Cisco 300-415 Practice Test 66
Question 650
[New branch commissioning] The engineer detects the following failed approach: Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values. The original need remains: A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. A deployment still uses older device/feature templates while the operations team is planning a controlled migration to modern workflows. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Use a supported local bootstrap configuration with the required system identity and initial transport/controller discovery values. Its usual validation would be: Verify boot-time system settings, controller reachability, accepted identity, and successful enrollment using the bootstrap path.
- Correct the design by doing the following: Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback. Then confirm success with this specific check: Compare rendered device configuration before and after pilot migration and verify inventory, connectivity, and change rollback.
- Instead implement this other change: Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes. Its usual validation would be: Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
- Instead implement this other change: Configure supported transport color and encapsulation attributes per tunnel interface and validate the resulting TLOC advertisements. Its usual validation would be: Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
Explanation
Correct Answer
B:It restores the intended mechanism because Feature templates and newer configuration groups have different authoring and attachment flows; compatibility must be validated for the deployed release. This directly repairs the described failure: Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values.
Incorrect Answers
A:The alternative change addresses offline bootstrap for restricted wan edges where the separate requirement is A site cannot access the normal public onboarding service during commissioning and must join a privately hosted SD-WAN fabric. It does not directly repair the present failure (Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values.); the needed correction is Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback.
C:The alternative change addresses transport vpn 0 default-route correctness where the separate requirement is An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. It does not directly repair the present failure (Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values.); the needed correction is Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback.
D:The alternative change addresses tloc color and encapsulation on edge where the separate requirement is An engineer needs to advertise independent MPLS and broadband overlay attachments from the same branch system IP. It does not directly repair the present failure (Assuming a template can simply be renamed into a feature profile without conversion may break site-specific values.); the needed correction is Inventory existing template variables and transition to supported configuration groups or workflows after testing feature parity and rollback.
Question 651
[New branch commissioning] The engineering recommendation is: Prepare the supported ZTP/PnP onboarding path with approved device identity, transport connectivity, bootstrap parameters, and reachable discovery services. The situation is: A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. A remote branch router is shipped to a site with no local SD-WAN engineer and must discover its authorized bootstrap and controller details. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?
- A regional hub is an edge routing and service aggregation role, not a replacement for the SD-WAN Controllers.
- Bootstrap methods provide initial parameters for secure controller discovery when standard internet-assisted onboarding is unavailable.
- Automated onboarding works when the device is authorized and can find its initial controller; physical power and internet access alone do not prove fabric membership.
- OMP route attributes and TLOC availability affect usable overlay forwarding; the best path cannot be inferred from one route field alone.
Explanation
Correct Answer
C:The practical discriminator is the validation step: Observe device discovery, certificate authentication, assigned configuration, controller peering, and overlay tunnel formation after power-up. Automated onboarding works when the device is authorized and can find its initial controller; physical power and internet access alone do not prove fabric membership.
Incorrect Answers
A:This is a rationale for regional hub wan edge placement, under the different situation Several branches require deterministic access to a regional hub for shared services, while overlay edge policy must remain centrally manageable. Automated onboarding works when the device is authorized and can find its initial controller; physical power and internet access alone do not prove fabric membership.
B:This is a rationale for offline bootstrap for restricted wan edges, under the different situation A site cannot access the normal public onboarding service during commissioning and must join a privately hosted SD-WAN fabric.
D:This is a rationale for omp route preference and resolution, under the different situation A WAN Edge learns two overlay paths for a remote service prefix but forwards unexpectedly after a transport outage. OMP route attributes and TLOC availability affect usable overlay forwarding; the best path cannot be inferred from one route field alone.
Question 652
[SD-WAN architecture design review] An enterprise WAN design board is assessing a planned topology before deploying new branches. An enterprise must exchange traffic among on-premises branches and multiple cloud providers without implementing isolated one-off tunnels at every site. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Treating all sites as a single undifferentiated mesh defeats a design whose primary constraint is region-aware topology.
- Adding an arbitrary public internet route to a private cloud prefix does not establish supported overlay integration.
- Sending every public SaaS flow into the private cloud overlay or every private cloud prefix to ordinary NAT conflates distinct services.
- Creating overlapping untracked ad hoc cloud tunnels may bypass the centralized topology and policy constraints.
Explanation
Correct Answer
D:This mistake undermines the intended cloud onramp multicloud connectivity requirement. The supported correction is Evaluate Cloud OnRamp for Multicloud/Interconnect based on supported cloud attachments and centralized overlay connectivity, and the independent evidence to seek is Review attachment status, propagated prefixes, encryption or interconnect properties, and reachability among intended domains.
