Cisco 300-415 Practice Test 34
Question 330
[Security and QoS acceptance test] The proposed action is: Evaluate supported packet duplication for the selected class when bandwidth cost and receiving behavior are acceptable. The requirement is: A network-security engineering team is evaluating enforcement before changing production service flows. A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Inspect output DSCP bits, matched QoS counters and measured quality under controlled cross traffic.
- Observe duplicate traffic across eligible transports and application packet delivery during selective path impairment.
- Trace matching application packets through inspection and verify return-path symmetry, security logs and unaffected exempt flows.
- Validate IPS engine state, applicable policy, signature currency and controlled detection logs while preserving authorized application flows.
Explanation
Correct Answer
B:Packet duplication sends redundant copies on different paths to mitigate individual-path loss at the cost of extra network traffic. This checks whether Evaluate supported packet duplication for the selected class when bandwidth cost and receiving behavior are acceptable. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
A:Those observations would be useful for dscp marking and class mapping, where the separate issue is: Branch traffic leaves the LAN with inconsistent priority markings and the transport class policy cannot identify voice reliably. They do not directly establish the present packet duplication for high-value traffic result.
C:Those observations would be useful for service insertion for external inspection, where the separate issue is: A regulated application must visit a regional inspection appliance before exiting the enterprise, even when normal OMP paths are shorter. They do not directly establish the present packet duplication for high-value traffic result.
D:Those observations would be useful for intrusion prevention inspection at branches, where the separate issue is: A branch security policy requires detection and prevention of exploit signatures in traffic that passes the supported security stack. They do not directly establish the present packet duplication for high-value traffic result.
Question 331
[SD-WAN architecture design review] The engineering recommendation is: Design supported Cloud OnRamp for IaaS connectivity and validated virtual edge or cloud interconnect integration for those workloads. The situation is: An enterprise WAN design board is assessing a planned topology before deploying new branches. Branch networks must reach workloads hosted in a public IaaS VPC/VNet through a planned SD-WAN attachment rather than ad hoc public routes. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?
- The SD-WAN Controller (formerly vSmart) runs the control plane and distributes OMP-derived routing and policy outcomes rather than carrying user packets.
- The Validator (formerly vBond) introduces authorized devices to the controller fabric and helps discover usable NAT traversal information; it is not the user-traffic forwarding device.
- Cloud OnRamp for IaaS integrates a cloud environment with SD-WAN overlay reachability so service routes and security stay controlled.
- The underlay provides IP connectivity among overlay endpoints, while the overlay controls protected service traffic and segmentation.
Explanation
Correct Answer
C:The practical discriminator is the validation step: Verify cloud attachment, service prefix exchange, and end-to-end protected forwarding between a branch and cloud workload. Cloud OnRamp for IaaS integrates a cloud environment with SD-WAN overlay reachability so service routes and security stay controlled.
Incorrect Answers
A:This is a rationale for sd-wan controller omp route distribution, under the different situation Two authorized edge sites establish control sessions but need overlay service prefixes and policy-selected next hops to be distributed consistently. It does not justify the specific proposed mechanism for cloud onramp for iaas access.
B:The Validator (formerly vBond) introduces authorized devices to the controller fabric and helps discover usable NAT traversal information; it is not the user-traffic forwarding device. This is a rationale for sd-wan validator orchestration and nat discovery, under the different situation A branch behind broadband NAT can reach public DNS, but it has not learned the controller addresses required to initiate its secure fabric connections. It does not justify the specific proposed mechanism for cloud onramp for iaas access. Cloud OnRamp for IaaS integrates a cloud environment with SD-WAN overlay reachability so service routes and security stay controlled.
D:This is a rationale for underlay and overlay path separation, under the different situation A branch advertises service routes correctly, but the ISP next-hop cannot reach the remote transport destination. Cloud OnRamp for IaaS integrates a cloud environment with SD-WAN overlay reachability so service routes and security stay controlled.
Question 332
[SD-WAN architecture design review] An enterprise WAN design board is assessing a planned topology before deploying new branches. An internet circuit remains physically up yet becomes lossy, and the service team needs tunnel-level evidence of forwarding quality. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Separate SaaS breakout path treatment from private IaaS Cloud OnRamp routing and apply policies to the appropriate traffic classes.
- Use a supported SD-WAN colocation/service insertion design with explicit service reachability and data-policy steering.
- Verify OMP adjacency with the Cisco SD-WAN Controllers and appropriate advertisement of service-side prefixes and transport locators.
- Use BFD session health and measured loss, latency, and jitter for the relevant overlay tunnels to evaluate path condition.
