Cisco 300-415 Practice Test 50
Question 490
[Central policy design workshop] A design team is specifying policy intent for distinct sites, transports and application classes. The enterprise needs guest traffic to exit locally, but management VPN traffic must traverse a central inspection hub. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Using a route-advertisement filter alone cannot necessarily classify and steer only the targeted finance flow.
- Applying one hub-only policy to every service VPN can defeat the required direct guest egress behavior.
- Allowing all spoke TLOCs and prefixes indiscriminately may create unintended direct branch-to-branch paths.
- Applying a broad centralized site list for a one-off local rule risks changing other offices' traffic.
Explanation
Correct Answer
B:This mistake undermines the intended per-vpn hub topology requirement. The supported correction is Build VPN-specific centralized policy and connectivity arrangements, validating each segment's desired topology independently, and the independent evidence to seek is Trace guest internet flows and management VPN service flows separately, confirming the respective local and central next hops.
Incorrect Answers
A:That failure mode is primarily about centralized data-policy traffic steering instead of this required per-vpn hub topology treatment.
C:That failure mode is primarily about hub-and-spoke topology by omp policy instead of this required per-vpn hub topology treatment. For this case, the principal failure mode is Applying one hub-only policy to every service VPN can defeat the required direct guest egress behavior.
D:That failure mode is primarily about localized data-policy enforcement instead of this required per-vpn hub topology treatment.
Question 491
[Application degradation investigation] An operations team is analyzing security or QoS outcomes using a representative impaired application flow. A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Evaluate supported forward error correction for the eligible SD-WAN data path and balance recovered loss against added overhead.
- Classify intended applications and apply consistent DSCP marking with matching WAN Edge egress class-map/queue treatment.
- Evaluate supported packet duplication for the selected class when bandwidth cost and receiving behavior are acceptable.
- Use a supported SD-WAN service-insertion design with explicit service reachability and data policy to steer only required flows.
Explanation
Correct Answer
C:Packet duplication sends redundant copies on different paths to mitigate individual-path loss at the cost of extra network traffic. Evidence for this application degradation investigation should include: Observe duplicate traffic across eligible transports and application packet delivery during selective path impairment.
Incorrect Answers
A:That option concerns forward error correction for lossy links. Packet duplication sends redundant copies on different paths to mitigate individual-path loss at the cost of extra network traffic.
B:That option concerns dscp marking and class mapping. Packet duplication sends redundant copies on different paths to mitigate individual-path loss at the cost of extra network traffic. That mechanism is chiefly relevant to a different dscp marking and class mapping problem: Branch traffic leaves the LAN with inconsistent priority markings and the transport class policy cannot identify voice reliably.
D:That option concerns service insertion for external inspection. Packet duplication sends redundant copies on different paths to mitigate individual-path loss at the cost of extra network traffic.
Question 492
[Central policy design workshop] The proposed action is: Use SD-WAN Manager policy activation history and supported rollback/redeploy controls, verifying resulting edge policy and data flows. The requirement is: A design team is specifying policy intent for distinct sites, transports and application classes. A global data-policy push causes an unexpected outage and the operator must restore the prior known-good traffic treatment. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Observe traffic classification counters and selected paths for the intended app versus unrelated applications.
- Inspect active policy state, site-list membership and before/after OMP route visibility at a representative edge.
- Inspect received and advertised OMP routes at Controllers and affected edges; verify excluded prefixes are absent where prohibited.
- Compare active before/after policy versions and validate restored targeted flows and unaffected control sites.
Explanation
Correct Answer
D:Policy lifecycle management needs a known-good state and post-change evidence; deleting random local rules may not undo a centralized push. Compare active before/after policy versions and validate restored targeted flows and unaffected control sites.
Incorrect Answers
A:Those observations would be useful for aar application classification accuracy, where the separate issue is: A network team built an SLA steering rule, but the intended video application never appears in its policy matches. The needed observation is: Compare active before/after policy versions and validate restored targeted flows and unaffected control sites.
B:Those observations would be useful for controller policy application scope, where the separate issue is: A network engineer defines a route-filtering policy but no sites change behavior after the design is saved in Manager. They do not directly establish the present policy activation and rollback validation result.
