Pure Storage FlashArray Implementation Specialist Practice Test 20
Question 190
An enterprise change review is deciding whether its response to host iscsi network prerequisites has been justified. The fictional case facts are: A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- The supplied power-cord and PSU combination must match the specific approved equipment and facility inlet interface.
- A supervised support connectivity test succeeds while unrelated outbound destinations remain restricted.
- Resolve fabric and addressing gaps before commissioning iSCSI connectivity or presenting critical volumes.
- Each intended host can reach separate approved storage paths with no accidental general-purpose exposure.
- Replace an incorrect cord through an approved supply process rather than force an incompatible connector.
- Host block access planning must validate separate initiator addressing, VLANs and multipath-capable network paths.
Explanation
Correct Answer
C:A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. Resolve fabric and addressing gaps before commissioning iSCSI connectivity or presenting critical volumes. Verify the change by checking: Each intended host can reach separate approved storage paths with no accidental general-purpose exposure. The action implements this principle: Host block access planning must validate separate initiator addressing, VLANs and multipath-capable network paths.
D:Each intended host can reach separate approved storage paths with no accidental general-purpose exposure. This shows whether the scoped response worked: Resolve fabric and addressing gaps before commissioning iSCSI connectivity or presenting critical volumes. A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. The result should be supported by this evidence: Check initiator subnets, physical redundancy, switch port assignments and storage target reachability.
F:Host block access planning must validate separate initiator addressing, VLANs and multipath-capable network paths. A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. The comparison to make is: Check initiator subnets, physical redundancy, switch port assignments and storage target reachability. That principle leads to a bounded response: Resolve fabric and addressing gaps before commissioning iSCSI connectivity or presenting critical volumes.
Incorrect Answers
A:The supplied power-cord and PSU combination must match the specific approved equipment and facility inlet interface. That is a separate power-cord connector compatibility concern; it does not explain the case: A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. The governing distinction here is: Host block access planning must validate separate initiator addressing, VLANs and multipath-capable network paths. The governing rule must instead lead to: Resolve fabric and addressing gaps before commissioning iSCSI connectivity or presenting critical volumes.
B:A supervised support connectivity test succeeds while unrelated outbound destinations remain restricted. That outcome tests a separate remoteassist connectivity and proxy rules concern, not whether the reported problem is fixed: A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. A directly relevant result would be: Each intended host can reach separate approved storage paths with no accidental general-purpose exposure. The acceptance test needs evidence from: Check initiator subnets, physical redundancy, switch port assignments and storage target reachability.
E:Replace an incorrect cord through an approved supply process rather than force an incompatible connector. That change targets a separate power-cord connector compatibility concern; the unresolved issue is: A clinic's iSCSI plan points to target interfaces in an unreachable storage VLAN. The scoped response is: Resolve fabric and addressing gaps before commissioning iSCSI connectivity or presenting critical volumes. The action should implement: Host block access planning must validate separate initiator addressing, VLANs and multipath-capable network paths.
Question 191
A hypothetical FlashArray operations change concerns fibre channel fabric and wwpn readiness in the Pre-Installation/Upgrade area. The change or incident record reports: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- Planning must use current generation-specific compatibility rules, not a procedure remembered from an older FlashArray family.
- The proposed Purity software level must be supported by the hardware and the implementation or upgrade procedure.
- Email-based operational notification requires a reachable, permitted relay and documented destination ownership.
- Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Explanation
Correct Answer
D:Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The comparison to make is: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Incorrect Answers
A:Planning must use current generation-specific compatibility rules, not a procedure remembered from an older FlashArray family. That is a separate hardware generation and model compatibility concern; it does not explain the case: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
B:The proposed Purity software level must be supported by the hardware and the implementation or upgrade procedure. That is a separate software image and release eligibility concern; it does not explain the case: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
C:Email-based operational notification requires a reachable, permitted relay and documented destination ownership. That is a separate smtp alert path planning concern; it does not explain the case: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Question 192
During FlashArray administration concerning fibre channel fabric and wwpn readiness, an operator reviews this fictional service issue: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Inspect inlet temperature readings, neighboring equipment airflow orientation and blanking-panel placement.
