Cisco 300-415 Practice Test 70
Question 690
[Branch rollout regression] The proposed action is: Use supported SD-WAN Manager configuration groups with reusable feature profiles and device-specific values where needed. The requirement is: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. Dozens of WAN Edges share transport settings but retain per-site IP addresses and service-VPN differences under current Manager workflows. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which observation provides the most direct success evidence?
- Preview resulting device configuration and confirm the additional command applies without conflicting with profile-managed settings.
- Inspect group membership, feature profile bindings, per-device values and successful deployment results across sample sites.
- Check OSPF neighbors, local RIB entries, OMP advertisements and the receiving remote edge's service route.
- Verify multicast group joins, traffic replication/arrival at intended branches, and absence of delivery at unapproved sites.
Explanation
Correct Answer
B:Configuration groups and profiles reduce drift while preserving intended per-device variables; they are not equivalent to a single identical CLI file. Inspect group membership, feature profile bindings, per-device values and successful deployment results across sample sites.
Incorrect Answers
A:Those observations would be useful for cli add-on for unsupported profile element, where the separate issue is: A current feature profile covers almost every site option but the approved design requires an additional supported CLI command not exposed in that profile. They do not directly establish the present configuration groups reusable feature profiles result.
C:Those observations would be useful for ospf service vpn adjacency, where the separate issue is: A branch Layer 3 switch speaks OSPF to a WAN Edge, and its learned LAN routes need to participate in the SD-WAN overlay. They do not directly establish the present configuration groups reusable feature profiles result.
D:Those observations would be useful for multicast support and routing design, where the separate issue is: A manufacturing site sends one-to-many streams to remote branches and the WAN design must support the multicast routing behavior of the deployed release. They do not directly establish the present configuration groups reusable feature profiles result.
Question 691
[Central policy design workshop] The proposed action is: Specify and validate a documented fallback or preferred behavior for AAR when every candidate transport violates the SLA. The requirement is: A design team is specifying policy intent for distinct sites, transports and application classes. A branch has two links and both exceed the current latency SLA during a regional carrier outage. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Degrade the selected link under test and correlate BFD metrics, matched application classification and chosen alternate path.
- Check service routes and policy matches, then confirm both directions traverse the designated firewall without asymmetric bypass.
- Induce both-link SLA failure and observe the actual installed fallback path, policy counters and application behavior.
- Observe traffic classification counters and selected paths for the intended app versus unrelated applications.
Explanation
Correct Answer
C:AAR cannot create a healthy path from two unhealthy circuits; fallback behavior must be intentionally designed rather than assumed. This checks whether Specify and validate a documented fallback or preferred behavior for AAR when every candidate transport violates the SLA. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
A:Those observations would be useful for application-aware routing sla thresholds, where the separate issue is: Voice users need path selection based on measured latency, jitter and packet loss, not just the cheapest WAN color. They do not directly establish the present aar fallback when no link meets sla result.
B:Those observations would be useful for service insertion path selection, where the separate issue is: Selected finance traffic must be inspected by an approved firewall service at a regional hub before reaching its destination. They do not directly establish the present aar fallback when no link meets sla result.
D:Those observations would be useful for aar application classification accuracy, where the separate issue is: A network team built an SLA steering rule, but the intended video application never appears in its policy matches. They do not directly establish the present aar fallback when no link meets sla result.
Question 692
[Post-migration operational investigation] The engineering recommendation is: Select a Cisco Catalyst SD-WAN-capable physical or virtual WAN Edge platform according to throughput, interfaces, and deployment constraints. The situation is: An operations team is reviewing an observed production overlay issue after migration from legacy WAN. A remote office has a hardware appliance while a cloud transit design needs a supported software router workload. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?
- Multi-Region Fabric provides structured regional topology and interregional connection behavior; arbitrary VPN labels are not a substitute for regional fabric design.
- SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers.
- OMP prefix routes identify service reachability while TLOC routes provide the transport-location information needed to resolve usable next hops.
- Cisco SD-WAN Edge capability depends on the platform and its release; a cloud VM does not create equivalent physical port capacity.
Explanation
Correct Answer
D:The practical discriminator is the validation step: Verify supported image/platform feature compatibility, interface mapping, licensing, and required throughput before cutover. Cisco SD-WAN Edge capability depends on the platform and its release; a cloud VM does not create equivalent physical port capacity.
Incorrect Answers
A:This is a rationale for multi-region fabric segmentation, under the different situation A global SD-WAN needs region-aware transport topology while retaining interregional reachability through planned border roles. Multi-Region Fabric provides structured regional topology and interregional connection behavior; arbitrary VPN labels are not a substitute for regional fabric design.