Incorrect Answers
A:That failure mode is primarily about multi-region fabric segmentation instead of this required cloud onramp multicloud connectivity treatment.
B:That failure mode is primarily about cloud onramp for iaas access instead of this required cloud onramp multicloud connectivity treatment. For this case, the principal failure mode is Creating overlapping untracked ad hoc cloud tunnels may bypass the centralized topology and policy constraints.
C:That failure mode is primarily about direct internet versus cloud overlay access instead of this required cloud onramp multicloud connectivity treatment. For this case, the principal failure mode is Creating overlapping untracked ad hoc cloud tunnels may bypass the centralized topology and policy constraints.
Question 653
[Branch rollout regression] A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. Dozens of WAN Edges share transport settings but retain per-site IP addresses and service-VPN differences under current Manager workflows. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Copying hard-coded branch IP addresses to every device creates conflicts and defeats per-device configuration requirements.
- Treating multicast destination addresses as ordinary unicast OMP prefixes ignores group membership and replication requirements.
- Running OSPF only on the WAN transport interface does not accomplish the requested service-VPN LAN prefix exchange.
- Replacing the entire reusable configuration group with unmanaged manual changes can create drift to solve a small CLI gap.
Explanation
Correct Answer
A:The supported correction is Use supported SD-WAN Manager configuration groups with reusable feature profiles and device-specific values where needed, and the independent evidence to seek is Inspect group membership, feature profile bindings, per-device values and successful deployment results across sample sites. Copying hard-coded branch IP addresses to every device creates conflicts and defeats per-device configuration requirements.
Incorrect Answers
B:That failure mode is primarily about multicast support and routing design instead of this required configuration groups reusable feature profiles treatment.
C:That failure mode is primarily about ospf service vpn adjacency instead of this required configuration groups reusable feature profiles treatment.
D:That failure mode is primarily about cli add-on for unsupported profile element instead of this required configuration groups reusable feature profiles treatment.
Question 654
[Branch rollout regression] The engineering recommendation is: Configure OSPF within the intended service VPN and explicitly validate route exchange/advertisement into OMP as required. The situation is: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A branch Layer 3 switch speaks OSPF to a WAN Edge, and its learned LAN routes need to participate in the SD-WAN overlay. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?
- OMP distributes service prefixes in the overlay; dynamic routing in a local service VPN must be imported or advertised appropriately.
- Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites.
- VRRP provides a shared virtual default-gateway role for LAN hosts, while overlay route and TLOC resiliency are separate checks.
- VPN 0 carries transport-side IP connectivity; service-VPN routes do not substitute for a usable controller/peer underlay path.
Explanation
Correct Answer
B:The practical discriminator is the validation step: Check OSPF neighbors, local RIB entries, OMP advertisements and the receiving remote edge's service route. Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites.
Incorrect Answers
A:This is a rationale for omp advertisement of branch lan prefixes, under the different situation Two WAN Edge routers show established controller connections but one cannot reach the other site's advertised office subnet. Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites.
C:VRRP provides a shared virtual default-gateway role for LAN hosts, while overlay route and TLOC resiliency are separate checks. This is a rationale for branch vrrp gateway redundancy, under the different situation A branch LAN depends on one default gateway, and failure of its active WAN Edge should transfer gateway service to a standby edge. It does not justify the specific proposed mechanism for ospf service vpn adjacency. Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites.
D:This is a rationale for transport vpn 0 default-route correctness, under the different situation An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. It does not justify the specific proposed mechanism for ospf service vpn adjacency.
Question 655
[Application degradation investigation] The engineer detects the following failed approach: Marking packets without an egress queue policy may not protect the voice class when the link saturates. The original need remains: An operations team is analyzing security or QoS outcomes using a representative impaired application flow. Interactive voice frames compete with bulk backups on a constrained WAN circuit and need controlled service under congestion. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Evaluate supported packet duplication for the selected class when bandwidth cost and receiving behavior are acceptable. Its usual validation would be: Observe duplicate traffic across eligible transports and application packet delivery during selective path impairment.
- Instead implement this other change: Configure supported SIG integration and data steering for the intended internet destinations while preserving private service routes. Its usual validation would be: Verify selected traffic reaches the SIG cloud service, policy logs show inspection and internal service traffic remains on approved paths.
- Correct the design by doing the following: Classify voice traffic and apply supported queuing/scheduling behavior with appropriate guaranteed or strict-priority treatment. Then confirm success with this specific check: Under controlled congestion, inspect voice queue statistics, offered load, drops, jitter and backup treatment.