Explanation
Correct Answer
D:Bidirectional Forwarding Detection on SD-WAN data tunnels identifies reachability and supplies performance measurements that policies can consume. Evidence for this sd-wan architecture design review should include: Inspect the per-tunnel BFD state and performance metrics and correlate them with the affected application path.
Incorrect Answers
A:That option concerns direct internet versus cloud overlay access. Bidirectional Forwarding Detection on SD-WAN data tunnels identifies reachability and supplies performance measurements that policies can consume. Separate SaaS breakout path treatment from private IaaS Cloud OnRamp routing and apply policies to the appropriate traffic classes.
B:That option concerns cloud onramp colocation service chaining. Bidirectional Forwarding Detection on SD-WAN data tunnels identifies reachability and supplies performance measurements that policies can consume. That mechanism is chiefly relevant to a different cloud onramp colocation service chaining problem: A company centralizes security services in a colocation location and wants selected branch application flows routed through those services.
C:That option concerns sd-wan controller omp route distribution. Bidirectional Forwarding Detection on SD-WAN data tunnels identifies reachability and supplies performance measurements that policies can consume.
Question 333
[Branch rollout regression] A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes.
- Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport.
- Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP.
- Configure supported VRRP on the service-side interface with intended priorities and tracked failover behavior.
Explanation
Correct Answer
A:VPN 0 carries transport-side IP connectivity; service-VPN routes do not substitute for a usable controller/peer underlay path. Evidence for this branch rollout regression should include: Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
Incorrect Answers
B:That option concerns dual transport data-tunnel failover. VPN 0 carries transport-side IP connectivity; service-VPN routes do not substitute for a usable controller/peer underlay path.
C:That option concerns bgp service-side routing and redistribution. VPN 0 carries transport-side IP connectivity; service-VPN routes do not substitute for a usable controller/peer underlay path.
D:That option concerns branch vrrp gateway redundancy. VPN 0 carries transport-side IP connectivity; service-VPN routes do not substitute for a usable controller/peer underlay path. That mechanism is chiefly relevant to a different branch vrrp gateway redundancy problem: A branch LAN depends on one default gateway, and failure of its active WAN Edge should transfer gateway service to a standby edge.
Question 334
[Change and incident follow-up] The engineer detects the following failed approach: Hard-coding an interactive administrator's session cookie into an unattended monitoring job can break security and availability. The original need remains: A network operations group is auditing a production change or failure before closing its incident. A NOC dashboard must retrieve fabric inventory and tunnel health from Manager without screen scraping its web interface. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Handle HTTP errors, token renewal and result pagination explicitly, and reconcile returned device counts with expected inventory. Its usual validation would be: Force a token-expiry and paginated response test and confirm the job raises actionable errors instead of dropping devices.
- Correct the design by doing the following: Use supported authenticated Cisco SD-WAN Manager REST APIs with scoped credentials, bounded requests and response/error handling. Then confirm success with this specific check: Check API authentication, expected endpoint schema, pagination/rate limits and agreement with Manager inventory and telemetry.
- Instead implement this other change: Check the Cisco-supported interoperability matrix and upgrade sequencing before deploying version-dependent SD-WAN features. Its usual validation would be: Verify the release compatibility table, feature availability and successful controlled upgrade across representative devices.
- Instead implement this other change: Correlate Manager health dashboards with control peers, OMP routes, TLOC/BFD path state and affected service traffic. Its usual validation would be: Compare device inventory status, controller connections, tunnel metrics, service routes and a reproducible affected flow.
Explanation
Correct Answer
B:It restores the intended mechanism because Documented Manager APIs expose operational and management resources suitable for controlled integration; HTML scraping is brittle. This directly repairs the described failure: Hard-coding an interactive administrator's session cookie into an unattended monitoring job can break security and availability.
Incorrect Answers
A:The alternative change addresses rest api automation error handling where the separate requirement is A script reads device health from Manager but silently reports success when the API returns an expired token or incomplete response. It does not directly repair the present failure (Hard-coding an interactive administrator's session cookie into an unattended monitoring job can break security and availability.); the needed correction is Use supported authenticated Cisco SD-WAN Manager REST APIs with scoped credentials, bounded requests and response/error handling.
C:The alternative change addresses controller and edge version interoperability where the separate requirement is A new WAN Edge image adds features unavailable in the older management/control environment at one site. It does not directly repair the present failure (Hard-coding an interactive administrator's session cookie into an unattended monitoring job can break security and availability.); the needed correction is Use supported authenticated Cisco SD-WAN Manager REST APIs with scoped credentials, bounded requests and response/error handling.
