ServiceNow CIS-Discovery Practice Test 19
Question 180
During approval-gated incident investigation, the network services engineer at Riverbend Aerospace observes: A scheduled scan appears inactive and the operator assumes application classification rules are broken. Independent logs state: No outbound port-probe request appears in the ECC queue for the selected target during the expected run window. Use only ServiceNow assets and network access approved for the target environment. Which technical explanation is supported by the Discovery log? Choose ONE.
- The discovery lifecycle begins with permitted scan requests through the MID Server and ECC queue before classification occurs
- Credential binding should follow the schedule's target and authority scope, not select any technically working login
- Pattern-based discovery can perform identification and exploration together after appropriate classification using the selected horizontal pattern
- Connectivity to a service endpoint and authenticated operation rights need separate evidence before remediation
Explanation
Correct Answer
A:The discovery lifecycle begins with permitted scan requests through the MID Server and ECC queue before classification occurs. This is the underlying causal Discovery implementation principle for the documented fictional Riverbend Aerospace case. The defect is: A scheduled scan appears inactive and the operator assumes application classification rules are broken. The governing mechanism is: The discovery lifecycle begins with permitted scan requests through the MID Server and ECC queue before classification occurs. The supporting measured observation is: No outbound port-probe request appears in the ECC queue for the selected target during the expected run window. After treatment, the result must be checked: A new run creates the expected ECC scan work and advances to classification when a permitted port is found.
Incorrect Answers
B:Credential binding should follow the schedule's target and authority scope, not select any technically working login. It concerns honor credential affinity for a restricted schedule, not the failure described here: A scheduled scan appears inactive and the operator assumes application classification rules are broken. The discovery lifecycle begins with permitted scan requests through the MID Server and ECC queue before classification occurs.
C:Separate horizontal pattern exploration from obsolete probe assumptions is a separate consideration. In the stated situation, A scheduled scan appears inactive and the operator assumes application classification rules are broken. The discovery lifecycle begins with permitted scan requests through the MID Server and ECC queue before classification occurs. Check: No outbound port-probe request appears in the ECC queue for the selected target during the expected run window.
D:Connectivity to a service endpoint and authenticated operation rights need separate evidence before remediation. The question instead centers on A scheduled scan appears inactive and the operator assumes application classification rules are broken; the governing distinction is the discovery lifecycle begins with permitted scan requests through the MID Server and ECC queue before classification occurs. Check: No outbound port-probe request appears in the ECC queue for the selected target during the expected run window.
Question 181
A second pattern designer at Cedarline Media revisits an unresolved finding during read-only asset coverage assessment: A Windows software pattern stores the display label in install_path when a command returns both Name and InstallLocation fields. A fresh run still shows: The raw command has Name=AtlasAgent and InstallLocation=C:\\Program Files\\Atlas while the mapped path equals AtlasAgent. The operator may not broaden credential or subnet permissions to bypass a failed test. Which principle should the reviewer use to interpret this test?
- Transient connection details are not reliable identity attributes and must be mapped separately from persistent instance keys
- Multiline parsing should be anchored to the target field and bounded by expected row or section delimiters
- Field extraction should match a stable named key and validate the value type before mapping a CI attribute
- Relationship discovery should use observed endpoints or approved configuration semantics and validate ambiguous aliases
Explanation
Correct Answer
C:Field extraction should match a stable named key and validate the value type before mapping a CI attribute. This is the underlying causal Discovery implementation principle for the documented fictional Cedarline Media case. The defect is: A Windows software pattern stores the display label in install_path when a command returns both Name and InstallLocation fields. The governing mechanism is: Field extraction should match a stable named key and validate the value type before mapping a CI attribute. The supporting measured observation is: The raw command has Name=AtlasAgent and InstallLocation=C:\\Program Files\\Atlas while the mapped path equals AtlasAgent. After treatment, the result must be checked: A fixture with both fields populates the correct path and does not mistake the application name for a location.
Incorrect Answers
A:Transient connection details are not reliable identity attributes and must be mapped separately from persistent instance keys. It concerns distinguish database client endpoints from database instance identity, not the failure described here: A Windows software pattern stores the display label in install_path when a command returns both Name and InstallLocation fields. Field extraction should match a stable named key and validate the value type before mapping a CI attribute.