C:Those observations would be useful for centralized control-policy route filtering, where the separate issue is: A compliance requirement says only a subset of branch prefixes may be advertised to a specified regional group of SD-WAN sites. They do not directly establish the present policy activation and rollback validation result.
Question 493
[Operations monitoring design] An NOC integration team is building validated management and reporting procedures. A customer wants an evidence-based weekly report of link loss, jitter, latency and impacted application periods. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Exporting only current online/offline device counts cannot establish when a voice SLA was violated.
- Treating any nonempty JSON body as a successful complete inventory can hide authentication failures or missing pages.
- Factory resetting devices without analyzing policy change history may remove good configurations and expand the outage.
- Assuming an external identity-provider login automatically grants the correct SD-WAN administrative role ignores authorization mapping.
Explanation
Correct Answer
A:This mistake undermines the intended network reporting baseline for sla breaches requirement. The supported correction is Define supported telemetry collection and reporting that preserves per-transport and application performance history, and the independent evidence to seek is Generate the report for a defined week and reconcile tunnel/application metrics against known injected test impairment.
Incorrect Answers
B:That failure mode is primarily about rest api automation error handling instead of this required network reporting baseline for sla breaches treatment.
C:That failure mode is primarily about configuration-change audit and rollback instead of this required network reporting baseline for sla breaches treatment.
D:That failure mode is primarily about authentication integration for manager users instead of this required network reporting baseline for sla breaches treatment.
Question 494
[Security and QoS acceptance test] The proposed action is: Configure an appropriate supported application-aware enterprise firewall policy with correct application selectors and enforcement points. The requirement is: A network-security engineering team is evaluating enforcement before changing production service flows. An operations team needs to allow business applications but deny risky traffic based on recognized application identity at WAN Edges. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Trace matching application packets through inspection and verify return-path symmetry, security logs and unaffected exempt flows.
- Generate known permitted and prohibited application traffic, inspect firewall hit logs and validate allow/deny outcomes.
- Generate representative bursts and observe shaped output rate, queue depth and application latency.
- Validate IPS engine state, applicable policy, signature currency and controlled detection logs while preserving authorized application flows.
Explanation
Correct Answer
B:Application-aware firewall functionality can classify application traffic and enforce security intent more precisely than unrestricted address-only routing. Generate known permitted and prohibited application traffic, inspect firewall hit logs and validate allow/deny outcomes.
Incorrect Answers
A:Those observations would be useful for service insertion for external inspection, where the separate issue is: A regulated application must visit a regional inspection appliance before exiting the enterprise, even when normal OMP paths are shorter. They do not directly establish the present application-aware enterprise firewall enforcement result.
C:Those observations would be useful for traffic shaping versus policing, where the separate issue is: A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. The needed observation is: Generate known permitted and prohibited application traffic, inspect firewall hit logs and validate allow/deny outcomes.
D:Those observations would be useful for intrusion prevention inspection at branches, where the separate issue is: A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack. They do not directly establish the present application-aware enterprise firewall enforcement result.
Question 495
[Branch rollout regression] The engineer detects the following failed approach: Using the Controller as the data-plane hub for ordinary branch payloads confuses control and forwarding responsibilities. The original need remains: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. Several branches require deterministic access to a regional hub for shared services, while overlay edge policy must remain centrally manageable. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Advertise the intended service-side LAN route into OMP and verify its acceptance and installation at the destination edge. Its usual validation would be: Inspect local service routing, advertised OMP prefixes, controller received routes and the remote installed service-VPN entry.
- Instead implement this other change: Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment. Its usual validation would be: Check the inter-router extension link, local TLOC details, transport IP reachability and BFD tunnels over the extended path.
- Correct the design by doing the following: Deploy a supported regional WAN Edge hub with service reachability, transport TLOCs, and route/policy design for the targeted branches. Then confirm success with this specific check: Verify hub service prefixes, branch OMP reachability, tunnel health, and actual branch-to-hub application forwarding.
- Instead implement this other change: Plan supported multicast mechanisms, service-side joins and overlay replication or forwarding behavior for the exact Cisco SD-WAN version. Its usual validation would be: Verify multicast group joins, traffic replication/arrival at intended branches, and absence of delivery at unapproved sites.
