ServiceNow CIS-Discovery Practice Test 25
Question 240
The owner of Alder Point Banking asks for a new risk decision after a prior correction failed to resolve this issue: A weekly dashboard counts every CI as covered although hundreds have not been successfully rediscovered for months. The replay still demonstrates: The CI list is large but the last-discovered timestamps for a critical subnet predate a network reconfiguration. Uncommon but critical failure cases must be tested before closing the defect. Which outcome is directly supported if the issue remains unresolved?
- Corrupted identifiers can misassociate devices and bypass duplicate prevention
- Format drift can create false duplicates and fragment asset ownership
- IP-only matching inflates CMDB inventory and fractures incident history
- Stale inventory can mislead security planning and change risk analysis
Explanation
Correct Answer
D:Stale inventory can mislead security planning and change risk analysis. This is the plausible direct consequence of the observed failure for the documented fictional Alder Point Banking case. The defect is: A weekly dashboard counts every CI as covered although hundreds have not been successfully rediscovered for months. The governing mechanism is: Coverage and health should include recent successful source observations rather than raw CI record counts. The supporting measured observation is: The CI list is large but the last-discovered timestamps for a critical subnet predate a network reconfiguration. After treatment, the result must be checked: The reviewed population meets its approved discovery-age limit or has recorded exceptions with owners.
Incorrect Answers
A:Corrupted identifiers can misassociate devices and bypass duplicate prevention. The question instead centers on A weekly dashboard counts every CI as covered although hundreds have not been successfully rediscovered for months; the governing distinction is coverage and health should include recent successful source observations rather than raw CI record counts. Check: The CI list is large but the last-discovered timestamps for a critical subnet predate a network reconfiguration.
B:That alternative is relevant to track normalized serial numbers as governed ci metadata, but the issue here is A weekly dashboard counts every CI as covered although hundreds have not been successfully rediscovered for months. Coverage and health should include recent successful source observations rather than raw CI record counts. Check: The CI list is large but the last-discovered timestamps for a critical subnet predate a network reconfiguration.
C:IP-only matching inflates CMDB inventory and fractures incident history. It concerns use ire identification rules to prevent ci duplication on ip changes, not the failure described here: A weekly dashboard counts every CI as covered although hundreds have not been successfully rediscovered for months. Coverage and health should include recent successful source observations rather than raw CI record counts. Check: The CI list is large but the last-discovered timestamps for a critical subnet predate a network reconfiguration.
Question 241
An owner-private simulated closeout at Cedarline Media addresses this failure: A custom pattern guesses the dependent server from an application configuration label rather than a verified connection endpoint. Its independent defect indicator is: The config names db-prod but observed connections go to a separate cluster virtual address. Business service continuity and CMDB evidence must be preserved throughout validation. Choose TWO: one approved intervention and one reproducible outcome check.
- Guard fallback execution on missing or invalid owner values and retain source precedence
- The extracted version matches one intended line and ignores subsequent warnings in regression fixtures
- Resolve the configured alias through approved evidence and map the actual connection endpoint under the correct relationship type
- Repeated controlled runs maintain exactly one correct typed relationship between the intended CI pair
- The resulting topology matches verified endpoint records and does not create a link to the unrelated host
Explanation
Correct Answers
C:Resolve the configured alias through approved evidence and map the actual connection endpoint under the correct relationship type. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Cedarline Media scenario, the observed defect is: A custom pattern guesses the dependent server from an application configuration label rather than a verified connection endpoint. The causal principle is: Relationship discovery should use observed endpoints or approved configuration semantics and validate ambiguous aliases. The proposed change must still pass this independent test: The resulting topology matches verified endpoint records and does not create a link to the unrelated host.
E:The resulting topology matches verified endpoint records and does not create a link to the unrelated host. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Cedarline Media scenario is: Resolve the configured alias through approved evidence and map the actual connection endpoint under the correct relationship type. The prior failing observation was: The config names db-prod but observed connections go to a separate cluster virtual address. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:That alternative is relevant to avoid overwriting a verified attribute with a later fallback match, but the issue here is A custom pattern guesses the dependent server from an application configuration label rather than a verified connection endpoint. Resolve the configured alias through approved evidence and map the actual connection endpoint under the correct relationship type. Check: The config names db-prod but observed connections go to a separate cluster virtual address.