B:Capture multiline service metadata with a bounded match is a separate consideration. In the stated situation, A Windows software pattern stores the display label in install_path when a command returns both Name and InstallLocation fields. Field extraction should match a stable named key and validate the value type before mapping a CI attribute. Check: The raw command has Name=AtlasAgent and InstallLocation=C:\\Program Files\\Atlas while the mapped path equals AtlasAgent.
D:Relationship discovery should use observed endpoints or approved configuration semantics and validate ambiguous aliases. The question instead centers on A Windows software pattern stores the display label in install_path when a command returns both Name and InstallLocation fields; the governing distinction is field extraction should match a stable named key and validate the value type before mapping a CI attribute. Check: The raw command has Name=AtlasAgent and InstallLocation=C:\\Program Files\\Atlas while the mapped path equals AtlasAgent.
Question 182
An owner-private simulated closeout at Maplecrest Manufacturing addresses this failure: A pattern incorrectly matches a similarly named configuration file because the expected path contains dots and brackets treated as regex syntax. Its independent defect indicator is: The fixture has config[prod].ini and config-prod.ini, and the match selects the second file. The decision must preserve approved CI source authority and relationship direction. Which TWO options together provide the treatment and a separate success measure?
- Separate the extraction variables and explicitly map the approved stable identifier to the target CI class
- Absent-field fixtures retain the prior CI value while present-field fixtures update it to the parsed build
- Escape literal metacharacters or use an exact path comparison against the approved configuration location
- Multiple client sessions update the same database CI while connections preserve their observed endpoints
- The test selects config[prod].ini and rejects similarly named paths in randomized file listings
Explanation
Correct Answers
C:Escape literal metacharacters or use an exact path comparison against the approved configuration location. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Maplecrest Manufacturing scenario, the observed defect is: A pattern incorrectly matches a similarly named configuration file because the expected path contains dots and brackets treated as regex syntax. The causal principle is: An expected literal file path must be escaped before it is used as a regular-expression search expression. The proposed change must still pass this independent test: The test selects config[prod].ini and rejects similarly named paths in randomized file listings.
E:The test selects config[prod].ini and rejects similarly named paths in randomized file listings. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Maplecrest Manufacturing scenario is: Escape literal metacharacters or use an exact path comparison against the approved configuration location. The prior failing observation was: The fixture has config[prod].ini and config-prod.ini, and the match selects the second file. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:Detect conflicting capture groups in a pattern identifier parser is a separate consideration. In the stated situation, A pattern incorrectly matches a similarly named configuration file because the expected path contains dots and brackets treated as regex syntax. Escape literal metacharacters or use an exact path comparison against the approved configuration location. Check: The fixture has config[prod].ini and config-prod.ini, and the match selects the second file.
B:Absent-field fixtures retain the prior CI value while present-field fixtures update it to the parsed build. The question instead centers on A pattern incorrectly matches a similarly named configuration file because the expected path contains dots and brackets treated as regex syntax; the governing distinction is escape literal metacharacters or use an exact path comparison against the approved configuration location.
D:That alternative is relevant to distinguish database client endpoints from database instance identity, but the issue here is A pattern incorrectly matches a similarly named configuration file because the expected path contains dots and brackets treated as regex syntax. Escape literal metacharacters or use an exact path comparison against the approved configuration location. Check: The fixture has config[prod].ini and config-prod.ini, and the match selects the second file.
Question 183
A separate authorized application pattern reviewer at Northlake Cloud Services reopens preserve a controlled pilot before enabling production schedules because a previous closeout did not prove the result. Evidence still indicates: The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved. Use only ServiceNow assets and network access approved for the target environment. Which TWO options together provide the treatment and a separate success measure?
- Keep the schedule limited to the pilot assets until the documented acceptance defects are closed
- Validate the approved classification input and rules, then replay from the failing stage
- Pilot CI and protocol tests pass before the next approved subnet is added to the effective schedule
- A replay consumes the same raw output and produces a valid class-matched CI payload
- The target is discovered with the site identity and audit logs show no use of the prohibited global account
Explanation
Correct Answers
A:Keep the schedule limited to the pilot assets until the documented acceptance defects are closed. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Northlake Cloud Services scenario, the observed defect is: A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. The causal principle is: Staged discovery rollout should gate expansion on validated reachability, identity quality, and target-owner approval. The proposed change must still pass this independent test: Pilot CI and protocol tests pass before the next approved subnet is added to the effective schedule.
