Cisco 300-415 Practice Test 80
Question 790
[Application degradation investigation] An operations team is analyzing security or QoS outcomes using a representative impaired application flow. Remote branches need protection from known malicious DNS destinations without proxying every unrelated enterprise application. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Blocking one hard-coded IP address as a category strategy can miss other domains or affect innocent sites sharing that IP.
- Changing a web proxy rule without routing DNS queries through the approved security service fails to apply DNS-layer protection.
- Relying on default shortest-path forwarding can bypass the required regional inspection service entirely.
- Treating simple IPsec transport encryption as equivalent to local intrusion prevention leaves exploit inspection absent.
Explanation
Correct Answer
B:The supported correction is Integrate supported DNS-layer cloud security controls with correct resolver redirection, identity and enforcement scope, and the independent evidence to seek is Test known allowed and blocked DNS categories through the intended resolver path and inspect service telemetry. Changing a web proxy rule without routing DNS queries through the approved security service fails to apply DNS-layer protection.
Incorrect Answers
A:That failure mode is primarily about url-filtering web access decisions instead of this required dns security cloud integration treatment.
C:That failure mode is primarily about service insertion for external inspection instead of this required dns security cloud integration treatment.
D:That failure mode is primarily about intrusion prevention inspection at branches instead of this required dns security cloud integration treatment.
Question 791
[Operations monitoring design] An NOC integration team is building validated management and reporting procedures. A script reads device health from Manager but silently reports success when the API returns an expired token or incomplete response. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Correlate Manager health dashboards with control peers, OMP routes, TLOC/BFD path state and affected service traffic.
- Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces.
- Handle HTTP errors, token renewal and result pagination explicitly, and reconcile returned device counts with expected inventory.
- Use supported authenticated Cisco SD-WAN Manager REST APIs with scoped credentials, bounded requests and response/error handling.
Explanation
Correct Answer
C:A transport-level API response is not necessarily complete data; authenticated error handling and pagination are required for accurate metrics. Evidence for this operations monitoring design should include: Force a token-expiry and paginated response test and confirm the job raises actionable errors instead of dropping devices.
Incorrect Answers
A:That option concerns sd-wan manager site-health dashboard triage. A transport-level API response is not necessarily complete data; authenticated error handling and pagination are required for accurate metrics. Correlate Manager health dashboards with control peers, OMP routes, TLOC/BFD path state and affected service traffic.
B:That option concerns alarm and event correlation workflow. A transport-level API response is not necessarily complete data; authenticated error handling and pagination are required for accurate metrics. That mechanism is chiefly relevant to a different alarm and event correlation workflow problem: A maintenance window produces repeated tunnel alarms and the operations team must identify their common triggering transport change.
D:That option concerns rest api health-monitor integration. A transport-level API response is not necessarily complete data; authenticated error handling and pagination are required for accurate metrics.
Question 792
[Controller deployment acceptance] The engineering recommendation is: Design multiple appropriately placed Cisco SD-WAN Controllers with reachability, consistent policy, and tested failover. The situation is: A platform team is validating control component readiness during staged site onboarding. The enterprise has one SD-WAN Controller and wants service continuity through a single planned controller-host maintenance event. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?
- Manager availability depends on the selected deployment and recovery architecture rather than just the number of edge tunnels.
- Control connections require reachable transport paths and permitted protocol/port combinations in addition to DNS and identity.
- Redundant software instances cannot provide host- or uplink-level resiliency if they share the same physical failure domain.
- Controller redundancy mitigates control-plane failure domains when peers and edge reachability are engineered to remain available.
Explanation
Correct Answer
D:The practical discriminator is the validation step: Stop one controller in a controlled test and confirm surviving control peers and continued advertised OMP reachability. Controller redundancy mitigates control-plane failure domains when peers and edge reachability are engineered to remain available.
Incorrect Answers
A:This is a rationale for management-plane disaster-recovery placement, under the different situation The Manager service lives in one physical facility and operations needs administration access during a site-level outage.
B:This is a rationale for underlay control firewall restrictions, under the different situation Several branches can resolve the controller name but their DTLS/TLS control attempts consistently time out at a perimeter firewall. Controller redundancy mitigates control-plane failure domains when peers and edge reachability are engineered to remain available.
C:Redundant software instances cannot provide host- or uplink-level resiliency if they share the same physical failure domain. This is a rationale for disaster-recovery control-site isolation, under the different situation Two control VMs share the same hypervisor and uplink while the stated requirement is resilience to host and connectivity failure. It does not justify the specific proposed mechanism for high availability for control components.