B:The extracted version matches one intended line and ignores subsequent warnings in regression fixtures. It concerns capture multiline service metadata with a bounded match, not the failure described here: A custom pattern guesses the dependent server from an application configuration label rather than a verified connection endpoint. Resolve the configured alias through approved evidence and map the actual connection endpoint under the correct relationship type.
D:Avoid duplicate relationship edges from repeated pattern sections is a separate consideration. In the stated situation, A custom pattern guesses the dependent server from an application configuration label rather than a verified connection endpoint. Resolve the configured alias through approved evidence and map the actual connection endpoint under the correct relationship type. Check: The config names db-prod but observed connections go to a separate cluster virtual address.
Question 242
During internal Discovery implementation review, the application pattern reviewer at Meridian Food Systems observes: A CMDB integrator assumes a reconciliation rule prevents a new CI insert and skips validating identification fields. Independent logs state: The IRE trace shows no match and inserts a new CI; a reconciliation rule was only evaluated for updates. A reviewed fault must be distinguished from a guessed cause. Which principle should the reviewer use to interpret this test?
- A reconciliation authorization denial on an existing matching CI is not a reason to bypass identification and insert a duplicate
- Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record
- A controlled reclassification must evaluate inherited fields and supported relationships rather than only class labels
- Relationship type and direction must reflect supported service dependency semantics, not just connected endpoints
Explanation
Correct Answer
B:Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record. This is the underlying causal Discovery implementation principle for the documented fictional Meridian Food Systems case. The defect is: A CMDB integrator assumes a reconciliation rule prevents a new CI insert and skips validating identification fields. The governing mechanism is: Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record. The supporting measured observation is: The IRE trace shows no match and inserts a new CI; a reconciliation rule was only evaluated for updates. After treatment, the result must be checked: An identical fixture resolves to the intended CI without duplicate insertion, and updates respect attribute authority.
Incorrect Answers
A:That alternative is relevant to separate an unauthorized update attempt from a missing matching ci, but the issue here is A CMDB integrator assumes a reconciliation rule prevents a new CI insert and skips validating identification fields. Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record. Check: The IRE trace shows no match and inserts a new CI; a reconciliation rule was only evaluated for updates.
C:A controlled reclassification must evaluate inherited fields and supported relationships rather than only class labels. It concerns preserve relationship evidence when an application ci is reclassified, not the failure described here: A CMDB integrator assumes a reconciliation rule prevents a new CI insert and skips validating identification fields. Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record.
D:Avoid wrong relationship direction in a discovered service dependency is a separate consideration. In the stated situation, A CMDB integrator assumes a reconciliation rule prevents a new CI insert and skips validating identification fields. Identification decides whether a CI already exists; reconciliation governs allowed updates to an identified existing record. Check: The IRE trace shows no match and inserts a new CI; a reconciliation rule was only evaluated for updates.
Question 243
A separate authorized configuration data analyst at Greenford University reopens trace a mid server response that remains unprocessed in ecc because a previous closeout did not prove the result. Evidence still indicates: MID logs show a successful response attached to an ECC input record that remains unprocessed in the instance. Business service continuity and CMDB evidence must be preserved throughout validation. Which TWO options form the appropriate remediation-and-verification pair?
- Compare raw pattern objects with sensor payload construction and preserve separate instance keys
- Correlate the request and response IDs, inspect ECC processing errors, and clear only the verified processing fault
- The run ledger proves only the named customer's approved hosts were probed
- The response is consumed once and produces the expected class and CI update without resending unrelated scans
- The two customer assets remain distinct while each can be rediscovered without creating more duplicates
Explanation
Correct Answers
B:Correlate the request and response IDs, inspect ECC processing errors, and clear only the verified processing fault. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Greenford University scenario, the observed defect is: A discovery scan request reaches a MID Server and yields output, but the instance never records a discovered CI. The causal principle is: Request execution and instance-side ECC response processing are separate lifecycle steps requiring correlated status. The proposed change must still pass this independent test: The response is consumed once and produces the expected class and CI update without resending unrelated scans.