C:Pilot CI and protocol tests pass before the next approved subnet is added to the effective schedule. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Northlake Cloud Services scenario is: Keep the schedule limited to the pilot assets until the documented acceptance defects are closed. The prior failing observation was: The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
B:Validate the approved classification input and rules, then replay from the failing stage. The question instead centers on A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks; the governing distinction is keep the schedule limited to the pilot assets until the documented acceptance defects are closed. Check: The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved.
D:That alternative is relevant to investigate sensor parse failure after successful credentialed connection, but the issue here is A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. Keep the schedule limited to the pilot assets until the documented acceptance defects are closed. Check: The pilot's successful-port count looks good but duplicate-CI findings and access denials remain unresolved.
E:The target is discovered with the site identity and audit logs show no use of the prohibited global account. It concerns honor credential affinity for a restricted schedule, not the failure described here: A Discovery implementation owner enables enterprise-wide recurring runs before the representative pilot completes its credential and CMDB acceptance checks. Keep the schedule limited to the pilot assets until the documented acceptance defects are closed.
Question 184
An owner-private simulated closeout at Pine Valley Insurance addresses this failure: A middleware CI receives a more specific class while its existing service dependency links disappear. Its independent defect indicator is: A before-after comparison shows the instance identifier still matches but its service relationships are absent after class change. The result must be reproducible against the original failed fixture and a passing control. Select TWO actions: correct the identified issue and independently prove it is resolved.
- Configure or enforce source precedence so asset management owns cost center while Discovery updates permitted technical attributes
- The original CI remains single and the disputed owner attribute changes only through permitted source authority
- Review class hierarchy and migration behavior with the CI owner, restoring only supported relationships
- The affected records receive documented accountable owners or remain visible in an unresolved health report
- The verified class changes without losing authorized identity or previously validated service dependencies
Explanation
Correct Answers
C:Review class hierarchy and migration behavior with the CI owner, restoring only supported relationships. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Pine Valley Insurance scenario, the observed defect is: A middleware CI receives a more specific class while its existing service dependency links disappear. The causal principle is: A controlled reclassification must evaluate inherited fields and supported relationships rather than only class labels. The proposed change must still pass this independent test: The verified class changes without losing authorized identity or previously validated service dependencies.
E:The verified class changes without losing authorized identity or previously validated service dependencies. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Pine Valley Insurance scenario is: Review class hierarchy and migration behavior with the CI owner, restoring only supported relationships. The prior failing observation was: A before-after comparison shows the instance identifier still matches but its service relationships are absent after class change. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:That alternative is relevant to apply reconciliation priority when discovery and asset management disagree, but the issue here is A middleware CI receives a more specific class while its existing service dependency links disappear. Review class hierarchy and migration behavior with the CI owner, restoring only supported relationships. Check: A before-after comparison shows the instance identifier still matches but its service relationships are absent after class change.
B:The original CI remains single and the disputed owner attribute changes only through permitted source authority. It concerns separate an unauthorized update attempt from a missing matching ci, not the failure described here: A middleware CI receives a more specific class while its existing service dependency links disappear. Review class hierarchy and migration behavior with the CI owner, restoring only supported relationships.
D:Inspect a CMDB health failure from a missing required owner field is a separate consideration. In the stated situation, A middleware CI receives a more specific class while its existing service dependency links disappear. Review class hierarchy and migration behavior with the CI owner, restoring only supported relationships. Check: A before-after comparison shows the instance identifier still matches but its service relationships are absent after class change.
Question 185
In a Discovery implementation risk workshop at Oakridge Logistics, the following behavior is documented: An asset lifecycle system owns the approved cost center but a Discovery feed overwrites it with an empty field. The relevant mechanism is: Reconciliation should enforce which authorized data source may update each CI attribute. Business service continuity and CMDB evidence must be preserved throughout validation. Which outcome is directly supported if the issue remains unresolved?
- Losing dependency edges breaks operational impact analysis while appearing to improve taxonomy
- Unowned assets may be omitted from incident routing and patch accountability
- Unauthorized attribute overwrites degrade financial and operational reporting
- A malformed payload can create missing links or unidentifiable records
Explanation
Correct Answer
C:Unauthorized attribute overwrites degrade financial and operational reporting. This is the plausible direct consequence of the observed failure for the documented fictional Oakridge Logistics case. The defect is: An asset lifecycle system owns the approved cost center but a Discovery feed overwrites it with an empty field. The governing mechanism is: Reconciliation should enforce which authorized data source may update each CI attribute. The supporting measured observation is: The asset record has a valid cost center before the Discovery update; afterward it is blank despite no approved ownership transfer. After treatment, the result must be checked: A controlled Discovery update preserves cost center and still refreshes the approved operating-system version.
