Cisco 300-415 Practice Test 11
Question 100
[Branch rollout regression] The engineer detects the following failed approach: Assuming a service-prefix reannouncement fixes an unreachable former transport address will not restore the tunnel. The original need remains: A network engineer is repairing a specific behavior observed after a controlled WAN Edge rollout. A WAN Edge changes its public transport address while remote sites keep referring to an obsolete tunnel endpoint. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. What is the best controlled recovery plan?
- Instead implement this other change: Ensure a usable alternate TLOC/BFD path exists and traffic policy permits failover to the surviving transport. Its usual validation would be: Disable the MPLS link in a test and verify BFD transition, expected alternate path selection and transaction continuity.
- Instead implement this other change: Deploy a supported regional WAN Edge hub with service reachability, transport TLOCs, and route/policy design for the targeted branches. Its usual validation would be: Verify hub service prefixes, branch OMP reachability, tunnel health, and actual branch-to-hub application forwarding.
- Instead implement this other change: Configure supported transport color and encapsulation attributes per tunnel interface and validate the resulting TLOC advertisements. Its usual validation would be: Confirm both local TLOC records, received TLOC routes and BFD tunnel states by transport color.
- Correct the design by doing the following: Update the supported underlay transport parameters, NAT reachability and resulting advertised TLOC state after ISP renumbering. Then confirm success with this specific check: Compare observed transport local-properties and advertised TLOC details, then validate reestablished BFD and data traffic.
Explanation
Correct Answer
D:It restores the intended mechanism because Overlay peers rely on current advertised and reachable transport endpoints; stale reachability can leave control routes present but tunnels down. This directly repairs the described failure: Assuming a service-prefix reannouncement fixes an unreachable former transport address will not restore the tunnel.
Incorrect Answers
A:The alternative change addresses dual transport data-tunnel failover where the separate requirement is A branch has MPLS and broadband tunnels; the MPLS physical link fails during a payment transaction. It does not directly repair the present failure (Assuming a service-prefix reannouncement fixes an unreachable former transport address will not restore the tunnel.); the needed correction is Update the supported underlay transport parameters, NAT reachability and resulting advertised TLOC state after ISP renumbering.
B:The alternative change addresses regional hub wan edge placement where the separate requirement is Several branches require deterministic access to a regional hub for shared services, while overlay edge policy must remain centrally manageable. It does not directly repair the present failure (Assuming a service-prefix reannouncement fixes an unreachable former transport address will not restore the tunnel.); the needed correction is Update the supported underlay transport parameters, NAT reachability and resulting advertised TLOC state after ISP renumbering.
C:The alternative change addresses tloc color and encapsulation on edge where the separate requirement is An engineer needs to advertise independent MPLS and broadband overlay attachments from the same branch system IP. It does not directly repair the present failure (Assuming a service-prefix reannouncement fixes an unreachable former transport address will not restore the tunnel.); the needed correction is Update the supported underlay transport parameters, NAT reachability and resulting advertised TLOC state after ISP renumbering.
Question 101
[Controller deployment acceptance] The proposed action is: Import and synchronize the correctly identified WAN Edge into the authorized device inventory and confirm ownership approval. The requirement is: A platform team is validating control component readiness during staged site onboarding. A hardware edge has a valid identity certificate yet is absent from the authorized device inventory and is rejected by fabric admission. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Review the device's chassis/serial identity in the Manager authorized list and observe successful controller authorization.
- Compare allowed transport flows and control connection logs before and after narrow firewall policy remediation.
- Stop one controller in a controlled test and confirm surviving control peers and continued advertised OMP reachability.
- Compare organization names in controller and edge configurations and confirm authenticated peering after correction.
Explanation
Correct Answer
A:The authorized device list defines what devices the control fabric permits; a certificate by itself does not grant enrollment. This checks whether Import and synchronize the correctly identified WAN Edge into the authorized device inventory and confirm ownership approval. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
B:Those observations would be useful for underlay control firewall restrictions, where the separate issue is: Several branches can resolve the controller name but their DTLS/TLS control attempts consistently time out at a perimeter firewall. They do not directly establish the present authorized device list onboarding result.