D:The response is consumed once and produces the expected class and CI update without resending unrelated scans. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Greenford University scenario is: Correlate the request and response IDs, inspect ECC processing errors, and clear only the verified processing fault. The prior failing observation was: MID logs show a successful response attached to an ECC input record that remains unprocessed in the instance. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:Compare raw pattern objects with sensor payload construction and preserve separate instance keys. It concerns inspect sensor interpretation when two services share a host, not the failure described here: A discovery scan request reaches a MID Server and yields output, but the instance never records a discovered CI. Correlate the request and response IDs, inspect ECC processing errors, and clear only the verified processing fault.
C:Use schedule-specific domain or network permissions is a separate consideration. In the stated situation, A discovery scan request reaches a MID Server and yields output, but the instance never records a discovered CI. Correlate the request and response IDs, inspect ECC processing errors, and clear only the verified processing fault. Check: MID logs show a successful response attached to an ECC input record that remains unprocessed in the instance.
E:The two customer assets remain distinct while each can be rediscovered without creating more duplicates. The question instead centers on A discovery scan request reaches a MID Server and yields output, but the instance never records a discovered CI; the governing distinction is correlate the request and response IDs, inspect ECC processing errors, and clear only the verified processing fault. Check: MID logs show a successful response attached to an ECC input record that remains unprocessed in the instance.
Question 244
An owner-private simulated closeout at Brookhaven Freight addresses this failure: A custom Unix pattern references the application_home variable in a later step even though the earlier command returned an empty value. Its independent defect indicator is: The debug trace records an empty application_home variable before a file-read command attempts the nonexistent path. The operator may not broaden credential or subnet permissions to bypass a failed test. Choose TWO: one approved intervention and one reproducible outcome check.
- Inspect the previous step result and correct the assignment or validation condition before the dependent read
- Filter nonservice interfaces and validate selected addresses against the documented target interface criteria
- A replay shows application_home populated from the expected field and the next step reads the approved file
- Old and new fixture strings produce the corresponding version without consuming unrelated numeric fields
- A controlled full replay updates the correct CI and expected relationships with matching source evidence
Explanation
Correct Answers
A:Inspect the previous step result and correct the assignment or validation condition before the dependent read. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Brookhaven Freight scenario, the observed defect is: A custom Unix pattern references the application_home variable in a later step even though the earlier command returned an empty value. The causal principle is: A dependent pattern step must consume an actually populated variable from the correct preceding operation rather than assume a value exists. The proposed change must still pass this independent test: A replay shows application_home populated from the expected field and the next step reads the approved file.
C:A replay shows application_home populated from the expected field and the next step reads the approved file. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Brookhaven Freight scenario is: Inspect the previous step result and correct the assignment or validation condition before the dependent read. The prior failing observation was: The debug trace records an empty application_home variable before a file-read command attempts the nonexistent path. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
B:Separate IPv4 addresses from a noisy interface enumeration is a separate consideration. In the stated situation, A custom Unix pattern references the application_home variable in a later step even though the earlier command returned an empty value. Inspect the previous step result and correct the assignment or validation condition before the dependent read. Check: The debug trace records an empty application_home variable before a file-read command attempts the nonexistent path.
D:Old and new fixture strings produce the corresponding version without consuming unrelated numeric fields. The question instead centers on A custom Unix pattern references the application_home variable in a later step even though the earlier command returned an empty value; the governing distinction is inspect the previous step result and correct the assignment or validation condition before the dependent read. Check: The debug trace records an empty application_home variable before a file-read command attempts the nonexistent path.
E:That alternative is relevant to validate a pattern correction with source and target evidence, but the issue here is A custom Unix pattern references the application_home variable in a later step even though the earlier command returned an empty value. Inspect the previous step result and correct the assignment or validation condition before the dependent read. Check: The debug trace records an empty application_home variable before a file-read command attempts the nonexistent path.
Question 245
A separate authorized Discovery operations lead at Norwood Retail Cooperative reopens include the cmdb data steward in discovery acceptance because a previous closeout did not prove the result. Evidence still indicates: Discovery logs are green but the steward's sampling finds unapproved duplicate identities and wrong relationship direction. Only approved target ranges and read-only lab credentials are authorized. Select TWO complementary choices: a bounded correction and an independent acceptance test.