Question 793
[SD-WAN architecture design review] The engineering recommendation is: Validate each WAN Edge unique system IP and the intended common or distinct site IDs before onboarding the devices. The situation is: An enterprise WAN design board is assessing a planned topology before deploying new branches. A control-plane design uses multiple routers per site and must distinguish edge identity from site-membership behavior. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?
- System IP identifies an individual fabric node; site ID groups location membership for topology and forwarding behavior.
- Multi-Region Fabric provides structured regional topology and interregional connection behavior; arbitrary VPN labels are not a substitute for regional fabric design.
- Cisco SD-WAN Edge capability depends on the platform and its release; a cloud VM does not create equivalent physical port capacity.
- A transport locator expresses a particular reachable transport attachment of an edge; color and encapsulation distinguish overlay tunnel endpoints.
Explanation
Correct Answer
A:The practical discriminator is the validation step: Inspect advertised system IDs and site IDs on the devices and controller inventory, including expected same-site behavior. That rationale matches the chosen action: Validate each WAN Edge unique system IP and the intended common or distinct site IDs before onboarding the devices.
Incorrect Answers
B:This is a rationale for multi-region fabric segmentation, under the different situation A global SD-WAN needs region-aware transport topology while retaining interregional reachability through planned border roles. System IP identifies an individual fabric node; site ID groups location membership for topology and forwarding behavior.
C:This is a rationale for physical versus virtual wan edge placement, under the different situation A remote office has a hardware appliance while a cloud transit design needs a supported software router workload. System IP identifies an individual fabric node; site ID groups location membership for topology and forwarding behavior.
D:A transport locator expresses a particular reachable transport attachment of an edge; color and encapsulation distinguish overlay tunnel endpoints. This is a rationale for tloc identifier components, under the different situation A device has two transports and the engineer must distinguish the overlay endpoints even when both belong to the same WAN Edge system. It does not justify the specific proposed mechanism for site id and system ip identity. System IP identifies an individual fabric node; site ID groups location membership for topology and forwarding behavior.
Question 794
[Central policy design workshop] The proposed action is: Constrain centralized policy attachment to the correct site list and test membership before rollout. The requirement is: A design team is specifying policy intent for distinct sites, transports and application classes. Only ten pilot branches should receive a new route distribution behavior, but a policy change affects the whole regional fabric. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Observe traffic classification counters and selected paths for the intended app versus unrelated applications.
- Inspect the active policy definition and site-list entries, then compare route outcomes at pilot and non-pilot branches.
- Compare packet handling on the target branch with a control branch and inspect the active local data policy.
- Check effective route attributes, selected route and resulting tunnel path for a matched and an unmatched destination.
Explanation
Correct Answer
B:The applied site list determines which edges are within a centralized policy's scope; prefix matching alone does not constrain the sites. This checks whether Constrain centralized policy attachment to the correct site list and test membership before rollout. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
A:Those observations would be useful for aar application classification accuracy, where the separate issue is: A network team built an SLA steering rule, but the intended video application never appears in its policy matches. They do not directly establish the present site-list targeting in centralized policy result.
C:Those observations would be useful for localized data-policy enforcement, where the separate issue is: An isolated branch has a site-specific packet handling rule that should not be applied throughout the SD-WAN enterprise. They do not directly establish the present site-list targeting in centralized policy result.
D:Those observations would be useful for omp path preference per region, where the separate issue is: Two transport paths exist but the company wants a specific regional next hop preferred for selected service destinations. They do not directly establish the present site-list targeting in centralized policy result.
Question 795
[SD-WAN architecture design review] The engineer detects the following failed approach: A learned service prefix with no resolvable active TLOC does not by itself prove that a data tunnel can carry traffic. The original need remains: An enterprise WAN design board is assessing a planned topology before deploying new branches. A branch prefix is learned over the overlay, but an operator mistakes the advertised destination for the physical WAN endpoint carrying the tunnel. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Validate each WAN Edge unique system IP and the intended common or distinct site IDs before onboarding the devices. Its usual validation would be: Inspect advertised system IDs and site IDs on the devices and controller inventory, including expected same-site behavior.
- Instead implement this other change: Identify each TLOC by its system IP address, transport color, and encapsulation, then verify that each intended TLOC is usable. Its usual validation would be: Inspect the local TLOC entries and advertised TLOC routes for the correct system IP, color, encapsulation, and operational state.
- Correct the design by doing the following: Distinguish OMP service-prefix or vRoute advertisements from TLOC routes that describe reachable underlay transport endpoints. Then confirm success with this specific check: Check both the learned OMP prefix and its resolving active TLOC before concluding that the destination is forwardable.
- Instead implement this other change: Separate control connectivity, OMP route resolution, BFD tunnel health, and service-VPN forwarding into independent checks. Its usual validation would be: Compare control connections, OMP learned routes, TLOC state, BFD, and a traced application packet against the intended VPN path.