C:Those observations would be useful for high availability for control components, where the separate issue is: The enterprise has one SD-WAN Controller and wants service continuity through a single planned controller-host maintenance event. They do not directly establish the present authorized device list onboarding result.
D:Those observations would be useful for controller organization-name consistency, where the separate issue is: A newly deployed controller repeatedly fails to form expected peer control connections although network transport is reachable. They do not directly establish the present authorized device list onboarding result.
Question 102
[Change and incident follow-up] A network operations group is auditing a production change or failure before closing its incident. The network team plans an approved phased Cisco IOS XE SD-WAN upgrade with low-risk rollback for hundreds of branch routers. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Treating any nonempty JSON body as a successful complete inventory can hide authentication failures or missing pages.
- Pushing an unverified image simultaneously to every edge before compatibility tests risks an enterprise-wide outage.
- Exporting only current online/offline device counts cannot establish when a voice SLA was violated.
- Factory resetting devices without analyzing policy change history may remove good configurations and expand the outage.
Explanation
Correct Answer
B:The supported correction is Stage supported software images using Manager image management, confirm compatibility and schedule canary rollout with health checks, and the independent evidence to seek is Check image checksums/support, canary devices, upgrade task status, restored control/OMP/BFD peers and rollback readiness. This mistake undermines the intended wan edge software image lifecycle requirement.
Incorrect Answers
A:That failure mode is primarily about rest api automation error handling instead of this required wan edge software image lifecycle treatment.
C:That failure mode is primarily about network reporting baseline for sla breaches instead of this required wan edge software image lifecycle treatment.
D:That failure mode is primarily about configuration-change audit and rollback instead of this required wan edge software image lifecycle treatment.
Question 103
[Central policy design workshop] A design team is specifying policy intent for distinct sites, transports and application classes. A network engineer defines a route-filtering policy but no sites change behavior after the design is saved in Manager. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Define application or data-policy path eligibility and preference using the correct TLOC transport color lists and failover behavior.
- Use an appropriate centralized control policy match and supported OMP preference or TLOC modification for the target sites and prefixes.
- Confirm the centralized policy is activated with correct direction and site-list match, then validate route distribution changes.
- Implement the supported centralized control policy and TLOC/OMP route treatment that creates the required hub-and-spoke overlay topology.
Explanation
Correct Answer
C:Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes. Evidence for this central policy design workshop should include: Inspect active policy state, site-list membership and before/after OMP route visibility at a representative edge.
Incorrect Answers
A:That option concerns transport color eligibility for application policies. Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes.
B:That option concerns omp path preference per region. Defining a policy object without activating or applying it at the right scope does not modify OMP advertisement outcomes.
D:That option concerns hub-and-spoke topology by omp policy, not the requirement in this case.
Question 104
[SD-WAN architecture design review] An enterprise WAN design board is assessing a planned topology before deploying new branches. A branch has MPLS and public internet interfaces and operations need consistent transport identity for tunnel creation and policy. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which design or operational mistake would most directly defeat the intended outcome?
- Relying on only underlay routing to exchange service-VPN site prefixes bypasses the OMP overlay control function.
- Giving different routers identical system IP values creates identity conflict even when their site IDs are correct.
- Adding more OMP service prefixes cannot repair a missing IP path to the peer transport address.
- Applying the same assumed color semantics without verifying interface-to-circuit mapping can steer traffic onto an unintended WAN.
Explanation
Correct Answer
D:The supported correction is Assign and validate the supported SD-WAN transport colors for the intended WAN interfaces, while maintaining independent underlay IP reachability, and the independent evidence to seek is Inspect TLOC color tags and established tunnels per interface; check that policy selects the desired transport type. This mistake undermines the intended transport colors identify circuits requirement.
Incorrect Answers
A:That failure mode is primarily about sd-wan controller omp route distribution instead of this required transport colors identify circuits treatment. Its relevance would depend on Two authorized edge sites establish control sessions but need overlay service prefixes and policy-selected next hops to be distributed consistently.
