ServiceNow CIS-Discovery Practice Test 39
Question 380
A separate authorized configuration data analyst at Lighthouse Financial reopens map discovery coverage to a service outage investigation objective because a previous closeout did not prove the result. Evidence still indicates: A test incident requires tracing a failing database dependency but the resulting CMDB graph lacks that relationship. Business service continuity and CMDB evidence must be preserved throughout validation. Which TWO options together provide the treatment and a separate success measure?
- Segment discovery health reporting by priority class and repair the authorized database credential failure
- Prioritize source-backed application-to-database dependency mapping and use an approved incident replay
- The MID heartbeat becomes current and a new controlled ECC request is processed within the service target
- The replay identifies the affected application and dependent service from verified CMDB links within the agreed response time
- The sponsor accepts the pilot against recorded CI and dependency thresholds rather than number of scanned addresses
Explanation
Correct Answers
B:Prioritize source-backed application-to-database dependency mapping and use an approved incident replay. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Lighthouse Financial scenario, the observed defect is: A program buys wider scanning capacity without showing how its CMDB data helps identify failed dependencies during incidents. The causal principle is: Business value from Discovery must be tied to reliable service topology and actionable operational workflows. The proposed change must still pass this independent test: The replay identifies the affected application and dependent service from verified CMDB links within the agreed response time.
D:The replay identifies the affected application and dependent service from verified CMDB links within the agreed response time. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Lighthouse Financial scenario is: Prioritize source-backed application-to-database dependency mapping and use an approved incident replay. The prior failing observation was: A test incident requires tracing a failing database dependency but the resulting CMDB graph lacks that relationship. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:Segment discovery health reporting by priority class and repair the authorized database credential failure. The question instead centers on A program buys wider scanning capacity without showing how its CMDB data helps identify failed dependencies during incidents; the governing distinction is prioritize source-backed application-to-database dependency mapping and use an approved incident replay. Check: A test incident requires tracing a failing database dependency but the resulting CMDB graph lacks that relationship.
C:That alternative is relevant to distinguish stale mid heartbeat from an active discovery success, but the issue here is A program buys wider scanning capacity without showing how its CMDB data helps identify failed dependencies during incidents. Prioritize source-backed application-to-database dependency mapping and use an approved incident replay. Check: A test incident requires tracing a failing database dependency but the resulting CMDB graph lacks that relationship.
E:The sponsor accepts the pilot against recorded CI and dependency thresholds rather than number of scanned addresses. It concerns define a measurable discovery deployment outcome from business services, not the failure described here: A program buys wider scanning capacity without showing how its CMDB data helps identify failed dependencies during incidents. Prioritize source-backed application-to-database dependency mapping and use an approved incident replay.
Question 381
A separate authorized network services engineer at Meridian Food Systems reopens handle a discovery status error caused by blocked application reads because a previous closeout did not prove the result. Evidence still indicates: The run has successful SSH classification and a denial only for a named application configuration file. The decision must preserve approved CI source authority and relationship direction. Select TWO complementary choices: a bounded correction and an independent acceptance test.
- Specify the approved timezone per scoped schedule and validate the resulting local execution times before enabling
- IRE simulation identifies a single matching CI and the subsequent run updates its version without duplicate insertion
- Host and application fields populate under separate documented least-privileged credentials without broader grants
- Review the failed file read and request a narrow approved read permission for that specific path
- A replay updates the application fields while host identification and unrelated permissions stay unchanged
Explanation
Correct Answers
D:Review the failed file read and request a narrow approved read permission for that specific path. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Meridian Food Systems scenario, the observed defect is: A MID Server reaches the host and identifies its OS but the application pattern reports a permission-denied result. The causal principle is: A partial discovery status must be tied to the exact failed operation, not used to justify entire schedule changes. The proposed change must still pass this independent test: A replay updates the application fields while host identification and unrelated permissions stay unchanged.
E:A replay updates the application fields while host identification and unrelated permissions stay unchanged. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Meridian Food Systems scenario is: Review the failed file read and request a narrow approved read permission for that specific path. The prior failing observation was: The run has successful SSH classification and a denial only for a named application configuration file. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:That alternative is relevant to verify schedule timezone in globally distributed discovery deployments, but the issue here is A MID Server reaches the host and identifies its OS but the application pattern reports a permission-denied result. Review the failed file read and request a narrow approved read permission for that specific path. Check: The run has successful SSH classification and a denial only for a named application configuration file.