- Match the selected image, array model and required dependencies to release notes and official support guidance.
- Validate SMTP destination, required network policy, identity or relay requirements and the monitoring mailbox.
- Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Explanation
Correct Answer
D:An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. These observations test the rule: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Incorrect Answers
A:Inspect inlet temperature readings, neighboring equipment airflow orientation and blanking-panel placement. Those checks address a separate cooling direction and thermal headroom concern, not the specific finding: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
B:Match the selected image, array model and required dependencies to release notes and official support guidance. Those checks address a separate software image and release eligibility concern, not the specific finding: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
C:Validate SMTP destination, required network policy, identity or relay requirements and the monitoring mailbox. Those checks address a separate smtp alert path planning concern, not the specific finding: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Question 193
A change manager requests a safe and limited FlashArray response to a Pre-Installation/Upgrade problem involving fibre channel fabric and wwpn readiness. The reported situation is: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Approve reachable time sources and correct network access before relying on timestamped services.
- Select the documented procedure for those exact models or escalate a missing compatibility mapping.
- Resolve relay restrictions and recipient responsibility before enabling production email alerts.
- Correct missing identities and obtain approved fabric zoning before exposing production storage.
Explanation
Correct Answer
D:An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Correct missing identities and obtain approved fabric zoning before exposing production storage. Verify the change by checking: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target.
Incorrect Answers
A:Approve reachable time sources and correct network access before relying on timestamped services. That change targets a separate ntp and clock alignment concern; the unresolved issue is: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage.
B:Select the documented procedure for those exact models or escalate a missing compatibility mapping. That change targets a separate hardware generation and model compatibility concern; the unresolved issue is: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage.
C:Resolve relay restrictions and recipient responsibility before enabling production email alerts. That change targets a separate smtp alert path planning concern; the unresolved issue is: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Question 194
Two independent FlashArray administrator reviewers discuss fibre channel fabric and wwpn readiness. Their case record says: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Correct missing identities and obtain approved fabric zoning before exposing production storage.
- Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
- Validate SMTP destination, required network policy, identity or relay requirements and the monitoring mailbox.
- Select a documented authorized offline or restricted-support workflow and communicate feature limitations.
- Inspect shelf model, cable types, connector labeling and approved shelf topology document.
Explanation
Correct Answer
A:An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Correct missing identities and obtain approved fabric zoning before exposing production storage. Verify the change by checking: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. The change should follow this observation: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
B:An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. These observations test the rule: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. The evidence supports this limited action: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Incorrect Answers
C:Validate SMTP destination, required network policy, identity or relay requirements and the monitoring mailbox. Those checks address a separate smtp alert path planning concern, not the specific finding: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. The relevant observation must instead support: Correct missing identities and obtain approved fabric zoning before exposing production storage.
D:Select a documented authorized offline or restricted-support workflow and communicate feature limitations. That change targets a separate cloud telemetry and dark-site policy alignment concern; the unresolved issue is: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage. The authorized change must instead follow: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
E:Inspect shelf model, cable types, connector labeling and approved shelf topology document. Those checks address a separate storage enclosure shipment and cabling inventory concern, not the specific finding: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. The relevant observation must instead support: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Question 195
An enterprise change review is deciding whether its response to fibre channel fabric and wwpn readiness has been justified. The fictional case facts are: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target.
- Correct placement or approve model-suitable cable routing before committing the rack layout.
- Email-based operational notification requires a reachable, permitted relay and documented destination ownership.
- The change board can identify rollback authority, recovery steps and service-validation evidence.
- Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
- Correct missing identities and obtain approved fabric zoning before exposing production storage.
Explanation
Correct Answer
A:Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. This shows whether the scoped response worked: Correct missing identities and obtain approved fabric zoning before exposing production storage. An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The result should be supported by this evidence: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
E:Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The comparison to make is: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. That principle leads to a bounded response: Correct missing identities and obtain approved fabric zoning before exposing production storage.