Explanation
Correct Answer
C:It restores the intended mechanism because A regional hub is an edge routing and service aggregation role, not a replacement for the SD-WAN Controllers. This directly repairs the described failure: Using the Controller as the data-plane hub for ordinary branch payloads confuses control and forwarding responsibilities.
Incorrect Answers
A:The alternative change addresses omp advertisement of branch lan prefixes where the separate requirement is Two WAN Edge routers show established controller connections but one cannot reach the other site's advertised office subnet. It does not directly repair the present failure (Using the Controller as the data-plane hub for ordinary branch payloads confuses control and forwarding responsibilities.); the needed correction is Deploy a supported regional WAN Edge hub with service reachability, transport TLOCs, and route/policy design for the targeted branches.
B:The alternative change addresses tloc extension across dual branch routers where the separate requirement is One WAN Edge needs to use a transport circuit physically attached to the adjacent WAN Edge at the same branch. It does not directly repair the present failure (Using the Controller as the data-plane hub for ordinary branch payloads confuses control and forwarding responsibilities.); the needed correction is Deploy a supported regional WAN Edge hub with service reachability, transport TLOCs, and route/policy design for the targeted branches.
D:The alternative change addresses multicast support and routing design where the separate requirement is A manufacturing site sends one-to-many streams to remote branches and the WAN design must support the multicast routing behavior of the deployed release. It does not directly repair the present failure (Using the Controller as the data-plane hub for ordinary branch payloads confuses control and forwarding responsibilities.); the needed correction is Deploy a supported regional WAN Edge hub with service reachability, transport TLOCs, and route/policy design for the targeted branches.
Question 496
[Security and QoS acceptance test] A network-security engineering team is evaluating enforcement before changing production service flows. A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Treating simple IPsec transport encryption as equivalent to local intrusion prevention leaves exploit inspection absent.
- Assuming FEC eliminates congestion capacity limits can worsen a saturated circuit with additional parity traffic.
- Blocking one hard-coded IP address as a category strategy can miss other domains or affect innocent sites sharing that IP.
- Replacing a shaping requirement with strict dropping police rates may unnecessarily discard burst packets rather than smooth them.
Explanation
Correct Answer
D:This mistake undermines the intended traffic shaping versus policing requirement. Replacing a shaping requirement with strict dropping police rates may unnecessarily discard burst packets rather than smooth them.
Incorrect Answers
A:That failure mode is primarily about intrusion prevention inspection at branches instead of this required traffic shaping versus policing treatment. Its relevance would depend on A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack.
B:That failure mode is primarily about forward error correction for lossy links instead of this required traffic shaping versus policing treatment.
C:That failure mode is primarily about url-filtering web access decisions instead of this required traffic shaping versus policing treatment. Its relevance would depend on A branch must block approved categories of high-risk websites while keeping allowed productivity sites reachable.
Question 497
[Post-migration operational investigation] An operations team is reviewing an observed production overlay issue after migration from legacy WAN. Operations needs one platform to push centralized configuration and review fabric health without forwarding branch application packets through that platform. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Use Cisco SD-WAN Manager for configuration administration, monitoring, and operational workflows, leaving user traffic to the WAN Edge data plane.
- Use a supported SD-WAN colocation/service insertion design with explicit service reachability and data-policy steering.
- Use BFD session health and measured loss, latency, and jitter for the relevant overlay tunnels to evaluate path condition.
- Size the supported WAN Edge platform for encrypted forwarding, service features, and peak throughput rather than raw unencrypted port speed.
Explanation
Correct Answer
A:SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers. Evidence for this post-migration operational investigation should include: Verify device inventory, successful configuration tasks, and operational telemetry in Manager while branch-to-branch packets take edge tunnels.
Incorrect Answers
B:That option concerns cloud onramp colocation service chaining. SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers.
C:That option concerns bfd overlay tunnel health. SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers. Use BFD session health and measured loss, latency, and jitter for the relevant overlay tunnels to evaluate path condition.
D:That option concerns wan edge crypto and throughput sizing. SD-WAN Manager (formerly vManage) owns the management plane; data forwarding occurs on edges and control routes are coordinated separately by Controllers.
Question 498
[New branch commissioning] A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. One WAN Edge needs to use a transport circuit physically attached to the adjacent WAN Edge at the same branch. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport.
- Configure a supported TLOC-extension arrangement on the interconnected routers and verify transport reachability and tunnel establishment.