B:IRE simulation identifies a single matching CI and the subsequent run updates its version without duplicate insertion. It concerns reconcile a ci update failure due to mandatory identification data, not the failure described here: A MID Server reaches the host and identifies its OS but the application pattern reports a permission-denied result. Review the failed file read and request a narrow approved read permission for that specific path.
C:Explain missing exploration when application credentials differ from host credentials is a separate consideration. In the stated situation, A MID Server reaches the host and identifies its OS but the application pattern reports a permission-denied result. Review the failed file read and request a narrow approved read permission for that specific path. Check: The run has successful SSH classification and a denial only for a named application configuration file.
Question 382
A second security architecture reviewer at Harborstone Telecom revisits an unresolved finding during permissioned MID Server integration staging lab: A discovery target has no response records after an administrator cancels the schedule at the start of its window. A fresh run still shows: The run history records a user cancellation and no per-target ECC probe messages were generated. No test may merge distinct customer or device identities for convenience. Which principle should the reviewer use to interpret this test?
- Connectivity to a service endpoint and authenticated operation rights need separate evidence before remediation
- Identifier design must incorporate the supported class and relevant authority or domain boundary where names are not globally unique
- A missing target result is not proof of network reachability failure unless request execution actually occurred
- Discovery completion depends on request dispatch, MID execution, returned ECC output, and sensor consumption
Explanation
Correct Answer
C:A missing target result is not proof of network reachability failure unless request execution actually occurred. This is the underlying causal Discovery implementation principle for the documented fictional Harborstone Telecom case. The defect is: A discovery target has no response records after an administrator cancels the schedule at the start of its window. The governing mechanism is: A missing target result is not proof of network reachability failure unless request execution actually occurred. The supporting measured observation is: The run history records a user cancellation and no per-target ECC probe messages were generated. After treatment, the result must be checked: A permitted rerun generates target probes and produces an explicit reachable or unreachable status.
Incorrect Answers
A:That alternative is relevant to differentiate a firewall block from a missing credential on a windows host, but the issue here is A discovery target has no response records after an administrator cancels the schedule at the start of its window. A missing target result is not proof of network reachability failure unless request execution actually occurred. Check: The run history records a user cancellation and no per-target ECC probe messages were generated.
B:Identifier design must incorporate the supported class and relevant authority or domain boundary where names are not globally unique. It concerns resolve target name collisions across segregated discovery domains, not the failure described here: A discovery target has no response records after an administrator cancels the schedule at the start of its window. A missing target result is not proof of network reachability failure unless request execution actually occurred.
D:Correlate ECC input and output to distinguish queue lag is a separate consideration. In the stated situation, A discovery target has no response records after an administrator cancels the schedule at the start of its window. A missing target result is not proof of network reachability failure unless request execution actually occurred. Check: The run history records a user cancellation and no per-target ECC probe messages were generated.
Question 383
An owner-private simulated closeout at Eastridge Utilities addresses this failure: A data feed is denied when updating a CI field and the team proposes adding a new CI instead. Its independent defect indicator is: The IRE trace identifies the existing server but rejects the low-priority source's attempt to change its owner field. Uncommon but critical failure cases must be tested before closing the defect. Which TWO options form the appropriate remediation-and-verification pair?
- Create an approved ownership enrichment workflow tied to authoritative asset records and retain missing-owner exceptions
- Respect the existing CI match and request an authorized attribute update through the designated owner source
- The target appears in the supported network-device class with stable identity and preserved relevant relationships
- The original CI remains single and the disputed owner attribute changes only through permitted source authority
- An identical fixture resolves to the intended CI without duplicate insertion, and updates respect attribute authority
Explanation
Correct Answers
B:Respect the existing CI match and request an authorized attribute update through the designated owner source. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Eastridge Utilities scenario, the observed defect is: A data feed is denied when updating a CI field and the team proposes adding a new CI instead. The causal principle is: A reconciliation authorization denial on an existing matching CI is not a reason to bypass identification and insert a duplicate. The proposed change must still pass this independent test: The original CI remains single and the disputed owner attribute changes only through permitted source authority.