B:This is a rationale for sd-wan manager management-plane ownership, under the different situation Operations needs one platform to push centralized configuration and review fabric health without forwarding branch application packets through that platform. Cisco SD-WAN Edge capability depends on the platform and its release; a cloud VM does not create equivalent physical port capacity.
C:OMP prefix routes identify service reachability while TLOC routes provide the transport-location information needed to resolve usable next hops. This is a rationale for omp vroute versus transport location, under the different situation A branch prefix is learned over the overlay, but an operator mistakes the advertised destination for the physical WAN endpoint carrying the tunnel. It does not justify the specific proposed mechanism for physical versus virtual wan edge placement. Cisco SD-WAN Edge capability depends on the platform and its release; a cloud VM does not create equivalent physical port capacity.
Question 693
[Branch rollout regression] The engineer detects the following failed approach: Keeping all policies pinned to the failed MPLS color despite a healthy broadband tunnel prevents expected failover. The original need remains: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A branch has MPLS and broadband tunnels; the MPLS physical link fails during a payment transaction. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Correct the design by doing the following: Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport. Then confirm success with this specific check: Disable the MPLS link in a test and verify BFD transition, expected alternate path selection and transaction continuity.
- Instead implement this other change: Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes. Its usual validation would be: Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
- Instead implement this other change: Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment. Its usual validation would be: Check the inter-router extension link, local TLOC details, transport IP reachability and BFD tunnels over the extended path.
- Instead implement this other change: Update the supported underlay transport parameters, NAT reachability and resulting advertised TLOC state after ISP renumbering. Its usual validation would be: Compare observed transport local-properties and advertised TLOC details, then validate reestablished BFD and data traffic.
Explanation
Correct Answer
A:It restores the intended mechanism because Data-plane resiliency depends on healthy alternate tunnels and route/policy eligibility, not only two configured interface names.
Incorrect Answers
B:The alternative change addresses transport vpn 0 default-route correctness where the separate requirement is An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. It does not directly repair the present failure (Keeping all policies pinned to the failed MPLS color despite a healthy broadband tunnel prevents expected failover.); the needed correction is Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport.
C:The alternative change addresses tloc extension across dual branch routers where the separate requirement is One WAN Edge needs to use a transport circuit physically attached to the adjacent WAN Edge at the same branch.
D:The alternative change addresses tloc reachability after isp renumbering where the separate requirement is A WAN Edge changes its public transport address while remote sites keep referring to an obsolete tunnel endpoint. It does not directly repair the present failure (Keeping all policies pinned to the failed MPLS color despite a healthy broadband tunnel prevents expected failover.); the needed correction is Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport.
Question 694
[Application degradation investigation] The proposed action is: Use supported traffic shaping to buffer and pace eligible excess traffic to the intended egress rate while monitoring queue delay. The requirement is: An operations team is analyzing security or QoS outcomes using a representative impaired application flow. A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which observation provides the most direct success evidence?
- Observe duplicate traffic across eligible transports and application packet delivery during selective path impairment.
- Generate representative bursts and observe shaped output rate, queue depth and application latency.
- Under controlled congestion, inspect voice queue statistics, offered load, drops, jitter and backup treatment.
- Test allowed and blocked URL categories and inspect policy hit events without misclassifying unrelated destinations.
Explanation
Correct Answer
B:Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold. This checks whether Use supported traffic shaping to buffer and pace eligible excess traffic to the intended egress rate while monitoring queue delay. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
A:Those observations would be useful for packet duplication for high-value traffic, where the separate issue is: A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. The needed observation is: Generate representative bursts and observe shaped output rate, queue depth and application latency.
C:Those observations would be useful for qos scheduling for real-time traffic, where the separate issue is: Interactive voice frames compete with bulk backups on a constrained WAN circuit and need controlled service under congestion. They do not directly establish the present traffic shaping versus policing result.
D:Those observations would be useful for url-filtering web access decisions, where the separate issue is: A branch must block approved categories of high-risk websites while keeping allowed productivity sites reachable. They do not directly establish the present traffic shaping versus policing result.
Question 695
[Controller deployment acceptance] The engineer detects the following failed approach: Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive. The original need remains: A platform team is validating control component readiness during staged site onboarding. A branch behind a carrier NAT reaches the internet but never discovers its fabric controllers during first activation. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Check device and controller certificates, trusted roots, organization matching, validity period, and authorization before retrying connections. Its usual validation would be: Inspect certificate status and controller rejection logs, correct the trust mismatch and confirm authenticated control connections.