- Set joint acceptance tests for CI identity, class, relationship and source authority before closing the rollout
- Assign eligible segregated MID resources or verified isolated routes and bind schedules to customer context
- The data steward signs off sampled CIs and any remaining defects have owned remediation tickets
- The sponsor accepts the pilot against recorded CI and dependency thresholds rather than number of scanned addresses
- The next site run uses the approved current credential and target-level authentication errors clear
Explanation
Correct Answers
A:Set joint acceptance tests for CI identity, class, relationship and source authority before closing the rollout. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Norwood Retail Cooperative scenario, the observed defect is: A technical team declares a Discovery implementation successful because commands finish while CI class owners reject the resulting relationships. The causal principle is: Deployment acceptance needs both target access proof and CMDB data-quality ownership validation. The proposed change must still pass this independent test: The data steward signs off sampled CIs and any remaining defects have owned remediation tickets.
C:The data steward signs off sampled CIs and any remaining defects have owned remediation tickets. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Norwood Retail Cooperative scenario is: Set joint acceptance tests for CI identity, class, relationship and source authority before closing the rollout. The prior failing observation was: Discovery logs are green but the steward's sampling finds unapproved duplicate identities and wrong relationship direction. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
B:Assign eligible segregated MID resources or verified isolated routes and bind schedules to customer context. The question instead centers on A technical team declares a Discovery implementation successful because commands finish while CI class owners reject the resulting relationships; the governing distinction is set joint acceptance tests for CI identity, class, relationship and source authority before closing the rollout.
D:That alternative is relevant to define a measurable discovery deployment outcome from business services, but the issue here is A technical team declares a Discovery implementation successful because commands finish while CI class owners reject the resulting relationships. Set joint acceptance tests for CI identity, class, relationship and source authority before closing the rollout. Check: Discovery logs are green but the steward's sampling finds unapproved duplicate identities and wrong relationship direction.
E:The next site run uses the approved current credential and target-level authentication errors clear. It concerns maintain discovery credential rotation without hidden outages, not the failure described here: A technical team declares a Discovery implementation successful because commands finish while CI class owners reject the resulting relationships. Set joint acceptance tests for CI identity, class, relationship and source authority before closing the rollout.
Question 246
The owner of Eastgate Hospitality asks for a new risk decision after a prior correction failed to resolve this issue: A device responds to SSH but never receives the expected server class, and the team edits an application pattern. The replay still demonstrates: The ECC trace shows a completed SSH probe and a failed classifier response with no horizontal pattern execution. Only approved target ranges and read-only lab credentials are authorized. Which outcome is directly supported if the issue remains unresolved?
- Misleading pass status can normalize unsafe access and break audit trail expectations
- An orphaned classifier path prevents accurate CMDB population despite working credentials
- A classifier failure can block an otherwise healthy pattern from running at all
- Network rerouting cannot fix a stale protocol credential and may introduce exposure
Explanation
Correct Answer
C:A classifier failure can block an otherwise healthy pattern from running at all. This is the plausible direct consequence of the observed failure for the documented fictional Eastgate Hospitality case. The defect is: A device responds to SSH but never receives the expected server class, and the team edits an application pattern. The governing mechanism is: Classification chooses the target class before its identification and exploration pattern can be selected. The supporting measured observation is: The ECC trace shows a completed SSH probe and a failed classifier response with no horizontal pattern execution. After treatment, the result must be checked: The same test target is classified correctly and invokes the expected identification and exploration pattern.
Incorrect Answers
A:Misleading pass status can normalize unsafe access and break audit trail expectations. The question instead centers on A device responds to SSH but never receives the expected server class, and the team edits an application pattern; the governing distinction is classification chooses the target class before its identification and exploration pattern can be selected. Check: The ECC trace shows a completed SSH probe and a failed classifier response with no horizontal pattern execution.
B:That alternative is relevant to trace a returned classification response with an invalid sensor mapping, but the issue here is A device responds to SSH but never receives the expected server class, and the team edits an application pattern. Classification chooses the target class before its identification and exploration pattern can be selected. Check: The ECC trace shows a completed SSH probe and a failed classifier response with no horizontal pattern execution.
D:Network rerouting cannot fix a stale protocol credential and may introduce exposure. It concerns distinguish expired snmp credentials from unreachable devices, not the failure described here: A device responds to SSH but never receives the expected server class, and the team edits an application pattern. Classification chooses the target class before its identification and exploration pattern can be selected. Check: The ECC trace shows a completed SSH probe and a failed classifier response with no horizontal pattern execution.