D:The original CI remains single and the disputed owner attribute changes only through permitted source authority. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Eastridge Utilities scenario is: Respect the existing CI match and request an authorized attribute update through the designated owner source. The prior failing observation was: The IRE trace identifies the existing server but rejects the low-priority source's attempt to change its owner field. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:Create an approved ownership enrichment workflow tied to authoritative asset records and retain missing-owner exceptions. It concerns inspect a cmdb health failure from a missing required owner field, not the failure described here: A data feed is denied when updating a CI field and the team proposes adding a new CI instead. Respect the existing CI match and request an authorized attribute update through the designated owner source.
C:Assign the correct CI class after model identification is a separate consideration. In the stated situation, A data feed is denied when updating a CI field and the team proposes adding a new CI instead. Respect the existing CI match and request an authorized attribute update through the designated owner source. Check: The IRE trace identifies the existing server but rejects the low-priority source's attempt to change its owner field.
E:An identical fixture resolves to the intended CI without duplicate insertion, and updates respect attribute authority. The question instead centers on A data feed is denied when updating a CI field and the team proposes adding a new CI instead; the governing distinction is respect the existing CI match and request an authorized attribute update through the designated owner source. Check: The IRE trace identifies the existing server but rejects the low-priority source's attempt to change its owner field.
Question 384
A second change advisory delegate at Willowbrook Payment Services revisits an unresolved finding during nonproduction Discovery regression suite: A manual import overwrites a verified hardware serial with an unvalidated free-text asset note. A fresh run still shows: The audit history shows a verified Discovery serial replaced by a different value from a lower-priority manual feed. Production-affecting actions require an independently verified change approval. Which principle should the reviewer use to interpret this test?
- Attribute reconciliation must respect the source proven authoritative for identifying fields
- Normalized identity attributes should use a documented canonical representation before CMDB identification
- CMDB governance can require both technical attributes and service ownership for accountable operations
- Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record
Explanation
Correct Answer
A:Attribute reconciliation must respect the source proven authoritative for identifying fields. This is the underlying causal Discovery implementation principle for the documented fictional Willowbrook Payment Services case. The defect is: A manual import overwrites a verified hardware serial with an unvalidated free-text asset note. The governing mechanism is: Attribute reconciliation must respect the source proven authoritative for identifying fields. The supporting measured observation is: The audit history shows a verified Discovery serial replaced by a different value from a lower-priority manual feed. After treatment, the result must be checked: A new low-priority import cannot alter the verified serial while a permitted authoritative update still succeeds.
Incorrect Answers
B:Normalized identity attributes should use a documented canonical representation before CMDB identification. It concerns track normalized serial numbers as governed ci metadata, not the failure described here: A manual import overwrites a verified hardware serial with an unvalidated free-text asset note. Attribute reconciliation must respect the source proven authoritative for identifying fields. Check: The audit history shows a verified Discovery serial replaced by a different value from a lower-priority manual feed.
C:Inspect a CMDB health failure from a missing required owner field is a separate consideration. In the stated situation, A manual import overwrites a verified hardware serial with an unvalidated free-text asset note. Attribute reconciliation must respect the source proven authoritative for identifying fields. Check: The audit history shows a verified Discovery serial replaced by a different value from a lower-priority manual feed.
D:Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record. The question instead centers on A manual import overwrites a verified hardware serial with an unvalidated free-text asset note; the governing distinction is attribute reconciliation must respect the source proven authoritative for identifying fields. Check: The audit history shows a verified Discovery serial replaced by a different value from a lower-priority manual feed.
Question 385
During synthetic CMDB reconciliation rehearsal, the MID Server operator at Clearwater Research Institute observes: A team adds broad protocol probes to a schedule even though only Linux SSH inventory is authorized for the pilot. Independent logs state: The proposed scan list includes management protocols for unrelated devices while pilot requirements permit SSH on selected hosts. Only approved target ranges and read-only lab credentials are authorized. Which ServiceNow Discovery principle BEST explains the failure? Choose ONE.