D:The alternative change addresses sd-wan manager site-health dashboard triage where the separate requirement is The network team sees complaints from a specific branch and needs to distinguish transport impairment from a service VPN routing fault. It does not directly repair the present failure (Hard-coding an interactive administrator's session cookie into an unattended monitoring job can break security and availability.); the needed correction is Use supported authenticated Cisco SD-WAN Manager REST APIs with scoped credentials, bounded requests and response/error handling.
Question 335
[Branch rollout regression] The proposed action is: Configure supported transport color and encapsulation attributes per tunnel interface and validate the resulting TLOC advertisements. The requirement is: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. An engineer needs to advertise independent MPLS and broadband overlay attachments from the same branch system IP. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which observation provides the most direct success evidence?
- Observe device discovery, certificate authentication, assigned configuration, controller peering, and overlay tunnel formation after power-up.
- Inspect local service routing, advertised OMP prefixes, controller received routes and the remote installed service-VPN entry.
- Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
- Compare observed transport local-properties and advertised TLOC details, then validate reestablished BFD and data traffic.
Explanation
Correct Answer
C:TLOC identity includes system IP, transport color and encapsulation; correct classification allows policy and tunnel construction to distinguish paths. Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
Incorrect Answers
A:Those observations would be useful for wan edge zero-touch provisioning onboarding, where the separate issue is: A remote branch router is shipped to a site with no local SD-WAN engineer and must discover its authorized bootstrap and controller details. They do not directly establish the present tloc color and encapsulation on edge result.
B:Those observations would be useful for omp advertisement of branch lan prefixes, where the separate issue is: Two WAN Edge routers show established controller connections but one cannot reach the other site's advertised office subnet. They do not directly establish the present tloc color and encapsulation on edge result.
D:Those observations would be useful for tloc reachability after isp renumbering, where the separate issue is: A WAN Edge changes its public transport address while remote sites keep referring to an obsolete tunnel endpoint. The needed observation is: Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
Question 336
[Central policy design workshop] The proposed action is: Confirm the centralized policy is activated with correct direction and site-list match, then validate route distribution changes. The requirement is: A design team is specifying policy intent for distinct sites, transports and application classes. A network engineer defines a route-filtering policy but no sites change behavior after the design is saved in Manager. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Verify spoke route next hops, reachable hub TLOCs, and actual spoke-to-spoke traffic through the designated regional hub.
- Test both normal ERP steering over MPLS and automatic selection of permitted internet backup after MPLS BFD failure.
- Trace matched finance traffic and unmatched traffic, check active edge policy state, and verify intended forwarding outcomes.
- Inspect active policy state, site-list membership and before/after OMP route visibility at a representative edge.
Explanation
Correct Answer
D:Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes. This checks whether Confirm the centralized policy is activated with correct direction and site-list match, then validate route distribution changes. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
A:Those observations would be useful for hub-and-spoke topology by omp policy, where the separate issue is: A retail organization wants branch traffic between stores to traverse regional hubs instead of forming unconstrained direct paths. They do not directly establish the present controller policy application scope result.
B:Those observations would be useful for transport color eligibility for application policies, where the separate issue is: The design prefers private MPLS for ERP while allowing public internet only if the private tunnel becomes unusable. They do not directly establish the present controller policy application scope result.
C:Those observations would be useful for centralized data-policy traffic steering, where the separate issue is: An SD-WAN site must steer only finance application flows through a specified service path while all other business traffic uses defaults. They do not directly establish the present controller policy application scope result.
Question 337
[Policy-change production incident] A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. Only ten pilot branches should receive a new route distribution behavior, but a policy change affects the whole regional fabric. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Constrain centralized policy attachment to the correct site list and test membership before rollout.
- Validate the application classification or match criteria and the applied AAR policy before adjusting WAN interface routing.
- Build VPN-specific centralized policy and connectivity arrangements, validating each segment's desired topology independently.
- Implement the supported centralized control policy and TLOC/OMP route treatment that creates the required hub-and-spoke overlay topology.
Explanation
Correct Answer
A:The applied site list determines which edges are within a centralized policy's scope; prefix matching alone does not constrain the sites. Evidence for this policy-change production incident should include: Inspect the active policy definition and site-list entries, then compare route outcomes at pilot and non-pilot branches.
Incorrect Answers
B:That option concerns aar application classification accuracy. The applied site list determines which edges are within a centralized policy's scope; prefix matching alone does not constrain the sites. Validate the application classification or match criteria and the applied AAR policy before adjusting WAN interface routing.
C:That option concerns per-vpn hub topology. The applied site list determines which edges are within a centralized policy's scope; prefix matching alone does not constrain the sites. Build VPN-specific centralized policy and connectivity arrangements, validating each segment's desired topology independently.