- Instead implement this other change: Enable and tune supported IPS inspection with appropriate signature content, traffic direction and operational monitoring. Its usual validation would be: Validate IPS engine state, applicable policy, signature currency and controlled detection logs while preserving authorized application flows.
Explanation
Correct Answer
C:It restores the intended mechanism because QoS scheduling determines how packets leave a congested interface; application routing alone does not allocate per-class egress queue service. This directly repairs the described failure: Marking packets without an egress queue policy may not protect the voice class when the link saturates.
Incorrect Answers
A:The alternative change addresses packet duplication for high-value traffic where the separate requirement is A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. It does not directly repair the present failure (Marking packets without an egress queue policy may not protect the voice class when the link saturates.); the needed correction is Classify voice traffic and apply supported queuing/scheduling behavior with appropriate guaranteed or strict-priority treatment.
B:The alternative change addresses secure internet gateway breakout where the separate requirement is An enterprise requires branch internet egress to use a cloud Secure Internet Gateway for policy enforcement and audit. It does not directly repair the present failure (Marking packets without an egress queue policy may not protect the voice class when the link saturates.); the needed correction is Classify voice traffic and apply supported queuing/scheduling behavior with appropriate guaranteed or strict-priority treatment.
D:The alternative change addresses intrusion prevention inspection at branches where the separate requirement is A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack. It does not directly repair the present failure (Marking packets without an egress queue policy may not protect the voice class when the link saturates.); the needed correction is Classify voice traffic and apply supported queuing/scheduling behavior with appropriate guaranteed or strict-priority treatment.
Question 656
[Post-migration operational investigation] The engineer detects the following failed approach: Assuming that a colocation connection automatically inspects all branch traffic ignores service steering requirements. The original need remains: An operations team is reviewing an observed production overlay issue after migration from legacy WAN. A company centralizes security services in a colocation location and wants selected branch application flows routed through those services. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Design supported Cloud OnRamp for IaaS connectivity and validated virtual edge or cloud interconnect integration for those workloads. Its usual validation would be: Verify cloud attachment, service prefix exchange, and end-to-end protected forwarding between a branch and cloud workload.
- Instead implement this other change: Use Cisco SD-WAN Manager for configuration administration, monitoring, and operational workflows, leaving user traffic to the WAN Edge data plane. Its usual validation would be: Verify device inventory, successful configuration tasks, and operational telemetry in Manager while branch-to-branch packets take edge tunnels.
- Instead implement this other change: Verify OMP adjacency with the Cisco SD-WAN Controllers and appropriate advertisement of service-side prefixes and transport locators. Its usual validation would be: Inspect OMP peers, received routes, TLOC resolution, and the installed service-VPN route at the receiving edge.
- Correct the design by doing the following: Use a supported SD-WAN colocation/service insertion design with explicit service reachability and data-policy steering. Then confirm success with this specific check: Trace the policy-matched flow through the designated colocation service path and verify the return route.
Explanation
Correct Answer
D:It restores the intended mechanism because Colocation integration is a fabric service-delivery pattern; forwarding to service resources must be enabled by routes and policy. This directly repairs the described failure: Assuming that a colocation connection automatically inspects all branch traffic ignores service steering requirements.
Incorrect Answers
A:The alternative change addresses cloud onramp for iaas access where the separate requirement is Branch networks must reach workloads hosted in a public IaaS VPC/VNet through a planned SD-WAN attachment rather than ad hoc public routes.
B:The alternative change addresses sd-wan manager management-plane ownership where the separate requirement is Operations needs one platform to push centralized configuration and review fabric health without forwarding branch application packets through that platform. It does not directly repair the present failure (Assuming that a colocation connection automatically inspects all branch traffic ignores service steering requirements.); the needed correction is Use a supported SD-WAN colocation/service insertion design with explicit service reachability and data-policy steering.
C:The alternative change addresses sd-wan controller omp route distribution where the separate requirement is Two authorized edge sites establish control sessions but need overlay service prefixes and policy-selected next hops to be distributed consistently. It does not directly repair the present failure (Assuming that a colocation connection automatically inspects all branch traffic ignores service steering requirements.); the needed correction is Use a supported SD-WAN colocation/service insertion design with explicit service reachability and data-policy steering.