- Port and service probe configuration should reflect the approved discovery purpose and asset constraints
- Retries should not conceal authorization failures or silently bypass the approved access policy
- Sensor interpretation can fail independently of transport and authentication even when source output is correct
- Schedule windows need an explicitly understood timezone and local maintenance constraint where targets span regions
Explanation
Correct Answer
A:Port and service probe configuration should reflect the approved discovery purpose and asset constraints. This is the underlying causal Discovery implementation principle for the documented fictional Clearwater Research Institute case. The defect is: A team adds broad protocol probes to a schedule even though only Linux SSH inventory is authorized for the pilot. The governing mechanism is: Port and service probe configuration should reflect the approved discovery purpose and asset constraints. The supporting measured observation is: The proposed scan list includes management protocols for unrelated devices while pilot requirements permit SSH on selected hosts. After treatment, the result must be checked: The captured probe list contains only approved targets and services and still classifies the pilot Linux hosts.
Incorrect Answers
B:Retries should not conceal authorization failures or silently bypass the approved access policy. It concerns avoid suppressing meaningful discovery errors as successful retries, not the failure described here: A team adds broad protocol probes to a schedule even though only Linux SSH inventory is authorized for the pilot. Port and service probe configuration should reflect the approved discovery purpose and asset constraints.
C:Investigate sensor parse failure after successful credentialed connection is a separate consideration. In the stated situation, A team adds broad protocol probes to a schedule even though only Linux SSH inventory is authorized for the pilot. Port and service probe configuration should reflect the approved discovery purpose and asset constraints. Check: The proposed scan list includes management protocols for unrelated devices while pilot requirements permit SSH on selected hosts.
D:Schedule windows need an explicitly understood timezone and local maintenance constraint where targets span regions. The question instead centers on A team adds broad protocol probes to a schedule even though only Linux SSH inventory is authorized for the pilot; the governing distinction is port and service probe configuration should reflect the approved discovery purpose and asset constraints. Check: The proposed scan list includes management protocols for unrelated devices while pilot requirements permit SSH on selected hosts.
Question 386
The owner of Eastridge Utilities asks for a new risk decision after a prior correction failed to resolve this issue: A reusable pattern fires a Windows registry query against a Unix host after its conditional guard is removed. The replay still demonstrates: The execution log classifies the target as Unix but shows the registry operation was entered with no Windows guard. Use only ServiceNow assets and network access approved for the target environment. Which adverse result is supported by the available evidence?
- Duplicate dependencies can inflate downstream service impact counts
- Cross-platform command errors mask valid targets and contaminate diagnostic logs
- Premature relationship emission can leave orphaned or inaccurate CMDB dependency links
- Repeated discovery can create duplicate CIs and conflicting change histories
Explanation
Correct Answer
B:Cross-platform command errors mask valid targets and contaminate diagnostic logs. This is the plausible direct consequence of the observed failure for the documented fictional Eastridge Utilities case. The defect is: A reusable pattern fires a Windows registry query against a Unix host after its conditional guard is removed. The governing mechanism is: Pattern sections and steps require evaluated target-type conditions so inapplicable commands do not run. The supporting measured observation is: The execution log classifies the target as Unix but shows the registry operation was entered with no Windows guard. After treatment, the result must be checked: The Windows command is skipped for Unix fixtures and a matching Windows fixture still executes the intended branch.
Incorrect Answers
A:Duplicate dependencies can inflate downstream service impact counts. It concerns avoid duplicate relationship edges from repeated pattern sections, not the failure described here: A reusable pattern fires a Windows registry query against a Unix host after its conditional guard is removed. Pattern sections and steps require evaluated target-type conditions so inapplicable commands do not run. Check: The execution log classifies the target as Unix but shows the registry operation was entered with no Windows guard.
C:Run identification before attempting dependent relationship creation is a separate consideration. In the stated situation, A reusable pattern fires a Windows registry query against a Unix host after its conditional guard is removed. Pattern sections and steps require evaluated target-type conditions so inapplicable commands do not run. Check: The execution log classifies the target as Unix but shows the registry operation was entered with no Windows guard.
D:Repeated discovery can create duplicate CIs and conflicting change histories. The question instead centers on A reusable pattern fires a Windows registry query against a Unix host after its conditional guard is removed; the governing distinction is pattern sections and steps require evaluated target-type conditions so inapplicable commands do not run. Check: The execution log classifies the target as Unix but shows the registry operation was entered with no Windows guard.