Incorrect Answers
A:That alternative is relevant to preserve relationship evidence when an application ci is reclassified, but the issue here is An asset lifecycle system owns the approved cost center but a Discovery feed overwrites it with an empty field. Reconciliation should enforce which authorized data source may update each CI attribute. Check: The asset record has a valid cost center before the Discovery update; afterward it is blank despite no approved ownership transfer.
B:Unowned assets may be omitted from incident routing and patch accountability. It concerns inspect a cmdb health failure from a missing required owner field, not the failure described here: An asset lifecycle system owns the approved cost center but a Discovery feed overwrites it with an empty field. Reconciliation should enforce which authorized data source may update each CI attribute. Check: The asset record has a valid cost center before the Discovery update; afterward it is blank despite no approved ownership transfer.
D:Simulate IRE payload changes before production CI updates is a separate consideration. In the stated situation, An asset lifecycle system owns the approved cost center but a Discovery feed overwrites it with an empty field. Reconciliation should enforce which authorized data source may update each CI attribute. Check: The asset record has a valid cost center before the Discovery update; afterward it is blank despite no approved ownership transfer.
Question 186
During read-only asset coverage assessment, the change advisory delegate at Lighthouse Financial observes: A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. Independent logs state: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account. The result must be reproducible against the original failed fixture and a passing control. Which ServiceNow Discovery principle BEST explains the failure? Choose ONE.
- MID and ECC telemetry should distinguish target latency from queue and processing congestion
- MID selection and network policy must preserve customer and trust-zone segmentation
- MID installation and discovery execution should use documented service identity and minimum required operational permissions
- MID operational readiness requires recent heartbeat and capacity status in addition to historical scan success
Explanation
Correct Answer
C:MID installation and discovery execution should use documented service identity and minimum required operational permissions. This is the underlying causal Discovery implementation principle for the documented fictional Lighthouse Financial case. The defect is: A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. The governing mechanism is: MID installation and discovery execution should use documented service identity and minimum required operational permissions. The supporting measured observation is: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account. After treatment, the result must be checked: The MID registers and executes authorized probes without using the shared administrator account.
Incorrect Answers
A:That alternative is relevant to monitor ecc queue backlog and mid work completion trends, but the issue here is A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. MID installation and discovery execution should use documented service identity and minimum required operational permissions. Check: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account.
B:MID selection and network policy must preserve customer and trust-zone segmentation. It concerns choose mid server placement for separated customer management zones, not the failure described here: A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. MID installation and discovery execution should use documented service identity and minimum required operational permissions.
D:Distinguish stale MID heartbeat from an active discovery success is a separate consideration. In the stated situation, A deployment team starts a MID Server service with a powerful shared account because its intended service account was never provisioned. MID installation and discovery execution should use documented service identity and minimum required operational permissions. Check: The host service log identifies an interactive administrator login rather than the approved noninteractive MID service account.
Question 187
During a second independent nonproduction Discovery regression suite for Willowbrook Payment Services, an attempted correction to the documented failure remains unverified: A switch responds to SNMP but is assigned to a generic network class because classification does not inspect the model identifier. The governing rule is: Scanning discovers a reachable service; classification must interpret returned protocol attributes before identification. Production-affecting actions require an independently verified change approval. Which recorded artifact most directly substantiates the assessment?
- The only completed ECC artifact is a port-scan result, with no successful operating-system classifier or identity payload
- The SNMP response includes vendor and model OIDs while the classifier trace selects a generic catch-all first
- The target answers a permitted transport probe while authentication logs reject the retired SNMP credentials
- Execution history shows active scans during payment peaks and the approved maintenance calendar lists a separate window
Explanation
Correct Answer
B:The SNMP response includes vendor and model OIDs while the classifier trace selects a generic catch-all first. This is the reproducible observation that distinguishes this failure for the documented fictional Willowbrook Payment Services case. The defect is: A switch responds to SNMP but is assigned to a generic network class because classification does not inspect the model identifier. The governing mechanism is: Scanning discovers a reachable service; classification must interpret returned protocol attributes before identification. The supporting measured observation is: The SNMP response includes vendor and model OIDs while the classifier trace selects a generic catch-all first. After treatment, the result must be checked: The device receives the correct network class and subsequent discovery does not duplicate the prior CI.