Explanation
Correct Answer
C:It restores the intended mechanism because OMP prefix routes identify service reachability while TLOC routes provide the transport-location information needed to resolve usable next hops.
Incorrect Answers
A:The alternative change addresses site id and system ip identity where the separate requirement is A control-plane design uses multiple routers per site and must distinguish edge identity from site-membership behavior.
B:The alternative change addresses tloc identifier components where the separate requirement is A device has two transports and the engineer must distinguish the overlay endpoints even when both belong to the same WAN Edge system. It does not directly repair the present failure (A learned service prefix with no resolvable active TLOC does not by itself prove that a data tunnel can carry traffic.); the needed correction is Distinguish OMP service-prefix or vRoute advertisements from TLOC routes that describe reachable underlay transport endpoints.
D:It does not directly repair the present failure (A learned service prefix with no resolvable active TLOC does not by itself prove that a data tunnel can carry traffic.); the needed correction is Distinguish OMP service-prefix or vRoute advertisements from TLOC routes that describe reachable underlay transport endpoints.
Question 796
[Branch rollout regression] A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A site cannot access the normal public onboarding service during commissioning and must join a privately hosted SD-WAN fabric. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Copying hard-coded branch IP addresses to every device creates conflicts and defeats per-device configuration requirements.
- Assuming EIGRP neighbors automatically form across the encrypted WAN overlay can bypass the intended service-side and OMP roles.
- Removing all legacy redistribution before the pilot overlay can carry the necessary prefixes strands still-unmigrated sites.
- Assuming public ZTP is mandatory at a completely isolated site can stall an otherwise supported local bootstrap.
Explanation
Correct Answer
D:This mistake undermines the intended offline bootstrap for restricted wan edges requirement. Assuming public ZTP is mandatory at a completely isolated site can stall an otherwise supported local bootstrap.
Incorrect Answers
A:That failure mode is primarily about configuration groups reusable feature profiles instead of this required offline bootstrap for restricted wan edges treatment. Its relevance would depend on Dozens of WAN Edges share transport settings but retain per-site IP addresses and service-VPN differences under current Manager workflows.
B:That failure mode is primarily about eigrp branch lan compatibility instead of this required offline bootstrap for restricted wan edges treatment.
C:That failure mode is primarily about branch migration from traditional wan instead of this required offline bootstrap for restricted wan edges treatment.
Question 797
[Application degradation investigation] The engineering recommendation is: Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring. The situation is: An operations team is analyzing security or QoS outcomes using a representative impaired application flow. A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?
- IPS detects and blocks matching malicious patterns after traffic is exposed to the inspection engine; IP routing policy alone does not perform payload inspection.
- Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold.
- TrustSec uses security group identity for policy classification; it should be validated separately from overlay VPN segmentation.
- DNS security evaluates DNS lookup requests and policy; it is not a substitute for every firewall or payload inspection function.
Explanation
Correct Answer
A:The practical discriminator is the validation step: Validate IPS engine state, applicable policy, signature currency and controlled detection logs while preserving authorized application flows. That rationale matches the chosen action: Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring.
Incorrect Answers
B:This is a rationale for traffic shaping versus policing, under the different situation A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. IPS detects and blocks matching malicious patterns after traffic is exposed to the inspection engine; IP routing policy alone does not perform payload inspection.
C:This is a rationale for trustsec security group policy, under the different situation A segmented enterprise wants policy decisions tied to trusted group identity rather than only per-site IPv4 address lists. IPS detects and blocks matching malicious patterns after traffic is exposed to the inspection engine; IP routing policy alone does not perform payload inspection.
D:This is a rationale for dns security cloud integration, under the different situation Remote branches need protection from known malicious DNS destinations without proxying every unrelated enterprise application. IPS detects and blocks matching malicious patterns after traffic is exposed to the inspection engine; IP routing policy alone does not perform payload inspection.
Question 798
[Application degradation investigation] The engineering recommendation is: Classify voice traffic and apply supported queuing/scheduling behavior with appropriate guaranteed or strict-priority treatment. The situation is: An operations team is analyzing security or QoS outcomes using a representative impaired application flow. Interactive voice frames compete with bulk backups on a constrained WAN circuit and need controlled service under congestion. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?
- FEC adds redundancy to permit recovery from some losses without retransmitting original application packets; it consumes bandwidth.
- QoS scheduling determines how packets leave a congested interface; application routing alone does not allocate per-class egress queue service.
- Packet duplication sends redundant copies on different paths to mitigate individual-path loss at the cost of extra network traffic.
- IPS detects and blocks matching malicious patterns after traffic is exposed to the inspection engine; IP routing policy alone does not perform payload inspection.