- Instead implement this other change: Correct system clock and NTP reachability on the affected control components before retesting certificate validity. Its usual validation would be: Compare clocks, NTP state, certificate dates and DTLS/TLS control connection results after synchronizing time.
- Correct the design by doing the following: Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage. Then confirm success with this specific check: Confirm DNS lookup of the configured Validator, permitted ports, and successful initial control exchange with the authorized Validator.
- Instead implement this other change: Inspect control-connection diagnostics and Controller identity/reachability before changing service-VPN routing policies. Its usual validation would be: Use supported show sdwan control connections/local-properties and Controller logs to isolate reachability, identity or certificate faults.
Explanation
Correct Answer
C:It restores the intended mechanism because The Validator brokers discovery and helps with NAT-related control orchestration; generic internet reachability is insufficient.
Incorrect Answers
A:The alternative change addresses certificate validity and chain of trust where the separate requirement is New branch routers can reach the Validator but controller authentication fails after an internal PKI rollover. It does not directly repair the present failure (Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive.); the needed correction is Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage.
B:The alternative change addresses control session clock skew where the separate requirement is An on-premises controller is reachable but certificate-based control handshakes fail after a time synchronization outage. It does not directly repair the present failure (Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive.); the needed correction is Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage.
D:The alternative change addresses troubleshooting control peer state where the separate requirement is A WAN Edge is joined to Manager yet reports no SD-WAN Controller control adjacency and no remote OMP route updates. It does not directly repair the present failure (Assuming a successful ping to a public website proves Validator discovery and secure admission is a false positive.); the needed correction is Inspect Validator name resolution and reachability, NAT mapping, and permitted initial control transport as the first onboarding stage.
Question 696
[Controller connectivity incident] An on-call engineer must restore the exact controller or fabric identity behavior without changing unrelated service routes. A regulated enterprise must host its SD-WAN control components on infrastructure it manages within its own data centers. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Evaluate a supported Cisco-hosted controller deployment and its reachability, identity, region, and service prerequisites.
- Inspect control-connection diagnostics and Controller identity/reachability before changing service-VPN routing policies.
- Plan supported Controller and Manager scaling, affinity, and capacity based on the actual software version and deployment guidance.
- Deploy supported on-premises controller virtual appliances with validated resources, network settings, trust, and software compatibility.
Explanation
Correct Answer
D:Self-hosted control platforms need supported hypervisor/resources and reachable management and control networks; placement alone is not a complete deployment. Evidence for this controller connectivity incident should include: Verify controller boot, network interfaces, software version alignment, certificates, and WAN Edge reachability in a staging environment.
Incorrect Answers
A:That option concerns controller cloud-hosted deployment decision. Self-hosted control platforms need supported hypervisor/resources and reachable management and control networks; placement alone is not a complete deployment.
B:That option concerns troubleshooting control peer state. Self-hosted control platforms need supported hypervisor/resources and reachable management and control networks; placement alone is not a complete deployment.
C:That option concerns controller capacity and scale planning. Self-hosted control platforms need supported hypervisor/resources and reachable management and control networks; placement alone is not a complete deployment.
Question 697
[Application degradation investigation] An operations team is analyzing security or QoS outcomes using a representative impaired application flow. A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Use supported traffic shaping to buffer and pace eligible excess traffic to the intended egress rate while monitoring queue delay.
- Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring.
- Configure supported SIG integration and data steering for the intended internet destinations while preserving private service routes.
- Classify intended applications and apply consistent DSCP marking with matching WAN Edge egress class-map/queue treatment.
Explanation
Correct Answer
A:Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold. Evidence for this application degradation investigation should include: Generate representative bursts and observe shaped output rate, queue depth and application latency.
Incorrect Answers
B:That option concerns intrusion prevention inspection at branches. Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold.
C:That option concerns secure internet gateway breakout. Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold. Configure supported SIG integration and data steering for the intended internet destinations while preserving private service routes.
D:That option concerns dscp marking and class mapping. Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold.
Question 698
[Policy-change production incident] The engineering recommendation is: Apply a supported centralized data policy matching application or destination traffic and steering it to a permitted transport or service. The situation is: A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. An SD-WAN site must steer only finance application flows through a specified service path while all other business traffic uses defaults. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?
- Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes.
- Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
- Centralized control policy influences the routes accepted and distributed by Controllers, controlling overlay reachability without carrying user payloads.
- Policy sequence priority can determine which action takes effect when traffic matches multiple rules; a broader early rule can shadow the narrow one.
