Cisco 300-415 Practice Test 23
Question 220
[Security and QoS acceptance test] The proposed action is: Use supported traffic shaping to buffer and pace eligible excess traffic to the intended egress rate while monitoring queue delay. The requirement is: A network-security engineering team is evaluating enforcement before changing production service flows. A provider circuit has a contracted rate, and the goal is to smooth bursts rather than discard avoidable packets immediately. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Verify selected traffic reaches the SIG cloud service, policy logs show inspection and internal service traffic remains on approved paths.
- Observe duplicate traffic across eligible transports and application packet delivery during selective path impairment.
- Generate known permitted and prohibited application traffic, inspect firewall hit logs and validate allow/deny outcomes.
- Generate representative bursts and observe shaped output rate, queue depth and application latency.
Explanation
Correct Answer
D:Shaping delays eligible burst traffic to conform to a configured rate; policing commonly drops or remarks traffic above its threshold. Generate representative bursts and observe shaped output rate, queue depth and application latency.
Incorrect Answers
A:Those observations would be useful for secure internet gateway breakout, where the separate issue is: An enterprise requires branch internet egress to use a cloud Secure Internet Gateway for policy enforcement and audit. They do not directly establish the present traffic shaping versus policing result.
B:Those observations would be useful for packet duplication for high-value traffic, where the separate issue is: A small, latency-sensitive flow requires greater delivery resilience over two independently usable transport paths. They do not directly establish the present traffic shaping versus policing result.
C:Those observations would be useful for application-aware enterprise firewall enforcement, where the separate issue is: An operations team needs to allow business applications but deny risky traffic based on recognized application identity at WAN Edges. They do not directly establish the present traffic shaping versus policing result.
Question 221
[SD-WAN architecture design review] The engineer detects the following failed approach: Calling dual circuits full edge redundancy overlooks the single device that terminates both transports. The original need remains: An enterprise WAN design board is assessing a planned topology before deploying new branches. A business-critical office has two ISPs but only one router, creating a remaining device failure domain. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Correct the design by doing the following: Evaluate redundant WAN Edge devices and route/service-side failover in addition to dual transport links when the availability goal requires it. Then confirm success with this specific check: Test WAN Edge outage and the intended gateway/route recovery, not merely individual link shutdown events.
- Instead implement this other change: Configure reachable SD-WAN Validator discovery and verify the branch can establish its initial authenticated orchestration connection. Its usual validation would be: Confirm initial Validator control connectivity and discovery of Manager and Controller addresses along with the observed NAT mapping at the branch.
- Instead implement this other change: Verify OMP adjacency with the Cisco SD-WAN Controllers and appropriate advertisement of service-side prefixes and transport locators. Its usual validation would be: Inspect OMP peers, received routes, TLOC resolution, and the installed service-VPN route at the receiving edge.
- Instead implement this other change: Use Cisco SD-WAN Manager for configuration administration, monitoring, and operational workflows, leaving user traffic to the WAN Edge data plane. Its usual validation would be: Verify device inventory, successful configuration tasks, and operational telemetry in Manager while branch-to-branch packets take edge tunnels.
Explanation
Correct Answer
A:It restores the intended mechanism because Two circuits on one WAN Edge reduce circuit failure risk but do not eliminate a single-router outage.
Incorrect Answers
B:The alternative change addresses sd-wan validator orchestration and nat discovery where the separate requirement is A branch behind broadband NAT can reach public DNS, but it has not learned the controller addresses required to initiate its secure fabric connections. It does not directly repair the present failure (Calling dual circuits full edge redundancy overlooks the single device that terminates both transports.); the needed correction is Evaluate redundant WAN Edge devices and route/service-side failover in addition to dual transport links when the availability goal requires it.
C:The alternative change addresses sd-wan controller omp route distribution where the separate requirement is Two authorized edge sites establish control sessions but need overlay service prefixes and policy-selected next hops to be distributed consistently. It does not directly repair the present failure (Calling dual circuits full edge redundancy overlooks the single device that terminates both transports.); the needed correction is Evaluate redundant WAN Edge devices and route/service-side failover in addition to dual transport links when the availability goal requires it.
D:The alternative change addresses sd-wan manager management-plane ownership where the separate requirement is Operations needs one platform to push centralized configuration and review fabric health without forwarding branch application packets through that platform.
Question 222
[Policy-change production incident] A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. Guest user traffic must never reach payment subnet routes, even though both groups share the same physical internet underlay. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Advertising the destination but never steering the matching flow into the service node defeats required inspection.