Incorrect Answers
A:That alternative is relevant to explain discovery stages when a port is open but no os evidence exists, but the issue here is A switch responds to SNMP but is assigned to a generic network class because classification does not inspect the model identifier. Scanning discovers a reachable service; classification must interpret returned protocol attributes before identification. Check: The SNMP response includes vendor and model OIDs while the classifier trace selects a generic catch-all first.
C:The target answers a permitted transport probe while authentication logs reject the retired SNMP credentials. It concerns distinguish expired snmp credentials from unreachable devices, not the failure described here: A switch responds to SNMP but is assigned to a generic network class because classification does not inspect the model identifier. Scanning discovers a reachable service; classification must interpret returned protocol attributes before identification.
D:Apply scheduled discovery outside a constrained maintenance window is a separate consideration. In the stated situation, A switch responds to SNMP but is assigned to a generic network class because classification does not inspect the model identifier. Scanning discovers a reachable service; classification must interpret returned protocol attributes before identification. Check: The SNMP response includes vendor and model OIDs while the classifier trace selects a generic catch-all first.
Question 188
A separate authorized configuration data analyst at Greenford University reopens use ire identification rules to prevent ci duplication on ip changes because a previous closeout did not prove the result. Evidence still indicates: The two entries share the same approved serial and hostname history but have different current IP values. Business service continuity and CMDB evidence must be preserved throughout validation. Which TWO options form the appropriate remediation-and-verification pair?
- Compare the discovered dependency against governed relationship policy and add only the supported typed link
- Route the payload through supported IRE identification with the class-specific stable identifier
- A controlled Discovery update preserves cost center and still refreshes the approved operating-system version
- Both IP states resolve to one CI and the change is reflected in the appropriate address attribute
- The reviewed population meets its approved discovery-age limit or has recorded exceptions with owners
Explanation
Correct Answers
B:Route the payload through supported IRE identification with the class-specific stable identifier. This is the case-specific scoped correction, not a justification to expand the authorized scan or credential scope. In the fictional Greenford University scenario, the observed defect is: An endpoint switches IP addresses during DHCP renewal and a third-party feed creates a second CI for the same hardware. The causal principle is: IRE identification rules match stable identity evidence before deciding whether to insert or update a record. The proposed change must still pass this independent test: Both IP states resolve to one CI and the change is reflected in the appropriate address attribute.
D:Both IP states resolve to one CI and the change is reflected in the appropriate address attribute. This is the independently testable outcome that validates the targeted repair. The authorized change for the fictional Greenford University scenario is: Route the payload through supported IRE identification with the class-specific stable identifier. The prior failing observation was: The two entries share the same approved serial and hostname history but have different current IP values. A deployment record without this tested outcome does not prove effectiveness.
Incorrect Answers
A:Compare the discovered dependency against governed relationship policy and add only the supported typed link. It concerns detect an absent business service relationship in cmdb health, not the failure described here: An endpoint switches IP addresses during DHCP renewal and a third-party feed creates a second CI for the same hardware. Route the payload through supported IRE identification with the class-specific stable identifier.
C:Apply reconciliation priority when Discovery and asset management disagree is a separate consideration. In the stated situation, An endpoint switches IP addresses during DHCP renewal and a third-party feed creates a second CI for the same hardware. Route the payload through supported IRE identification with the class-specific stable identifier. Check: The two entries share the same approved serial and hostname history but have different current IP values.
E:The reviewed population meets its approved discovery-age limit or has recorded exceptions with owners. The question instead centers on An endpoint switches IP addresses during DHCP renewal and a third-party feed creates a second CI for the same hardware; the governing distinction is route the payload through supported IRE identification with the class-specific stable identifier. Check: The two entries share the same approved serial and hostname history but have different current IP values. For the response decision in this case, the decisive response is to route the payload through supported IRE identification with the class-specific stable identifier; Both IP states resolve to one CI and the change is reflected in the appropriate address attribute.
Question 189
In a Discovery implementation risk workshop at Copper Hill Retail, the following behavior is documented: A new integration plans to change a database instance class and relationship using an untested payload format. The relevant mechanism is: IRE identification and relationship processing should be validated in a controlled simulation before authorized production data changes. Production-affecting actions require an independently verified change approval. Which adverse result is supported by the available evidence?