- Advertise the intended service-side LAN route into OMP and verify its acceptance and installation at the destination edge.
- Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes.
Explanation
Correct Answer
B:TLOC extension lets one router reach the peer-attached transport via an appropriate local interconnect, preserving independent transport identities. Evidence for this new branch commissioning should include: Check the inter-router extension link, local TLOC details, transport IP reachability and BFD tunnels over the extended path.
Incorrect Answers
A:That option concerns dual transport data-tunnel failover. TLOC extension lets one router reach the peer-attached transport via an appropriate local interconnect, preserving independent transport identities.
C:That option concerns omp advertisement of branch lan prefixes. TLOC extension lets one router reach the peer-attached transport via an appropriate local interconnect, preserving independent transport identities.
D:That option concerns transport vpn 0 default-route correctness. TLOC extension lets one router reach the peer-attached transport via an appropriate local interconnect, preserving independent transport identities.
Question 499
[Operations monitoring design] The engineer detects the following failed approach: Exporting only current online/offline device counts cannot establish when a voice SLA was violated. The original need remains: An NOC integration team is building validated management and reporting procedures. A customer wants an evidence-based weekly report of link loss, jitter, latency and impacted application periods. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Use Manager task/audit history and supported configuration or policy rollback with targeted post-change validation. Its usual validation would be: Compare active deployment version and task record before and after rollback, then test the affected application and control paths.
- Instead implement this other change: Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks. Its usual validation would be: Check image checksums/support, canary devices, upgrade task status, restored control/OMP/BFD peers and rollback readiness.
- Correct the design by doing the following: Define supported telemetry collection and reporting that preserves per-transport and application performance history. Then confirm success with this specific check: Generate the report for a defined week and reconcile tunnel/application metrics against known injected test impairment.
- Instead implement this other change: Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces. Its usual validation would be: Match event timestamps and transport loss across sites to the recorded maintenance activity and recovered states.
Explanation
Correct Answer
C:It restores the intended mechanism because Operational reporting must retain comparable measurements over time; a single current snapshot cannot prove a historical SLA trend.
Incorrect Answers
A:The alternative change addresses configuration-change audit and rollback where the separate requirement is A policy deployment breaks selected applications and the team needs to identify the operator, version and safe restoration step. It does not directly repair the present failure (Exporting only current online/offline device counts cannot establish when a voice SLA was violated.); the needed correction is Define supported telemetry collection and reporting that preserves per-transport and application performance history.
B:The alternative change addresses wan edge software image lifecycle where the separate requirement is The network team plans an approved phased Cisco IOS XE SD-WAN upgrade with low-risk rollback for hundreds of branch routers. It does not directly repair the present failure (Exporting only current online/offline device counts cannot establish when a voice SLA was violated.); the needed correction is Define supported telemetry collection and reporting that preserves per-transport and application performance history.
D:The alternative change addresses alarm and event correlation workflow where the separate requirement is A maintenance window produces repeated tunnel alarms and the operations team must identify their common triggering transport change.
Question 500
[Branch rollout regression] A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A WAN Edge changes its public transport address while remote sites keep referring to an obsolete tunnel endpoint. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Giving both circuits an unintended identical identity may erase the transport distinction that policy requires.
- A local OSPF route by itself does not guarantee that the remote WAN Edge receives the same destination through OMP.
- Using the Controller as the data-plane hub for ordinary branch payloads confuses control and forwarding responsibilities.
- Assuming a service-prefix reannouncement fixes an unreachable former transport address will not restore the tunnel.
Explanation
Correct Answer
D:This mistake undermines the intended tloc reachability after isp renumbering requirement. The supported correction is Update the supported underlay transport parameters, NAT reachability and resulting advertised TLOC state after ISP renumbering, and the independent evidence to seek is Compare observed transport local-properties and advertised TLOC details, then validate reestablished BFD and data traffic.
Incorrect Answers
A:That failure mode is primarily about tloc color and encapsulation on edge instead of this required tloc reachability after isp renumbering treatment.
B:That failure mode is primarily about omp advertisement of branch lan prefixes instead of this required tloc reachability after isp renumbering treatment.
C:That failure mode is primarily about regional hub wan edge placement instead of this required tloc reachability after isp renumbering treatment.