Question 387
The owner of Maplecrest Manufacturing asks for a new risk decision after a prior correction failed to resolve this issue: A target has two valid credentials stored, but discovery always selects an older record that no longer has application access. The replay still demonstrates: The failed attempt uses the obsolete credential record despite a scoped current credential successfully reading the target. Uncommon but critical failure cases must be tested before closing the defect. What specific risk is most likely to follow from the described context defect?
- Overeager matching can collapse unrelated physical assets into one configuration item
- Running at the wrong time can overload targets or disrupt monitored business operations
- Repeated failures can trigger unsafe privilege escalations or misplaced outage tickets
- A sensor mapping defect can silently suppress an essential deployed service
Explanation
Correct Answer
C:Repeated failures can trigger unsafe privilege escalations or misplaced outage tickets. This is the plausible direct consequence of the observed failure for the documented fictional Maplecrest Manufacturing case. The defect is: A target has two valid credentials stored, but discovery always selects an older record that no longer has application access. The governing mechanism is: Credential selection and affinity order should be inspected before creating new privileged accounts. The supporting measured observation is: The failed attempt uses the obsolete credential record despite a scoped current credential successfully reading the target. After treatment, the result must be checked: The next run uses the approved current account and the failed old record is no longer attempted.
Incorrect Answers
A:Overeager matching can collapse unrelated physical assets into one configuration item. It concerns investigate duplicate ip assignments before altering ci identity rules, not the failure described here: A target has two valid credentials stored, but discovery always selects an older record that no longer has application access. Credential selection and affinity order should be inspected before creating new privileged accounts.
B:Apply scheduled discovery outside a constrained maintenance window is a separate consideration. In the stated situation, A target has two valid credentials stored, but discovery always selects an older record that no longer has application access. Credential selection and affinity order should be inspected before creating new privileged accounts. Check: The failed attempt uses the obsolete credential record despite a scoped current credential successfully reading the target.
D:A sensor mapping defect can silently suppress an essential deployed service. The question instead centers on A target has two valid credentials stored, but discovery always selects an older record that no longer has application access; the governing distinction is credential selection and affinity order should be inspected before creating new privileged accounts. Check: The failed attempt uses the obsolete credential record despite a scoped current credential successfully reading the target.
Question 388
The owner of Cedarline Media asks for a new risk decision after a prior correction failed to resolve this issue: A cluster discovery configuration uses a fixed single-node IP even though the active nodes change after failover. The replay still demonstrates: The current schedule finds a retired node and misses new nodes identified in the platform's approved cluster inventory. The operator may not broaden credential or subnet permissions to bypass a failed test. Which outcome is directly supported if the issue remains unresolved?
- Queue backlog can create false target timeout diagnoses and repeat work
- Wrong worker placement produces false reachability failures and encourages unnecessary firewall changes
- Stale target definitions create false asset counts and missing configuration items
- Treating host success as application success produces incomplete dependency and version data
Explanation
Correct Answer
C:Stale target definitions create false asset counts and missing configuration items. This is the plausible direct consequence of the observed failure for the documented fictional Cedarline Media case. The defect is: A cluster discovery configuration uses a fixed single-node IP even though the active nodes change after failover. The governing mechanism is: Cluster coverage should use supported authorized membership and address scope rather than assuming one endpoint represents the fleet. The supporting measured observation is: The current schedule finds a retired node and misses new nodes identified in the platform's approved cluster inventory. After treatment, the result must be checked: The next discovery finds active nodes and excludes the retired address without leaving the approved cluster boundary.
Incorrect Answers
A:Queue backlog can create false target timeout diagnoses and repeat work. It concerns correlate ecc input and output to distinguish queue lag, not the failure described here: A cluster discovery configuration uses a fixed single-node IP even though the active nodes change after failover. Cluster coverage should use supported authorized membership and address scope rather than assuming one endpoint represents the fleet.
B:Use discovery behaviors to route a subnet to the appropriate MID Server is a separate consideration. In the stated situation, A cluster discovery configuration uses a fixed single-node IP even though the active nodes change after failover. Cluster coverage should use supported authorized membership and address scope rather than assuming one endpoint represents the fleet. Check: The current schedule finds a retired node and misses new nodes identified in the platform's approved cluster inventory.