- Inverted relationships can distort service maps and incident impact calculations
- IP-only matching inflates CMDB inventory and fractures incident history
- A malformed payload can create missing links or unidentifiable records
- Impact analysis can omit a critical dependency despite apparently complete records
Explanation
Correct Answer
C:A malformed payload can create missing links or unidentifiable records. This is the plausible direct consequence of the observed failure for the documented fictional Copper Hill Retail case. The defect is: A new integration plans to change a database instance class and relationship using an untested payload format. The governing mechanism is: IRE identification and relationship processing should be validated in a controlled simulation before authorized production data changes. The supporting measured observation is: The proposed payload lacks a required parent reference and dry-run identification returns an error. After treatment, the result must be checked: The tested payload identifies one expected CI and produces valid relationship mappings without unapproved writes.
Incorrect Answers
A:Inverted relationships can distort service maps and incident impact calculations. It concerns avoid wrong relationship direction in a discovered service dependency, not the failure described here: A new integration plans to change a database instance class and relationship using an untested payload format. IRE identification and relationship processing should be validated in a controlled simulation before authorized production data changes.
B:Use IRE identification rules to prevent CI duplication on IP changes is a separate consideration. In the stated situation, A new integration plans to change a database instance class and relationship using an untested payload format. IRE identification and relationship processing should be validated in a controlled simulation before authorized production data changes. Check: The proposed payload lacks a required parent reference and dry-run identification returns an error.
D:Impact analysis can omit a critical dependency despite apparently complete records. The question instead centers on A new integration plans to change a database instance class and relationship using an untested payload format; the governing distinction is iRE identification and relationship processing should be validated in a controlled simulation before authorized production data changes. Check: The proposed payload lacks a required parent reference and dry-run identification returns an error.
Question 190
The owner of Maplecrest Manufacturing asks for a new risk decision after a prior correction failed to resolve this issue: A quarterly credential rotation updates a password vault but leaves the MID's authorized credential alias pointing to an expired entry. The replay still demonstrates: The credential record has a new secret while scheduled runs still select the retired alias and fail across one site. Uncommon but critical failure cases must be tested before closing the defect. Which outcome is directly supported if the issue remains unresolved?
- A completed scan can still populate misleading operational data
- Oversubscribed workers can delay discovery and produce misleading target timeouts
- Silent credential drift can turn a healthy discovered fleet into stale records
- Misattributed delay can trigger unnecessary scan configuration changes
Explanation
Correct Answer
C:Silent credential drift can turn a healthy discovered fleet into stale records. This is the plausible direct consequence of the observed failure for the documented fictional Maplecrest Manufacturing case. The defect is: A quarterly credential rotation updates a password vault but leaves the MID's authorized credential alias pointing to an expired entry. The governing mechanism is: Operational discovery readiness includes coordinated credential lifecycle and monitored failed-authentication trends. The supporting measured observation is: The credential record has a new secret while scheduled runs still select the retired alias and fail across one site. After treatment, the result must be checked: The next site run uses the approved current credential and target-level authentication errors clear.
Incorrect Answers
A:A completed scan can still populate misleading operational data. It concerns include the cmdb data steward in discovery acceptance, not the failure described here: A quarterly credential rotation updates a password vault but leaves the MID's authorized credential alias pointing to an expired entry. Operational discovery readiness includes coordinated credential lifecycle and monitored failed-authentication trends. Check: The credential record has a new secret while scheduled runs still select the retired alias and fail across one site.
B:Verify MID Server capacity against concurrent Discovery workload is a separate consideration. In the stated situation, A quarterly credential rotation updates a password vault but leaves the MID's authorized credential alias pointing to an expired entry. Operational discovery readiness includes coordinated credential lifecycle and monitored failed-authentication trends. Check: The credential record has a new secret while scheduled runs still select the retired alias and fail across one site.
D:Misattributed delay can trigger unnecessary scan configuration changes. The question instead centers on A quarterly credential rotation updates a password vault but leaves the MID's authorized credential alias pointing to an expired entry; the governing distinction is operational discovery readiness includes coordinated credential lifecycle and monitored failed-authentication trends. Check: The credential record has a new secret while scheduled runs still select the retired alias and fail across one site.