B:That failure mode is primarily about site id and system ip identity instead of this required transport colors identify circuits treatment. Its relevance would depend on A control-plane design uses multiple routers per site and must distinguish edge identity from site-membership behavior.
C:That failure mode is primarily about underlay and overlay path separation instead of this required transport colors identify circuits treatment.
Question 105
[SD-WAN architecture design review] The engineering recommendation is: Configure reachable SD-WAN Validator discovery and verify the branch can establish its initial authenticated orchestration connection. The situation is: An enterprise WAN design board is assessing a planned topology before deploying new branches. A branch behind broadband NAT can reach public DNS, but it has not learned the controller addresses required to initiate its secure fabric connections. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which technical rationale best supports that recommendation?
- The Validator (formerly vBond) introduces authorized devices to the controller fabric and helps discover usable NAT traversal information; it is not the user-traffic forwarding device.
- Two circuits on one WAN Edge reduce circuit failure risk but do not eliminate a single-router outage.
- Cisco SD-WAN Edge capability depends on the platform and its release; a cloud VM does not create equivalent physical port capacity.
- Colocation integration is a fabric service-delivery pattern; forwarding to service resources must be enabled by routes and policy.
Explanation
Correct Answer
A:The practical discriminator is the validation step: Confirm initial Validator control connectivity and discovery of Manager and Controller addresses along with the observed NAT mapping at the branch. That rationale matches the chosen action: Configure reachable SD-WAN Validator discovery and verify the branch can establish its initial authenticated orchestration connection.
Incorrect Answers
B:This is a rationale for wan edge redundancy at a branch, under the different situation A business-critical office has two ISPs but only one router, creating a remaining device failure domain. The Validator (formerly vBond) introduces authorized devices to the controller fabric and helps discover usable NAT traversal information; it is not the user-traffic forwarding device.
C:This is a rationale for physical versus virtual wan edge placement, under the different situation A remote office has a hardware appliance while a cloud transit design needs a supported software router workload. The Validator (formerly vBond) introduces authorized devices to the controller fabric and helps discover usable NAT traversal information; it is not the user-traffic forwarding device.
D:Colocation integration is a fabric service-delivery pattern; forwarding to service resources must be enabled by routes and policy. This is a rationale for cloud onramp colocation service chaining, under the different situation A company centralizes security services in a colocation location and wants selected branch application flows routed through those services. It does not justify the specific proposed mechanism for sd-wan validator orchestration and nat discovery. The Validator (formerly vBond) introduces authorized devices to the controller fabric and helps discover usable NAT traversal information; it is not the user-traffic forwarding device.
Question 106
[Policy-change production incident] A change manager is isolating the side effect of an active policy without weakening unrelated segmentation. An SD-WAN site must steer only finance application flows through a specified service path while all other business traffic uses defaults. The fix must preserve unrelated security, transport and service-VPN behavior and be confirmed by observable evidence. Which design or operational mistake would most directly defeat the intended outcome?
- Assuming a saved draft policy always takes effect on every branch leads to a false change-success report.
- Using a route-advertisement filter alone cannot necessarily classify and steer only the targeted finance flow.
- Applying a broad centralized site list for a one-off local rule risks changing other offices' traffic.
- Using an overbroad site list turns a narrow pilot into an unintended enterprise-wide route-control change.
Explanation
Correct Answer
B:This mistake undermines the intended centralized data-policy traffic steering requirement. Using a route-advertisement filter alone cannot necessarily classify and steer only the targeted finance flow.
Incorrect Answers
A:That failure mode is primarily about controller policy application scope instead of this required centralized data-policy traffic steering treatment.
C:That failure mode is primarily about localized data-policy enforcement instead of this required centralized data-policy traffic steering treatment.
D:That failure mode is primarily about site-list targeting in centralized policy instead of this required centralized data-policy traffic steering treatment. Its relevance would depend on Only ten pilot branches should receive a new route distribution behavior, but a policy change affects the whole regional fabric.
