VMware 2V0-21.23 Practice Test 23
Question 220
At a vSphere 8.x change advisory panel, administrators consider the issue titled Configure an external identity source safely. The production symptom was: A new vCenter installation cannot resolve organizational groups because its directory identity source uses the wrong endpoint. The panel requires a coherent explanation of why the issue occurs, a bounded repair that respects change approval, and a measurable post-change outcome. Other technically plausible choices concern different infrastructure problems. Select EXACTLY THREE: a governing principle, the matching corrective action and its independent acceptance condition.
- Replace or remove unsupported drivers through an authorized compliant image before re-enabling Secure Boot.
- A recovered test VCSA restores inventory and configuration against the required recovery point.
- Directory users authenticate and receive only the intended vSphere object permissions.
- Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role.
- SSO-domain decisions made at deployment affect service linkage and identity trust boundaries.
- vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges.
Explanation
Correct Answers
C:Directory users authenticate and receive only the intended vSphere object permissions. Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role. vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges.
D:Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role. vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges. Directory users authenticate and receive only the intended vSphere object permissions.
F:vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges. Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role. Directory users authenticate and receive only the intended vSphere object permissions.
Incorrect Answers
A:Replace or remove unsupported drivers through an authorized compliant image before re-enabling Secure Boot. It does not implement the governing rule for this approval: A new vCenter installation cannot resolve organizational groups because its directory identity source uses the wrong endpoint. Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role. Directory users authenticate and receive only the intended vSphere object permissions.
B:A recovered test VCSA restores inventory and configuration against the required recovery point. It would not independently demonstrate that the control works: A new vCenter installation cannot resolve organizational groups because its directory identity source uses the wrong endpoint. Directory users authenticate and receive only the intended vSphere object permissions. Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role.
E:SSO-domain decisions made at deployment affect service linkage and identity trust boundaries. It is not the rule that supports the proposed change and acceptance test: A new vCenter installation cannot resolve organizational groups because its directory identity source uses the wrong endpoint. vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges. Correct a supported least-privilege directory identity source without assuming directory group membership grants administrator role.
Question 221
A VMware vSphere 8.x architecture assessment addresses Deploy a vCenter Server Appliance with valid prerequisites. The team documents this infrastructure state: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. An administrator must distinguish the technical responsibility or mechanism before proposing configuration changes. Which single governing vSphere principle most accurately explains what is required, rather than a diagnostic or implementation step? Choose ONE answer.
- Published content libraries require correct publication settings, reachable endpoint and subscriber permissions.
- vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
- HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
- Distributed port groups control guest VLAN tagging and must match physical switch trunk allowances.
Explanation
Correct Answer
B:vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
Incorrect Answers
A:Published content libraries require correct publication settings, reachable endpoint and subscriber permissions. It does not govern the condition described: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
C:HA admission control reserves enough supported failover resources rather than merely enabling automatic restart. It does not govern the condition described: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
D:Distributed port groups control guest VLAN tagging and must match physical switch trunk allowances. It does not govern the condition described: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
Question 222
During a VMware vSphere 8.x incident investigation, a separate operations report states: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. The failure could carry this operational consequence: Improvised hostname changes after deployment can break SSO and certificates. Before any administrator applies a change, the technical team needs proof from configuration, topology or observed behavior; intuition alone is not sufficient. Which single diagnostic check best establishes the decisive condition? Choose ONE answer.
- Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity.
- Inspect cluster-to-zone mapping, workload placement preferences and available storage/network capability.
- Compare Quickstart proposed network settings, existing uplink mappings and cluster image state.
- Inspect VMkernel service flags, TCP/IP stack selection, gateways, VLANs and active routes.
Explanation
Correct Answer
A:Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
Incorrect Answers
B:Inspect cluster-to-zone mapping, workload placement preferences and available storage/network capability. That check would not establish the decisive facts for this condition: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity.
C:Compare Quickstart proposed network settings, existing uplink mappings and cluster image state. That check would not establish the decisive facts for this condition: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity.
D:Inspect VMkernel service flags, TCP/IP stack selection, gateways, VLANs and active routes. That check would not establish the decisive facts for this condition: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity.
Question 223
A change-control ticket for VMware ESXi and vCenter 8.x concerns Deploy a vCenter Server Appliance with valid prerequisites. The reported problem is: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Investigation is complete. A planned maintenance window must protect existing guests and preserve a safe rollback path. Which single supported, scoped administration action most directly resolves this condition without modifying unrelated workloads? Choose ONE answer.
- Restore supported trusted key-provider reachability and verify data recovery safeguards before encrypting VMs.
- Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
- Configure supported zone assignments and verify workload placement with the platform administrator.
- Enable authorized publication and configure scoped subscriptions without exposing confidential templates publicly.
Explanation
Correct Answer
B:Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. The VCSA completes first boot and responds through its intended FQDN with healthy management services.