Explanation
Correct Answer
B:The practical discriminator is the validation step: Trace matched finance traffic and unmatched traffic, check active edge policy state, and verify intended forwarding outcomes. Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
Incorrect Answers
A:This is a rationale for controller policy application scope, under the different situation A network engineer defines a route-filtering policy but no sites change behavior after the design is saved in Manager. It does not justify the specific proposed mechanism for centralized data-policy traffic steering.
C:This is a rationale for centralized control-policy route filtering, under the different situation A compliance requirement says only a subset of branch prefixes may be advertised to a specified regional group of SD-WAN sites. Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
D:Policy sequence priority can determine which action takes effect when traffic matches multiple rules; a broader early rule can shadow the narrow one. This is a rationale for data-policy sequence ordering, under the different situation Two overlapping application match statements exist and a broad catch-all is processed before the narrow voice policy. It does not justify the specific proposed mechanism for centralized data-policy traffic steering. Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
Question 699
[Security and QoS acceptance test] The engineer detects the following failed approach: Replacing all route segmentation with unverified SGT labels can remove a needed routing isolation boundary. The original need remains: A network-security engineering team is evaluating enforcement before changing production service flows. A segmented enterprise wants policy decisions tied to trusted group identity rather than only per-site IPv4 address lists. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Use a supported advanced malware protection capability and verify file inspection, policy scope, and event logging. Its usual validation would be: Exercise permitted test artifacts and validate file inspection events and enforcement without relying on live malware samples.
- Instead implement this other change: Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring. Its usual validation would be: Validate IPS engine state, applicable policy, signature currency and controlled detection logs while preserving authorized application flows.
- Correct the design by doing the following: Plan supported TrustSec security-group tag propagation and enforcement integration where platform and release permit it. Then confirm success with this specific check: Inspect SGT classification and propagation and verify expected permits and denies across allowed enforcement points.
- Instead implement this other change: Use a supported SD-WAN service-insertion design with explicit service reachability and data policy to steer only required flows. Its usual validation would be: Trace matching application packets through inspection and verify return-path symmetry, security logs and unaffected exempt flows.
Explanation
Correct Answer
C:It restores the intended mechanism because TrustSec uses security group identity for policy classification; it should be validated separately from overlay VPN segmentation. This directly repairs the described failure: Replacing all route segmentation with unverified SGT labels can remove a needed routing isolation boundary.
Incorrect Answers
A:The alternative change addresses malware protection on downloaded files where the separate requirement is The security team needs supported anti-malware inspection of eligible branch downloads and related policy evidence. It does not directly repair the present failure (Replacing all route segmentation with unverified SGT labels can remove a needed routing isolation boundary.); the needed correction is Plan supported TrustSec security-group tag propagation and enforcement integration where platform and release permit it.
B:The alternative change addresses intrusion prevention inspection at branches where the separate requirement is A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack. It does not directly repair the present failure (Replacing all route segmentation with unverified SGT labels can remove a needed routing isolation boundary.); the needed correction is Plan supported TrustSec security-group tag propagation and enforcement integration where platform and release permit it.
D:The alternative change addresses service insertion for external inspection where the separate requirement is A regulated application must visit a regional inspection appliance before exiting the enterprise, even when normal OMP paths are shorter. It does not directly repair the present failure (Replacing all route segmentation with unverified SGT labels can remove a needed routing isolation boundary.); the needed correction is Plan supported TrustSec security-group tag propagation and enforcement integration where platform and release permit it.
Question 700
[Security and QoS acceptance test] A network-security engineering team is evaluating enforcement before changing production service flows. Security inspection needs visibility into selected encrypted web sessions, with privacy and certificate controls reviewed first. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Use a supported SD-WAN service-insertion design with explicit service reachability and data policy to steer only required flows.
- Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring.
- Integrate supported DNS-layer cloud security controls with correct resolver redirection, identity and enforcement scope.
- Evaluate supported TLS/SSL proxy inspection with explicit decryption policy, trusted certificates and privacy exceptions.
Explanation
Correct Answer
D:Encrypted application payloads may be opaque to deep inspection without supported decryption; trust and compliance constraints govern lawful deployment. Evidence for this security and qos acceptance test should include: Validate client certificate trust, selected inspect/bypass cases, application compatibility and security event visibility in a controlled pilot.
Incorrect Answers
A:That option concerns service insertion for external inspection. Encrypted application payloads may be opaque to deep inspection without supported decryption; trust and compliance constraints govern lawful deployment.
B:That option concerns intrusion prevention inspection at branches. Encrypted application payloads may be opaque to deep inspection without supported decryption; trust and compliance constraints govern lawful deployment. Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring.
C:That option concerns dns security cloud integration. Encrypted application payloads may be opaque to deep inspection without supported decryption; trust and compliance constraints govern lawful deployment.