incorrect Answers

A:

Those observations would be useful for tloc color and encapsulation on edge, where the separate issue is: An engineer needs to advertise independent MPLS and broadband overlay attachments from the same branch system IP. They do not directly establish the present dual transport data-tunnel failover result.

B:

Those observations would be useful for dynamic tunnel establishment under policy, where the separate issue is: New branch-to-branch service traffic needs an overlay tunnel that forms according to valid route/TLOC information and current fabric policy. They do not directly establish the present dual transport data-tunnel failover result.

D:

Those observations would be useful for branch vrrp gateway redundancy, where the separate issue is: A branch LAN depends on one default gateway, and failure of its active WAN Edge should transfer gateway service to a standby edge. They do not directly establish the present dual transport data-tunnel failover result.

Question 848

[Policy-change production incident] The engineer detects the following failed approach: Configuring a preference without allowing the fallback color may strand ERP traffic on a failed primary circuit. The original need remains: A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. The design prefers private MPLS for ERP while allowing public internet only if the private tunnel becomes unusable. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?

  1. Instead implement this other change: Confirm the centralized policy is activated with correct direction and site-list match, then validate route distribution changes. Its usual validation would be: Inspect active policy state, site-list membership and before/after OMP route visibility at a representative edge.
  2. Instead implement this other change: Implement a supported localized data policy on the target WAN Edge and verify it does not unintentionally affect other sites. Its usual validation would be: Compare packet handling on the target branch with a control branch and inspect the active local data policy.
  3. Instead implement this other change: Order supported data-policy sequences from specific intended matches toward an appropriate default and validate effective evaluation behavior. Its usual validation would be: Verify per-sequence counters and a controlled voice-flow trace, then confirm the specific rule acts on matching packets.
  4. Correct the design by doing the following: Define application or data-policy path eligibility and preference using the correct TLOC transport color lists and failover behavior. Then confirm success with this specific check: Test both normal ERP steering over MPLS and automatic selection of permitted internet backup after MPLS BFD failure.

Explanation

Correct Answer

D:

It restores the intended mechanism because Color-based path constraints translate transport intent into overlay forwarding rules when associated TLOCs are active.

Incorrect Answers

A:

The alternative change addresses controller policy application scope where the separate requirement is A network engineer defines a route-filtering policy but no sites change behavior after the design is saved in Manager. It does not directly repair the present failure (Configuring a preference without allowing the fallback color may strand ERP traffic on a failed primary circuit.); the needed correction is Define application or data-policy path eligibility and preference using the correct TLOC transport color lists and failover behavior.

B:

The alternative change addresses localized data-policy enforcement where the separate requirement is An isolated branch has a site-specific packet handling rule that should not be applied throughout the SD-WAN enterprise. It does not directly repair the present failure (Configuring a preference without allowing the fallback color may strand ERP traffic on a failed primary circuit.); the needed correction is Define application or data-policy path eligibility and preference using the correct TLOC transport color lists and failover behavior.

C:

The alternative change addresses data-policy sequence ordering where the separate requirement is Two overlapping application match statements exist and a broad catch-all is processed before the narrow voice policy. It does not directly repair the present failure (Configuring a preference without allowing the fallback color may strand ERP traffic on a failed primary circuit.); the needed correction is Define application or data-policy path eligibility and preference using the correct TLOC transport color lists and failover behavior.

Question 849

[Controller deployment acceptance] The engineering recommendation is: Verify the organization-name identity consistently across controllers and WAN Edges together with certificates and control configuration. The situation is: A platform team is validating control component readiness during staged site onboarding. A newly deployed controller repeatedly fails to form expected peer control connections although network transport is reachable. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?

  1. The SD-WAN organization identity is part of fabric trust and admission; inconsistent configured names can prevent secure association.
  2. Secure control sessions depend on mutually accepted identity and trust state; a usable IP path alone does not satisfy device authentication.
  3. Certificate not-before and expiration checks use device time; severe clock skew makes a valid certificate appear invalid.
  4. An ISP migration can alter NAT and route paths while leaving the PKI untouched; isolate the transport change first.

Explanation

Correct Answer

A:

The practical discriminator is the validation step: Compare organization names in controller and edge configurations and confirm authenticated peering after correction. That rationale matches the chosen action: Verify the organization-name identity consistently across controllers and WAN Edges together with certificates and control configuration.

Incorrect Answers

B:

This is a rationale for certificate validity and chain of trust, under the different situation New branch routers can reach the Validator but controller authentication fails after an internal PKI rollover. The SD-WAN organization identity is part of fabric trust and admission; inconsistent configured names can prevent secure association.

C:

This is a rationale for control session clock skew, under the different situation An on-premises controller is reachable but certificate-based control handshakes fail after a time synchronization outage. The SD-WAN organization identity is part of fabric trust and admission; inconsistent configured names can prevent secure association.

D:

This is a rationale for controller communication after wan provider migration, under the different situation Controller control sessions drop only when branches switch to a new ISP, despite unchanged certificates and organization identity. The SD-WAN organization identity is part of fabric trust and admission; inconsistent configured names can prevent secure association.

Question 850

[Branch rollout regression] The engineer detects the following failed approach: Configuring only a service-VPN static route on the inter-router link does not provision the requested transport-side TLOC extension. The original need remains: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. One WAN Edge needs to use a transport circuit physically attached to the adjacent WAN Edge at the same branch. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?

  1. Instead implement this other change: Prepare the supported ZTP/PnP onboarding path with approved device identity, transport connectivity, bootstrap parameters, and reachable discovery services. Its usual validation would be: Observe device discovery, certificate authentication, assigned configuration, controller peering, and overlay tunnel formation after power-up.
  2. Correct the design by doing the following: Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment. Then confirm success with this specific check: Check the inter-router extension link, local TLOC details, transport IP reachability and BFD tunnels over the extended path.
  3. Instead implement this other change: Configure supported transport color and encapsulation attributes per tunnel interface and validate the resulting TLOC advertisements. Its usual validation would be: Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
  4. Instead implement this other change: Inspect OMP attributes and route selection together with each next-hop TLOC/BFD state before changing local LAN metrics. Its usual validation would be: Compare OMP route details, accepted route preference, resolved TLOC and observed forwarding after simulated failure.

Explanation

Correct Answer

B:

It restores the intended mechanism because TLOC extension lets one router reach the peer-attached transport via an appropriate local interconnect, preserving independent transport identities.

Incorrect Answers

A:

The alternative change addresses wan edge zero-touch provisioning onboarding where the separate requirement is A remote branch router is shipped to a site with no local SD-WAN engineer and must discover its authorized bootstrap and controller details. It does not directly repair the present failure (Configuring only a service-VPN static route on the inter-router link does not provision the requested transport-side TLOC extension.); the needed correction is Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment.

C:

It does not directly repair the present failure (Configuring only a service-VPN static route on the inter-router link does not provision the requested transport-side TLOC extension.); the needed correction is Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment.

D:

The alternative change addresses omp route preference and resolution where the separate requirement is A WAN Edge learns two overlay paths for a remote service prefix but forwards unexpectedly after a transport outage. It does not directly repair the present failure (Configuring only a service-VPN static route on the inter-router link does not provision the requested transport-side TLOC extension.); the needed correction is Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment.

Implementing Cisco SD-WAN Solutions (ENSDWI) (300-415) Practice Tests