Question 657
[Controller connectivity incident] The engineer detects the following failed approach: Assuming one existing Controller instance scales indefinitely risks admission bottlenecks and degraded resilience. The original need remains: An on-call engineer must restore the exact controller or fabric identity behavior without changing unrelated service routes. A multi-region enterprise doubles its WAN Edge count and new control sessions exceed the validated operational envelope. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Correct the design by doing the following: Plan supported Controller and Manager scaling, affinity, and capacity based on the actual software version and deployment guidance. Then confirm success with this specific check: Review documented scale thresholds, control session load and failover performance at representative projected device counts.
- Instead implement this other change: Check device and controller certificates, trusted roots, organization matching, validity period, and authorization before retrying connections. Its usual validation would be: Inspect certificate status and controller rejection logs, correct the trust mismatch and confirm authenticated control connections.
- Instead implement this other change: Compare new-ISP underlay addresses, NAT behavior, transport policy and controller reachability before changing certificates. Its usual validation would be: Verify source WAN transport, DNS, NAT mappings, reachable controller endpoints, and restoration after policy correction.
- Instead implement this other change: Allow the required controller/edge control traffic for the platform and deployed connection mode, then validate encrypted sessions. Its usual validation would be: Compare allowed transport flows and control connection logs before and after narrow firewall policy remediation.
Explanation
Correct Answer
A:It restores the intended mechanism because Controller role capacity and fabric scale are release/platform dependent, requiring explicit capacity validation rather than fixed assumed ratios.
Incorrect Answers
B:The alternative change addresses certificate validity and chain of trust where the separate requirement is New branch routers can reach the Validator but controller authentication fails after an internal PKI rollover. It does not directly repair the present failure (Assuming one existing Controller instance scales indefinitely risks admission bottlenecks and degraded resilience.); the needed correction is Plan supported Controller and Manager scaling, affinity, and capacity based on the actual software version and deployment guidance.
C:The alternative change addresses controller communication after wan provider migration where the separate requirement is Controller control sessions drop only when branches switch to a new ISP, despite unchanged certificates and organization identity. It does not directly repair the present failure (Assuming one existing Controller instance scales indefinitely risks admission bottlenecks and degraded resilience.); the needed correction is Plan supported Controller and Manager scaling, affinity, and capacity based on the actual software version and deployment guidance.
D:The alternative change addresses underlay control firewall restrictions where the separate requirement is Several branches can resolve the controller name but their DTLS/TLS control attempts consistently time out at a perimeter firewall. It does not directly repair the present failure (Assuming one existing Controller instance scales indefinitely risks admission bottlenecks and degraded resilience.); the needed correction is Plan supported Controller and Manager scaling, affinity, and capacity based on the actual software version and deployment guidance.
Question 658
[Policy-change production incident] The engineer detects the following failed approach: Treating a prediction as a replacement for measured tunnel health and policy eligibility can cause unsupported steering decisions. The original need remains: A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. The operations team is considering AI-driven path recommendations to avoid impending quality problems on a WAN link. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Validate the application classification or match criteria and the applied AAR policy before adjusting WAN interface routing. Its usual validation would be: Observe traffic classification counters and selected paths for the intended app versus unrelated applications.
- Correct the design by doing the following: Evaluate supported Predictive Path Recommendation prerequisites and compare recommendations with live BFD/SLA evidence before adopting policy changes. Then confirm success with this specific check: Review recommended paths, supported model/feature enablement, actual application quality and post-change metrics during a pilot.
- Instead implement this other change: Apply a supported centralized data policy matching application or destination traffic and steering it to a permitted transport or service. Its usual validation would be: Trace matched finance traffic and unmatched traffic, check active edge policy state, and verify intended forwarding outcomes.
- Instead implement this other change: Build VPN-specific centralized policy and connectivity arrangements, validating each segment's desired topology independently. Its usual validation would be: Trace guest internet flows and management VPN service flows separately, confirming the respective local and central next hops.
Explanation
Correct Answer
B:It restores the intended mechanism because Predictive guidance is an assisted feature within an eligible SD-WAN release and needs proper telemetry and operational validation; it is not proof of guaranteed future performance.
Incorrect Answers
A:The alternative change addresses aar application classification accuracy where the separate requirement is A network team built an SLA steering rule, but the intended video application never appears in its policy matches. It does not directly repair the present failure (Treating a prediction as a replacement for measured tunnel health and policy eligibility can cause unsupported steering decisions.); the needed correction is Evaluate supported Predictive Path Recommendation prerequisites and compare recommendations with live BFD/SLA evidence before adopting policy changes.