- Using only distinct VLAN names without maintaining SD-WAN service-VPN boundaries can permit unintended cross-segment routes.
- Applying a broad centralized site list for a one-off local rule risks changing other offices' traffic.
- Applying one hub-only policy to every service VPN can defeat the required direct guest egress behavior.
Explanation
Correct Answer
B:This mistake undermines the intended service-vpn segmentation boundaries requirement. Using only distinct VLAN names without maintaining SD-WAN service-VPN boundaries can permit unintended cross-segment routes.
Incorrect Answers
A:That failure mode is primarily about service insertion path selection instead of this required service-vpn segmentation boundaries treatment. Its relevance would depend on Selected finance traffic must be inspected by an approved firewall service at a regional hub before reaching its destination.
C:That failure mode is primarily about localized data-policy enforcement instead of this required service-vpn segmentation boundaries treatment.
D:That failure mode is primarily about per-vpn hub topology instead of this required service-vpn segmentation boundaries treatment.
Question 223
[Change and incident follow-up] The engineer detects the following failed approach: Pushing an unverified image simultaneously to every edge before compatibility tests risks an enterprise-wide outage. The original need remains: A network operations group is auditing a production change or failure before closing its incident. The network team plans an approved phased Cisco IOS XE SD-WAN upgrade with low-risk rollback for hundreds of branch routers. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces. Its usual validation would be: Match event timestamps and transport loss across sites to the recorded maintenance activity and recovered states.
- Instead implement this other change: Use Manager task/audit history and supported configuration or policy rollback with targeted post-change validation. Its usual validation would be: Compare active deployment version and task record before and after rollback, then test the affected application and control paths.
- Correct the design by doing the following: Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks. Then confirm success with this specific check: Check image checksums/support, canary devices, upgrade task status, restored control/OMP/BFD peers and rollback readiness.
- Instead implement this other change: Handle HTTP errors, token renewal and result pagination explicitly, and reconcile returned device counts with expected inventory. Its usual validation would be: Force a token-expiry and paginated response test and confirm the job raises actionable errors instead of dropping devices.
Explanation
Correct Answer
C:It restores the intended mechanism because Central image lifecycle management supports controlled version distribution, upgrade tasks and verification; upgrade safety needs platform and release validation.
Incorrect Answers
A:The alternative change addresses alarm and event correlation workflow where the separate requirement is A maintenance window produces repeated tunnel alarms and the operations team must identify their common triggering transport change. It does not directly repair the present failure (Pushing an unverified image simultaneously to every edge before compatibility tests risks an enterprise-wide outage.); the needed correction is Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks.
B:The alternative change addresses configuration-change audit and rollback where the separate requirement is A policy deployment breaks selected applications and the team needs to identify the operator, version and safe restoration step. It does not directly repair the present failure (Pushing an unverified image simultaneously to every edge before compatibility tests risks an enterprise-wide outage.); the needed correction is Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks.
D:The alternative change addresses rest api automation error handling where the separate requirement is A script reads device health from Manager but silently reports success when the API returns an expired token or incomplete response. It does not directly repair the present failure (Pushing an unverified image simultaneously to every edge before compatibility tests risks an enterprise-wide outage.); the needed correction is Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks.
Question 224
[New branch commissioning] A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Running OSPF only on the WAN transport interface does not accomplish the requested service-VPN LAN prefix exchange.
- Relying only on dual ISP links behind a failed gateway router will not maintain the LAN virtual-gateway function.
- Keeping all policies pinned to the failed MPLS color despite a healthy broadband tunnel prevents expected failover.
- Adding a route only under a service VPN does not fix missing transport-side connectivity in VPN 0.
Explanation
Correct Answer
D:The supported correction is Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes, and the independent evidence to seek is Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction. This mistake undermines the intended transport vpn 0 default-route correctness requirement.
Incorrect Answers
A:That failure mode is primarily about ospf service vpn adjacency instead of this required transport vpn 0 default-route correctness treatment.
B:That failure mode is primarily about branch vrrp gateway redundancy instead of this required transport vpn 0 default-route correctness treatment. Its relevance would depend on A branch LAN depends on one default gateway, and failure of its active WAN Edge should transfer gateway service to a standby edge.
C:That failure mode is primarily about dual transport data-tunnel failover instead of this required transport vpn 0 default-route correctness treatment.
Question 225
[Operations monitoring design] The engineer detects the following failed approach: Treating every symptom alert as a separate root cause can mask a single provider outage. The original need remains: An NOC integration team is building validated management and reporting procedures. A maintenance window produces repeated tunnel alarms and the operations team must identify their common triggering transport change. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Correct the design by doing the following: Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces. Then confirm success with this specific check: Match event timestamps and transport loss across sites to the recorded maintenance activity and recovered states.