D:That option concerns hub-and-spoke topology by omp policy. The applied site list determines which edges are within a centralized policy's scope; prefix matching alone does not constrain the sites.
Question 338
[Branch rollout regression] A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A WAN Edge learns two overlay paths for a remote service prefix but forwards unexpectedly after a transport outage. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Keeping all policies pinned to the failed MPLS color despite a healthy broadband tunnel prevents expected failover.
- Editing the local interface speed without checking OMP next-hop resolution can leave the original overlay choice unchanged.
- A local OSPF route by itself does not guarantee that the remote WAN Edge receives the same destination through OMP.
- Assuming EIGRP neighbors automatically form across the encrypted WAN overlay can bypass the intended service-side and OMP roles.
Explanation
Correct Answer
B:This mistake undermines the intended omp route preference and resolution requirement. Editing the local interface speed without checking OMP next-hop resolution can leave the original overlay choice unchanged.
Incorrect Answers
A:That failure mode is primarily about dual transport data-tunnel failover instead of this required omp route preference and resolution treatment.
C:That failure mode is primarily about omp advertisement of branch lan prefixes instead of this required omp route preference and resolution treatment. Its relevance would depend on Two WAN Edge routers show established controller connections but one cannot reach the other site's advertised office subnet.
D:That failure mode is primarily about eigrp branch lan compatibility instead of this required omp route preference and resolution treatment.
Question 339
[Change and incident follow-up] The engineering recommendation is: Configure supported role-based administrative permissions in Manager with the least privilege required for monitoring. The situation is: A network operations group is auditing a production change or failure before closing its incident. Help-desk staff need read-only visibility into WAN health without being allowed to modify centralized policy. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which technical rationale best supports that recommendation?
- Authentication validates identity; authorization limits capabilities. Operational access design needs both and controlled emergency recovery.
- Operational reporting must retain comparable measurements over time; a single current snapshot cannot prove a historical SLA trend.
- Management RBAC separates viewing and configuration capabilities so an operational role does not imply policy deployment authority.
- Temporal correlation of alerts with managed changes helps distinguish shared underlay failures from multiple independent configuration issues.
Explanation
Correct Answer
C:The practical discriminator is the validation step: Log in as a test monitoring user and verify dashboards work while configuration and activation actions are denied. That rationale matches the chosen action: Configure supported role-based administrative permissions in Manager with the least privilege required for monitoring.
Incorrect Answers
A:Authentication validates identity; authorization limits capabilities. Operational access design needs both and controlled emergency recovery. This is a rationale for authentication integration for manager users, under the different situation A security team wants predictable sign-in, authorization and account disablement for its SD-WAN Manager operators. It does not justify the specific proposed mechanism for role-based administration for operations. Management RBAC separates viewing and configuration capabilities so an operational role does not imply policy deployment authority.
B:Operational reporting must retain comparable measurements over time; a single current snapshot cannot prove a historical SLA trend. This is a rationale for network reporting baseline for sla breaches, under the different situation A customer wants an evidence-based weekly report of link loss, jitter, latency and impacted application periods. It does not justify the specific proposed mechanism for role-based administration for operations. Management RBAC separates viewing and configuration capabilities so an operational role does not imply policy deployment authority.
D:This is a rationale for alarm and event correlation workflow, under the different situation A maintenance window produces repeated tunnel alarms and the operations team must identify their common triggering transport change. Management RBAC separates viewing and configuration capabilities so an operational role does not imply policy deployment authority.
Question 340
[Change and incident follow-up] A network operations group is auditing a production change or failure before closing its incident. A maintenance window produces repeated tunnel alarms and the operations team must identify their common triggering transport change. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Factory resetting devices without analyzing policy change history may remove good configurations and expand the outage.
- Pushing an unverified image simultaneously to every edge before compatibility tests risks an enterprise-wide outage.
- Treating any nonempty JSON body as a successful complete inventory can hide authentication failures or missing pages.
- Treating every symptom alert as a separate root cause can mask a single provider outage.
Explanation
Correct Answer
D:This mistake undermines the intended alarm and event correlation workflow requirement. Treating every symptom alert as a separate root cause can mask a single provider outage.
Incorrect Answers
A:That failure mode is primarily about configuration-change audit and rollback instead of this required alarm and event correlation workflow treatment. Its relevance would depend on A policy deployment breaks selected applications and the team needs to identify the operator, version and safe restoration step.
B:That failure mode is primarily about wan edge software image lifecycle instead of this required alarm and event correlation workflow treatment.
C:That failure mode is primarily about rest api automation error handling instead of this required alarm and event correlation workflow treatment.