D:Treating host success as application success produces incomplete dependency and version data. The question instead centers on A cluster discovery configuration uses a fixed single-node IP even though the active nodes change after failover; the governing distinction is cluster coverage should use supported authorized membership and address scope rather than assuming one endpoint represents the fleet. Check: The current schedule finds a retired node and misses new nodes identified in the platform's approved cluster inventory.
Question 389
A second Discovery implementation specialist at Horizon Public Library revisits an unresolved finding during approval-gated incident investigation: A managed service provider routes two customers' discovery requests through one MID with unintended cross-tenant route access. A fresh run still shows: The route table shows one worker can reach management endpoints for both customers despite contracts requiring separation. A reviewed fault must be distinguished from a guessed cause. What Discovery implementation principle MOST directly explains the cause?
- MID installation and discovery execution should use documented service identity and minimum required operational permissions
- MID selection and network policy must preserve customer and trust-zone segmentation
- Coverage quality should be assessed by critical asset group and failure reason, not only aggregate discovery percentages
- Sustainable implementation requires named operations responsibility and a repeatable incident and change process
Explanation
Correct Answer
B:MID selection and network policy must preserve customer and trust-zone segmentation. This is the underlying causal Discovery implementation principle for the documented fictional Horizon Public Library case. The defect is: A managed service provider routes two customers' discovery requests through one MID with unintended cross-tenant route access. The governing mechanism is: MID selection and network policy must preserve customer and trust-zone segmentation. The supporting measured observation is: The route table shows one worker can reach management endpoints for both customers despite contracts requiring separation. After treatment, the result must be checked: Each customer's authorized job reaches only its own target segment and separate logs prove isolation.
Incorrect Answers
A:MID installation and discovery execution should use documented service identity and minimum required operational permissions. It concerns validate the mid server application identity and permissions, not the failure described here: A managed service provider routes two customers' discovery requests through one MID with unintended cross-tenant route access. MID selection and network policy must preserve customer and trust-zone segmentation.
C:Use per-target discovery errors rather than aggregate success rate is a separate consideration. In the stated situation, A managed service provider routes two customers' discovery requests through one MID with unintended cross-tenant route access. MID selection and network policy must preserve customer and trust-zone segmentation. Check: The route table shows one worker can reach management endpoints for both customers despite contracts requiring separation.
D:Sustainable implementation requires named operations responsibility and a repeatable incident and change process. The question instead centers on A managed service provider routes two customers' discovery requests through one MID with unintended cross-tenant route access; the governing distinction is mID selection and network policy must preserve customer and trust-zone segmentation. Check: The route table shows one worker can reach management endpoints for both customers despite contracts requiring separation.
Question 390
During a second independent isolated ServiceNow Discovery test instance for Northlake Cloud Services, an attempted correction to the documented failure remains unverified: A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. The governing rule is: Staged discovery rollout should gate expansion on validated reachability, identity quality, and target-owner approval. Use only ServiceNow assets and network access approved for the target environment. What observed fact most clearly distinguishes this case from an unrelated failure?
- The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved
- The failed attempt uses the obsolete credential record despite a scoped current credential successfully reading the target
- Device logs show CPU spikes synchronized with bursts from the MID Server while sequential reads succeed
- The run has successful SSH classification and a denial only for a named application configuration file
Explanation
Correct Answer
A:The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved. This is the reproducible observation that distinguishes this failure for the documented fictional Northlake Cloud Services case. The defect is: A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. The governing mechanism is: Staged discovery rollout should gate expansion on validated reachability, identity quality, and target-owner approval. The supporting measured observation is: The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved. After treatment, the result must be checked: Pilot CI and protocol tests pass before the next approved subnet is added to the effective schedule.
Incorrect Answers
B:The failed attempt uses the obsolete credential record despite a scoped current credential successfully reading the target. It concerns distinguish missing credentials from wrong account selection priority, not the failure described here: A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. Staged discovery rollout should gate expansion on validated reachability, identity quality, and target-owner approval.
C:Set target rate limits to protect legacy network equipment is a separate consideration. In the stated situation, A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. Staged discovery rollout should gate expansion on validated reachability, identity quality, and target-owner approval. Check: The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved.
D:The run has successful SSH classification and a denial only for a named application configuration file. The question instead centers on A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks; the governing distinction is staged discovery rollout should gate expansion on validated reachability, identity quality, and target-owner approval.