- Instead implement this other change: Check the Cisco-supported interoperability matrix and upgrade sequencing before deploying version-dependent SD-WAN features. Its usual validation would be: Verify the release compatibility table, feature availability and successful controlled upgrade across representative devices.
- Instead implement this other change: Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks. Its usual validation would be: Check image checksums/support, canary devices, upgrade task status, restored control/OMP/BFD peers and rollback readiness.
- Instead implement this other change: Configure supported centralized user authentication and RBAC integration, then validate user lifecycle and fallback procedures. Its usual validation would be: Test valid login, disabled user rejection, group-to-role mapping, session handling and documented break-glass access.
Explanation
Correct Answer
A:It restores the intended mechanism because Temporal correlation of alerts with managed changes helps distinguish shared underlay failures from multiple independent configuration issues. This directly repairs the described failure: Treating every symptom alert as a separate root cause can mask a single provider outage.
Incorrect Answers
B:The alternative change addresses controller and edge version interoperability where the separate requirement is A new WAN Edge image adds features unavailable in the older management/control environment at one site. It does not directly repair the present failure (Treating every symptom alert as a separate root cause can mask a single provider outage.); the needed correction is Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces.
C:The alternative change addresses wan edge software image lifecycle where the separate requirement is The network team plans an approved phased Cisco IOS XE SD-WAN upgrade with low-risk rollback for hundreds of branch routers. It does not directly repair the present failure (Treating every symptom alert as a separate root cause can mask a single provider outage.); the needed correction is Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces.
D:The alternative change addresses authentication integration for manager users where the separate requirement is A security team wants predictable sign-in, authorization and account disablement for its SD-WAN Manager operators. It does not directly repair the present failure (Treating every symptom alert as a separate root cause can mask a single provider outage.); the needed correction is Review Manager alarm timelines and device events with change logs, correlating affected sites and transport interfaces.
Question 226
[Policy-change production incident] A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. A network engineer defines a route-filtering policy but no sites change behavior after the design is saved in Manager. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which supported action best addresses this requirement?
- Validate the application classification or match criteria and the applied AAR policy before adjusting WAN interface routing.
- Confirm the centralized policy is activated with correct direction and site-list match, then validate route distribution changes.
- Order supported data-policy sequences from specific intended matches toward an appropriate default and validate effective evaluation behavior.
- Apply a supported centralized data policy matching application or destination traffic and steering it to a permitted transport or service.
Explanation
Correct Answer
B:Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes. Evidence for this policy-change production incident should include: Inspect active policy state, site-list membership and before/after OMP route visibility at a representative edge.
Incorrect Answers
A:That option concerns aar application classification accuracy. Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes.
C:That option concerns data-policy sequence ordering. Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes.
D:That option concerns centralized data-policy traffic steering. Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes.
Question 227
[Branch rollout regression] The engineer detects the following failed approach: Adding a route only under a service VPN does not fix missing transport-side connectivity in VPN 0. The original need remains: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP. Its usual validation would be: Inspect BGP neighbor state and selected prefixes, OMP advertised routes and remote received routes for only intended subnets.
- Instead implement this other change: Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport. Its usual validation would be: Disable the MPLS link in a test and verify BFD transition, expected alternate path selection and transaction continuity.
- Correct the design by doing the following: Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes. Then confirm success with this specific check: Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
- Instead implement this other change: Configure OSPF within the intended service VPN and explicitly validate route exchange/advertisement into OMP as required. Its usual validation would be: Check OSPF neighbors, local RIB entries, OMP advertisements and the receiving remote edge's service route.
Explanation
Correct Answer
C:It restores the intended mechanism because VPN 0 carries transport-side IP connectivity; service-VPN routes do not substitute for a usable controller/peer underlay path.
Incorrect Answers
A:The alternative change addresses bgp service-side routing and redistribution where the separate requirement is A data center edge learns enterprise prefixes from a customer BGP neighbor and must publish only authorized destinations into the fabric. It does not directly repair the present failure (Adding a route only under a service VPN does not fix missing transport-side connectivity in VPN 0.); the needed correction is Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes.
B:The alternative change addresses dual transport data-tunnel failover where the separate requirement is A branch has MPLS and broadband tunnels; the MPLS physical link fails during a payment transaction. It does not directly repair the present failure (Adding a route only under a service VPN does not fix missing transport-side connectivity in VPN 0.); the needed correction is Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes.