C:The alternative change addresses centralized data-policy traffic steering where the separate requirement is An SD-WAN site must steer only finance application flows through a specified service path while all other business traffic uses defaults. It does not directly repair the present failure (Treating a prediction as a replacement for measured tunnel health and policy eligibility can cause unsupported steering decisions.); the needed correction is Evaluate supported Predictive Path Recommendation prerequisites and compare recommendations with live BFD/SLA evidence before adopting policy changes.
D:The alternative change addresses per-vpn hub topology where the separate requirement is The enterprise needs guest traffic to exit locally, but management VPN traffic must traverse a central inspection hub. It does not directly repair the present failure (Treating a prediction as a replacement for measured tunnel health and policy eligibility can cause unsupported steering decisions.); the needed correction is Evaluate supported Predictive Path Recommendation prerequisites and compare recommendations with live BFD/SLA evidence before adopting policy changes.
Question 659
[Central policy design workshop] The engineer detects the following failed approach: Advertising the destination but never steering the matching flow into the service node defeats required inspection. The original need remains: A design team is specifying policy intent for distinct sites, transports and application classes. Selected finance traffic must be inspected by an approved firewall service at a regional hub before reaching its destination. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Build VPN-specific centralized policy and connectivity arrangements, validating each segment's desired topology independently. Its usual validation would be: Trace guest internet flows and management VPN service flows separately, confirming the respective local and central next hops.
- Instead implement this other change: Implement the supported centralized control policy and TLOC/OMP route treatment that creates the required hub-and-spoke overlay topology. Its usual validation would be: Verify spoke route next hops, reachable hub TLOCs, and actual spoke-to-spoke traffic through the designated regional hub.
- Correct the design by doing the following: Use supported service insertion with appropriate service advertisement, policy steering and symmetric forwarding validation. Then confirm success with this specific check: Check service routes and policy matches, then confirm both directions traverse the designated firewall without asymmetric bypass.
- Instead implement this other change: Implement policy-based regional internet breakout with explicit route, service and security considerations for the selected sites. Its usual validation would be: Confirm matching traffic reaches the approved regional exit while unrelated local enterprise traffic remains correctly routed.
Explanation
Correct Answer
C:It restores the intended mechanism because Service insertion combines advertised service availability with policy-based packet handling; merely deploying a firewall VM is insufficient. This directly repairs the described failure: Advertising the destination but never steering the matching flow into the service node defeats required inspection.
Incorrect Answers
A:The alternative change addresses per-vpn hub topology where the separate requirement is The enterprise needs guest traffic to exit locally, but management VPN traffic must traverse a central inspection hub. It does not directly repair the present failure (Advertising the destination but never steering the matching flow into the service node defeats required inspection.); the needed correction is Use supported service insertion with appropriate service advertisement, policy steering and symmetric forwarding validation.
B:The alternative change addresses hub-and-spoke topology by omp policy where the separate requirement is A retail organization wants branch traffic between stores to traverse regional hubs instead of forming unconstrained direct paths. It does not directly repair the present failure (Advertising the destination but never steering the matching flow into the service node defeats required inspection.); the needed correction is Use supported service insertion with appropriate service advertisement, policy steering and symmetric forwarding validation.
D:The alternative change addresses regional internet breakout where the separate requirement is Branches in one jurisdiction must use an approved regional egress gateway for selected internet applications. It does not directly repair the present failure (Advertising the destination but never steering the matching flow into the service node defeats required inspection.); the needed correction is Use supported service insertion with appropriate service advertisement, policy steering and symmetric forwarding validation.
Question 660
[SD-WAN architecture design review] An enterprise WAN design board is assessing a planned topology before deploying new branches. A control-plane design uses multiple routers per site and must distinguish edge identity from site-membership behavior. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Treating a device system IP alone as the complete TLOC identity can merge otherwise distinct transport paths.
- Trying to hairpin normal application data through Manager confuses management functions with the forwarding plane.
- Closing the incident because control peers are up ignores a possible data-plane fault.
- Giving different routers identical system IP values creates identity conflict even when their site IDs are correct.
Explanation
Correct Answer
D:The supported correction is Validate each WAN Edge unique system IP and the intended common or distinct site IDs before onboarding the devices, and the independent evidence to seek is Inspect advertised system IDs and site IDs on the devices and controller inventory, including expected same-site behavior. Giving different routers identical system IP values creates identity conflict even when their site IDs are correct.
Incorrect Answers
A:That failure mode is primarily about tloc identifier components instead of this required site id and system ip identity treatment.
B:That failure mode is primarily about sd-wan manager management-plane ownership instead of this required site id and system ip identity treatment.
C:That failure mode is primarily about control-plane versus data-plane failure isolation instead of this required site id and system ip identity treatment.