Incorrect Answers
A:Restore supported trusted key-provider reachability and verify data recovery safeguards before encrypting VMs. That change would leave the reported problem unresolved: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
C:Configure supported zone assignments and verify workload placement with the platform administrator. That change would leave the reported problem unresolved: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
D:Enable authorized publication and configure scoped subscriptions without exposing confidential templates publicly. That change would leave the reported problem unresolved: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
Question 224
An operational assurance reviewer is evaluating a VMware vSphere 8.x repair after this report: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. The reason for caution is: Improvised hostname changes after deployment can break SSO and certificates. The team needs one fact-based check from BEFORE implementation and one independent observation demonstrating success AFTER the change. Select EXACTLY TWO answers with those two different roles; not two checks or two corrective actions.
- Inspect library publication state, subscription URL, network access, certificate trust and allowed identities.
- Inspect reference-host settings, host customization variables and existing profile compliance exceptions.
- Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity.
- Administrators see the planned inventory and log in consistently without leaking privileges across unintended domains.
- The VCSA completes first boot and responds through its intended FQDN with healthy management services.
Explanation
Correct Answers
C:Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. The VCSA completes first boot and responds through its intended FQDN with healthy management services. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
E:The VCSA completes first boot and responds through its intended FQDN with healthy management services. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
Incorrect Answers
A:Inspect library publication state, subscription URL, network access, certificate trust and allowed identities. It would not provide the evidence needed for the paired diagnosis and follow-up: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. The VCSA completes first boot and responds through its intended FQDN with healthy management services.
B:Inspect reference-host settings, host customization variables and existing profile compliance exceptions. It would not provide the evidence needed for the paired diagnosis and follow-up: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. The VCSA completes first boot and responds through its intended FQDN with healthy management services.
D:Administrators see the planned inventory and log in consistently without leaking privileges across unintended domains. It would not verify whether the proposed change works: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. The VCSA completes first boot and responds through its intended FQDN with healthy management services. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
Question 225
At a vSphere 8.x change advisory panel, administrators consider the issue titled Deploy a vCenter Server Appliance with valid prerequisites. The production symptom was: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. The panel requires a coherent explanation of why the issue occurs, a bounded repair that respects change approval, and a measurable post-change outcome. Other technically plausible choices concern different infrastructure problems. Select EXACTLY THREE: a governing principle, the matching corrective action and its independent acceptance condition.
- Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
- The VCSA completes first boot and responds through its intended FQDN with healthy management services.
- Apply an appropriate required or preferred rule with a documented availability exception plan.
- Normal host administration runs through approved vCenter roles and emergency access passes authorized test.
- vSphere Zones affect compatible Supervisor workload placement and require backed infrastructure/failure-domain mapping.
- vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
Explanation
Correct Answers
A:Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources. The VCSA completes first boot and responds through its intended FQDN with healthy management services.
B:The VCSA completes first boot and responds through its intended FQDN with healthy management services. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources.
F:vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow. The VCSA completes first boot and responds through its intended FQDN with healthy management services.
Incorrect Answers
C:Apply an appropriate required or preferred rule with a documented availability exception plan. It does not implement the governing rule for this approval: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow. The VCSA completes first boot and responds through its intended FQDN with healthy management services.
D:Normal host administration runs through approved vCenter roles and emergency access passes authorized test. It would not independently demonstrate that the control works: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. The VCSA completes first boot and responds through its intended FQDN with healthy management services. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
E:vSphere Zones affect compatible Supervisor workload placement and require backed infrastructure/failure-domain mapping. It is not the rule that supports the proposed change and acceptance test: The installer fails mid-deployment because DNS and network assignments are incomplete for the new VCSA. vCenter deployment relies on resolvable FQDN, supported ESXi destination, time services and adequate appliance resources. Correct infrastructure prerequisites and redeploy through the supported staged appliance workflow.
Question 226
A VMware vSphere 8.x architecture assessment addresses Configure HA admission control for host loss. The team documents this infrastructure state: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. An administrator must distinguish the technical responsibility or mechanism before proposing configuration changes. Which single governing vSphere principle most accurately explains what is required, rather than a diagnostic or implementation step? Choose ONE answer.
- Dedicated VMkernel TCP/IP stacks and routing settings determine which service path carries vMotion traffic.
- Restoring vCenter management requires consistent SSO identity and certificates, not merely restoring a VM disk.
- HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
- vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges.
Explanation
Correct Answer
C:HA admission control reserves enough supported failover resources rather than merely enabling automatic restart. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
Incorrect Answers
A:Dedicated VMkernel TCP/IP stacks and routing settings determine which service path carries vMotion traffic. It does not govern the condition described: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
B:Restoring vCenter management requires consistent SSO identity and certificates, not merely restoring a VM disk. It does not govern the condition described: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
D:vCenter authorization depends on correctly configured identity sources and separately assigned vSphere privileges. It does not govern the condition described: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
Question 227
During a VMware vSphere 8.x incident investigation, a separate operations report states: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. The failure could carry this operational consequence: Disabling admission controls to clear warnings can disguise insufficient recovery resources. Before any administrator applies a change, the technical team needs proof from configuration, topology or observed behavior; intuition alone is not sufficient. Which single diagnostic check best establishes the decisive condition? Choose ONE answer.
- Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity.
- Inspect Quick Boot compatibility reports, hardware vendor guidance and lifecycle manager remediation policy.
- Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts.
- Compare Quickstart proposed network settings, existing uplink mappings and cluster image state.
Explanation
Correct Answer
C:Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
Incorrect Answers
A:Preflight forward/reverse DNS, address allocation, credentials, NTP and target compute/storage capacity. That check would not establish the decisive facts for this condition: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts.
B:Inspect Quick Boot compatibility reports, hardware vendor guidance and lifecycle manager remediation policy. That check would not establish the decisive facts for this condition: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts.
D:Compare Quickstart proposed network settings, existing uplink mappings and cluster image state. That check would not establish the decisive facts for this condition: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts.
Question 228
A change-control ticket for VMware ESXi and vCenter 8.x concerns Configure HA admission control for host loss. The reported problem is: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Investigation is complete. A planned maintenance window must protect existing guests and preserve a safe rollback path. Which single supported, scoped administration action most directly resolves this condition without modifying unrelated workloads? Choose ONE answer.
- Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
- Correct prerequisites and perform the documented supported join workflow under change control.
- Apply an appropriate required or preferred rule with a documented availability exception plan.
- Apply a reviewed Quickstart expansion plan with host connectivity and rollback checkpoints.
Explanation
Correct Answer
A:Set a defensible admission-control policy and right-size or rebalance reservations before protection tests. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
Incorrect Answers
B:Correct prerequisites and perform the documented supported join workflow under change control. That change would leave the reported problem unresolved: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
C:Apply an appropriate required or preferred rule with a documented availability exception plan. That change would leave the reported problem unresolved: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
D:Apply a reviewed Quickstart expansion plan with host connectivity and rollback checkpoints. That change would leave the reported problem unresolved: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
Question 229
An operational assurance reviewer is evaluating a VMware vSphere 8.x repair after this report: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. The reason for caution is: Disabling admission controls to clear warnings can disguise insufficient recovery resources. The team needs one fact-based check from BEFORE implementation and one independent observation demonstrating success AFTER the change. Select EXACTLY TWO answers with those two different roles; not two checks or two corrective actions.
- A recovered test VCSA restores inventory and configuration against the required recovery point.
- Inspect namespace permissions, storage policies, class constraints, quotas and team identities.
- Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts.
- A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
- Check library publisher identity, TLS trust, synchronization settings and image signing evidence.
Explanation
Correct Answers
C:Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
D:A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
Incorrect Answers
A:A recovered test VCSA restores inventory and configuration against the required recovery point. It would not verify whether the proposed change works: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
B:Inspect namespace permissions, storage policies, class constraints, quotas and team identities. It would not provide the evidence needed for the paired diagnosis and follow-up: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
E:Check library publisher identity, TLS trust, synchronization settings and image signing evidence. It would not provide the evidence needed for the paired diagnosis and follow-up: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Compare largest-host capacity, VM reservations, policy mode and actual failover capacity alerts. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
Question 230
At a vSphere 8.x change advisory panel, administrators consider the issue titled Configure HA admission control for host loss. The production symptom was: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. The panel requires a coherent explanation of why the issue occurs, a bounded repair that respects change approval, and a measurable post-change outcome. Other technically plausible choices concern different infrastructure problems. Select EXACTLY THREE: a governing principle, the matching corrective action and its independent acceptance condition.
- Published content libraries require correct publication settings, reachable endpoint and subscriber permissions.
- A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
- HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
- Replace or remove unsupported drivers through an authorized compliant image before re-enabling Secure Boot.
- Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
- Authorized management tools connect while untrusted networks cannot reach restricted host services.
Explanation
Correct Answers
B:A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart.
C:HA admission control reserves enough supported failover resources rather than merely enabling automatic restart. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
E:Set a defensible admission-control policy and right-size or rebalance reservations before protection tests. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
Incorrect Answers
A:Published content libraries require correct publication settings, reachable endpoint and subscriber permissions. It is not the rule that supports the proposed change and acceptance test: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. HA admission control reserves enough supported failover resources rather than merely enabling automatic restart. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.
D:Replace or remove unsupported drivers through an authorized compliant image before re-enabling Secure Boot. It does not implement the governing rule for this approval: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target.
F:Authorized management tools connect while untrusted networks cannot reach restricted host services. It would not independently demonstrate that the control works: A cluster shows HA enabled but cannot restart a protected workload after losing its largest host. A controlled host-failure rehearsal restarts critical VMs on remaining capacity within target. Set a defensible admission-control policy and right-size or rebalance reservations before protection tests.