Question 247
A separate authorized Discovery operations lead at Riverbend Aerospace reopens avoid assuming completion from a green schedule status because a previous closeout did not prove the result. Evidence still indicates: The run closes normally but per-device statuses include authentication failures and missing pattern updates. Only approved target ranges and read-only lab credentials are authorized. Choose TWO: one approved intervention and one reproducible outcome check.
- Validate the approved username and read-only grant for the exact probe or pattern operation
- Reconcile successful classifications and CI updates with all in-scope target results and failures
- Every authorized target has a documented success or reviewed exception with testable follow-up
- The same classification signature invokes an approved current pattern and yields the required CI identity
- The intended server appears in the effective scan list while explicitly protected exclusions remain enforced
Explanation
Correct Answers
B:Reconcile successful classifications and CI updates with all in-scope target results and failures. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Riverbend Aerospace scenario, the observed defect is: The main schedule shows Completed while dozens of per-target discovery statuses are unresolved errors. The causal principle is: The schedule control status describes job lifecycle and does not by itself prove all target identification succeeded. The proposed change must still pass this independent test: Every authorized target has a documented success or reviewed exception with testable follow-up.
C:Every authorized target has a documented success or reviewed exception with testable follow-up. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Riverbend Aerospace scenario is: Reconcile successful classifications and CI updates with all in-scope target results and failures. The prior failing observation was: The run closes normally but per-device statuses include authentication failures and missing pattern updates. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:That alternative is relevant to diagnose an ssh credential failure without widening discovery rights, but the issue here is The main schedule shows Completed while dozens of per-target discovery statuses are unresolved errors. Reconcile successful classifications and CI updates with all in-scope target results and failures. Check: The run closes normally but per-device statuses include authentication failures and missing pattern updates.
D:The same classification signature invokes an approved current pattern and yields the required CI identity. It concerns trace a returned classification response with an invalid sensor mapping, not the failure described here: The main schedule shows Completed while dozens of per-target discovery statuses are unresolved errors. Reconcile successful classifications and CI updates with all in-scope target results and failures.
E:Validate exclusion lists before enabling new discovery coverage is a separate consideration. In the stated situation, The main schedule shows Completed while dozens of per-target discovery statuses are unresolved errors. Reconcile successful classifications and CI updates with all in-scope target results and failures. Check: The run closes normally but per-device statuses include authentication failures and missing pattern updates.
Question 248
During isolated ServiceNow Discovery test instance, the Discovery operations lead at Alder Point Banking observes: An operations team blames slow devices after the discovery job takes four hours longer than normal. Independent logs state: Average target response times are unchanged but ECC queue wait time and worker utilization have doubled. The decision must preserve approved CI source authority and relationship direction. Which discovery and configuration-data mechanism applies to these facts?
- MID operational readiness requires recent heartbeat and capacity status in addition to historical scan success
- Rollout sequencing should account for critical service impact, authorized maintenance windows and proof from representative pilots
- MID and ECC telemetry should distinguish target latency from queue and processing congestion
- Instance connectivity, service registration, and validation must succeed before relying on a MID for discovery execution
Explanation
Correct Answer
C:MID and ECC telemetry should distinguish target latency from queue and processing congestion. This is the underlying causal Discovery implementation principle for the documented fictional Alder Point Banking case. The defect is: An operations team blames slow devices after the discovery job takes four hours longer than normal. The governing mechanism is: MID and ECC telemetry should distinguish target latency from queue and processing congestion. The supporting measured observation is: Average target response times are unchanged but ECC queue wait time and worker utilization have doubled. After treatment, the result must be checked: A representative run completes within the expected window with normal queue age and no target scope expansion.
Incorrect Answers
A:That alternative is relevant to distinguish stale mid heartbeat from an active discovery success, but the issue here is An operations team blames slow devices after the discovery job takes four hours longer than normal. MID and ECC telemetry should distinguish target latency from queue and processing congestion. Check: Average target response times are unchanged but ECC queue wait time and worker utilization have doubled.
B:Rollout sequencing should account for critical service impact, authorized maintenance windows and proof from representative pilots. It concerns choose staged rollout order based on service dependency risk, not the failure described here: An operations team blames slow devices after the discovery job takes four hours longer than normal. MID and ECC telemetry should distinguish target latency from queue and processing congestion.