Question 107
[New branch commissioning] The proposed action is: Use supported SD-WAN Manager configuration groups with reusable feature profiles and device-specific values where needed. The requirement is: A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. Dozens of WAN Edges share transport settings but retain per-site IP addresses and service-VPN differences under current Manager workflows. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which observation provides the most direct success evidence?
- Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
- Observe device discovery, certificate authentication, assigned configuration, controller peering, and overlay tunnel formation after power-up.
- Inspect group membership, feature profile bindings, per-device values and successful deployment results across sample sites.
- Verify boot-time system settings, controller reachability, accepted identity, and successful enrollment using the bootstrap path.
Explanation
Correct Answer
C:Configuration groups and profiles reduce drift while preserving intended per-device variables; they are not equivalent to a single identical CLI file. This checks whether Use supported SD-WAN Manager configuration groups with reusable feature profiles and device-specific values where needed. achieved the target state rather than merely confirming a related configuration exists.
Incorrect Answers
A:Those observations would be useful for transport vpn 0 default-route correctness, where the separate issue is: An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. They do not directly establish the present configuration groups reusable feature profiles result.
B:Those observations would be useful for wan edge zero-touch provisioning onboarding, where the separate issue is: A remote branch router is shipped to a site with no local SD-WAN engineer and must discover its authorized bootstrap and controller details. They do not directly establish the present configuration groups reusable feature profiles result.
D:Those observations would be useful for offline bootstrap for restricted wan edges, where the separate issue is: A site cannot access the normal public onboarding service during commissioning and must join a privately hosted SD-WAN fabric. They do not directly establish the present configuration groups reusable feature profiles result.
Question 108
[New branch commissioning] The engineer detects the following failed approach: Blindly injecting every BGP prefix into the overlay risks unauthorized reachability and unexpected routing loops. The original need remains: A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. A data center edge learns enterprise prefixes from a customer BGP neighbor and must publish only authorized destinations into the fabric. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Instead implement this other change: Repair VPN 0 transport routing, correct ISP next hop and proper tunnel interface configuration before attempting overlay fixes. Its usual validation would be: Test transport VPN 0 routing and controller reachability, then inspect the control and BFD sessions after correction.
- Instead implement this other change: Plan supported multicast mechanisms, service-side joins and overlay replication or forwarding behavior for the exact Cisco SD-WAN version. Its usual validation would be: Verify multicast group joins, traffic replication/arrival at intended branches, and absence of delivery at unapproved sites.
- Instead implement this other change: Stage the WAN Edge with transport and service routing, validate coexistence and migration boundaries, then shift traffic in a controlled pilot. Its usual validation would be: Validate route tables and end-to-end flows before, during, and after cutover, including a tested rollback path.
- Correct the design by doing the following: Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP. Then confirm success with this specific check: Inspect BGP neighbor state and selected prefixes, OMP advertised routes and remote received routes for only intended subnets.
Explanation
Correct Answer
D:It restores the intended mechanism because BGP serves the attached enterprise network; OMP distribution requires a deliberate route import/export design and filters.
Incorrect Answers
A:The alternative change addresses transport vpn 0 default-route correctness where the separate requirement is An internet-connected WAN Edge shows a configured service VPN but cannot reach the Validator IP over its underlay. It does not directly repair the present failure (Blindly injecting every BGP prefix into the overlay risks unauthorized reachability and unexpected routing loops.); the needed correction is Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP.
B:The alternative change addresses multicast support and routing design where the separate requirement is A manufacturing site sends one-to-many streams to remote branches and the WAN design must support the multicast routing behavior of the deployed release. It does not directly repair the present failure (Blindly injecting every BGP prefix into the overlay risks unauthorized reachability and unexpected routing loops.); the needed correction is Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP.
C:The alternative change addresses branch migration from traditional wan where the separate requirement is An enterprise is moving one pilot office from static hub VPNs to Cisco SD-WAN without disrupting access to unchanged legacy sites. It does not directly repair the present failure (Blindly injecting every BGP prefix into the overlay risks unauthorized reachability and unexpected routing loops.); the needed correction is Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP.