F:An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. Correct missing identities and obtain approved fabric zoning before exposing production storage. Verify the change by checking: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. The action implements this principle: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Incorrect Answers
B:Correct placement or approve model-suitable cable routing before committing the rack layout. That change targets a separate service-access aisle and cable reach concern; the unresolved issue is: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage. The action should implement: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
C:Email-based operational notification requires a reachable, permitted relay and documented destination ownership. That is a separate smtp alert path planning concern; it does not explain the case: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. The governing rule must instead lead to: Correct missing identities and obtain approved fabric zoning before exposing production storage.
D:The change board can identify rollback authority, recovery steps and service-validation evidence. That outcome tests a separate operational rollback and outage authorization concern, not whether the reported problem is fixed: An exchange platform has reserved FC ports but the host HBA WWPNs are absent from the workbook. A directly relevant result would be: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. The acceptance test needs evidence from: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Question 196
A hypothetical FlashArray operations change concerns fibre channel fabric and wwpn readiness in the Pre-Installation/Upgrade area. The change or incident record reports: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Before modifying any FlashArray object, the administrator must identify the defensible operating principle. Which ONE governing principle directly applies? Choose ONE answer.
- Replication design requires distinct verified interfaces, routing and achievable bandwidth for the selected protection objective.
- Hardware commissioning depends on coordinated delivery, physical asset custody and qualified receiving checks.
- A deployment plan must include approved risk ownership and a tested stop-and-recovery path before disruptive steps.
- Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Explanation
Correct Answer
D:Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The comparison to make is: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Incorrect Answers
A:Replication design requires distinct verified interfaces, routing and achievable bandwidth for the selected protection objective. That is a separate replication network prerequisites concern; it does not explain the case: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
B:Hardware commissioning depends on coordinated delivery, physical asset custody and qualified receiving checks. That is a separate delivery window and receiving controls concern; it does not explain the case: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
C:A deployment plan must include approved risk ownership and a tested stop-and-recovery path before disruptive steps. That is a separate operational rollback and outage authorization concern; it does not explain the case: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Question 197
During FlashArray administration concerning fibre channel fabric and wwpn readiness, an operator reviews this fictional service issue: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Several explanations remain plausible until the relevant configuration and runtime evidence are checked. Which ONE specific evidence package should the administrator examine before deciding the change or diagnosis? Choose ONE answer.
- Check assigned management IPs, subnet mask, gateway, network routes and collision probes with the network owner.
- Inspect inlet temperature readings, neighboring equipment airflow orientation and blanking-panel placement.
- Inspect shelf model, cable types, connector labeling and approved shelf topology document.
- Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Explanation
Correct Answer
D:A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. These observations test the rule: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
Incorrect Answers
A:Check assigned management IPs, subnet mask, gateway, network routes and collision probes with the network owner. Those checks address a separate management ip address reservation concern, not the specific finding: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
B:Inspect inlet temperature readings, neighboring equipment airflow orientation and blanking-panel placement. Those checks address a separate cooling direction and thermal headroom concern, not the specific finding: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
C:Inspect shelf model, cable types, connector labeling and approved shelf topology document. Those checks address a separate storage enclosure shipment and cabling inventory concern, not the specific finding: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
Question 198
A change manager requests a safe and limited FlashArray response to a Pre-Installation/Upgrade problem involving fibre channel fabric and wwpn readiness. The reported situation is: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The change must follow the observed facts, preserve recovery capability and avoid unrelated service impact. Which ONE bounded administrative action best matches this case? Choose ONE answer.
- Correct missing identities and obtain approved fabric zoning before exposing production storage.
- Quarantine mismatched components and request the correct shipment or revised authorized plan.
- Schedule the change only after documenting owner sign-off, stop gates and restoration readiness.
- Hold rack installation until the placement plan and mounting space are corrected and approved.
Explanation
Correct Answer
A:A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Correct missing identities and obtain approved fabric zoning before exposing production storage. Verify the change by checking: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target.
Incorrect Answers
B:Quarantine mismatched components and request the correct shipment or revised authorized plan. That change targets a separate delivered bill of materials reconciliation concern; the unresolved issue is: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage.