D:Verify a MID Server can authenticate to its ServiceNow instance is a separate consideration. In the stated situation, An operations team blames slow devices after the discovery job takes four hours longer than normal. MID and ECC telemetry should distinguish target latency from queue and processing congestion. Check: Average target response times are unchanged but ECC queue wait time and worker utilization have doubled.
Question 249
An owner-private simulated closeout at Highland Municipal Works addresses this failure: A pattern extracts the first listening process row and mistakenly associates an unrelated process with the monitored port. Its independent defect indicator is: The test response lists a logging daemon above the target listener, and the pattern stores the daemon process ID. Uncommon but critical failure cases must be tested before closing the defect. Select TWO complementary choices: a bounded correction and an independent acceptance test.
- Use a key-aware match on InstallLocation with appropriate escaping and map the captured path explicitly
- Filter the command output by the specified service port and protocol before selecting process attributes
- The resulting topology matches verified endpoint records and does not create a link to the unrelated host
- Reordered table fixtures still identify the same target process and port with the approved mapping
- A controlled full replay updates the correct CI and expected relationships with matching source evidence
Explanation
Correct Answers
B:Filter the command output by the specified service port and protocol before selecting process attributes. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Highland Municipal Works scenario, the observed defect is: A pattern extracts the first listening process row and mistakenly associates an unrelated process with the monitored port. The causal principle is: Row selection should use a stable key or filter matching the intended service rather than record ordering. The proposed change must still pass this independent test: Reordered table fixtures still identify the same target process and port with the approved mapping.
D:Reordered table fixtures still identify the same target process and port with the approved mapping. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Highland Municipal Works scenario is: Filter the command output by the specified service port and protocol before selecting process attributes. The prior failing observation was: The test response lists a logging daemon above the target listener, and the pattern stores the daemon process ID. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:Use a key-aware match on InstallLocation with appropriate escaping and map the captured path explicitly. It concerns extract a named installation directory from a key-value response, not the failure described here: A pattern extracts the first listening process row and mistakenly associates an unrelated process with the monitored port. Filter the command output by the specified service port and protocol before selecting process attributes.
C:Use supported connection data instead of inferred hostnames is a separate consideration. In the stated situation, A pattern extracts the first listening process row and mistakenly associates an unrelated process with the monitored port. Filter the command output by the specified service port and protocol before selecting process attributes. Check: The test response lists a logging daemon above the target listener, and the pattern stores the daemon process ID.
E:A controlled full replay updates the correct CI and expected relationships with matching source evidence. The question instead centers on A pattern extracts the first listening process row and mistakenly associates an unrelated process with the monitored port; the governing distinction is filter the command output by the specified service port and protocol before selecting process attributes. Check: The test response lists a logging daemon above the target listener, and the pattern stores the daemon process ID.
Question 250
In a Discovery implementation risk workshop at Lighthouse Financial, the following behavior is documented: A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. The relevant mechanism is: MID installation and discovery execution should use documented service identity and minimum required operational permissions. The result must be reproducible against the original failed fixture and a passing control. Which adverse result is supported by the available evidence?
- Shared privileged identities reduce accountability and enlarge the impact of credential compromise
- Oversubscribed workers can delay discovery and produce misleading target timeouts
- Raw scan volume can look successful while important service dependencies remain unknown
- Incompatible workers may misprocess probes or lose supported features
Explanation
Correct Answer
A:Shared privileged identities reduce accountability and enlarge the impact of credential compromise. This is the plausible direct consequence of the observed failure for the documented fictional Lighthouse Financial case. The defect is: A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. The governing mechanism is: MID installation and discovery execution should use documented service identity and minimum required operational permissions. The supporting measured observation is: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account. After treatment, the result must be checked: The MID registers and executes authorized probes without using the shared administrator account.
Incorrect Answers
B:Oversubscribed workers can delay discovery and produce misleading target timeouts. It concerns verify mid server capacity against concurrent discovery workload, not the failure described here: A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. MID installation and discovery execution should use documented service identity and minimum required operational permissions.
C:Define a measurable Discovery deployment outcome from business services is a separate consideration. In the stated situation, A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. MID installation and discovery execution should use documented service identity and minimum required operational permissions. Check: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account.
D:Incompatible workers may misprocess probes or lose supported features. The question instead centers on A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned; the governing distinction is mID installation and discovery execution should use documented service identity and minimum required operational permissions. Check: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account.