Explanation
Correct Answer
B:The practical discriminator is the validation step: Under controlled congestion, inspect voice queue statistics, offered load, drops, jitter and backup treatment. QoS scheduling determines how packets leave a congested interface; application routing alone does not allocate per-class egress queue service.
Incorrect Answers
A:This is a rationale for forward error correction for lossy links, under the different situation A real-time application suffers recoverable packet loss on a busy link but cannot tolerate repeated retransmission delay. FEC adds redundancy to permit recovery from some losses without retransmitting original application packets; it consumes bandwidth.
C:This is a rationale for packet duplication for high-value traffic, under the different situation A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. QoS scheduling determines how packets leave a congested interface; application routing alone does not allocate per-class egress queue service.
D:This is a rationale for intrusion prevention inspection at branches, under the different situation A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack. QoS scheduling determines how packets leave a congested interface; application routing alone does not allocate per-class egress queue service.
Question 799
[Branch rollout regression] The engineer detects the following failed approach: Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values. The original need remains: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A deployment still uses older device/feature templates while the operations team is planning a controlled migration to modern workflows. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Prepare the supported ZTP/PnP onboarding path with approved device identity, transport connectivity, bootstrap parameters, and reachable discovery services. Its usual validation would be: Observe device discovery, certificate authentication, assigned configuration, controller peering, and overlay tunnel formation after power-up.
- Instead implement this other change: Stage the WAN Edge with transport and service routing, validate coexistence and migration boundaries, then shift traffic in a controlled pilot. Its usual validation would be: Validate route tables and end-to-end flows before, during, and after cutover, including a tested rollback path.
- Correct the design by doing the following: Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback. Then confirm success with this specific check: Compare rendered device configuration before and after pilot migration and verify inventory, connectivity, and change rollback.
- Instead implement this other change: Use a supported local bootstrap configuration with the required system identity and initial transport/controller discovery values. Its usual validation would be: Verify boot-time system settings, controller reachability, accepted identity, and successful enrollment using the bootstrap path.
Explanation
Correct Answer
C:It restores the intended mechanism because Feature templates and newer configuration groups have different authoring and attachment flows; compatibility must be validated for the deployed release.
Incorrect Answers
A:The alternative change addresses wan edge zero-touch provisioning onboarding where the separate requirement is A remote branch router is shipped to a site with no local SD-WAN engineer and must discover its authorized bootstrap and controller details. It does not directly repair the present failure (Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values.); the needed correction is Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback.
B:The alternative change addresses branch migration from traditional wan where the separate requirement is An enterprise is moving one pilot office from static hub VPNs to Cisco SD-WAN without disrupting access to unchanged legacy sites. It does not directly repair the present failure (Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values.); the needed correction is Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback.
D:The alternative change addresses offline bootstrap for restricted wan edges where the separate requirement is A site cannot access the normal public onboarding service during commissioning and must join a privately hosted SD-WAN fabric.
Question 800
[SD-WAN architecture design review] The engineering recommendation is: Validate encrypted edge-to-edge overlay data tunnels and the WAN Edge forwarding behavior for traffic in the specified service VPN. The situation is: An enterprise WAN design board is assessing a planned topology before deploying new branches. The control plane displays a valid remote route, and the security reviewer must establish how branch application traffic is protected in transit. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?
- Bidirectional Forwarding Detection on SD-WAN data tunnels identifies reachability and supplies performance measurements that policies can consume.
- SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers.
- Application security and overlay encryption consume processing resources, so line-rate port specifications alone do not define delivered performance.
- WAN Edge devices forward application data through overlay tunnels, generally using IPsec where required; control-plane route distribution alone does not encrypt payloads.
Explanation
Correct Answer
D:The practical discriminator is the validation step: Confirm the operational IPsec transport tunnel and a successful service-side traffic flow over the expected overlay path. WAN Edge devices forward application data through overlay tunnels, generally using IPsec where required; control-plane route distribution alone does not encrypt payloads.
Incorrect Answers
A:This is a rationale for bfd overlay tunnel health, under the different situation An internet circuit remains physically up yet becomes lossy, and the service team needs tunnel-level evidence of forwarding quality. WAN Edge devices forward application data through overlay tunnels, generally using IPsec where required; control-plane route distribution alone does not encrypt payloads.
B:This is a rationale for sd-wan manager management-plane ownership, under the different situation Operations needs one platform to push centralized configuration and review fabric health without forwarding branch application packets through that platform. SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers.
C:Application security and overlay encryption consume processing resources, so line-rate port specifications alone do not define delivered performance. This is a rationale for wan edge crypto and throughput sizing, under the different situation A site with encrypted overlay links must sustain its target traffic level even when inspection and multiple transports are enabled.