D:The alternative change addresses ospf service vpn adjacency where the separate requirement is A branch Layer 3 switch speaks OSPF to a WAN Edge, and its learned LAN routes need to participate in the SD-WAN overlay. It does not directly repair the present failure (Adding a route only under a service VPN does not fix missing transport-side connectivity in VPN 0.); the needed correction is Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes.
Question 228
[Post-migration operational investigation] An operations team is reviewing an observed production overlay issue after migration from legacy WAN. A branch advertises service routes correctly, but the ISP next-hop cannot reach the remote transport destination. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- A learned service prefix with no resolvable active TLOC does not by itself prove that a data tunnel can carry traffic.
- Applying the same assumed color semantics without verifying interface-to-circuit mapping can steer traffic onto an unintended WAN.
- Equating underlay interface link-up with healthy overlay BFD sessions can conceal a tunnel brownout.
- Adding more OMP service prefixes cannot repair a missing IP path to the peer transport address.
Explanation
Correct Answer
D:The supported correction is Repair underlay transport reachability independently of the OMP overlay route distribution and recheck the resulting tunnel state, and the independent evidence to seek is Confirm transport interface routes and controller reachability first, then check established TLOC/BFD sessions and service traffic. This mistake undermines the intended underlay and overlay path separation requirement.
Incorrect Answers
A:That failure mode is primarily about omp vroute versus transport location instead of this required underlay and overlay path separation treatment.
B:That failure mode is primarily about transport colors identify circuits instead of this required underlay and overlay path separation treatment. Its relevance would depend on A branch has MPLS and public internet interfaces and operations need consistent transport identity for tunnel creation and policy.
C:That failure mode is primarily about bfd overlay tunnel health instead of this required underlay and overlay path separation treatment.
Question 229
[Central policy design workshop] A design team is specifying policy intent for distinct sites, transports and application classes. An SD-WAN site must steer only finance application flows through a specified service path while all other business traffic uses defaults. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Apply a supported centralized data policy matching application or destination traffic and steering it to a permitted transport or service.
- Create and apply a centralized control policy matching permitted site and prefix sets, then confirm its OMP advertisement results.
- Implement a supported DIA routing and NAT/security policy for guest traffic at the branch and verify service-side matching.
- Use an appropriate centralized control policy match and supported OMP preference or TLOC modification for the target sites and prefixes.
Explanation
Correct Answer
A:Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution. Evidence for this central policy design workshop should include: Trace matched finance traffic and unmatched traffic, check active edge policy state, and verify intended forwarding outcomes.
Incorrect Answers
B:That option concerns centralized control-policy route filtering. Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
C:That option concerns direct internet access policy and nat. Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
D:That option concerns omp path preference per region. Centralized data policy governs packet handling at WAN Edges; it operates differently from control policy that changes OMP distribution.
Question 230
[Branch rollout regression] The proposed action is: Use a supported CLI add-on profile within the appropriate configuration workflow, validating command compatibility and precedence. The requirement is: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A current feature profile covers almost every site option but the approved design requires an additional supported CLI command not exposed in that profile. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which observation provides the most direct success evidence?
- Compare observed transport local-properties and advertised TLOC details, then validate reestablished BFD and data traffic.
- Preview resulting device configuration and confirm the additional command applies without conflicting with profile-managed settings.
- Check the inter-router extension link, local TLOC details, transport IP reachability and BFD tunnels over the extended path.
- Check EIGRP neighbors, local route installation, selective route advertisement into OMP and remote reachability.
Explanation
Correct Answer
B:A CLI add-on can extend profile-managed devices with required supported commands, subject to release and configuration restrictions. Preview resulting device configuration and confirm the additional command applies without conflicting with profile-managed settings.
Incorrect Answers
A:Those observations would be useful for tloc reachability after isp renumbering, where the separate issue is: A WAN Edge changes its public transport address while remote sites keep referring to an obsolete tunnel endpoint. They do not directly establish the present cli add-on for unsupported profile element result.
C:Those observations would be useful for tloc extension across dual branch routers, where the separate issue is: One WAN Edge needs to use a transport circuit physically attached to the adjacent WAN Edge at the same branch. They do not directly establish the present cli add-on for unsupported profile element result.
D:Those observations would be useful for eigrp branch lan compatibility, where the separate issue is: A legacy enterprise distribution network uses EIGRP while a new Cisco IOS XE SD-WAN Edge must learn its routes without replacing the LAN protocol. They do not directly establish the present cli add-on for unsupported profile element result.