C:Schedule the change only after documenting owner sign-off, stop gates and restoration readiness. That change targets a separate operational rollback and outage authorization concern; the unresolved issue is: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage.
D:Hold rack installation until the placement plan and mounting space are corrected and approved. That change targets a separate rack-unit and service-clearance validation concern; the unresolved issue is: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Question 199
Two independent FlashArray administrator reviewers discuss fibre channel fabric and wwpn readiness. Their case record says: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. One requires diagnostic evidence that can distinguish the actual issue from lookalike symptoms; the other requires a limited and approved remediation. Choose EXACTLY TWO statements that jointly provide those roles.
- Correct missing identities and obtain approved fabric zoning before exposing production storage.
- Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
- Review round-trip latency, site connectivity, independent fault domains and the approved ActiveCluster design.
- Select a documented authorized offline or restricted-support workflow and communicate feature limitations.
- Reconcile serial IDs and the customer's support eligibility with the planned change and vendor support record.
Explanation
Correct Answer
A:A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Correct missing identities and obtain approved fabric zoning before exposing production storage. Verify the change by checking: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. The change should follow this observation: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
B:A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. These observations test the rule: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. The evidence supports this limited action: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Incorrect Answers
C:Review round-trip latency, site connectivity, independent fault domains and the approved ActiveCluster design. Those checks address a separate multi-site activecluster design readiness concern, not the specific finding: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. The relevant observation must instead support: Correct missing identities and obtain approved fabric zoning before exposing production storage.
D:Select a documented authorized offline or restricted-support workflow and communicate feature limitations. That change targets a separate cloud telemetry and dark-site policy alignment concern; the unresolved issue is: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage. The authorized change must instead follow: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
E:Reconcile serial IDs and the customer's support eligibility with the planned change and vendor support record. Those checks address a separate entitlement and support-contract readiness concern, not the specific finding: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The useful observations are: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. The relevant observation must instead support: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Question 200
An enterprise change review is deciding whether its response to fibre channel fabric and wwpn readiness has been justified. The fictional case facts are: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The review needs three separate components: a sound FlashArray administration principle, a scoped authorized response, and an independent measurable success check. Choose EXACTLY THREE statements that fulfill those roles.
- Hardware commissioning depends on coordinated delivery, physical asset custody and qualified receiving checks.
- Select a documented authorized offline or restricted-support workflow and communicate feature limitations.
- Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target.
- Correct missing identities and obtain approved fabric zoning before exposing production storage.
- Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
- A documented design review and connectivity tests show the chosen site architecture meets current prerequisites.
Explanation
Correct Answer
C:Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. This shows whether the scoped response worked: Correct missing identities and obtain approved fabric zoning before exposing production storage. A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The result should be supported by this evidence: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.
D:A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. Correct missing identities and obtain approved fabric zoning before exposing production storage. Verify the change by checking: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. The action implements this principle: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
E:Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The comparison to make is: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments. That principle leads to a bounded response: Correct missing identities and obtain approved fabric zoning before exposing production storage.
Incorrect Answers
A:Hardware commissioning depends on coordinated delivery, physical asset custody and qualified receiving checks. That is a separate delivery window and receiving controls concern; it does not explain the case: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The governing distinction here is: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning. The governing rule must instead lead to: Correct missing identities and obtain approved fabric zoning before exposing production storage.
B:Select a documented authorized offline or restricted-support workflow and communicate feature limitations. That change targets a separate cloud telemetry and dark-site policy alignment concern; the unresolved issue is: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. The scoped response is: Correct missing identities and obtain approved fabric zoning before exposing production storage. The action should implement: Fibre Channel readiness depends on documented host and target identities and fault-domain-aware zoning.
F:A documented design review and connectivity tests show the chosen site architecture meets current prerequisites. That outcome tests a separate multi-site activecluster design readiness concern, not whether the reported problem is fixed: A university split-fabric design mistakenly assigns both HBA ports to one physical SAN switch. A directly relevant result would be: Hosts discover intended targets on both approved fabrics and no unintended initiator sees the target. The acceptance test needs evidence from: Compare switch zoning plan, initiator and target WWPN records and redundant fabric assignments.