Question 109
[Security and QoS acceptance test] The engineer detects the following failed approach: Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover. The original need remains: A network-security engineering team is evaluating enforcement before changing production service flows. A dual-transport branch needs QoS treatment that accounts for separate overlay tunnels and variable available link capacity. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. What is the best controlled recovery plan?
- Correct the design by doing the following: Evaluate supported per-tunnel or adaptive QoS configuration and confirm treatment on each eligible WAN Edge path. Then confirm success with this specific check: Inspect per-tunnel QoS statistics and performance under changed transport conditions, including path failover.
- Instead implement this other change: Classify voice traffic and apply supported queuing/scheduling behavior with appropriate guaranteed or strict-priority treatment. Its usual validation would be: Under controlled congestion, inspect voice queue statistics, offered load, drops, jitter and backup treatment.
- Instead implement this other change: Evaluate supported forward error correction for the eligible SD-WAN data path and balance recovered loss against added overhead. Its usual validation would be: Measure application loss and bandwidth overhead before and after enabling FEC under repeatable link impairment.
- Instead implement this other change: Configure supported SIG integration and data steering for the intended internet destinations while preserving private service routes. Its usual validation would be: Verify selected traffic reaches the SIG cloud service, policy logs show inspection and internal service traffic remains on approved paths.
Explanation
Correct Answer
A:It restores the intended mechanism because Different tunnels may have different capacity and congestion behavior; tunnel-aware QoS must map classes and capacity according to supported capabilities. This directly repairs the described failure: Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover.
Incorrect Answers
B:The alternative change addresses qos scheduling for real-time traffic where the separate requirement is Interactive voice frames compete with bulk backups on a constrained WAN circuit and need controlled service under congestion. It does not directly repair the present failure (Applying a single fixed aggregate QoS assumption to a variable collection of tunnels can starve priority traffic after failover.); the needed correction is Evaluate supported per-tunnel or adaptive QoS configuration and confirm treatment on each eligible WAN Edge path.
C:The alternative change addresses forward error correction for lossy links where the separate requirement is A real-time application suffers recoverable packet loss on a busy link but cannot tolerate repeated retransmission delay.
D:The alternative change addresses secure internet gateway breakout where the separate requirement is An enterprise requires branch internet egress to use a cloud Secure Internet Gateway for policy enforcement and audit.
Question 110
[New branch commissioning] A deployment engineer is preparing a validated branch or regional hub configuration before acceptance. A branch Layer 3 switch speaks OSPF to a WAN Edge, and its learned LAN routes need to participate in the SD-WAN overlay. Choose the mechanism that actually addresses the stated condition, not a merely adjacent SD-WAN feature. Which supported action best addresses this requirement?
- Establish service-VPN BGP peerings and tightly control which learned prefixes are redistributed or advertised into OMP.
- Configure OSPF within the intended service VPN and explicitly validate route exchange/advertisement into OMP as required.
- Configure supported VRRP on the service-side interface with intended priorities and tracked failover behavior.
- Deploy a supported regional WAN Edge hub with service reachability, transport TLOCs, and route/policy design for the targeted branches.
Explanation
Correct Answer
B:Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites. Evidence for this new branch commissioning should include: Check OSPF neighbors, local RIB entries, OMP advertisements and the receiving remote edge's service route.
Incorrect Answers
A:That option concerns bgp service-side routing and redistribution. Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites.
C:That option concerns branch vrrp gateway redundancy. Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites. That mechanism is chiefly relevant to a different branch vrrp gateway redundancy problem: A branch LAN depends on one default gateway, and failure of its active WAN Edge should transfer gateway service to a standby edge.
D:That option concerns regional hub wan edge placement. Service-side OSPF learns local site prefixes, whereas OMP distributes appropriate service routes among SD-WAN sites. That mechanism is chiefly relevant to a different regional hub wan edge placement problem: Several branches require deterministic access to a regional hub for shared services, while overlay edge policy must remain centrally manageable.